summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-03crypto: aesni - Fix failure when pcbc module is absentHerbert Xu
When aesni is built as a module together with pcbc, the pcbc module must be present for aesni to load. However, the pcbc module may not be present for reasons such as its absence on initramfs. This patch allows the aesni to function even if the pcbc module is enabled but not present. Reported-by: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03crypto: ccp - Fix double add when creating new DMA commandGary R Hook
Eliminate a double-add by creating a new list to manage command descriptors when created; move the descriptor to the pending list when the command is submitted. Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03crypto: ccp - Fix DMA operations when IOMMU is enabledGary R Hook
An I/O page fault occurs when the IOMMU is enabled on a system that supports the v5 CCP. DMA operations use a Request ID value that does not match what is expected by the IOMMU, resulting in the I/O page fault. Setting the Request ID value to 0 corrects this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03crypto: chcr - Check device is allocated before useHarsh Jain
Ensure dev is allocated for crypto uld context before using the device for crypto operations. Cc: <stable@vger.kernel.org> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03crypto: chcr - Fix panic on dma_unmap_sgHarsh Jain
Save DMA mapped sg list addresses to request context buffer. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-02net: phy: Fix lack of reference count on PHY driverMao Wenan
There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by: Mao Wenan <maowenan@huawei.com> [florian: rebase, rework commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge branch 'mlx4-queue-reinit'David S. Miller
Martin KaFai Lau says: ==================== mlx4: Misc bug fixes after reinitializing queues This patchset fixes misc bugs after reinitializing queues (e.g. by ethtool -L). v2: * Add another fix to mem leak in tx_ring[t] and tx_cq[t] * In mlx4_en_try_alloc_resources(), move all xdp_prog logic after calling mlx4_en_alloc_resources() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02mlx4: xdp_prog becomes inactive after ethtool '-L' or '-G'Martin KaFai Lau
After calling mlx4_en_try_alloc_resources (e.g. by changing the number of rx-queues with ethtool -L), the existing xdp_prog becomes inactive. The bug is that the xdp_prog ptr has not been carried over from the old rx-queues to the new rx-queues Fixes: 47a38e155037 ("net/mlx4_en: add support for fast rx drop bpf program") Cc: Brenden Blanco <bblanco@plumgrid.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02mlx4: Fix memory leak after mlx4_en_update_priv()Martin KaFai Lau
In mlx4_en_update_priv(), dst->tx_ring[t] and dst->tx_cq[t] are over-written by src->tx_ring[t] and src->tx_cq[t] without first calling kfree. One of the reproducible code paths is by doing 'ethtool -L'. The fix is to do the kfree in mlx4_en_free_resources(). Here is the kmemleak report: unreferenced object 0xffff880841211800 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0a8>] mlx4_en_try_alloc_resources+0x118/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff880841213000 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0cb>] mlx4_en_try_alloc_resources+0x13b/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff (gdb) list *mlx4_en_try_alloc_resources+0x118 0xffffffff8170e0a8 is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2145). 2140 if (!dst->tx_ring_num[t]) 2141 continue; 2142 2143 dst->tx_ring[t] = kzalloc(sizeof(struct mlx4_en_tx_ring *) * 2144 MAX_TX_RINGS, GFP_KERNEL); 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); (gdb) list *mlx4_en_try_alloc_resources+0x13b 0xffffffff8170e0cb is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2150). 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); 2150 if (!dst->tx_cq[t]) { 2151 kfree(dst->tx_ring[t]); 2152 goto err_free_tx; 2153 } 2154 } Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes two amd fixes. * 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl drm/amdgpu/si: fix crash on headless asics
2017-02-03Merge tag 'topic/vma-fix-for-4.10-2017-02-02' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-fixes here's Maarten's backport of the vma fixes for v4.10. * tag 'topic/vma-fix-for-4.10-2017-02-02' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Track pinned vma in intel_plane_state drm/atomic: Unconditionally call prepare_fb.
