Age | Commit message (Collapse) | Author |
|
This is kind of last-minute, but Al Viro reported that the new
FOP_DONTCACHE flag causes memory corruption due to use-after-free
issues.
This was triggered by commit 974c5e6139db ("xfs: flag as supporting
FOP_DONTCACHE"), but that is not the underlying bug - it is just the
first user of the flag.
Vlastimil Babka suspects the underlying problem stems from the
folio_end_writeback() logic introduced in commit fb7d3bc414939
("mm/filemap: drop streaming/uncached pages when writeback completes").
The most straightforward fix would be to just revert the commit that
exposed this, but Matthew Wilcox points out that other filesystems are
also starting to enable the FOP_DONTCACHE logic, so this instead
disables that bit globally for now.
The fix will hopefully end up being trivial and we can just re-enable
this logic after more testing, but until such a time we'll have to
disable the new FOP_DONTCACHE flag.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20250525083209.GS2023217@ZenIV/
Triggered-by: 974c5e6139db ("xfs: flag as supporting FOP_DONTCACHE")
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"22 hotfixes.
13 are cc:stable and the remainder address post-6.14 issues or aren't
considered necessary for -stable kernels. 19 are for MM"
* tag 'mm-hotfixes-stable-2025-05-25-00-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mailmap: add Jarkko's employer email address
mm: fix copy_vma() error handling for hugetlb mappings
memcg: always call cond_resched() after fn()
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
mm: vmalloc: only zero-init on vrealloc shrink
mm: vmalloc: actually use the in-place vrealloc region
alloc_tag: allocate percpu counters for module tags dynamically
module: release codetag section when module load fails
mm/cma: make detection of highmem_start more robust
MAINTAINERS: add mm memory policy section
MAINTAINERS: add mm ksm section
kasan: avoid sleepable page allocation from atomic context
highmem: add folio_test_partial_kmap()
MAINTAINERS: add hung-task detector section
taskstats: fix struct taskstats breaks backward compatibility since version 15
mm/truncate: fix out-of-bounds when doing a right-aligned split
MAINTAINERS: add mm reclaim section
MAINTAINERS: update page allocator section
mm: fix VM_UFFD_MINOR == VM_SHADOW_STACK on USERFAULTFD=y && ARM64_GCS=y
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE only if THP is enabled
...
|
|
Correct spelling of platforms, various, and initial.
As flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus
psrom, as 16-bit little-endian values. However, the integer fields of
t_SROM are host byte order.
In the case of the led_mode field this results in a but which has been
addressed by commit e7e5ae71831c ("net: dlink: Correct endianness
handling of led_mode").
In the case of the remaining fields, which are updated by this patch,
I do not believe this does not result in any bugs. But it does seem
best to correctly annotate the endianness of integers.
Flagged by Sparse as:
.../dl2k.c:344:35: warning: restricted __le32 degrades to integer
Compile tested only.
No run-time change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The AF driver assigns reserved MCAM entries (for unicast, broadcast,
etc.) based on the NIXLF number. When a NIXLF is detached, these entries
are disabled.
For example,
PF NIXLF
--------------------
PF0 0
SDP-VF0 1
If the user unbinds both PF0 and SDP-VF0 interfaces and then binds them in
reverse order
PF NIXLF
---------------------
SDP-VF0 0
PF0 1
In this scenario, the PF0 unicast entry is getting corrupted because
the MCAM entry contains stale data (SDP-VF0 ucast data)
This patch resolves the issue by clearing the unicast MCAM entry during
NIXLF detach
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add the current employer email address to mailmap.
Link: https://lkml.kernel.org/r/20250523121105.15850-1-jarkko@kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Antonio Quartulli <antonio@openvpn.net>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If, during a mremap() operation for a hugetlb-backed memory mapping,
copy_vma() fails after the source vma has been duplicated and opened (ie.
vma_link() fails), the error is handled by closing the new vma. This
updates the hugetlbfs reservation counter of the reservation map which at
this point is referenced by both the source vma and the new copy. As a
result, once the new vma has been freed and copy_vma() returns, the
reservation counter for the source vma will be incorrect.
