| Age | Commit message (Collapse) | Author |
|---|
|
Use a ':' instead of a '-' after function parameters to eliminate
kernel-doc warnings.
kernel/latencytop.c:177: warning: Function parameter or struct member 'tsk' not described in '__account_scheduler_latency'
../kernel/latencytop.c:177: warning: Function parameter or struct member 'usecs' not described in '__account_scheduler_latency'
../kernel/latencytop.c:177: warning: Function parameter or struct member 'inter' not described in '__account_scheduler_latency'
Link: https://lkml.kernel.org/r/20250111063019.910730-1-rdunlap@infradead.org
Fixes: ad0b0fd554df ("sched, latencytop: incorporate review feedback from Andrew Morton")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The bodies of __signed_type_use() and __unsigned_type_use() are much the
same size as their names - so put the bodies in the only line that expands
them.
Similarly __signed_type() is defined separately for 64bit and then used
exactly once just below.
Change the test for __signed_type from CONFIG_64BIT to one based on gcc
defined macros so that the code is valid if it gets used outside of a
kernel build.
Link: https://lkml.kernel.org/r/9386d1ebb8974fbabbed2635160c3975@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Always pass a 'type' through to __clamp_once(), pass '__auto_type' from
clamp() itself.
The expansion of __types_ok3() is reasonable so it isn't worth the added
complexity of avoiding it when a fixed type is used for all three values.
Link: https://lkml.kernel.org/r/8f69f4deac014f558bab186444bac2e8@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
At some point the definitions for clamp() got added in the middle of the
ones for min() and max(). Re-order the definitions so they are more
sensibly grouped.
Link: https://lkml.kernel.org/r/8bb285818e4846469121c8abc3dfb6e2@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use BUILD_BUG_ON_MSG(statically_true(ulo > uhi), ...) for the sanity check
of the bounds in clamp(). Gives better error coverage and one less
expansion of the arguments.
Link: https://lkml.kernel.org/r/34d53778977747f19cce2abb287bb3e6@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the test for signed values being non-negative only relies on
__builtion_constant_p() (not is_constexpr()) it can use the 'ux' variable
instead of the caller supplied expression. This means that the #define
parameters are only expanded twice. Once in the code and once quoted in
the error message.
Link: https://lkml.kernel.org/r/051afc171806425da991908ed8688a98@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
- Change three to several.
- Remove the comment about retaining constant expressions, no longer true.
- Realign to nearer 80 columns and break on major punctiation.
- Add a leading comment to the block before __signed_type() and __is_nonneg()
Otherwise the block explaining the cast is a bit 'floating'.
Reword the rest of that comment to improve readability.
Link: https://lkml.kernel.org/r/85b050c81c1d4076aeb91a6cded45fee@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "minmax.h: Cleanups and minor optimisations".
Some tidyups and minor changes to minmax.h.
This patch (of 7):
Link: https://lkml.kernel.org/r/c50365d214e04f9ba256d417c8bebbc0@AcuMS.aculab.com
Link: https://lkml.kernel.org/r/f04b2e1310244f62826267346fde0553@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@aculab.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A minor issue with nilfs_rename, originating from an old ext2
implementation, is that the mtime is updated even if the rename target is
a directory and it is renamed within the same directory, rather than moved
to a different directory.
In this case, the child directory being renamed does not change in any
way, so changing its mtime is unnecessary according to the specification,
and can unnecessarily confuse backup tools.
In ext2, this issue was fixed by commit 39fe7557b4d6 ("ext2: Do not update
mtime of a moved directory") and a few subsequent fixes, but it remained
in nilfs2.
Fix this issue by not calling nilfs_set_link(), which rewrites the inode
number of the directory entry that refers to the parent directory, when
the move target is a directory and the source and destination are the same
directory.
Here, the directory to be moved only needs to be read if the inode number
of the parent directory is rewritten with nilfs_set_link, so also adjust
the execution conditions of the preparation work to avoid unnecessary
directory reads.
Link: https://lkml.kernel.org/r/20250111143518.7901-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "nilfs2: fix issues with rename operations".
This series fixes BUG_ON check failures reported by syzbot around rename
operations, and a minor behavioral issue where the mtime of a child
directory changes when it is renamed instead of moved.
This patch (of 2):
The directory manipulation routines nilfs_set_link() and
nilfs_delete_entry() rewrite the directory entry in the folio/page
previously read by nilfs_find_entry(), so error handling is omitted on the
assumption that nilfs_prepare_chunk(), which prepares the buffer for
rewriting, will always succeed for these. And if an error is returned, it
triggers the legacy BUG_ON() checks in each routine.
This assumption is wrong, as proven by syzbot: the buffer layer called by
nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may
fail due to metadata corruption or other reasons. This has been there all
along, but improved sanity checks and error handling may have made it more
reproducible in fuzzing tests.
