summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-18drm/edid: CEA mode 64 1080p100 vsync pulse width incorrectClint Taylor
In the CEA-861 specification VIC 64 specifies a vsync pulse of 5 and a backporch of 36. Adjust vsync pulse width to match specification. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1471282288-30909-1-git-send-email-clinton.a.taylor@intel.com
2016-08-18drm/i915/gen9: Drop invalid WARN() during data rate calculationMatt Roper
It's possible to have a non-zero plane mask and still wind up with a total data rate of zero. There are two cases where this can happen: * planes are active (from the KMS point of view), but are all fully clipped (positioned offscreen) * the only active plane on a CRTC is the cursor (which is handled independently and not counted into the general data rate computations These are both valid display setups (although unusual), so we need to drop the WARN(). Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: kms_universal_planes.cursor-only-pipe-* Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-4-git-send-email-matthew.d.roper@intel.com Cc: stable@vger.kernel.org #v4.7+
2016-08-18drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)Matt Roper
intel_state->active_crtcs is usually only initialized when doing a modeset. During our first atomic commit after boot, we're effectively faking a modeset to sanitize the DDB/wm setup, so ensure that this field gets initialized before use. v2: - Don't clobber active_crtcs if our first commit really is a modeset (Maarten) - Grab connection_mutex when faking a modeset during sanitization (Maarten) Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-2-git-send-email-matthew.d.roper@intel.com Cc: stable@vger.kernel.org #v4.7+
2016-08-17drm/amd/amdgpu: Add more debugfs config dataTom St Denis
Adds family and external_rev_id to config data Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-17drm/amdgpu: Hardcode virtual DCE vblank / scanout position return valuesEmily Deng
For virtual display feature, by hardcoding 0 for the vblank counter and -EINVAL for the scanout position return value, we signal to the core DRM code that there are no hardware counters we can use for these. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-17drm/i915: Add missing kerneldoc for guc_client_alloc:enginesChris Wilson
Brief parameter text to describe @engines. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471437762-22936-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-08-17drm/i915: Remember to set vma->pages for the preallocated stolen objectChris Wilson
In commit 247177ddd517 ("drm/i915: Always set the vma->pages"), as it title implies, we always set vma->pages for bound objects. Even before that, we would set vma->ggtt_view.pages, for globally bound objects. This was forgotten for the fixup inside the preallocated stolen objects, which has to recreate a global GTT binding outside of the usual VMA insertion path Fixes: 247177ddd517 ("drm/i915: Always set the vma->pages") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471430013-3449-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2016-08-17Revert "drm/hisilicon: Don't set drm_device->platformdev"Daniel Vetter
This reverts commit d25bcfb8c2e18b9b36f037f38be4d4792ebf8d57. I somehow missed that it only compiles on arm64 and broke the driver rather badly. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-08-17drm/i915: Mark i915_hpd_poll_init_work as staticChris Wilson
Local function with forgotten static declaration. Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lyude <cpaul@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471432146-5196-2-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-08-17drm/i915: Mark the static key for movntqda as staticChris Wilson
Silence sparse who warns that the global variable is not declared static. Fixes: 0b1de5d58e19 ("drm/i915: Use SSE4.1 movntdqa to ...") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Akash Goel <akash.goel@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471432146-5196-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-08-17drm/i915: Initialize legacy semaphores from engine hw id indexed arrayTvrtko Ursulin
Build the legacy semaphore initialisation array using the engine hardware ids instead of driver internal ones. This makes the static array size dependent only on the number of gen6 semaphore engines. Also makes the per-engine semaphore wait and signal tables hardware id indexed saving some more space. v2: Refactor I915_GEN6_NUM_ENGINES to GEN6_SEMAPHORE_LAST. (Chris Wilson) v3: More polish. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1471363461-9973-1-git-send-email-tvrtko.ursulin@linux.intel.com
2016-08-17drm/i915: Add enum for hardware engine identifiersTvrtko Ursulin
Put the engine hardware id in the common header so they are not only associated with the GuC since they are needed for the legacy semaphores implementation. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-08-17dma-buf: fix kernel-doc warning and typosRandy Dunlap
Fix dma-buf kernel-doc warning and 2 minor typos in fence_array_create(). Fixes this warning: ..//drivers/dma-buf/fence-array.c:124: warning: No description found for parameter 'signal_on_any' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/224865a5-947d-9a28-c60a-18fa86bc9329@infradead.org
2016-08-16drm: Fix kerneldoc in drm_plane_helper.cDaniel Vetter
Ville ocd'ed the parameter name, but forgot to update the docs! Fixes: df86af9133b4 ("drm/plane-helper: Add drm_plane_helper_check_state()") Cc: Sean Paul <seanpaul@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-21-git-send-email-daniel.vetter@ffwll.ch
2016-08-16vgaarbiter: rst-ifiy and polish kerneldocDaniel Vetter
Move the documentation into Documentation/gpu, link it up and pull in the kernel doc. No actual text changes except that I did polish the kerneldoc a bit, especially for vga_client_register(). v2: Remove some rst from vga-switcheroo.rst that I don't understand, but which seems to be the reason why the new vgaarbiter.rst sometimes drops out of the sidebar index. v3: Drop one level of headings and clarify the vgaarb one a bit. v4: Fix some typos (Sean). Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-20-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: document drm_display_infoDaniel Vetter