This patch addresses this corner case by clearing the hugetlb private page
reservation reference for the new vma and decrementing the reference
before closing the vma, so that vma_close() won't update the reservation
counter. This is also what copy_vma_and_data() does with the source vma
if copy_vma() succeeds, so a helper function has been added to do the
fixup in both functions.
The issue was reported by a private syzbot instance and can be reproduced
using the C reproducer in [1]. It's also a possible duplicate of public
syzbot report [2]. The WARNING report is:
============================================================
page_counter underflow: -1024 nr_pages=1024
WARNING: CPU: 0 PID: 3287 at mm/page_counter.c:61 page_counter_cancel+0xf6/0x120
Modules linked in:
CPU: 0 UID: 0 PID: 3287 Comm: repro__WARNING_ Not tainted 6.15.0-rc7+ #54 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:page_counter_cancel+0xf6/0x120
Code: ff 5b 41 5e 41 5f 5d c3 cc cc cc cc e8 f3 4f 8f ff c6 05 64 01 27 06 01 48 c7 c7 60 15 f8 85 48 89 de 4c 89 fa e8 2a a7 51 ff <0f> 0b e9 66 ff ff ff 44 89 f9 80 e1 07 38 c1 7c 9d 4c 81
RSP: 0018:ffffc900025df6a0 EFLAGS: 00010246
RAX: 2edfc409ebb44e00 RBX: fffffffffffffc00 RCX: ffff8880155f0000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff81c4a23c R09: 1ffff1100330482a
R10: dffffc0000000000 R11: ffffed100330482b R12: 0000000000000000
R13: ffff888058a882c0 R14: ffff888058a882c0 R15: 0000000000000400
FS: 0000000000000000(0000) GS:ffff88808fc53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b33e0 CR3: 00000000076d6000 CR4: 00000000000006f0
Call Trace:
<TASK>
page_counter_uncharge+0x33/0x80
hugetlb_cgroup_uncharge_counter+0xcb/0x120
hugetlb_vm_op_close+0x579/0x960
? __pfx_hugetlb_vm_op_close+0x10/0x10
remove_vma+0x88/0x130
exit_mmap+0x71e/0xe00
? __pfx_exit_mmap+0x10/0x10
? __mutex_unlock_slowpath+0x22e/0x7f0
? __pfx_exit_aio+0x10/0x10
? __up_read+0x256/0x690
? uprobe_clear_state+0x274/0x290
? mm_update_next_owner+0xa9/0x810
__mmput+0xc9/0x370
exit_mm+0x203/0x2f0
? __pfx_exit_mm+0x10/0x10
? taskstats_exit+0x32b/0xa60
do_exit+0x921/0x2740
? do_raw_spin_lock+0x155/0x3b0
? __pfx_do_exit+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0xc5/0x100
do_group_exit+0x20c/0x2c0
get_signal+0x168c/0x1720
? __pfx_get_signal+0x10/0x10
? schedule+0x165/0x360
arch_do_signal_or_restart+0x8e/0x7d0
? __pfx_arch_do_signal_or_restart+0x10/0x10
? __pfx___se_sys_futex+0x10/0x10
syscall_exit_to_user_mode+0xb8/0x2c0
do_syscall_64+0x75/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x422dcd
Code: Unable to access opcode bytes at 0x422da3.
RSP: 002b:00007ff266cdb208 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007ff266cdbcdc RCX: 0000000000422dcd
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004c7bec
RBP: 00007ff266cdb220 R08: 203a6362696c6720 R09: 203a6362696c6720
R10: 0000200000c00000 R11: 0000000000000246 R12: ffffffffffffffd0
R13: 0000000000000002 R14: 00007ffe1cb5f520 R15: 00007ff266cbb000
</TASK>
============================================================
Link: https://lkml.kernel.org/r/20250523-warning_in_page_counter_cancel-v2-1-b6df1a8cfefd@igalia.com
Link: https://people.igalia.com/rcn/kernel_logs/20250422__WARNING_in_page_counter_cancel__repro.c [1]
Link: https://lore.kernel.org/all/67000a50.050a0220.49194.048d.GAE@google.com/ [2]
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Florent Revest <revest@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I am seeing soft lockup on certain machine types when a cgroup OOMs. This
is happening because killing the process in certain machine might be very
slow, which causes the soft lockup and RCU stalls. This happens usually
when the cgroup has MANY processes and memory.oom.group is set.