Fix this issue by adding missing error paths in nilfs_set_link(),
nilfs_delete_entry(), and their caller nilfs_rename().
Link: https://lkml.kernel.org/r/20250111143518.7901-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250111143518.7901-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+32c3706ebf5d95046ea1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=32c3706ebf5d95046ea1
Reported-by: syzbot+1097e95f134f37d9395c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1097e95f134f37d9395c
Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix spelling error identified using codespell tool.
Link: https://lkml.kernel.org/r/20250111194709.51133-1-tanyaagarwal25699@gmail.com
Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Cc: Anup Sharma <anupnewsmail@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Also for comments that do not cause kernel-doc warnings (those that list
multiple error codes), revise the return value description style to match
Brian G.'s suggestion of "..., or one of the following negative error
codes on failure:".
Link: https://lkml.kernel.org/r/CAAq45aNh1qV8P6XgDhKeNstT=PvcPUaCXsAF-f9rvmzznsZL5A@mail.gmail.com
Link: https://lkml.kernel.org/r/20250110010530.21872-8-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: "Brian G ." <gissf1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are a number of kernel-doc comments for functions that are missing
return values, which also causes a number of warnings when the kernel-doc
script is run with the "-Wall" option.
Fix this issue by adding proper return value descriptions, and improve
code maintainability.
Link: https://lkml.kernel.org/r/20250110010530.21872-7-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: "Brian G ." <gissf1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to the previous changes to fix return value descriptions, this
fixes the format of the return value descriptions of functions for the
rest.
Link: https://lkml.kernel.org/r/20250110010530.21872-6-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: "Brian G ." <gissf1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to the previous changes to fix return value descriptions, this
fixes the format of the return value descriptions for metadata file
functions other than sufile.
Link: https://lkml.kernel.org/r/20250110010530.21872-5-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: "Brian G ." <gissf1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to the previous changes to fix return value descriptions, this
fixes the format of the return value descriptions of functions for
sufile-related functions, eliminating a dozen warnings emitted by the
kernel-doc script.
Link: https://lkml.kernel.org/r/20250110010530.21872-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: "Brian G ." <gissf1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similar to the previous patch to fix the ioctl return value descriptions,
this fixes the format of the return value descriptions for bmap (and
btree)-related functions, which was causing the kernel-doc script to emit
a number of warnings.
Link: https://lkml.kernel.org/r/20250110010530.21872-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: "Brian G ." <gissf1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "nilfs2: fix kernel-doc comments for function return values",
v2.
This series fixes the inadequacies in the return value descriptions in
nilfs2's kernel-doc comments (mainly incorrect formatting), as well as the
lack of return value descriptions themselves, and fixes most of the
remaining warnings that are output when the kernel-doc script is run with
the "-Wall" option.
This patch (of 7):
In the kernel-doc comments for functions, there are many cases where the
format of the return value description is inaccurate, such as "Return
Value: ...", which causes many warnings to be output when the kernel-doc
script is executed with the "-Wall" option.
This fixes such incorrectly formatted return value descriptions for ioctl
functions.
Link: https://lkml.kernel.org/r/20250110010530.21872-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250110010530.21872-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: "Brian G ." <gissf1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This "Unnecessary parentheses" warning is disabled for drivers/staging
unless the --strict option is used. Really, we don't want it at all even
if the --strict option is used.
Link: https://lkml.kernel.org/r/c7278d21-d96c-4c1e-b3bf-f82b8decc5df@stanley.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Resending this patch as I haven't received feedback on my initial
submission https://lore.kernel.org/all/20241204182953.10854-1-oxana@cloudflare.com/
For the processes which are terminated abnormally the kernel can provide
a coredump if enabled. When the coredump is performed, the process and
all its threads are put into the D state
(TASK_UNINTERRUPTIBLE | TASK_FREEZABLE).
On the other hand, we have kernel thread khungtaskd which monitors the
processes in the D state. If the task stuck in the D state more than
kernel.hung_task_timeout_secs, the hung_task alert appears in the kernel
log.
The higher memory usage of a process, the longer it takes to create
coredump, the longer tasks are in the D state. We have hung_task alerts
for the processes with memory usage above 10Gb. Although, our
kernel.hung_task_timeout_secs is 10 sec when the default is 120 sec.
Adding additional information to the log that the task is blocked by
coredump will help with monitoring. Another approach might be to
completely filter out alerts for such tasks, but in that case we would
lose transparency about what is putting pressure on some system
resources, e.g. we saw an increase in I/O when coredump occurs due its
writing to disk.
