summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-11drm/nv50: prevent a possible ctxprog hangBen Skeggs
The below is mainly an educated guess at what's going on, docs would sure be handy... NVIDIA? :P It appears it's possible for a ctxprog to run even while a GPU exception is pending. The GF8 and up ctxprogs appear to have a small snippet of code which detects this, and stalls the ctxprog until it's been handled, which essentially looks like: if (r2 & 0x00008000) { r0 |= 0x80000000; while (r0 & 0x80000000) {} } I don't know of any way that flag would get cleared unless the driver intervenes (and indeed, in the cases I've seen the hang, nothing steps in to automagically clear it for us). This patch causes the driver to clear the flag during the PGRAPH IRQ handler. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nouveau: have ttm's fault handler called directlyBen Skeggs
There's no good reason for us to have our own anymore, this is left over from an early port to these TTM interfaces. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nv50: restore correct cache1 get/put address on fifoctx loadBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nouveau: create function for "dealing" with gpu lockupMarcin Slusarz
It's mostly a cleanup, but in nv50_fbcon_accel_init gpu lockup message was printed, but HWACCEL_DISBALED flag was not set. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nouveau: remove unused nouveau_channel_idle() functionBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nouveau: fix handling of fbcon colours in 8bppBen Skeggs
Depending on the visual, the colours handed to us in fillrect() can either be an actual colour, or an index into the pseudo-palette. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nv04: Context switching fixes.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Use the software object for fencing.Francisco Jerez
This should avoid a race condition on nv0x, if we're doing it with actual PGRAPH objects and a there's a fence within the FIFO DMA fetch area when a context switch kicks in. In that case we get an ILLEGAL_MTHD interrupt as expected, but the values in PGRAPH_TRAPPED_ADDR aren't calculated correctly and they're almost useless (e.g. you can see ILLEGAL_MTHDs for the now inactive channel, with a wrong offset/data pair). Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Allocate a per-channel instance of NV_SW.Francisco Jerez
It will be useful for various synchronization purposes, mostly stolen from "[PATCH] drm/nv50: synchronize user channel after buffer object move on kernel channel" by Maarten Maathuis. Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nv50: make the blocksize depend on vram sizeMaarten Maathuis
- This should be better than what we have now. - I'm less sure about the non power of two path. Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
2010-01-11drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGNMaarten Maathuis
- Aligning to block size should ensure that the extra size is enough. - Using roundup, because not all sizes are powers of two. Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
2010-01-11drm/nouveau: Don't skip card take down on nv0x.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Implement nv42-nv43 TV load detection.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Clean up the nv17-nv4x load detection code a bit.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nv50: fix fillrect colorMarcin Slusarz
struct fb_fillrect->color is not a color, but index into pseudo_palette array Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nv50: ignore vbios table's claim to the contrary if EDID says >8bpcBen Skeggs
Should fix dim panel issues reported on Dell M6400/M6500. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-11drm/nouveau: Drop redundant placement initialization.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: No need to force evict=true when swapping evicted BOs back in.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Fix "general protection fault" in the flipd/flips eviction path.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/i2c/ch7006: Drop build time dependency to nouveau.Francisco Jerez
This partially reverts e4b41066, as this driver is intended to be useful with any KMS driver for suitable hardware. The missing build dependency that commit workarounded was DRM_KMS_HELPER. Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Make the MM aware of pre-G80 tiling.Francisco Jerez
This commit has also the following 3 bugfix commits squashed into it from the nouveau git tree: drm/nouveau: Fix up the tiling alignment restrictions for nv1x. drm/nouveau: Fix up the nv2x tiling alignment restrictions. drm/nv50: fix align typo for g9x Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Pre-G80 tiling support.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm/nouveau: Add cache_flush/pull fifo engine functions.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-01-11drm: reduce WARN_ON to a printk.Dave Airlie
Lots of ppl keep thinking this is an oops, it was just a warning for me to see, just make it a printk now. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11drm/kms/fb: check for depth changes from userspace for resizing.Dave Airlie