2017-02-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - two microcode loader fixes - two FPU xstate handling fixes - an MCE timer handling related crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make timer handling more robust x86/microcode: Do not access the initrd after it has been freed x86/fpu/xstate: Fix xcomp_bv in XSAVES header x86/fpu: Set the xcomp_bv when we fake up a XSAVES area x86/microcode/intel: Drop stashed AP patch pointer optimization
2017-02-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Five kernel fixes: - an mmap tracing ABI fix for certain mappings - a use-after-free fix, found via KASAN - three CPU hotplug related x86 PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Make package handling more robust perf/x86/intel/uncore: Clean up hotplug conversion fallout perf/x86/intel/rapl: Make package handling more robust perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory perf/core: Fix use-after-free bug
2017-02-02Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two EFI boot fixes, one for arm64 and one for x86 systems with certain firmware versions" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/fdt: Avoid FDT manipulation after ExitBootServices() x86/efi: Always map the first physical page into the EFI pagetables
2017-02-02Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "A fix for a bad opcode in objtool's instruction decoder" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix IRET's opcode
2017-02-02Merge tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Three more miscellaneous nfsd bugfixes" * tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux: svcrpc: fix oops in absence of krb5 module nfsd: special case truncates some more NFSD: Fix a null reference case in find_or_create_lock_stateid()
2017-02-02Merge tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull Xtensa fix from Max Filippov: "A for an Xtensa build error introduced in reset code refactoring series in v4.9: - fix noMMU build on cores with MMU" * tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix noMMU build on cores with MMU
2017-02-02Merge tag 'pci-v4.10-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Configure ASPM on the link from a PCI-to-PCIe bridge (avoids a NULL pointer dereference on topologies including these bridges)" * tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
2017-02-03Merge branch 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-next It includes code cleanups from Bhumika and Liviu, a significant shader performance fix and additions to the cmdstream validator from Wladimir and the addition of a cmdbuf suballocator by myself. The suballocator improves performance on all chips by reducing the CPU overhead of the kernel driver and side steps the GC3000 FE MMU flush erratum, now making the workarounds in IOVA allocation we had before unnecessary, which results in a nice cleanup of the code in that area. * 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux: drm/etnaviv: Remove duplicate header file include Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA" drm/etnaviv: add cmdbuf suballocator drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction drm/etnaviv: wire up iova handling in new cmdbuf abstraction drm/etnaviv: move cmdbuf de-/allocation into own file drm/etnaviv: always flush MMU TLBs on map/unmap drm/etnaviv: constify etnaviv_iommu_ops structures drm/etnaviv: set up initial PULSE_EATER register drm/etnaviv: add new GC3000 sensitive states
2017-02-02drm: Fix build when FBDEV_EMULATION is disabledGabriel Krisman Bertazi
Commit be7f735cd5ea ("drm: Rely on mode_config data for fb_helper initialization") broke the build when CONFIG_DRM_FBDEV_EMULATION is disabled because it didn't update the prototype for drm_fb_helper_init in that case. Fixes: be7f735cd5ea ("drm: Rely on mode_config data for fb_helper initialization") Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202193900.22075-1-krisman@collabora.co.uk
2017-02-02drm/amdgpu: stop reserving a shared fence for VA updatesChristian König
We don't add any fences do the buffer, but just use it's address. Additional to that we don't need a duplicates list here. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-02drm/amdgpu: fix race in GEM VA map IOCTL v2Christian König
Somebody could try to free the bo_va between mapping and updating it. v2: fix typos in comment Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-02drm: Rely on mode_config data for fb_helper initializationGabriel Krisman Bertazi
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-02-02ARM: orion5x: fix Makefile for linkstation-lschl.dtbArnd Bergmann
The rename of orion5x-lschl.dts needs to be reflected in the Makefile: make[3]: *** No rule to make target 'arch/arm/boot/dts/orion5x-lschl.dtb', needed by '__build'. Fixes: 6cfd3cd8d836 ("ARM: dts: orion5x-lschl: More consistent naming on linkstation series") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-02PCI/MSI: Don't apply affinity if there aren't enough vectors leftChristoph Hellwig