Additionally, it would be helpful to have task_struct->flags in the log
from the function sched_show_task(). Currently it prints
task_struct->thread_info->flags, this seems misleading as the line
starts with "task:xxxx".
[akpm@linux-foundation.org: fix printk control string]
Link: https://lkml.kernel.org/r/20250110160328.64947-1-oxana@cloudflare.com
Signed-off-by: Oxana Kharitonova <oxana@cloudflare.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Segall <bsegall@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The deprecated_apis map was created in [1] so checkpatch would flag
deprecated RCU APIs. These deprecated APIs have since been removed from
the kernel. This patch removes them from this map so checkpatch doesn't
waste time looking for them, and so readers of checkpatch looking for
deprecated APIs don't waste time searching for them.
Link: https://lore.kernel.org/all/20181111192904.3199-13-paulmck@linux.ibm.com/ [1]
Link: https://lkml.kernel.org/r/20250108192456.47871-1-me@davidreaver.com
Signed-off-by: David Reaver <me@davidreaver.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
nilfs_lookup_dirty_data_buffers(), which iterates through the buffers
attached to dirty data folios/pages, accesses the attached buffers without
locking the folios/pages.
For data cache, nilfs_clear_folio_dirty() may be called asynchronously
when the file system degenerates to read only, so
nilfs_lookup_dirty_data_buffers() still has the potential to cause use
after free issues when buffers lose the protection of their dirty state
midway due to this asynchronous clearing and are unintentionally freed by
try_to_free_buffers().
Eliminate this race issue by adjusting the lock section in this function.
Link: https://lkml.kernel.org/r/20250107200202.6432-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is.
Link: https://lkml.kernel.org/r/20250107200202.6432-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250107200202.6432-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b2b14916b77acf8626d7
Reported-by: syzbot+d98fd19acd08b36ff422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d98fd19acd08b36ff422
Fixes: 8c26c4e2694a ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The parameter is not used in __ocfs2_mknod_locked(). So remove it.
No functional change.
Link: https://lkml.kernel.org/r/20250106140634.92241-1-glass.su@suse.com
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While running fstests generic/329, the kernel workqueue
quota_release_workfn is dead looping in calling ocfs2_release_dquot().
The ocfs2 state is already readonly but ocfs2_release_dquot wants to
start a transaction but fails and returns.
=====================================================================
[ 2918.123602 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
[ 2918.124034 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:765
ERROR: status = -30
[ 2918.124452 ][ T275 ] (kworker/u135:1,275,11):ocfs2_release_dquot:795
ERROR: status = -30
[ 2918.124883 ][ T275 ] (kworker/u135:1,275,11):ocfs2_start_trans:357
ERROR: status = -30
[ 2918.125276 ][ T275 ] OCFS2: abort (device dm-0): ocfs2_start_trans:
Detected aborted journal
[ 2918.125710 ][ T275 ] On-disk corruption discovered. Please run
fsck.ocfs2 once the filesystem is unmounted.
=====================================================================
ocfs2_release_dquot() is much like dquot_release(), which is called by
ext4 to handle similar situation. So here fix it by marking the dquot as
inactive like what dquot_release() does.
Link: https://lkml.kernel.org/r/20250106140653.92292-1-glass.su@suse.com
Fixes: 9e33d69f553a ("ocfs2: Implementation of local and global quota file handling")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syz reported:
(syz-executor404,5313,0):ocfs2_truncate_log_append:5874 ERROR: bug
expression: tl_count > ocfs2_truncate_recs_per_inode(osb->sb) ||
tl_count == 0
(syz-executor404,5313,0):ocfs2_truncate_log_append:5874 ERROR: Truncate
record count on #77 invalid wanted 39, actual 2087
------------[ cut here ]------------
kernel BUG at fs/ocfs2/alloc.c:5874!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5313 Comm: syz-executor404 Not tainted
6.12.0-rc5-syzkaller-00299-g11066801dd4b #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:ocfs2_truncate_log_append+0x9a8/0x9c0 fs/ocfs2/alloc.c:5868
RSP: 0018:ffffc9000cf16f40 EFLAGS: 00010292
RAX: b4b54f1d10640800 RBX: 0000000000000027 RCX: b4b54f1d10640800
RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000
RBP: ffffc9000cf17070 R08: ffffffff8174a14c R09: 1ffff11003f8519a
R10: dffffc0000000000 R11: ffffed1003f8519b R12: 1ffff110085f5f58
R13: ffffff3800000000 R14: 000000000000004d R15: ffff8880438f0008
FS: 00005555722df380(0000) GS:ffff88801fc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000f000 CR3: 000000004010e000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ocfs2_remove_btree_range+0x1303/0x1860 fs/ocfs2/alloc.c:5789
ocfs2_remove_inode_range+0xff3/0x29f0 fs/ocfs2/file.c:1907
ocfs2_reflink_remap_extent fs/ocfs2/refcounttree.c:4537 [inline]
ocfs2_reflink_remap_blocks+0xcd4/0x1f30 fs/ocfs2/refcounttree.c:4684
ocfs2_remap_file_range+0x5fa/0x8d0 fs/ocfs2/file.c:2736
vfs_copy_file_range+0xc07/0x1510 fs/read_write.c:1615
__do_sys_copy_file_range fs/read_write.c:1705 [inline]
__se_sys_copy_file_range+0x3f2/0x5d0 fs/read_write.c:1668
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fd327167af9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 61 17 00 00 90 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe6b8e22e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000146
RAX: ffffffffffffffda RBX: 00007fd3271b005e RCX: 00007fd327167af9
RDX: 0000000000000006 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00007fd3271de610 R08: 000000000000d8c2 R09: 0000000000000000
R10: 0000000020000640 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffe6b8e24b8 R14: 0000000000000001 R15: 0000000000000001
</TASK>
The fuzz image has a truncate log inode whose tl_count is bigger than
ocfs2_truncate_recs_per_inode() so it triggers the BUG in
ocfs2_truncate_log_append().
