summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-25scsi: ufs: core: Remove redundant host_lock calls around UTMRLDBRAvri Altman
There is no need to serialize single read/write calls to the host controller registers. Remove the redundant host_lock calls that protect access to the task management doorbell register: UTMRLDBR. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241024075033.562562-2-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Improve ufshcd_mcq_sq_cleanup()Bart Van Assche
From the UFSHCI specification: "CleanUp Command Return Code (RTC): host controller sets this return code to provide more details of the cleanup process. It is valid only when CUS is 1." Hence, do not read RTC if the CUS bitfield is zero. Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com> Fixes: 8d7290348992 ("scsi: ufs: mcq: Add supporting functions for MCQ abort") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-7-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Simplify ufshcd_err_handling_prepare()Bart Van Assche
Use blk_mq_quiesce_tagset() instead of ufshcd_scsi_block_requests() and blk_mq_wait_quiesce_done(). Since this patch removes the last callers of ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests(), remove these functions. Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-6-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Simplify ufshcd_exception_event_handler()Bart Van Assche
The ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests() calls were introduced in ufshcd_exception_event_handler() to prevent that querying the exception event information would time out. Commit 10fe5888a40e ("scsi: ufs: increase the scsi query response timeout") increased the timeout for querying exception information from 30 ms to 1.5 s and thereby eliminated the risk that a timeout would happen. Hence, the calls to block and unblock SCSI requests are superfluous. Remove these calls. Reviewed-by: Peter Wang <peter.wang@mediatek.com> Tested-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Simplify ufshcd_try_to_abort_task()Bart Van Assche
The MCQ code is also valid for legacy mode. Hence, remove the legacy mode code and retain the MCQ code. Since it is not an error if a command completes while ufshcd_try_to_abort_task() is in progress, use dev_info() instead of dev_err() to report this. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-4-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Remove goto statements from ufshcd_try_to_abort_task()Bart Van Assche
The only statement that follows the 'out:' label in ufshcd_try_to_abort_task() is a return-statement. Simplify this function by changing 'goto out' statements into return statements. Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Move the ufshcd_mcq_enable_esi() definitionBart Van Assche
Move the ufshcd_mcq_enable_esi() definition such that it occurs immediately before the ufshcd_mcq_config_esi() definition. Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241022193130.2733293-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Make DMA mask configuration more flexibleBart Van Assche
Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver accordingly. This patch enables supporting other configurations than 32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: Use ufshcd_wait_for_register() in HCE initAvri Altman
The current so called "inner loop" in ufshcd_hba_execute_hce() is open coding ufshcd_wait_for_register(). Replace it by ufshcd_wait_for_register(). This is a code simplification - no functional change. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241016102141.441382-1-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-25scsi: ufs: core: check asymmetric connected lanesSEO HOYOUNG
Performance problems may occur if there is a problem with the asymmetric connected lane such as h/w failure. Currently, only check connected lane for rx/tx is checked if it is not 0. But it should also be checked if it is asymmetrically connected. Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com> Link: https://lore.kernel.org/r/e82b4b65b5f6501a687c624dd06e5c362e160f32.1728544727.git.hy50.seo@samsung.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15Merge patch series "scsi: hisi_sas: Some fixes for hisi_sas"Martin K. Petersen