Example I am seeing in real production:
[462012.244552] Memory cgroup out of memory: Killed process 3370438 (crosvm) ....
....
[462037.318059] Memory cgroup out of memory: Killed process 4171372 (adb) ....
[462037.348314] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [stat_manager-ag:1618982]
....
Quick look at why this is so slow, it seems to be related to serial flush
for certain machine types. For all the crashes I saw, the target CPU was
at console_flush_all().
In the case above, there are thousands of processes in the cgroup, and it
is soft locking up before it reaches the 1024 limit in the code (which
would call the cond_resched()). So, cond_resched() in 1024 blocks is not
sufficient.
Remove the counter-based conditional rescheduling logic and call
cond_resched() unconditionally after each task iteration, after fn() is
called. This avoids the lockup independently of how slow fn() is.
Link: https://lkml.kernel.org/r/20250523-memcg_fix-v1-1-ad3eafb60477@debian.org
Fixes: ade81479c7dd ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michael van der Westhuizen <rmikey@meta.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
folios
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL.
Link: https://lkml.kernel.org/r/1747884137-26685-1-git-send-email-yangge1116@126.com
Fixes: 04f13d241b8b ("mm: replace free hugepage folios after migration")
Signed-off-by: Ge Yang <yangge1116@126.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The common case is to grow reallocations, and since init_on_alloc will
have already zeroed the whole allocation, we only need to zero when
shrinking the allocation.
Link: https://lkml.kernel.org/r/20250515214217.619685-2-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: vmalloc: Actually use the in-place vrealloc region".
This fixes a performance regression[1] with vrealloc()[1].
The refactoring to not build a new vmalloc region only actually worked
when shrinking. Actually return the resized area when it grows. Ugh.
Link: https://lkml.kernel.org/r/20250515214217.619685-1-kees@kernel.org
Fixes: a0309faf1cb0 ("mm: vmalloc: support more granular vrealloc() sizing")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Closes: https://lore.kernel.org/all/20250515-bpf-verifier-slowdown-vwo2meju4cgp2su5ckj@6gi6ssxbnfqg [1]
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reviewed-by: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: "Erhard F." <erhard_f@mailbox.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a module gets unloaded it checks whether any of its tags are still in
use and if so, we keep the memory containing module's allocation tags
alive until all tags are unused. However percpu counters referenced by
the tags are freed by free_module(). This will lead to UAF if the memory
allocated by a module is accessed after module was unloaded.
To fix this we allocate percpu counters for module allocation tags
dynamically and we keep it alive for tags which are still in use after
module unloading. This also removes the requirement of a larger
PERCPU_MODULE_RESERVE when memory allocation profiling is enabled because
percpu memory for counters does not need to be reserved anymore.
Link: https://lkml.kernel.org/r/20250517000739.5930-1-surenb@google.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Tested-by: David Wang <00107082@163.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When module load fails after memory for codetag section is ready, codetag
section memory will not be properly released. This causes memory leak,
and if next module load happens to get the same module address, codetag
may pick the uninitialized section when manipulating tags during module
unload, and leads to "unable to handle page fault" BUG.