As what the check in ocfs2_truncate_log_append() does, just do same check
into ocfs2_get_truncate_log_info when truncate log inode is reading in so
we can bail out earlier.
Link: https://lkml.kernel.org/r/20250108024119.60313-1-glass.su@suse.com
Signed-off-by: Su Yue <glass.su@suse.com>
Reported-by: Liebes Wang <wanghaichi0403@gmail.com>
Link: https://lore.kernel.org/ocfs2-devel/CADCV8souQhdP0RdQF1U7KTWtuHDfpn+3LnTt-EEuMmB-pMRrgQ@mail.gmail.com/T/#u
Reported-by: syzbot+a66542ca5ebb4233b563@syzkaller.appspotmail.com
Tested-by: syzbot+a66542ca5ebb4233b563@syzkaller.appspotmail.com
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Mapping another old, obsolete work email address to my primary one.
Link: https://lkml.kernel.org/r/20250108035840.25194-1-linus.luessing@c0d3.blue
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Correct the value of l_next_free_rec to l_count during the online check,
as done in the check_el() function in ocfs2_tools.
Link: https://lkml.kernel.org/r/20250106023432.1320904-2-sunjunchao2870@gmail.com
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recently syzbot reported a use-after-free issue[1].
The root cause of the problem is that the journal inode recorded in this
file system image is corrupted. The value of
"di->id2.i_list.l_next_free_rec" is 8193, which is greater than the value
of "di->id2.i_list.l_count" (19).
To solve this problem, an additional check should be added within
ocfs2_get_clusters_nocache(). If the check fails, an error will be
returned and the file system will be set to read-only.
[1]: https://lore.kernel.org/all/67577778.050a0220.a30f1.01bc.GAE@google.com/T/
Link: https://lkml.kernel.org/r/20250106023432.1320904-1-sunjunchao2870@gmail.com
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reported-by: syzbot+2313dda4dc4885c93578@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2313dda4dc4885c93578
Tested-by: syzbot+2313dda4dc4885c93578@syzkaller.appspotmail.com
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a detailed explanation in the list_sort() kernel doc comment
specifying that the comparison function must satisfy antisymmetry and
transitivity. These properties are essential for the sorting algorithm to
produce correct results.
Issues have arisen in the past [1][2][3][4] where comparison functions
violated the transitivity property, causing sorting algorithms to fail to
correctly order elements. While these requirements may seem
straightforward, they are commonly misunderstood or overlooked, leading to
bugs. Highlighting these properties in the documentation will help
prevent such mistakes in the future.
Link: https://lore.kernel.org/lkml/20240701205639.117194-1-visitorckw@gmail.com [1]
Link: https://lore.kernel.org/lkml/20241203202228.1274403-1-visitorckw@gmail.com [2]
Link: https://lore.kernel.org/lkml/20241209134226.1939163-1-visitorckw@gmail.com [3]
Link: https://lore.kernel.org/lkml/20241209145728.1975311-1-visitorckw@gmail.com [4]
Link: https://lkml.kernel.org/r/20250106170104.3137845-3-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: <chuang@cs.nycu.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "lib: clarify comparison function requirements", v2.
Add a detailed explanation in the sort_r/list_sort kernel doc comment
specifying that the comparison function must satisfy antisymmetry and
transitivity. These properties are essential for the sorting algorithm to
produce correct results.
Issues have arisen in the past [1][2][3][4] where comparison functions
violated the transitivity property, causing sorting algorithms to fail to
correctly order elements. While these requirements may seem
straightforward, they are commonly misunderstood or overlooked, leading to
bugs. Highlighting these properties in the documentation will help
prevent such mistakes in the future.