Yihang Li <liyihang9@huawei.com> says: This series contains some fixes including: - Adjust priority of registering and exiting debugfs for security; - Create trigger_dump at the end of the debugfs initialization; - Add firmware information check; - Enable all PHYs that are not disabled by user during controller reset; - Reset PHY again if phyup timeout; - Check usage count only when the runtime PM status is RPM_SUSPENDING; - Add cond_resched() for no forced preemption model; - Default enable interrupt coalescing; - Update disk locked timeout to 7 seconds; - Add time interval between two H2D FIS following soft reset spec; - Update v3 hw STP_LINK_TIMER setting; - Create all dump files during debugfs initialization; - Add latest_dump for the debugfs dump; Link: https://lore.kernel.org/r/20241008021822.2617339-1-liyihang9@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Add latest_dump for the debugfs dumpYihang Li
Before that, after the user triggers the dump, the latest dump information can be viewed in the directory with the maximum number in the dump directory. After this series patch, the driver creates all debugfs directories and files during initialization. Therefore, users cannot know the directory where the latest dump information is stored. So, add latest_dump file to notify users where the latest dump information is stored. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-14-liyihang9@huawei.com Reviewed-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Create all dump files during debugfs initializationYihang Li
For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-13-liyihang9@huawei.com Reviewed-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Update v3 hw STP_LINK_TIMER settingXingui Yang
At present, it is found that some SATA HDD disks may continue to return the HOLD primitive for more than 500ms when they are busy writing data, which is more likely to trigger an STP link timeout exception. Now Modify STP link timer from 500ms to the maximum value of 1.048575s. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-12-liyihang9@huawei.com Reviewed-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Add time interval between two H2D FIS following soft reset specXingui Yang
Spec says at least 5us between two H2D FIS when do soft reset, but be generous and sleep for about 1ms. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-11-liyihang9@huawei.com Reviewed-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Update disk locked timeout to 7 secondsXingui Yang
The SATA disk will be locked after the disk sends the DMA Setup frame until all data frame transmission is completed. The CFG_ICT_TIMER_STEP_TRSH register is used for sata disk to configure the step size of the timer which records the time when the disk is locked. The unit is 1us and the default step size is 150ms. If the disk is locked for more than 7 timer steps, the io to be sent to the disk will end abnormally. The current timeout is only about 1 second, it is easy to trigger IO abnormal end when the SATA hard disk returns data slowly. Adjust the timeout to 7 seconds based on ERC time of most disks. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-10-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Default enable interrupt coalescingYihang Li
In the current interrupt reporting mode, each CQ entry reports an interrupt. However, when there are a large number of I/O hardware completion interrupts, the following issue may occur: [ 4682.678657][ C129] irq 134: nobody cared (try booting with the "irqpoll" option) [ 4682.708455][ C129] Call trace: [ 4682.711589][ C129] dump_backtrace+0x0/0x1e4 [ 4682.715934][ C129] show_stack+0x20/0x2c [ 4682.719933][ C129] dump_stack+0xd8/0x140 [ 4682.724017][ C129] __report_bad_irq+0x54/0x180 [ 4682.728625][ C129] note_interrupt+0x1ec/0x2f0 [ 4682.733143][ C129] handle_irq_event+0x118/0x1ac [ 4682.737834][ C129] handle_fasteoi_irq+0xc8/0x200 [ 4682.742613][ C129] __handle_domain_irq+0x84/0xf0 [ 4682.747391][ C129] gic_handle_irq+0x88/0x2c0 [ 4682.751822][ C129] el1_irq+0xbc/0x140 [ 4682.755648][ C129] _find_next_bit.constprop.0+0x20/0x94 [ 4682.761036][ C129] cpumask_next+0x24/0x30 [ 4682.765208][ C129] gic_ipi_send_mask+0x48/0x170 [ 4682.769900][ C129] __ipi_send_mask+0x34/0x110 [ 4682.775720][ C129] smp_cross_call+0x3c/0xcc [ 4682.780064][ C129] arch_send_call_function_single_ipi+0x38/0x44 [ 4682.786146][ C129] send_call_function_single_ipi+0xd0/0xe0 [ 4682.791794][ C129] generic_exec_single+0xb4/0x170 [ 4682.796659][ C129] smp_call_function_single_async+0x2c/0x40 [ 4682.802395][ C129] blk_mq_complete_request_remote.part.0+0xec/0x100 [ 4682.808822][ C129] blk_mq_complete_request+0x30/0x70 [ 4682.813950][ C129] scsi_mq_done+0x48/0xac [ 4682.818128][ C129] sas_scsi_task_done+0xb0/0x150 [libsas] [ 4682.823692][ C129] slot_complete_v3_hw+0x230/0x710 [hisi_sas_v3_hw] [ 4682.830120][ C129] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw] [ 4682.836114][ C129] irq_thread_fn+0x34/0xa4 [ 4682.840371][ C129] irq_thread+0xc4/0x130 [ 4682.844455][ C129] kthread+0x108/0x13c [ 4682.848365][ C129] ret_from_fork+0x10/0x18 [ 4682.852621][ C129] handlers: [ 4682.855577][ C129] [<00000000949e52bf>] cq_interrupt_v3_hw [hisi_sas_v3_hw] threaded [<000000005d8e3b68>] cq_thread_v3_hw [hisi_sas_v3_hw] [ 4682.868084][ C129] Disabling IRQ #134 When the IRQ management layer processes each hardware interrupt, if the return value of the interrupt handler is IRQ_WAKE_THREAD, it will wake up the handler thread for this interrupt action and set IRQTF_RUNTHREAD flag, wait for the interrupt handling thread to clear the IRQTF_RUNTHREAD flag after execution. Later in note_interrupt(), use irq_count to count hardware interrupts and irqs_unhandled to count interrupts for which no thread handler is responsible. When irq_count reaches 100000 and irqs_unhandled reaches 99000, irq will be disabled. In the performance test scenario, I/O completion hardware interrupts are continuously and quickly generated. As a result, the interrupt processing thread is cyclically called in irq_thread() and does not exit, this affects the response of the interrupt thread to the hardware interrupt and causes irqs_unhandled to grow to 99000. Finally, the irq is disabled. Therefore, default enable interrupt coalescing to reduce the generation of hardware interrupts, this helps interrupt processing threads to stop calling in irq_thread(). For interrupt coalescing, according to the actual performance test, set the count of CQ entries to 10 and the interrupt coalescing timeout period to 10us based on the actual performance test. Before and after interrupt coalescing is enabled, the 4K read/write performance is improved by about 3%, and the 256K read/write performance is basically the same. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-9-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Add cond_resched() for no forced preemption modelYihang Li
For no forced preemption model kernel, in the scenario where the expander is connected to 12 high performance SAS SSDs, the following call trace may occur: [ 214.409199][ C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211] [ 214.568533][ C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 214.575224][ C240] pc : fput_many+0x8c/0xdc [ 214.579480][ C240] lr : fput+0x1c/0xf0 [ 214.583302][ C240] sp : ffff80002de2b900 [ 214.587298][ C240] x29: ffff80002de2b900 x28: ffff1082aa412000 [ 214.593291][ C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000 [ 214.599284][ C240] x25: ffff1062bbac5c40 x24: 0000000000001000 [ 214.605277][ C240] x23: 000000000000000a x22: 0000000000000001 [ 214.611270][ C240] x21: 0000000000001000 x20: 0000000000000000 [ 214.617262][ C240] x19: ffff3062a41ae580 x18: 0000000000010000 [ 214.623255][ C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0 [ 214.629248][ C240] x15: ffffffffffffffff x14: 0000000003ffffff [ 214.635241][ C240] x13: 000000000000ffff x12: 000000000000029c [ 214.641234][ C240] x11: 0000000000000006 x10: ffff80003a9f7fd0 [ 214.647226][ C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001 [ 214.653219][ C240] x7 : 0000000000000002 x6 : 0000000000000080 [ 214.659212][ C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554 [ 214.665205][ C240] x3 : 0000000000000002 x2 : 0000000000000020 [ 214.671198][ C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8 [ 214.677191][ C240] Call trace: [ 214.680320][ C240] fput_many+0x8c/0xdc [ 214.684230][ C240] fput+0x1c/0xf0 [ 214.687707][ C240] aio_complete_rw+0xd8/0x1fc [ 214.692225][ C240] blkdev_bio_end_io+0x98/0x140 [ 214.696917][ C240] bio_endio+0x160/0x1bc [ 214.701001][ C240] blk_update_request+0x1c8/0x3bc [ 214.705867][ C240] scsi_end_request+0x3c/0x1f0 [ 214.710471][ C240] scsi_io_completion+0x7c/0x1a0 [ 214.715249][ C240] scsi_finish_command+0x104/0x140 [ 214.720200][ C240] scsi_softirq_done+0x90/0x180 [ 214.724892][ C240] blk_mq_complete_request+0x5c/0x70 [ 214.730016][ C240] scsi_mq_done+0x48/0xac [ 214.734194][ C240] sas_scsi_task_done+0xbc/0x16c [libsas] [ 214.739758][ C240] slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw] [ 