Bart reported a problem wіth an out of bounds access in the low-level IRQ affinity code, which we root caused to the qla2xxx driver assigning all its MSI-X vectors to the pre and post vectors, and not having any left for the actually spread IRQs. Fix this issue by not asking for affinity assignment when there are no vectors to assign left. Fixes: 402723ad5c62 ("PCI/MSI: Provide pci_alloc_irq_vectors_affinity()") Link: https://lkml.kernel.org/r/1485359225.3093.3.camel@sandisk.com Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-02drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctlMichel Dänzer
vram_size is supposed to be the total amount of VRAM that can be used by userspace, which corresponds to the TTM VRAM manager size (which is normally the full amount of VRAM, but can be just the visible VRAM when DMA can't be used for BO migration for some reason). The above was incorrectly used for vram_visible before, resulting in generally too large values being reported. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-02drm/amdgpu/si: fix crash on headless asicsAlex Deucher
Missing check for crtcs present. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193341 https://bugs.freedesktop.org/show_bug.cgi?id=99387 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-02tracing/kprobes: Fix __init annotationArnd Bergmann
clang complains about "__init" being attached to a struct name: kernel/trace/trace_kprobe.c:1375:15: error: '__section__' attribute only applies to functions and global variables The intention must have been to mark the function as __init instead of the type, so move the attribute there. Link: http://lkml.kernel.org/r/20170201165826.2625888-1-arnd@arndb.de Fixes: f18f97ac43d7 ("tracing/kprobes: Add a helper method to return number of probe hits") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-02-02drm: Provide a driver hook for drm_dev_release()Chris Wilson
Some state is coupled into the device lifetime outside of the load/unload timeframe and requires teardown during final unreference from drm_dev_release(). For example, dmabufs hold both a device and module reference and may live longer than expected (i.e. the current pattern of the driver tearing down its state and then releasing a reference to the drm device) and yet touch driver private state when destroyed. v2: Export drm_dev_fini() and move the responsibility for finalizing the drm_device and freeing it to the release callback. (If no callback is provided, the core will call drm_dev_fini() and kfree(dev) as before.) v3: Remember to add drm_dev_fini() to drm_drv.h v4: Tidy language for kerneldoc v5: Cross reference from drm_dev_init() to note that driver->release() allows for arbitrary embedding. v6: Refer to driver data rather than driver state, as state is now becoming associated with the struct drm_atomic_state and friends. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [danvet: Use the proper reference for struct members, which is &drm_driver.release.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202093632.31017-1-chris@chris-wilson.co.uk
2017-02-02perf callchain: Reference count mapsKrister Johansen
If dso__load_kcore frees all of the existing maps, but one has already been attached to a callchain cursor node, then we can get a SIGSEGV in any function that happens to try to use this invalid cursor. Use the existing map refcount mechanism to forestall cleanup of a map until the cursor iterates past the node. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@kernel.org Fixes: 84c2cafa2889 ("perf tools: Reference count struct map") Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-02perf diff: Fix -o/--order option behavior (again)Namhyung Kim
Commit 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field interface") changed list_add() to perf_hpp__register_sort_field(). This resulted in a behavior change since the field was added to the tail instead of the head. So the -o option is mostly ignored due to its order in the list. This patch fixes it by adding perf_hpp__prepend_sort_field(). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 21e6d8428664 ("perf diff: Use perf_hpp__register_sort_field interface") Link: http://lkml.kernel.org/r/20170118051457.30946-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-02perf diff: Fix segfault on 'perf diff -o N' optionNamhyung Kim
The -o/--order option is to select column number to sort a diff result. It does the job by adding a hpp field at the beginning of the sort list. But it should not be added to the output field list as it has no callbacks required by a output field. During the setup_sorting(), the perf_hpp__setup_output_field() appends the given sort keys to the output field if it's not there already. Originally it was checked by fmt->list being non-empty. But commit 3f931f2c4274 ("perf hists: Make hpp setup function generic") changed it to check the ->equal callback. Anyways, we don't need to add the pseudo hpp field to the output field list since it won't be used for output. So just skip fields if they have no ->color or ->entry callbacks. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 3f931f2c4274 ("perf hists: Make hpp setup function generic") Link: http://lkml.kernel.org/r/20170118051457.30946-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-02drm: meson: rename driver name to meson-drmNeil Armstrong