Link: https://lore.kernel.org/lkml/20240701205639.117194-1-visitorckw@gmail.com [1]
Link: https://lore.kernel.org/lkml/20241203202228.1274403-1-visitorckw@gmail.com [2]
Link: https://lore.kernel.org/lkml/20241209134226.1939163-1-visitorckw@gmail.com [3]
Link: https://lore.kernel.org/lkml/20241209145728.1975311-1-visitorckw@gmail.com [4]
This patch (of 2):
Add a detailed explanation in the sort_r() kernel doc comment specifying
that the comparison function must satisfy antisymmetry and transitivity.
These properties are essential for the sorting algorithm to produce
correct results.
Issues have arisen in the past [1][2][3][4] where comparison functions
violated the transitivity property, causing sorting algorithms to fail to
correctly order elements. While these requirements may seem
straightforward, they are commonly misunderstood or overlooked, leading to
bugs. Highlighting these properties in the documentation will help
prevent such mistakes in the future.
Link: https://lkml.kernel.org/r/20250106170104.3137845-1-visitorckw@gmail.com
Link: https://lore.kernel.org/lkml/20240701205639.117194-1-visitorckw@gmail.com [1]
Link: https://lore.kernel.org/lkml/20241203202228.1274403-1-visitorckw@gmail.com [2]
Link: https://lore.kernel.org/lkml/20241209134226.1939163-1-visitorckw@gmail.com [3]
Link: https://lore.kernel.org/lkml/20241209145728.1975311-1-visitorckw@gmail.com [4]
Link: https://lkml.kernel.org/r/20250106170104.3137845-2-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: <chuang@cs.nycu.edu.tw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
get_maintainers.pl doesn't expect list entries to have a display name.
Entries with a display name are omitted and print just the description:
(open list:PIN CONTROLLER - FREESCALE)
These cases are pretty much aliases to a few people, not lists which are
archived and can be subscribed to. Change these cases to be reviewers
instead.
Link: https://lkml.kernel.org/r/20241231155415.186244-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
s/kthread_worker_create/kthread_create_worker/ to avoid confusion when
reading comments before kthread_queue_work().
Link: https://lkml.kernel.org/r/20241224095344.GA7587@didi-ThinkCentre-M930t-N000
Signed-off-by: Tio Zhang <tiozhang@didiglobal.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
squashfs_fill_page is only used in this file, so make it static.
Use kmap_local instead of kmap_atomic, and return a bool so that
the caller can use folio_end_read() which saves an atomic operation
over calling folio_mark_uptodate() followed by folio_unlock().
[willy@infradead.org: fix polarity of "uptodate" Thanks to Ryan for testing]
Link: https://lkml.kernel.org/r/20250110163300.3346321-2-willy@infradead.org
Link: https://lkml.kernel.org/r/20241220224634.723899-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove accesses to page->index and page->mapping. Also use folio
APIs where available. This code still assumes order 0 folios.
[dan.carpenter@linaro.org: fix a NULL vs IS_ERR() bug]
Link: https://lkml.kernel.org/r/7b7f44d6-9153-4d7c-b65b-2d78febe6c7a@stanley.mountain
Link: https://lkml.kernel.org/r/20241220224634.723899-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove a few accesses to page->mapping.
Link: https://lkml.kernel.org/r/20241220224634.723899-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove an access to page->mapping.
Link: https://lkml.kernel.org/r/20241220224634.723899-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use modern folio APIs where they exist and convert back to struct
page for the internal functions.
Link: https://lkml.kernel.org/r/20241220224634.723899-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update the compression algorithms supported, and the Squashfs website
location.
Link: https://lkml.kernel.org/r/20241229233752.54481-5-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch updates the following which are out of date.
- Zstd has been added to the compression algorithms supported.
- The filesystem mailing list (for the kernel code) is changed to
linux-fsdevel rather than the now very little used Sourceforge
mailing list.
- The Squashfs website has been changed to the Squashfs-tools github
repository.
- The fact that Squashfs-tools is likely packaged by the linux
distribution is mentioned.
Link: https://lkml.kernel.org/r/20241229233752.54481-4-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If Squashfs has been configured to directly read datablocks into the page
cache (SQUASHFS_FILE_DIRECT), then the read_page cache is unnecessary.
This improvement is due to the following two commits, which added the
ability to read datablocks into the page cache when pages were missing,
enabling the fallback which used an intermediate buffer to be removed.
commit f268eedddf359 ("squashfs: extend "page actor" to handle missing pages")
commit 1bb1a07afad97 ("squashfs: don't use intermediate buffer if pages missing")
This reduces the amount of memory used when mounting a filesystem by
block_size * maximum number of threads.