214.746185][ C240] cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw] [ 214.752179][ C240] irq_thread_fn+0x34/0xa4 [ 214.756435][ C240] irq_thread+0xc4/0x130 [ 214.760520][ C240] kthread+0x108/0x13c [ 214.764430][ C240] ret_from_fork+0x10/0x18 This is because in the hisi_sas driver, both the hardware interrupt handler and the interrupt thread are executed on the same CPU. In the performance test scenario, function irq_wait_for_interrupt() will always return 0 if lots of interrupts occurs and the CPU will be continuously consumed. As a result, the CPU cannot run the watchdog thread. When the watchdog time exceeds the specified time, call trace occurs. To fix it, add cond_resched() to execute the watchdog thread. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-8-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Check usage count only when the runtime PM status is ↵Yihang Li
RPM_SUSPENDING Users can suspend the machine with 'echo disk > /sys/power/state', but the suspend will fail because the SAS controller cannot be suspended: [root@localhost ~]# echo freeze > /sys/power/state -bash: echo: write error: Device or resource busy [15104.142955] PM: suspend entry (s2idle) ... [15104.283465] hisi_sas_v3_hw 0000:32:04.0: entering suspend state [15104.283480] hisi_sas_v3_hw 0000:30:04.0: entering suspend state [15104.283500] hisi_sas_v3_hw 0000:32:04.0: PM suspend: host status cannot be suspended [15104.283508] hisi_sas_v3_hw 0000:30:04.0: PM suspend: host status cannot be suspended [15104.283516] hisi_sas_v3_hw 0000:32:04.0: PM: pci_pm_suspend(): suspend_v3_hw+0x0/0x210 [hisi_sas_v3_hw] returns -16 [15104.283527] hisi_sas_v3_hw 0000:32:04.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1c0 returns -16 [15104.283524] hisi_sas_v3_hw 0000:30:04.0: PM: pci_pm_suspend(): suspend_v3_hw+0x0/0x210 [hisi_sas_v3_hw] returns -16 [15104.283533] hisi_sas_v3_hw 0000:32:04.0: PM: failed to suspend async: error -16 [15104.283536] hisi_sas_v3_hw 0000:30:04.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1c0 returns -16 [15104.283542] hisi_sas_v3_hw 0000:30:04.0: PM: failed to suspend async: error -16 The problem is that when the ->runtime_suspend() callback suspend_v3_hw() is executing, the current runtime PM status is RPM_ACTIVE and the usage count of the controller is not 0, so return immediately. To fix it, Check the device usage count only when the runtime PM status is RPM_SUSPENDING. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-7-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Reset PHY again if phyup timeoutYihang Li
In commit 89954f024c3a ("scsi: hisi_sas: Ensure all enabled PHYs up during controller reset"), we enable PHYs in parallel through async operations and wait for PHYs come up. However, for some directly attached SATA disks, the PHY not come up after a timeout period and the hardware is not ready. At this time, we should get the latest PHY hardware state, if the new PHY state is not ready but the old PHY state is ready, call work HISI_PHYE_LINK_RESET to give it another chance to phyup. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-6-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Enable all PHYs that are not disabled by user during ↵Yihang Li
controller reset For the controller reset operation(such as FLR or clear nexus ha in SCSI EH), we will disable all PHYs and then enable PHY based on the hisi_hba->phy_state obtained in hisi_sas_controller_reset_prepare(). If the device is removed before controller reset or the PHY is not attached to any device in directly attached scenario, the corresponding bit of phy_state is not set. After controller reset done, the PHY is disabled. The device cannot be identified even if user reconnect the disk. Therefore, for PHYs that are not disabled by user, hisi_sas_phy_enable() needs to be executed even if the corresponding bit of phy_state is not set. Fixes: 89954f024c3a ("scsi: hisi_sas: Ensure all enabled PHYs up during controller reset") Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-5-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Add firmware information checkYihang Li
For security purposes, after information is obtained through the FW, check information to ensure data correctness. - In v1 and v2 hw, the maximum number of PHYs is 9, while in v3 it is 8. - In v2 and v3 hw, the maximum number of hardware queues is 16, while in v1 it is 32. Also add some debug logs for failure. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-4-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Create trigger_dump at the end of the debugfs initializationYihang Li