If userspace (plymouth in this case) asks for a deeper depth, refuse it as well due to lack of resizing. This fixes an issue since < 32MB cards went to 8bpp and plymouth crashes on startup. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11drm: Keep disabled outputs disabled after suspend / resumeDavid John
With the current DRM code, an output that has been powered off from userspace will automatically power back on when resuming from suspend. This patch fixes this behaviour. Tested only with the Intel i915 driver on an Intel GM45 Express chipset. Signed-off-by: David John <davidjon@xenontk.org> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11drm/radeon/kms: add additional safe regs for r4xx/rs6xx and r5xxAlex Deucher
- r4xx/rs6xx: add support for extended pixel shader instruction/temp regs - r5xx: add SM3 regs Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-11TOMOYO: Remove memory pool for list elements.Tetsuo Handa
Currently, TOMOYO allocates memory for list elements from memory pool allocated by kmalloc(PAGE_SIZE). But that makes it difficult to kfree() when garbage collector is added. Thus, remove memory pool and use kmalloc(sizeof()). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2010-01-11TOMOYO: Remove memory pool for string data.Tetsuo Handa
Currently, TOMOYO allocates memory for string data from memory pool allocated by kmalloc(PAGE_SIZE). But that makes it difficult to kfree() when garbage collector is added. Thus, remove memory pool and use kmalloc(strlen()). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2010-01-11LSM: Update comment on security_sock_rcv_skbTetsuo Handa
It is not permitted to do sleeping operation inside security_sock_rcv_skb(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Serge Hallyn <serue@us.ibm.com> -- Signed-off-by: James Morris <jmorris@namei.org>
2010-01-10vxge: use pci_dma_mapping_error to test return valueDenis Kirjanov
pci_dma_mapping_error should be used to test return value of pci_map_single or pci_map_page. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-11TOMOYO: Replace rw_semaphore by mutex.Tetsuo Handa
Since readers no longer use down_read(), writers no longer need to use rw_semaphore. Replace individual rw_semaphore by single mutex. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-01-10hwmon: Make PCI device ids constantMárton Németh
The id_table field of the struct pci_driver is constant in <linux/pci.h> so it is worth to make pci_device_id also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUsYong Wang
The max junction temperature of Atom N450/D410/D510 CPUs is 100 degrees Celsius. Since these CPUs are always coupled with Intel NM10 chipset in one package, the best way to verify whether an Atom CPU is N450/D410/D510 is to check the host bridge device. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Acked-by: Huaxu Wan <huaxu.wan@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (k10temp) Blacklist more family 10h processorsClemens Ladisch
The latest version of the Revision Guide for AMD Family 10h Processors lists two more processor revisions which may be affected by erratum 319. Change the blacklisting code to correctly detect those processors, by implementing AMD's recommended algorithm. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
2010-01-10hwmon: (asus_atk0110) Add debugfs interfaceLuca Tettamanti
Expose the raw GGRP/GITM interface via debugfs. The hwmon interface is reverse engineered and the driver tends to break on newer boards... Using this interface it's possible to poke directly at the ACPI methods without the need to recompile, reducing the guesswork and the round trips needed to support a new revision of the interface. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (asus_atk0110) Refactor interface probe codeLuca Tettamanti
The behaviour is unmodified, this makes easier to override the heuristic (which is probably needed for some boards). Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10hwmon: (adt7462) Fix pin 28 monitoringRoger Blofeld
The ADT7462_PIN28_VOLT value is a 4-bit field, so the corresponding shift must be 4. Signed-off-by: Roger Blofeld <blofeldus@yahoo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-01-10xfs: Ensure we force all busy extents in range to diskDave Chinner
When we search for and find a busy extent during allocation we force the log out to ensure the extent free transaction is on disk before the allocation transaction. The current implementation has a subtle bug in it--it does not handle multiple overlapping ranges. That is, if we free lots of little extents into a single contiguous extent, then allocate the contiguous extent, the busy search code stops searching at the first extent it finds that overlaps the allocated range. It then uses the commit LSN of the transaction to force the log out to. Unfortunately, the other busy ranges might have more recent commit LSNs than the first busy extent that is found, and this results in xfs_alloc_search_busy() returning before all the extent free transactions are on disk for the range being allocated. This can lead to potential metadata corruption or stale data exposure after a crash because log replay won't replay all the extent free transactions that cover the allocation range. Modified-by: Alex Elder <aelder@sgi.com> (Dropped the "found" argument from the xfs_alloc_busysearch trace event.) Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-10xfs: Don't flush stale inodesDave Chinner