Link: https://lkml.kernel.org/r/20241229233752.54481-3-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "squashfs: reduce memory usage and update docs".
This patchset reduces the amount of memory that Squashfs uses when
CONFIG_FILE_DIRECT is configured, and updates various out of date
information in the documentation and Kconfig.
This patch (of 4):
Make squashfs_cache_init() return an ERR_PTR(-ENOMEM) on failure rather
than NULL.
This tidies up some calling code, but, it also allows NULL to be returned
as a valid result when a cache hasn't be allocated.
Link: https://lkml.kernel.org/r/20241229233752.54481-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20241229233752.54481-2-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When testing the atomic write fix patches, the f2fs_bug_on was
triggered as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/inode.c:935!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 3 UID: 0 PID: 257 Comm: bash Not tainted 6.13.0-rc1-00033-gc283a70d3497 #5
RIP: 0010:f2fs_evict_inode+0x50f/0x520
Call Trace:
<TASK>
? __die_body+0x65/0xb0
? die+0x9f/0xc0
? do_trap+0xa1/0x170
? f2fs_evict_inode+0x50f/0x520
? f2fs_evict_inode+0x50f/0x520
? handle_invalid_op+0x65/0x80
? f2fs_evict_inode+0x50f/0x520
? exc_invalid_op+0x39/0x50
? asm_exc_invalid_op+0x1a/0x20
? __pfx_f2fs_get_dquots+0x10/0x10
? f2fs_evict_inode+0x50f/0x520
? f2fs_evict_inode+0x2e5/0x520
evict+0x186/0x2f0
prune_icache_sb+0x75/0xb0
super_cache_scan+0x1a8/0x200
do_shrink_slab+0x163/0x320
shrink_slab+0x2fc/0x470
drop_slab+0x82/0xf0
drop_caches_sysctl_handler+0x4e/0xb0
proc_sys_call_handler+0x183/0x280
vfs_write+0x36d/0x450
ksys_write+0x68/0xd0
do_syscall_64+0xc8/0x1a0
? arch_exit_to_user_mode_prepare+0x11/0x60
? irqentry_exit_to_user_mode+0x7e/0xa0
The root cause is: f2fs uses FI_ATOMIC_DIRTIED to indicate dirty
atomic files during commit. If the inode is dirtied during commit,
such as by f2fs_i_pino_write, the vfs inode keeps clean and the
f2fs inode is set to FI_DIRTY_INODE. The FI_DIRTY_INODE flag cann't
be cleared by write_inode later due to the clean vfs inode. Finally,
f2fs_bug_on is triggered due to this inconsistent state when evict.
To reproduce this situation:
- fd = open("/mnt/test.db", O_WRONLY)
- ioctl(fd, F2FS_IOC_START_ATOMIC_WRITE)
- mv /mnt/test.db /mnt/test1.db
- ioctl(fd, F2FS_IOC_COMMIT_ATOMIC_WRITE)
- echo 3 > /proc/sys/vm/drop_caches
To fix this problem, clear FI_DIRTY_INODE after commit, then
f2fs_mark_inode_dirty_sync will ensure a consistent dirty state.
Fixes: fccaa81de87e ("f2fs: prevent atomic file from being dirtied before commit")
Signed-off-by: Yunlei He <heyunlei@xiaomi.com>
Signed-off-by: Jianan Huang <huangjianan@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"A simple fix for mishandling of some clk_get_optional() return codes
in the OMAP driver, the problem was reported against stable kernels on
a few platforms after an earlier incomplete fix was backported"
* tag 'spi-fix-v6.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Correctly handle devm_clk_get_optional() errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- samsung: add gs101-mbox driver
- microchip: add sbi-ipc driver
- zynqmp: fix invalid __percpu annotation
- qcom: add IPQ5424 APCS compatible
- mpfs fix copy and paste bug
- th1520: Fix NULL vs IS_ERR() and a memory corruption bug
- tegra-hsp: clear mailbox before using message
* tag 'mailbox-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
riscv: export __cpuid_to_hartid_map
riscv: sbi: vendorid_list: Add Microchip Technology to the vendor list
mailbox: th1520: Fix memory corruption due to incorrect array size
mailbox: zynqmp: Remove invalid __percpu annotation in zynqmp_ipi_probe()
MAINTAINERS: add entry for Samsung Exynos mailbox driver
mailbox: add Samsung Exynos driver
dt-bindings: mailbox: add google,gs101-mbox
mailbox: qcom: Add support for IPQ5424 APCS IPC
dt-bindings: mailbox: qcom: Add IPQ5424 APCS compatible
mailbox: qcom-ipcc: Reset CLEAR_ON_RECV_RD if set from boot firmware
mailbox: add Microchip IPC support
dt-bindings: mailbox: add binding for Microchip IPC mailbox controller
mailbox: tegra-hsp: Clear mailbox before using message
mailbox: mpfs: fix copy and paste bug in probe
mailbox: th1520: Fix a NULL vs IS_ERR() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"The main change is the addition of PCI bus support for mipi-i3c-hci.
