summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-18bnx2: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18Merge branch 'gianfar'David S. Miller
Claudiu Manoil says: ==================== gianfar: Device configuration fixes This patchset represents the first part of an effort to solve some old device configuration issues in gianfar, especially run-time reset and re-configuration problems. I'm referring to "on-the-fly" configuration of registers against HW specification, concurrency issues during device reset / re-configuration operations, and implementing HW advisories for these operations. There's also a good deal of code cleanup and refactoring, and some other (minor) fixes as well. v2: Remove sysfs stubs w/o replacing them with module params (patch 2). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18gianfar: Remove clean_rx_ring race from gfar_ethtoolClaudiu Manoil
gfar_clean_rx_ring() was designed to be called from napi (rx softirq) context to do the Rx processing. Calling it from a process context like this is a bug as it will clearly race with the napi Rx processing. There's also no point in initializing num_txbdfree since startup_gfar() already does that, when bringing the device up again (after reset). Changing num_txbdfree "on-the-fly" like this is also subject to race conditions. num_txbdfree is handled by the Tx processing path and the device reset procedure. Also, don't assume that num_rx_queues is always equal to num_tx_queues. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18gianfar: Add missing graceful reset steps and fixesClaudiu Manoil
gfar_halt() and gfar_start() are responsible for stopping and starting the DMA and the Rx/Tx hw rings. They implement the support for the "graceful Rx/Tx stop/start" hw procedure, and also disable/enable eTSEC's hw interrupts in the process. The GRS/GTS procedure requires however to have the RQUEUE/TQUEUE registers cleared first and to wait for a period of time for the current frame to pass through the interface (around ~10ms for a jumbo frame). Only then may the GTS and GRS bits from DMACTRL be set to shut down the DMA, and finally the Tx_EN and Rx_EN bits in MACCFG1 may be cleared to disable the Tx/Rx blocks. The same register programming order applies to start the Rx/Tx: enabling the RQUEUE/TQUEUE *before* clearing the GRS/GTS bits. This is a HW recommendation in order to avoid a possible controller "lock up" during graceful reset. Cleanup the gfar_halt()/start() prototypes, to take priv instead of ndev as their purpose is to operate on HW. Enabling the RQUEUE/TQUEUE in the hw_init() is not needed anymore since that's the job of gfar_start(). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18gianfar: Factor out enabling/disabling of hw interruptsClaudiu Manoil
Throughout the code there are places where the controller's hw interrupt sources need to get disabled/enabled (masked/ un-masked) all at once. The recommendation for disabling the interrupts is to clear the ievent first then the imask register (not the other way around). Use the gfar_ints_enable/disable() helpers to make these operations consistent. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18gianfar: Remove useless HAS_PADDING device flagClaudiu Manoil
The RCTRL updates of the FSL_GIANFAR_DEV_HAS_PADDING device flag get overriden by the FSL_GIANFAR_DEV_HAS_TIMER flag settings, which impose a Rx padding alignment of 8 bytes. As all the eTSEC devices that set HAS_PADDING also set the HAS_TIMER flag, the HAS_PADDING flag is now obsolete. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18gianfar: Remove sysfs stubs for FIFOCFG and stashingClaudiu Manoil
Removing the sysfs stubs for the Tx FIFOCFG and ATTRELI (stashing) config registers, as these registers may only be configured after a MAC reset, with the controller stopped (i.e. during hw init, at probe() time). The current sysfs stubs allow on-the-fly updates of these registers (the locking measures are useless and only add unecessary code). Changing these registers is discouraged. Only the default values will be used instead. Moreover, the stashing (ATTRELI) configuration options were effectively disabled (didn't get to the hw anyway if changed) because the stashing device_flags (HAS_BD_STASHING|HAS_BUF_STASHING) were "accidentally" cleared during probe(). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18gianfar: Cleanup/Fix gfar_probe and the hw init codeClaudiu Manoil
Factor out gfar_hw_init() to contain all the controller hw initialization steps for a better control of register writes, and to significantly simplify the tangled code from gfar_probe(). This results in code size and stack usage reduction (besides code readability). Fix memory leak on device removal, by freeing the rx_/tx_queue structures. Replace custom bit swapping function with a library one (bitrev8). Move allocation of rx_/tx_queue struct arrays before the group structure init, because in order to assign Rx/Tx queues to groups we need to have the queues first. This also allows earlier bail out of gfar_probe(), in case the memory allocation fails. The flow control checks for maccfg1 were removed from gfar_probe(), since flow control is disabled at probe time (priv->rx_/tx_pause_en are 0). Redundant initializations (by 0) also removed. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18drm/radeon/ni: fix typo in dpm sq ramping setupAlex Deucher