Link: https://lkml.kernel.org/r/20250519163823.7540-1-00107082@163.com
Fixes: 0db6f8d7820a ("alloc_tag: load module tags into separate contiguous memory")
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Signed-off-by: David Wang <00107082@163.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pratyush Yadav reports the following crash:
------------[ cut here ]------------
kernel BUG at arch/x86/mm/physaddr.c:23!
ception 0x06 IP 10:ffffffff812ebbf8 error 0 cr2 0xffff88903ffff000
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc6+ #231 PREEMPT(undef)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:__phys_addr+0x58/0x60
Code: 01 48 89 c2 48 d3 ea 48 85 d2 75 05 e9 91 52 cf 00 0f 0b 48 3d ff ff ff 1f 77 0f 48 8b 05 20 54 55 01 48 01 d0 e9 78 52 cf 00 <0f> 0b 90 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0000:ffffffff82803dd8 EFLAGS: 00010006 ORIG_RAX: 0000000000000000
RAX: 000000007fffffff RBX: 00000000ffffffff RCX: 0000000000000000
RDX: 000000007fffffff RSI: 0000000280000000 RDI: ffffffffffffffff
RBP: ffffffff82803e68 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff83153180 R11: ffffffff82803e48 R12: ffffffff83c9aed0
R13: 0000000000000000 R14: 0000001040000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:0000000000000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88903ffff000 CR3: 0000000002838000 CR4: 00000000000000b0
Call Trace:
<TASK>
? __cma_declare_contiguous_nid+0x6e/0x340
? cma_declare_contiguous_nid+0x33/0x70
? dma_contiguous_reserve_area+0x2f/0x70
? setup_arch+0x6f1/0x870
? start_kernel+0x52/0x4b0
? x86_64_start_reservations+0x29/0x30
? x86_64_start_kernel+0x7c/0x80
? common_startup_64+0x13e/0x141
The reason is that __cma_declare_contiguous_nid() does:
highmem_start = __pa(high_memory - 1) + 1;
If dma_contiguous_reserve_area() (or any other CMA declaration) is
called before free_area_init(), high_memory is uninitialized. Without
CONFIG_DEBUG_VIRTUAL, it will likely work but use the wrong value for
highmem_start.
The issue occurs because commit e120d1bc12da ("arch, mm: set high_memory
in free_area_init()") moved initialization of high_memory after the call
to dma_contiguous_reserve() -> __cma_declare_contiguous_nid() on several
architectures.
In the case CONFIG_HIGHMEM is enabled, some architectures that actually
support HIGHMEM (arm, powerpc and x86) have initialization of high_memory
before a possible call to __cma_declare_contiguous_nid() and some
initialized high_memory late anyway (arc, csky, microblase, mips, sparc,
xtensa) even before the commit e120d1bc12da so they are fine with using
uninitialized value of high_memory.
And in the case CONFIG_HIGHMEM is disabled high_memory essentially becomes
the first address after memory end, so instead of relying on high_memory
to calculate highmem_start use memblock_end_of_DRAM() and eliminate the
dependency of CMA area creation on high_memory in majority of
configurations.
Link: https://lkml.kernel.org/r/20250519171805.1288393-1-rppt@kernel.org
Fixes: e120d1bc12da ("arch, mm: set high_memory in free_area_init()")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do a bit of readability spring cleaning:
- Fix misaligned structure member in perf_addr_filter: the new
struct perf_addr_filter::action member was too long, but when
it was added it was not aligned properly. Align all fields to
the customary column 41 alignment of most of the rest of the
header.
- Adjust the vertical alignment of the definition of other
structures and definitions as well, so that the 'most of' in
the previous paragraph changes to 'all of'. ;-)
- Prettify the assignments in perf_clear_branch_entry_bitfields()
- Move comments from CPP definitions to outside the macro
- Move perf_guest_info_callbacks and related defines from the front
of the header closer to where it's used within the header.
- And more #endif markers for larger CPP blocks and standardize
#if/#else/#endif blocks to the following nomenclature:
#ifdef CONFIG_FOO
...
#else /* !CONFIG_FOO: */
...
#endif /* !CONFIG_FOO */
- Standardize on consistently using the 'extern' storage class where
appropriate, we had cases where method prototypes sometimes omitted
the storage class:
extern void perf_pmu_migrate_context(struct pmu *pmu,
int src_cpu, int dst_cpu);
int perf_event_read_local(struct perf_event *event, u64 *value,
u64 *enabled, u64 *running);
extern u64 perf_event_read_value(struct perf_event *event,
u64 *enabled, u64 *running);
Which is obviously a bit confusing and adds unnecessary noise.