We seem to have a bit a mess in how to describe the bus formats, with a multitude of competing ways. Might be best to consolidate it all and use MEDIA_BUS_FMT_ also for the hdmi color formats and high color modes. Also move all the display_info related functions into drm_connector.c (there's only one) to group it all together. I did decided against also moving the edid related display info functions, they seem to fit better in drm_edid.c. Instead sprinkle a few cross references around. While at that reduce the kerneldoc for static functions, there's not point in documenting internals with that much detail really. v2: Fix typo and move misplaced hunk (Sean). Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-19-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: Remove display_info->min/max_(h|v)maxDaniel Vetter
No one looks at it, only i915/gma500 lvds even bother to fill it out. I guess a very old plan was to use this for filtering modes, but that's already done within the edid parser. v2: Move misplaced hunk to this patch. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-18-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: Update connector documentationDaniel Vetter
- Shuffle docs from drm-kms.rst into the structure docs where it makes sense. - Put the remaining bits into a new overview section. One thing I've changed is around probing: Old docs says that you _must_ use the probe helpers, which isn't correct. Helpers are always optional. v2: Review from Sean. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-17-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: Don't export dp-aux devnode functionsDaniel Vetter
They're only used internally within the dp helpers. Also nuke the kerneldoc (we only document the driver interface in the drm shared functions). And move the header file from the public include/ directory to the source files into drm_crtc_helper_internal.h, similar to how we already have drm_crtc_internal.h. While at it also move drm_fb_helper_modinit since that belongs in there, too. I noticed this all since I spotted kerneldoc which wasn't pulled into the rst templates. v2: Update Copyright date. Cc: Sean Paul <seanpaul@chromium.org> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-16-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/doc: Include new drm_blend.cDaniel Vetter
There's not much point in kerneldoc if it's not included: - It won't show up in the pretty html pages. - The comments itself won't get parsed, which means 0day won't pick up changes, resulting in stale docs fast. Also, uapi really should be core, not helpers, so move drm_blend.c to that. That also means that the zpos normilize function loses it's helper status (and we might as well call it always). For that, EXPORT_SYMBOL. Just spotted while integrating docs and noticing that one was missing. With sphinx there's really no excuse any more to not build the docs and make sure it's all nice! $ make DOCBOOKS="" htmldocs Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-15-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: Extract drm_connector.[hc]Daniel Vetter
Pulls in quite a lot of connector related structures (cmdline mode, force/status enums, display info), but I think that all makes perfect sense. Also had to move a few more core kms object stuff into drm_modeset.h. And as a first cleanup remove the kerneldoc for the 2 connector IOCTL - DRM core docs are aimed at drivers, no point documenting internal in excruciating detail. v2: And also pull in all the connector property code. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-14-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: Export drm_property_replace_global_blobDaniel Vetter
It's really part of the core blob interface, and the drm_connector.c extraction needs it too. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-13-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: update kerneldoc for changes introduced by commits "16fadc2568e9" and ↵Lothar Waßmann
"9671e228fb78" Describe the new parameter 'bus_flags' to of_get_drm_display_mode() in the kerneldoc comments and add kerneldoc comments to the new function drm_bus_flags_from_videomode(). Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471354477-25877-1-git-send-email-LW@KARO-electronics.de
2016-08-16drm/doc: Update drm_framebuffer docsDaniel Vetter
- Move the intro section into a DOC comment, and update it slightly. - kernel-doc for struct drm_framebuffer! v2: - Copypaste fail (Sean). - Explain the linear @offsets clearer (Ville). Cc: Sean Paul <seanpaul@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-12-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm: Extract drm_framebuffer.[hc]Daniel Vetter
Also start with drm_modeset.h with the core bits, since we need to untangle this mess somehow. That allows us to move the drm_modes.h include to the right spot, except for the temporary connector status enum. That will get fixed as soon as drm_connector.h exists. v2: Rebase. v3: Move drm_crtc_force_disable_all back again, that wasn't meant to be moved (Sean). v4: Rebase. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-08-16drm/amd/amdgpu: Add more config data for debugfsTom St Denis
Adds rev_id as well as cg/pg flags to help debug runtime. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: fix coding style in amdgpu_object.cChristian König
Just a few 80 chars problems. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: add function pointer to the pte_update_paramsChristian König
Remember what function to call while planning the commands instead of figuring it our later on. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: stop splitting PTE commands into smaller onesChristian König
It doesn't make much sense to create bigger commands first which we then need to split into smaller one again. Just make sure the commands we create aren't to big in the first place. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: remove AMDGPU_VM_NO_FLUSH defineChristian König
Not used any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: cleanup the write_pte implementationsChristian König