In the current debugfs initialization process, the interface trigger_dump is created first, and then the dump directory is created to store the register dump information. The issue is that after the trigger_dump interface is created, users can access the interface to trigger dump and call debugfs_create_files_v3_hw(). In debugfs_create_files_v3_hw(), if .debugfs_dump_dentry is NULL, the file for storing dump information is created under /sys/kernel/debug, and the memory and information cannot be released after the driver is uninstalled. Therefore, the creation of the trigger_dump interface is placed at the end of debugfs initialization. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-3-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: hisi_sas: Adjust priority of registering and exiting debugfs for securityYihang Li
To be safe, we should register debugfs at the last stage of driver initialization and then unregister debugfs at the first stage of driver uninstallation. Signed-off-by: Yihang Li <liyihang9@huawei.com> Link: https://lore.kernel.org/r/20241008021822.2617339-2-liyihang9@huawei.com Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15Merge patch series "scsi: bfa: Remove deadcode"Martin K. Petersen
linux@treblig.org says: Hi, This removes a pile of dead functions in the SCSI bfa driver. These were spotted by hunting for unused symbols in a unmodular kernel build, and then double checking by grepping for the function name. It's been build tested only, I don't have the hardware, but it's strictly full function (and the occasional struct) deletion, so there should be no change in functionality. Thanks to David Hildenbrand for the suggestion of hunting for unused symbols. Dave Link: https://lore.kernel.org/r/20240915125633.25036-1-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: bfa: Remove unused misc codeDr. David Alan Gilbert
Some more unused functions that didn't group elsewhere. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240915125633.25036-6-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: bfa: Remove unused bfa_fcs codeDr. David Alan Gilbert
These functions aren't called anywhere, remove them. Build tested only. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240915125633.25036-5-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: bfa: Remove unused bfa_ioc codeDr. David Alan Gilbert
These functions aren't called anywhere, remove them. Build tested only. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240915125633.25036-4-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: bfa: Remove unused bfa_svc codeDr. David Alan Gilbert
These functions aren't called anywhere, remove them. Build tested only. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240915125633.25036-3-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-15scsi: bfa: Remove unused bfa_core codeDr. David Alan Gilbert
bfa_get_pciids and bfa_cfg_get_min aren't called anywhere; remove them together with the bfa_pciid_s used by bfa_get_pciids. (Build tested, I don't have the card) Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240915125633.25036-2-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: ufs-qcom: Add fixup_dev_quirks vopsManish Pandey
Add fixup_dev_quirk vops in QCOM UFS platforms and provide an initial vendor-specific device quirk table to add UFS device specific quirks which are enabled only for specified UFS devices. - Add DELAY_BEFORE_LPM quirk for Skhynix UFS devices to introduce a delay before VCC is powered off in QCOM platforms. - Add DELAY_AFTER_LPM quirk for Toshiba UFS devices to introduce a delay after the VCC power rail is turned off in QCOM platforms. - Move UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk from ufs_qcom_apply_dev_quirks to ufs_qcom_dev_fixups. Signed-off-by: Manish Pandey <quic_mapa@quicinc.com> Link: https://lore.kernel.org/r/20240903131546.1141-1-quic_mapa@quicinc.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: core: Zero utp_upiu_req at the beginning of each commandAvri Altman