- s/__u64/u64 and similar cleanups: there's no point in using __u64
in non-UAPI headers, and doing so only adds unnecessary visual noise.
- Harmonize all multi-parameter function prototypes along the following
style:
extern struct perf_event *
perf_event_create_kernel_counter(struct perf_event_attr *attr,
int cpu,
struct task_struct *task,
perf_overflow_handler_t callback,
void *context);
- etc.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch introduces the use of the Intel QAT to offload EROFS data
decompression, aiming to improve the decompression performance.
A 285MiB dataset is used with the following command to create EROFS
images with different cluster sizes:
$ mkfs.erofs -zdeflate,level=9 -C{4096,16384,65536,131072,262144}
Fio is used to test the following read patterns:
$ fio -filename=testfile -bs=4k -rw=read -name=job1
$ fio -filename=testfile -bs=4k -rw=randread -name=job1
$ fio -filename=testfile -bs=4k -rw=randread --io_size=14m -name=job1
Here are some performance numbers for reference:
Processors: Intel(R) Xeon(R) 6766E (144 cores)
Memory: 512 GiB
|-----------------------------------------------------------------------------|
| | Cluster size | sequential read | randread | small randread(5%) |
|-----------|--------------|-----------------|-----------|--------------------|
| Intel QAT | 4096 | 538 MiB/s | 112 MiB/s | 20.76 MiB/s |
| Intel QAT | 16384 | 699 MiB/s | 158 MiB/s | 21.02 MiB/s |
| Intel QAT | 65536 | 917 MiB/s | 278 MiB/s | 20.90 MiB/s |
| Intel QAT | 131072 | 1056 MiB/s | 351 MiB/s | 23.36 MiB/s |
| Intel QAT | 262144 | 1145 MiB/s | 431 MiB/s | 26.66 MiB/s |
| deflate | 4096 | 499 MiB/s | 108 MiB/s | 21.50 MiB/s |
| deflate | 16384 | 422 MiB/s | 125 MiB/s | 18.94 MiB/s |
| deflate | 65536 | 452 MiB/s | 159 MiB/s | 13.02 MiB/s |
| deflate | 131072 | 452 MiB/s | 177 MiB/s | 11.44 MiB/s |
| deflate | 262144 | 466 MiB/s | 194 MiB/s | 10.60 MiB/s |
Signed-off-by: Bo Liu <liubo03@inspur.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250522094931.28956-1-liubo03@inspur.com
[ Gao Xiang: refine the commit message. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- even more Xbox controllers added to xpad driver: Turtle Beach Recon
Wired Controller, Turtle Beach Stealth Ultra, and PowerA Wired
Controller
- a fix to Synaptics RMI driver to not crash if controller reports
unsupported version of F34 (firmware flash) function
* tag 'input-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi - fix crash with unsupported versions of F34
Input: xpad - add more controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few final fixes for v6.15, some driver fixes for the Freescale DSPI
driver pulled over from their vendor code and another instance of the
fixes Greg has been sending throughout the kernel for constification
of the bus_type in driver core match() functions"
* tag 'spi-fix-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Reset SR flags before sending a new message
spi: spi-fsl-dspi: Halt the module after a new message transfer
spi: spi-fsl-dspi: restrict register range for regmap access
spi: use container_of_cont() for to_spi_device()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fix from Joerg Roedel:
- core: skip PASID validation for devices without PASID support
* tag 'iommu-fixes-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Skip PASID validation for devices without PASID capability
|
|
nvkm_device_tegra_resource_addr()
The nvkm_device_tegra_resource() function returns a mix of error pointers
and NULL. The callers only expect it to return NULL on error. Change it
to only return NULL.