The platform driver name is currently "meson" which can lead to some confusion, this patch renames it to "meson-drm" and removes the owner attribute since is always added by __platform_driver_register called by the module_platform_driver() macro. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-3-git-send-email-narmstrong@baylibre.com
2017-02-02drm: meson: rename module name to meson-drmNeil Armstrong
The module is currently named "meson.ko" which can lead to some confusion, this patches renames it "meson-drm.ko" Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486028864-19622-2-git-send-email-narmstrong@baylibre.com
2017-02-02crypto: qat - zero esram only for DH85x devicesGiovanni Cabiddu
Zero embedded ram in DH85x devices. This is not needed for newer generations as it is done by HW. Cc: <stable@vger.kernel.org> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-02crypto: qat - fix bar discovery for c62xGiovanni Cabiddu
Some accelerators of the c62x series have only two bars. This patch skips BAR0 if the accelerator does not have it. Cc: <stable@vger.kernel.org> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-02drm/bridge/sii8620: enable interlace modesAndrzej Hajda
Bug in DECON(CRTC) driver prevented interlace modes from proper work. Since DECON is fixed interlace modes can be enabled in MHL. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-26-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: enable MHL3 mode if possibleAndrzej Hajda
Since all sub-protocols of MHL3 are already supported MHL3 mode can be enabled. With this patch it is possible to use packed pixel modes and clocks up to 300MHz - 1920x1080@60Hz and 4K modes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-25-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add HSIC initialization codeAndrzej Hajda
In case of MHL3 HSIC should be initialized. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-24-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: improve gen2 write burst IRQ routineAndrzej Hajda
The patch adds code to report back feature complete IRQ, and code to read and drop burst writes from peer. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-23-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: send EMSC features on requestAndrzej Hajda
Device should report to the peer which features are really supported. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-22-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: rewrite hdmi start sequenceAndrzej Hajda
MHL3 protocol requires registry adjustments depending on chosen video mode. Necessary information is gathered in mode_fixup callback. In case of HDMI video modes driver should also send special AVI and MHL3 infoframes. The patch introduces generic helpers for handling MHL3 infoframes, in case of appearance of other users of MHL3 infoframes these function can be moved to common library. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-21-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/mhl: add MHL3 infoframe related definitionsAndrzej Hajda
MHL3 protocol uses vendor specific infoframes to transmit additional information to the sink. This patch adds definitions of structures and constants used to create such frames. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-20-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix disconnect sequenceAndrzej Hajda
The patch allows to avoid rare cases when discovery fails. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-19-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: split EDID read and write codeAndrzej Hajda
MHL3 requires that after reading EDID from the sink source should ask peer for features. To make both protocols happy the patch splits the code accordingly. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-18-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: add delay during cbus resetAndrzej Hajda
Without delay CBUS sometimes was not reset properly. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-17-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: do not stop MHL output when TMDS input is stoppedAndrzej Hajda
Stopping output causes full re-detection of the sink and slows down the process. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-16-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: set gen2 write burst before sending MSC commandAndrzej Hajda
Write burst should be enabled for MHL_INT_RC_FEAT_REQ and disabled for other commands. The patch moves functions up and adds delay setting for MHL3 burst mode. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-15-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: abstract out sink detection codeAndrzej Hajda
MHL1 and MHL3 have different initialization paths. To make both protocols happy sink detection is put into continuation after link mode enablement. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-14-git-send-email-a.hajda@samsung.com
2017-02-02drm/bridge/sii8620: fix initialization sequence for MHL2 receiversAndrzej Hajda
MHL2 receiver require disabling transmitter on initialization. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1485935272-17337-13-git-send-email-a.hajda@samsung.com
generated by cgit (git 2.34.1) at 2025-10-01 21:57:25 +0000