This patch introduces a previously missing step: zeroing the 'utp_upiu_req' structure at the beginning of each upiu transaction. This ensures that the upiu request fields are properly initialized, preventing potential issues caused by residual data from previous commands. While at it, re-use some of the common initializations for query and command upiu. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20240921062306.56019-1-avri.altman@wdc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: core: Do not open code read_poll_timeoutAvri Altman
ufshcd_wait_for_register() practically does just that - replace with read_poll_timeout. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20240919112442.48491-1-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: mptfusion: Remove #ifndef __GENKSYMS__ / #endifBart Van Assche
Except for preventing build errors, there shouldn't be any conditionals in kernel drivers on __GENKSYMS__. Hence remove an #ifndef __GENKSYMS__ / #endif pair from the MPT Fusion driver. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240930201347.1837690-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: aic7xxx: Remove unused aic7770_find_device()Dr. David Alan Gilbert
'aic7770_find_device()' has been unused since 2005's commit dedd83108105 ("[SCSI] aic7xxx: remove Linux 2.4 ifdefs") Remove it and the associated constant. (Whether anyone still has one of these cards in use is another question, I've just build tested this). Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240913170116.250996-1-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: aacraid: Remove unused aac_check_health()Dr. David Alan Gilbert
aac_check_health() has been unused since commit 9473ddb2b037 ("scsi: aacraid: Use correct function to get ctrl health") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240920202304.333108-1-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: bfa: Fix cacography in bfi.h fileLiu Jing
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20240921104537.14843-1-liujing@cmss.chinamobile.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: qedf: Remove dead codeLiao Chen
If container_of() is used correctly, its result is never NULL. Remove the code that depends on container_of() returning a NULL pointer. Signed-off-by: Liao Chen <liaochen4@huawei.com> Link: https://lore.kernel.org/r/20240921062956.2027563-1-liaochen4@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03Merge patch series "Clean up the UFS driver UIC code"Martin K. Petersen
Bart Van Assche <bvanassche@acm.org> says: Hi Martin, This patch series includes four patches that modify the UFS driver UIC code without modifying the behavior of that code. Please consider this patch series for the next merge window. Thanks, Bart. Link: https://lore.kernel.org/r/20240912223019.3510966-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: core: Always initialize the UIC done completionBart Van Assche
Simplify __ufshcd_send_uic_cmd() by always initializing the uic_cmd::done completion. This is fine since the time required to initialize a completion is small compared to the time required to process an UIC command. Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240912223019.3510966-5-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyzeBart Van Assche
In ufshcd_uic_cmd_compl(), there is code that dereferences 'cmd' with and without checking the 'cmd' pointer. This confuses static source code analyzers like Coverity and sparse. Since none of the code in ufshcd_uic_cmd_compl() can do anything useful if 'cmd' is NULL, move the 'cmd' test near the start of this function. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240912223019.3510966-4-bvanassche@acm.org Reviewed-by: Peter Wang <peter.wang@mediatek.com> Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to readBart Van Assche
Introduce a local variable for the expression hba->active_uic_cmd. Remove superfluous parentheses. No functionality has been changed. Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240912223019.3510966-3-bvanassche@acm.org Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: core: Improve the struct ufs_hba documentationBart Van Assche
Make the role of the structure members related to UIC command processing more clear. Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240912223019.3510966-2-bvanassche@acm.org Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-10-03scsi: ufs: ufs: qcom: dt-bindings: Document the QCS8300 UFS ControllerXin Liu
Document the Universal Flash Storage(UFS) Controller on the Qualcomm QCS8300 Platform. Signed-off-by: Xin Liu <quic_liuxin@quicinc.com> Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com> Link: https://lore.kernel.org/r/20240911-qcs8300_ufs_binding-v2-1-68bb66d48730@quicinc.com Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-09-29Linux 6.12-rc1v6.12-rc1Linus Torvalds