inverted logic. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-02-18drm/radeon/si: fix typo in dpm sq ramping setupAlex Deucher
inverted logic. Noticed-by: Sylvain BERTRAND <sylware@legeek.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-02-18drm/radeon: fix CP semaphores on CIKChristian König
The CP semaphore queue on CIK has a bug that triggers if uncompleted waits use the same address while a signal is still pending. Work around this by using different addresses for each sync. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-18drm/radeon: delete a stray tabDan Carpenter
Static checkers complain that probably curly braces were intended here, but actually it makes more sense to remove the extra tab. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-18drm/radeon: fix display tiling setup on SIAlex Deucher
Apply the same logic as CI to SI for setting up the display tiling parameters. The num banks may vary per tiling index just like CI. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=71488 https://bugs.freedesktop.org/show_bug.cgi?id=73946 https://bugs.freedesktop.org/show_bug.cgi?id=74927 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-02-18drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200Alex Deucher
Most laptops seems to have a vblank period of less than 300 and mclk switching works fine. Drop the quirk and set the default threshold to 200. bug: https://bugzilla.kernel.org/show_bug.cgi?id=70701 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-18drm/radeon: fill in DRM_CAPs for cursor sizeAlex Deucher
CIK parts are 128x128, older parts are 64x64. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-18drm: add DRM_CAPs for cursor sizeAlex Deucher
Some hardware may not support standard 64x64 cursors. Add a drm cap to query the cursor size from the kernel. Some examples include radeon CIK parts (128x128 cursors) and armada (32x64 or 64x32). This allows things like device specific ddxes to remove asics specific logic and also allows xf86-video-modesetting to work properly with hw cursors on this hardware. Default to 64 if the driver doesn't specify a size. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-02-18drm/radeon: unify bpc handlingAlex Deucher
We were already storing the bpc (bits per color) information in radeon_crtc, so just use that everywhere rather than calculating it everywhere we use it. This also allows us to change it in one place if we ever want to override it. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-02-18Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for v3.14" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix use after free in jbd2_journal_start_reserved() ext4: don't leave i_crtime.tv_sec uninitialized ext4: fix online resize with a non-standard blocks per group setting ext4: fix online resize with very large inode tables ext4: don't try to modify s_flags if the the file system is read-only ext4: fix error paths in swap_inode_boot_loader() ext4: fix xfstest generic/299 block validity failures
2014-02-18drm/ttm: Fix memory leak in ttm_agp_backend.cMasanari Iida
This patch fix a memory leak found by cppcheck. [drivers/gpu/drm/ttm/ttm_agp_backend.c:129]: (error) Memory leak: agp_be Signed-off-by: Masanari Iida <standby24x7@gmail.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2014-02-18drm/ttm: declare 'struct device' in ttm_page_alloc.hAlexandre Courbot
Declare 'struct device' explicitly in ttm_page_alloc.h as this file does not include any file declaring it. This removes the following warning: warning: 'struct device' declared inside parameter list Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2014-02-18Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Nothing too exciting, mostly fixes for ancient boards, but a pretty important fix for DP on some systems. Thanks, * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix TTM_PL_TT memtype on pre-nv50 drm/nv50/disp: use correct register to determine DP display bpp drm/nouveau/fb: use correct ram oclass for nv1a hardware drm/nv50/gr: add missing nv_error parameter priv drm/nouveau: fix ENG_RUNLIST register address drm/nv4c/bios: disallow retrieving from prom on nv4x igp's drm/nv4c/vga: decode register is in a different place on nv4x igp's drm/nv4c/mc: nv4x igp's have a different msi rearm register drm/nouveau: set irq_enabled manually
2014-02-18Merge tag 'drm-intel-fixes-2014-02-14' of ↵Dave Airlie
ssh://git.freedesktop.org/git/drm-intel into drm-fixes 3 fixes plus 1 prep patch, all four cc: stable. Jani will take over from here and the plan is that he'll do 3.14-fixes for the entire release just to work things out a bit. * tag 'drm-intel-fixes-2014-02-14' of ssh://git.freedesktop.org/git/drm-intel: drm/i915/dp: add native aux defer retry limit drm/i915/dp: increase native aux defer retry timeout drm/i915: Prevent MI_DISPLAY_FLIP straddling two cachelines on IVB drm/i915: Add intel_ring_cachline_align()
2014-02-18Merge branch 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox ↵Dave Airlie
into drm-fixes fix for leak in tda998x * 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: Fix memory leak in tda998x_encoder_init error path.