Because inodes remain in cache much longer than inode buffers do under memory pressure, we can get the situation where we have stale, dirty inodes being reclaimed but the backing storage has been freed. Hence we should never, ever flush XFS_ISTALE inodes to disk as there is no guarantee that the backing buffer is in cache and still marked stale when the flush occurs. Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-10xfs: fix timestamp handling in xfs_setattrChristoph Hellwig
We currently have some rather odd code in xfs_setattr for updating the a/c/mtime timestamps: - first we do a non-transaction update if all three are updated together - second we implicitly update the ctime for various changes instead of relying on the ATTR_CTIME flag - third we set the timestamps to the current time instead of the arguments in the iattr structure in many cases. This patch makes sure we update it in a consistent way: - always transactional - ctime is only updated if ATTR_CTIME is set or we do a size update, which is a special case - always to the times passed in from the caller instead of the current time The only non-size caller of xfs_setattr that doesn't come from the VFS is updated to set ATTR_CTIME and pass in a valid ctime value. Reported-by: Eric Blake <ebb9@byu.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-10xfs: use DECLARE_EVENT_CLASSChristoph Hellwig
Using DECLARE_EVENT_CLASS allows us to to use trace event code instead of duplicating it in the binary. This was not available before 2.6.33 so it had to be done as a separate step once the prerequisite was merged. This only requires changes to xfs_trace.h and the results are rather impressive: hch@brick:~/work/linux-2.6/obj-kvm$ size fs/xfs/xfs.o* text data bss dec hex filename 607732 41884 3616 653232 9f7b0 fs/xfs/xfs.o 1026732 41884 3808 1072424 105d28 fs/xfs/xfs.o.old Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-10ALSA: ac97: add AC97 STMicroelectronics' codecsKrzysztof Helt
Add the STMicroelectronics ST7597 codec and an unknown codec from the same manufacturer found on the Creative SB 128 card (CT4810). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-10ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklistDaniel T Chen
This model needs both 'Headphone Jack Sense' and 'Line Jack Sense' muted for audible playback, so just add it to the ad1981 jack sense blacklist. Cc: stable@kernel.org Tested-by: Pete <x41215201@gmail.com> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-10ARM: 5872/1: ARM: include needed linux/cpu.h in asm/cpu.hSantosh Shilimkar
The file arch/arm/include/asm/cpu.h needs to include 'linux/cpu.h' to meet its dependency. Otherwise when using "struct cpuinfo_arm" and including just 'asm/cpu.h' throws below error - arch/arm/include/asm/cpu.h:16: error: field 'cpu' has incomplete type To fix this otherway, one can also include both linux/cpu.h and asm/cpu.h but it shoudn't be that way. So this patch fixes this by including the linux/cpu.h in asm/cpu.h, so that including alone asm/cpu.h is enough. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-09Input: xbox - do not use GFP_KERNEL under spinlockDmitry Torokhov
xbox_play_effect() is called while holding dev->event_lock with interrupts disabled and thus may not use GFP_KERNEL when submitting urbs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-01-10ARM: 5871/1: arch/arm: Fix build failure for lpd7a404_defconfig caused by ↵Peter Hüwe
missing includes This patch fixes a build failure [1] due to missing includes This should make the arm tree build again with lpd7a404_defconfig References: http://kisskb.ellerman.id.au/kisskb/buildresult/1983329/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-10ARM: 5870/1: arch/arm: Fix build failure for defconfigs without ↵Peter Hüwe
CONFIG_ISA_DMA_API set A lot of ARM-defconfigs (those without CONFIG_ISA_DMA_API set) fail to build [1][2][3] due to the changes of the patch [PATCH] PCI: Clean up build for CONFIG_PCI_QUIRKS unset by Rafael J. Wysocki (Sat, 2 Jan 2010 22:57:24 +0100) [4] as the referenced variable 'isa_dma_bridge_buggy' in asm/dma.h is enclosed by the CONFIG_ISA_DMA_API conditional all configs without this setting fail to build. I'm not sure wether moving the condition is the right way to solve the issue, but atleast it fixes the issue :) References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983354/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1983333/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/1983337/ [4] http://lkml.org/lkml/2010/1/2/102 Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-08DRM / i915: Fix resume regression on MSI Wind U100 w/o KMSRafael J. Wysocki
Commit cbda12d77ea590082edb6d30bd342a67ebc459e0 (drm/i915: implement new pm ops for i915), among other things, removed the .suspend and .resume pointers from the struct drm_driver object in i915_drv.c, which broke resume without KMS on my MSI Wind U100. Fix this by reverting that part of commit cbda12d77ea59. [ The DRM layer will not use the class-specific suspend/resume functions if the driver is marked MODESET-aware, and conversely it will not register the PCI device if the drievr isn't so marked, so you always end up with _either_ the drm-class suspend/resume _or_ the PCI layer PM functionality, never both. - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-08Merge branch 'for_2.6.33rc_c' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
omap-fixes-for-linus
generated by cgit (git 2.34.1) at 2025-09-13 04:39:25 +0000