I'm also carrying an hwmon patch as it makes use of the bitops
addition that is then mainly used by i3c drivers.
Core:
- Improve initialization of numbered I2C adapters
Drivers:
- use parity8 helper
- dw: fix possible use-after-free
- mipi-i3c-hci: add support for PCI bus host
- svc: many fixes for IBI and hotjoin"
* tag 'i3c/for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Improve initialization of numbered I2C adapters
i3c: master: Fix missing 'ret' assignment in set_speed()
i3c: cdns: use parity8 helper instead of open coding it
i3c: mipi-i3c-hci: use parity8 helper instead of open coding it
i3c: dw: use parity8 helper instead of open coding it
hwmon: (spd5118) Use generic parity calculation
bitops: add generic parity calculation for u8
i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI bus
i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming
i3c: fix kdoc parameter description for module_i3c_i2c_driver()
i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Increase the headroom in the EFI memory map allocation created by the
EFI stub. This is needed because event callbacks called during
ExitBootServices() may cause fragmentation, and reallocation is not
allowed after that.
- Drop obsolete UGA graphics code and switch to a more ergonomic API to
traverse handle buffers. Simplify some error paths using a __free()
helper while at it.
- Fix some W=1 warnings when CONFIG_EFI=n
- Rely on the dentry cache to keep track of the contents of the
efivarfs filesystem, rather than using a separate linked list.
- Improve and extend efivarfs test cases.
- Synchronize efivarfs with underlying variable store on resume from
hibernation - this is needed because the firmware itself or another
OS running on the same machine may have modified it.
- Fix x86 EFI stub build with GCC 15.
- Fix kexec/x86 false positive warning in EFI memory attributes table
sanity check.
* tag 'efi-next-for-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (23 commits)
x86/efi: skip memattr table on kexec boot
efivarfs: add variable resync after hibernation
efivarfs: abstract initial variable creation routine
efi: libstub: Use '-std=gnu11' to fix build with GCC 15
selftests/efivarfs: add concurrent update tests
selftests/efivarfs: fix tests for failed write removal
efivarfs: fix error on write to new variable leaving remnants
efivarfs: remove unused efivarfs_list
efivarfs: move variable lifetime management into the inodes
selftests/efivarfs: add check for disallowing file truncation
efivarfs: prevent setting of zero size on the inodes in the cache
efi: sysfb_efi: fix W=1 warnings when EFI is not set
efi/libstub: Use __free() helper for pool deallocations
efi/libstub: Use cleanup helpers for freeing copies of the memory map
efi/libstub: Simplify PCI I/O handle buffer traversal
efi/libstub: Refactor and clean up GOP resolution picker code
efi/libstub: Simplify GOP handling code
efi/libstub: Use C99-style for loop to traverse handle buffer
x86/efistub: Drop long obsolete UGA support
efivarfs: make variable_is_present use dcache lookup
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Add Bindings for QCom QCS615 UFS, QCom IPQ5424 DWC3 USB, NXP imx7d
MIPI DSI, QCom SM8750 PDC, QCom MSM8976 SRAM, QCom ipq6018 temp
sensor, QCom QCS8300 Power Domain Controller, QCom QCS615 Power
Domain Controller, QCom QCS615 APSS, QCom QCS615 qfprom, QCom
QCS8300 remoteproc, Mediatek MT6328 PMIC, Allwinner A100 OPP, and
NXP iMX35 GPT
- Convert Altera socfpga-system, raspberrypi,bcm2835-power to DT
schema
- Add Siflower vendor prefix
- Cleanup display, interrupt-controller, and UFS binding examples'
indentation
- Document preferred line wrapping (the same as the rest of the
kernel)
DT Core:
- Add warning when of_property_read_bool() is used on non-boolean
properties
- Restore keeping bootloader DTB when booting with ACPI. Turns out
some x86 platforms relied on that. Shrug.