Fixes: 76b8f81a5b92 ("drm/nouveau: improve handling of 64-bit BARs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/dri-devel/334404bdf60765cb5a8e855a74c688bc537531ee.camel@nvidia.com/T/#t
|
|
Large folios aren't supported without TRANSPARENT_HUGEPAGE
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't unlock a should_be_locked path unless we're in a transaction
restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Different versions differ on the size of the blacklist range; it is
theoretically possible that we could end up with blacklisted journal
sequence numbers newer than the newest seq we find in the journal, and
pick a new start seq that's blacklisted.
Explicitly check for this in bch2_fs_journal_start().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We don't want to change the bucket gen, on gen mismatch: it's possible
to have multiple btree nodes with different gens in the same bucket that
we want to keep, if we have to recover from btree node scan.
It's also not necessary to set g->gen_valid; add a comment to that
effect.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was lost in the giant recovery pass rework - but it's used heavily
by bcachefs subcommand utilities.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When we go to allocate and find taht a bucket in the freespace btree is
actually allocated, we're supposed to return nonzero to tell the
allocator to skip it.
This fixes an emergency read only due to a bucket/ptr gen mismatch - we
also don't return the correct bucket gen when this happens.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fixes: 010c89468134 ("bcachefs: Check for casefolded dirents in non casefolded dirs")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull, on target to be quiet, just one amdgpu, one
edid and a few minor xe fixes.
edid:
- fix HDR metadata reset
amdgpu:
- Hibernate fix
xe:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs"
* tag 'drm-fixes-2025-05-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/ptl: Update the PTL pci id table
drm/xe: Use xe_mmio_read32() to read mtcfg register
drm/xe/mocs: Check if all domains awake
Revert "drm/amd: Keep display off while going into S4"
drm/edid: fixed the bug that hdr metadata was not reset
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix a SLPC debugfs NULL pointer dereference (Aradhya)
- Fix an arbitrary value sysfs read return (Aradhya)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aDAxCgfm7HJbrchD@fedora
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Fix for Thunderbolt sink disconnect on MTL/ARL/LNL
- Fix for DDI port clock select mask on PTL+
- Add error checks for alloc_ordered_workqueue() and alloc_workqueue() in display
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aC7LQUtxXKgOVTVt@jlahtine-mobl
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/uixp5cq7emz32lmwwvq4vbujppugfozhyj3cm2aqzx4lcg7ivn@m2khvf4kvz5p
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.15-2025-05-22:
amdgpu:
- Hibernate fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250522183941.9606-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
edid:
- fix HDR metadata reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522113902.GA7000@localhost.localdomain
|
|
On error, copy_from_user returns number of bytes not copied to
destination, but current implementation of copy_user_data_sleepable does
not handle that correctly and returns it as error value, which may
confuse user, expecting meaningful negative error value.
Fixes: a498ee7576de ("bpf: Implement dynptr copy kfuncs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250523181705.261585-1-mykyta.yatsenko5@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Additional v6.16 updates
A couple more updates on top of the last set I sent you, a new driver
for the ES8375 and a fix for the Cirrus KUnit tests from Jaroslav.
|
|
Per the spec, the default max memory region must be 1 covering
all system memory.
When platform does not provide ACPI MRRM table or
when CONFIG_ACPI is opted out, the acpi_mrrm_max_mem_region() function
defaults to returning 1 region complying to RDT spec.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250523172001.1761634-1-anil.s.keshavamurthy@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Lorenz Bauer says:
====================
Allow mmap of /sys/kernel/btf/vmlinux
I'd like to cut down the memory usage of parsing vmlinux BTF in ebpf-go.
With some upcoming changes the library is sitting at 5MiB for a parse.
Most of that memory is simply copying the BTF blob into user space.