2024-09-29x86: kvm: fix build errorLinus Torvalds
The cpu_emergency_register_virt_callback() function is used unconditionally by the x86 kvm code, but it is declared (and defined) conditionally: #if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD) void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback); ... leading to a build error when neither KVM_INTEL nor KVM_AMD support is enabled: arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’: arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration] 12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’: arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration] 12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix the build by defining empty helper functions the same way the old cpu_emergency_disable_virtualization() function was dealt with for the same situation. Maybe we could instead have made the call sites conditional, since the callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak fallback. I'll leave that to the kvm people to argue about, this at least gets the build going for that particular config. Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled") Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Kai Huang <kai.huang@intel.com> Cc: Chao Gao <chao.gao@intel.com> Cc: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-29Merge tag 'mailbox-v6.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox Pull mailbox updates from Jassi Brar: - fix kconfig dependencies (mhu-v3, omap2+) - use devie name instead of genereic imx_mu_chan as interrupt name (imx) - enable sa8255p and qcs8300 ipc controllers (qcom) - Fix timeout during suspend mode (bcm2835) - convert to use use of_property_match_string (mailbox) - enable mt8188 (mediatek) - use devm_clk_get_enabled helpers (spreadtrum) - fix device-id typo (rockchip) * tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: mailbox, remoteproc: omap2+: fix compile testing dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188 mailbox: Use of_property_match_string() instead of open-coding mailbox: bcm2835: Fix timeout during suspend mode mailbox: sprd: Use devm_clk_get_enabled() helpers mailbox: rockchip: fix a typo in module autoloading mailbox: imx: use device name in interrupt name mailbox: ARM_MHU_V3 should depend on ARM64
2024-09-29Merge tag 'i2c-for-6.12-rc1-additional_fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: - fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can always be sent when needed - check for PCLK in the SynQuacer controller as an optional clock, allowing ACPI to directly provide the clock rate - KEBA driver Kconfig dependency fix - fix XIIC driver power suspend sequence * tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled i2c: keba: I2C_KEBA should depend on KEBA_CP500 i2c: synquacer: Deal with optional PCLK correctly i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
2024-09-29Merge tag 'dma-mapping-6.12-2024-09-29' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: - handle chained SGLs in the new tracing code (Christoph Hellwig) * tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix DMA API tracing for chained scatterlists
2024-09-29Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "These are mostly minor updates. There are two drivers (lpfc and mpi3mr) which missed the initial pull and a core change to retry a start/stop unit which affect suspend/resume" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: lpfc: Update lpfc version to 14.4.0.5 scsi: lpfc: Support loopback tests with VMID enabled scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd() scsi: mpi3mr: Update driver version to 8.12.0.0.50 scsi: mpi3mr: Improve wait logic while controller transitions to READY state scsi: mpi3mr: Update MPI Headers to revision 34 scsi: mpi3mr: Use firmware-provided timestamp update interval scsi: mpi3mr: Enhance the Enable Controller retry logic scsi: sd: Fix off-by-one error in sd_read_block_characteristics() scsi: pm8001: Do not overwrite PCI queue mapping scsi: scsi_debug: Remove a useless memset() scsi: pmcraid: Convert comma to semicolon scsi: sd: Retry START STOP UNIT commands scsi: mpi3mr: A performance fix scsi: ufs: qcom: Update MODE_MAX cfg_bw value ...
generated by cgit (git 2.34.1) at 2025-09-09 01:22:20 +0000