- Fix of_find_node_opts_by_path() handling of alias+path+options
- Fix resource bounds checking for empty resources
- A bunch of small fixes/cleanups all over from Zijun Hu
- Cleanups in bin_attribute handling"
* tag 'devicetree-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (50 commits)
of: address: Fix empty resource handling in __of_address_resource_bounds()
of/fdt: Restore possibility to use both ACPI and FDT from bootloader
docs: dt-bindings: Document preferred line wrapping
dt-bindings: ufs: Correct indentation and style in DTS example
of: Correct element count for two arrays in API of_parse_phandle_with_args_map()
of: reserved-memory: Warn for missing static reserved memory regions
of: Do not expose of_alias_scan() and correct its comments
dt-bindings: ufs: qcom: Add UFS Host Controller for QCS615
dt-bindings: usb: qcom,dwc3: Add IPQ5424 to USB DWC3 bindings
dt-bindings: arm: coresight: Update the pattern of ete node name
of: Warn when of_property_read_bool() is used on non-boolean properties
device property: Split property reading bool and presence test ops
of/fdt: Check fdt_get_mem_rsv() error in early_init_fdt_scan_reserved_mem()
of: reserved-memory: Move an assignment to effective place in __reserved_mem_alloc_size()
of: reserved-memory: Do not make kmemleak ignore freed address
of: reserved-memory: Fix using wrong number of cells to get property 'alignment'
of: Remove a duplicated code block
of: property: Avoiding using uninitialized variable @imaplen in parse_interrupt_map()
of: Correct child specifier used as input of the 2nd nexus node
dt-bindings: interrupt-controller: ti,omap4-wugen-mpu: Add file extension
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"As usual, a number of new drivers get added to the defconfig to
support additional hardware.
The stm32 defconfig also turns off a few options to optimize for size"
* tag 'soc-defconfig-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
dt-bindings: soc: samsung: exynos-pmu: Add exynos990-pmu compatible
arm64: defconfig: enable Maxim TCPCI driver
ARM: configs: stm32: Remove useless flags in STM32 defconfig
ARM: configs: stm32: Remove CRYPTO in STM32 defconfig
ARM: configs: stm32: Clean STM32 defconfig
ARM: configs: stm32: Remove FLASH_MEM_BASE and FLASH_SIZE in STM32 defconfig
arm64: defconfig: Enable pinctrl-based I2C mux
arm64: defconfig: Enable Rockchip extensions for Synopsys DW HDMI QP
arm64: defconfig: Enable RFKILL GPIO
arm64: defconfig: Enable TI K3 M4 remoteproc driver
arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
arm64: defconfig: Enable basic Qualcomm SM8750 SoC drivers
arm64: defconfig: remove obsolete CONFIG_SM_DISPCC_8650
arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300
arm64: defconfig: Enable sa8775p clock controllers
arm64: defconfig: Enable MediaTek DWMAC
arm64: defconfig: Enable sound for MT8188
arm64: defconfig: Enable MediaTek STAR Ethernet MAC
riscv: defconfig: enable pinctrl and dwmac support for TH1520
arm64: defconfig: Enable Amazon Elastic Network Adaptor
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"These are changes to SoC specific drivers and DT bindings that don't
have a separate subsystem tree, or that get grouped here for
simplicity.
Nothing out of the ordinary for the 6.14 release here:
- Most of the updates are for Qualcomm specific drivers, adding
support for additional SoCs in the exssting drivers, and support
for wrapped encryption key access in the SCM firmware.
- The Arm SCMI firmware code gains support for having multiple
instances of firmware running, and better module auto loading.
- A few minor updates for litex, samsung, ti, tegra, mediatek, imx
and renesas platforms.
- Reset controller updates for amlogic, to add support for the A1 soc
and clean up the existing code.
- Memory controller updates for ti davinci aemif, refactoring the
code and adding a few interfaces to other drivers"
* tag 'soc-drivers-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (58 commits)
drivers/soc/litex: Use devm_register_restart_handler()
reset: amlogic: aux: drop aux registration helper
reset: amlogic: aux: get regmap through parent device
reset: amlogic: add support for A1 SoC in auxiliary reset driver
dt-bindings: reset: add bindings for A1 SoC audio reset controller
soc/tegra: fuse: Update Tegra234 nvmem keepout list
soc/tegra: Fix spelling error in tegra234_lookup_slave_timeout()
soc/tegra: cbb: Drop unnecessary debugfs error handling
firmware: qcom: scm: add calls for wrapped key support
soc: qcom: pd_mapper: Add SM7225 compatible
dt-bindings: firmware: qcom,scm: Document ipq5424 SCM
soc: qcom: llcc: Update configuration data for IPQ5424
dt-bindings: cache: qcom,llcc: Add IPQ5424 compatible
soc: mediatek: mtk-devapc: Fix leaking IO map on driver remove
soc: mediatek: mtk-devapc: Fix leaking IO map on error paths
firmware: qcom: scm: smc: Narrow 'mempool' variable scope
firmware: qcom: scm: smc: Handle missing SCM device
firmware: qcom: scm: Cleanup global '__scm' on probe failures
firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool()
firmware: qcom: scm: Fix missing read barrier in qcom_scm_is_available()
...
|