We don't need the gart mapping handling here any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: remove pages_addr handling from the VM codeChristian König
Not needed any more. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: write PTEs directly into the IB.Christian König
Write the PTEs at the end of the IB instead of directly into the SDMA commands. This can save quite some CPU cycles building the entries. This doesn't change the DW estimation because PTEs where embedded into the IB before as well. It just moves them to the end of the IB. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: add shadow flag V2Chunming Zhou
Indicate if need to sync between bo and shadow, where sync to where. V2: Rename to backup_shadow Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: allocate shadow for pd/pt bo V2Chunming Zhou
The pd/pt shadow bo will be used to backup page table, when gpu reset happens, we can restore the page table by them. V2: Free shadow bo. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: validate shadow as well when validating boChunming Zhou
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amdgpu: add shadow bo support V2Chunming Zhou
shadow bo is the shadow of a bo, which is always in GTT, which can be used to backup the original bo. V2: reference shadow parent, shadow bo will be freed by who allocted him. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amd/amdgpu: UVD v6 register cleanupTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amd/amdgpu: VCE v2 register cleanupTom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amd/amdgpu: add mutex in check_soft for VCE v3Tom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/amd/amdgpu: Cleanup register access in VCE v3Tom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-08-16drm/doc: Include drm_atomic.hDaniel Vetter
Accidentally the wrong file. Oops. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-10-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/kms: Nuke dirty_info propertyDaniel Vetter
It was added way back together with the dirty_fb ioctl, but neither generic xfree86-modesetting nor the vmware driver use it. Everyone is supposed to just unconditionally call the dirtyfb when they do frontbuffer rendering. And since unused uabi is bad uabi (there's reasons we require open source userspace for everything) let's nuke this. For reference see commit 884840aa3ce3214259e69557be5b4ce0d781ffa4 Author: Jakob Bornecrantz <jakob@vmware.com> Date: Thu Dec 3 23:25:47 2009 +0000 drm: Add dirty ioctl and property Cc: Jakob Bornecrantz <jakob@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-9-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/doc: Remove outdated FIXME for the page_flip callbackDaniel Vetter
Since the drm_event cleanup work (as prep for fence support) drivers don't need to bother themselves any more with this, the drm event core takes care of that. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-8-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/hisilicon: Don't set drm_device->platformdevDaniel Vetter
It's deprecated and only should be used by drivers which still use drm_platform_init, not by anyone else. And indeed it's entirely unused and can be nuked. This required a bit more fudging, but I guess kirin_dc_ops really wants to operate on the platform_device, not something else. Also bonus points for implementing abstraction, and then storing the vfunc in a global variable. Cc: Xinliang Liu <xinliang.liu@linaro.org> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Archit Taneja <architt@codeaurora.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-7-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/etnaviv: Don't set drm_device->platformdevDaniel Vetter
It's deprecated and only should be used by drivers which still use drm_platform_init, not by anyone else. And indeed it's entirely unused and can be nuked. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-6-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/doc: Reorg for drm-kms.rstDaniel Vetter
- Again adjust headings a bit, and don't mix up the initialization sections with other stuff. - Remove the doc for output polling, that vfunc is now properly documented in the vfunc reference sections. - Move the grab-bag with all the core stuff (i.e. drm_crtc.[hc]) to the front for a more prominent place. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-5-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/doc: Reorg drm-mm.rstDaniel Vetter
- Readjust headings - we lost one level through the extraction into a separate .rst file. - Merge helper reference sections with the helper documentation - that split was just an artifact of the docbook toolchain sucking at too deep nesting levels. No such problems with sphinx. - Move the cma helpers in with the gem documentation, since they're helpers to implement gem using CMA/dma memory as a backend. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-4-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/kms-helpers: Extract drm_modeset_helper.[hc]Daniel Vetter
While reviewing docs I spotted that we have a few functions that really just don't fit into their containing helper library section. Extract them and shovel them all into a new library for random one-off aux stuff. v2: Remove wrongly added files for real. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-3-git-send-email-daniel.vetter@ffwll.ch
2016-08-16drm/doc: Light drm-kms-helper.rst cleanupDaniel Vetter
- Move the common vtable stuff to the top - Move "Tile Group" to a more appropriate heading level - Throw away the old intro for the crtc helpers (it's entirely stale, e.g. helpers have become modular years ago), and replace it with a general intro about the motivation behind helpers. - Reorder helpers to group them together a bit better, and explain that grouping in the intro. - Make sure the introductory DOC section is always first. v2: - Remove bogus files accidentally added (Sean). - Spelling fixes (Sean). Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-2-git-send-email-daniel.vetter@ffwll.ch
generated by cgit (git 2.34.1) at 2025-09-12 23:03:14 +0000