By allowing vmlinux BTF to be mmapped read-only into user space I can
cut memory usage by about 75%.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
---
Changes in v5:
- Fix error return of btf_parse_raw_mmap (Andrii)
- Link to v4: https://lore.kernel.org/r/20250510-vmlinux-mmap-v4-0-69e424b2a672@isovalent.com
Changes in v4:
- Go back to remap_pfn_range for aarch64 compat
- Dropped btf_new_no_copy (Andrii)
- Fixed nits in selftests (Andrii)
- Clearer error handling in the mmap handler (Andrii)
- Fixed build on s390
- Link to v3: https://lore.kernel.org/r/20250505-vmlinux-mmap-v3-0-5d53afa060e8@isovalent.com
Changes in v3:
- Remove slightly confusing calculation of trailing (Alexei)
- Use vm_insert_page (Alexei)
- Simplified libbpf code
- Link to v2: https://lore.kernel.org/r/20250502-vmlinux-mmap-v2-0-95c271434519@isovalent.com
Changes in v2:
- Use btf__new in selftest
- Avoid vm_iomap_memory in btf_vmlinux_mmap
- Add VM_DONTDUMP
- Add support to libbpf
- Link to v1: https://lore.kernel.org/r/20250501-vmlinux-mmap-v1-0-aa2724572598@isovalent.com
---
====================
Link: https://patch.msgid.link/20250520-vmlinux-mmap-v5-0-e8c941acc414@isovalent.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Teach libbpf to use mmap when parsing vmlinux BTF from /sys. We don't
apply this to fall-back paths on the regular file system because there
is no way to ensure that modifications underlying the MAP_PRIVATE
mapping are not visible to the process.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250520-vmlinux-mmap-v5-3-e8c941acc414@isovalent.com
|
|
Add a basic test for the ability to mmap /sys/kernel/btf/vmlinux.
Ensure that the data is valid BTF and that it is padded with zero.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20250520-vmlinux-mmap-v5-2-e8c941acc414@isovalent.com
|
|
User space needs access to kernel BTF for many modern features of BPF.
Right now each process needs to read the BTF blob either in pieces or
as a whole. Allow mmaping the sysfs file so that processes can directly
access the memory allocated for it in the kernel.
remap_pfn_range is used instead of vm_insert_page due to aarch64
compatibility issues.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://lore.kernel.org/bpf/20250520-vmlinux-mmap-v5-1-e8c941acc414@isovalent.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"This fixes a coding mistake in the x86_pkg_temp_thermal Intel thermal
driver that was introduced by an incorrect conflict resolution during
a merge (Zhang Rui)"
* tag 'thermal-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: x86_pkg_temp_thermal: Fix bogus trip temperature
|
|
-Fix the comment describing the 'start' function, which was a cut/paste
mistake for a different function.
-The comment for DIRECT_REQ and DIRECT_RESP only mentioned AArch32
and listed 32-bit function IDs. Update to include 64-bit.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Instead of pr_xxx() macro, use dev_xxx() to print log.
This patch changes some error log level to warn log level when
the tpm_crb_ffa secure partition doesn't support properly but
system can run without it.
(i.e) unsupport of direct message ABI or unsupported ABI version
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
For secure partition with multi service, tpm_ffa_crb can access tpm
service with direct message request v2 interface according to chapter 3.3,
TPM Service Command Response Buffer Interface Over FF-A specificationi v1.0 BET.
This patch reflects this spec to access tpm service over
FF-A direct message request v2 ABI.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The kmalloc failure message is just noise. Remove it and replace -EFAULT
with -ENOMEM as standard for out of memory allocation error returns.
Link: https://lore.kernel.org/linux-integrity/20250430083435.860146-1-colin.i.king@gmail.com/
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Merge series from Zhang Yi <zhangyi@everest-semi.com>:
The driver is for codec ES8375 of everest-semi.
|
|
Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The two patches in the series are extending the usage of FIELD_PREP()
macro and predefined bitmasks usage in the driver.
|
|
When submitting of the descriptors fails, it is quite likely that
the register read buffer contains no valid data. Even if the data
is valid the function returns with an error code anyway.
Change the code to return early if qcom_submit_descs() fails to
avoid superfluously copying possibly invalid data.
Also change the return statement at the end of the function to use
zero value to indicate success obviusly.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250515-qpic-snand-early-error-v1-1-681c87611213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
|