2014-02-17jbd2: fix use after free in jbd2_journal_start_reserved()Dan Carpenter
If start_this_handle() fails then it leads to a use after free of "handle". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-02-18drm/nouveau: fix TTM_PL_TT memtype on pre-nv50Ilia Mirkin
Commit a55409066 ("drm/nv50-: map TTM_PL_SYSTEM through a BAR for CPU access") made it possible to work with tiled memory. However mem->mm_node is not a nouveau_mem for AGP-using pre-NV50 cards, but a drm_mm_node, as created by the ttm_bo_manager_func. As such, extend the untiled check to explicitly include all pre-nv50 cards. Reported-by: Ronald <ronald645@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74613 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Tested-by: Ronald Uitermark <ronald645@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nv50/disp: use correct register to determine DP display bppIlia Mirkin
Commit 0a0afd282f ("drm/nv50-/disp: move DP link training to core and train from supervisor") added code that uses the wrong register for computing the display bpp, used for bandwidth calculation. Adjust to use the same register as used by exec_clkcmp and nv50_disp_intr_unk20_2_dp. Reported-by: Torsten Wagner <torsten.wagner@gmail.com> Reported-by: Michael Gulick <mgulick@mathworks.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67628 Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nouveau/fb: use correct ram oclass for nv1a hardwareEmil Velikov
commit 8613e7314ac254fdd67ed46192f021d76141e4c9 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Oct 21 08:50:25 2013 +1000 drm/nouveau/fb: remove ram oclass argument from base fb constructor Introduced a unfortunate regression by using nv10 ram oclass for nv1a hardware, causing corruption and eventually system lockup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74866 Reported-by: John F. Godfrey <jfgodfrey@gmail.com> Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nv50/gr: add missing nv_error parameter privIlia Mirkin
Commit ea7dce901 ("drm/nv50/gr: print mpc trap name when it's not an mp trap") added an nv_error call that was missing the priv parameter. This causes GPFs if the error is ever hit. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nouveau: fix ENG_RUNLIST register addressAlexandre Courbot
Address of the ENG_RUNLIST register should be 0x002284 + (engine * 8), not 0x002284 + (engine * 4). Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nv4c/bios: disallow retrieving from prom on nv4x igp'sIlia Mirkin
Suggested-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nv4c/vga: decode register is in a different place on nv4x igp'sIlia Mirkin
Suggested-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nv4c/mc: nv4x igp's have a different msi rearm registerIlia Mirkin
See https://bugs.freedesktop.org/show_bug.cgi?id=74492 Reported-by: Ronald <ronald645@gmail.com> Suggested-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-18drm/nouveau: set irq_enabled manuallyIlia Mirkin
Since commit 0fa9061ae8c ("drm/nouveau/mc: handle irq-related setup ourselves"), drm_device->irq_enabled remained unset. This is needed in order to properly wait for a vblank event in the generic drm code. See https://bugs.freedesktop.org/show_bug.cgi?id=74195 Reported-by: Jan Janecek <janjanjanx@gmail.com> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-02-17ARM: 7957/1: add DSB after icache flush in __flush_icache_all()Vinayak Kale
Add DSB after icache flush to complete the cache maintenance operation. Signed-off-by: Vinayak Kale <vkale@apm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-17Fix uses of dma_max_pfn() when converting to a limiting addressRussell King
We must use a 64-bit for this, otherwise overflowed bits get lost, and that can result in a lower than intended value set. Fixes: 8e0cb8a1f6ac ("ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations") Fixes: 7d35496dd982 ("ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations") Tested-Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-17net: i40evf: Remove duplicate includeSachin Kamat
linux/sctp.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ipv6:fix checkpatch errors with assignment in if conditionWang Yufen
Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ipv6: fix checkpatch errors with space required or prohibitedWang Yufen
Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ipv6: fix checkpatch errors with brace and "foo *bar"Wang Yufen
Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17netlink: fix checkpatch errors space and "foo *bar"Wang Yufen
ERROR: spaces required and "(foo*)" should be "(foo *)" Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17sch_netem: replace magic numbers with enumerate in get_loss_clgYang Yingliang
Replace two magic numbers which intialize clgstate::state. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ipv4: fix counter in_slow_totDuan Jiong
since commit 89aef8921bf("ipv4: Delete routing cache."), the counter in_slow_tot can't work correctly. The counter in_slow_tot increase by one when fib_lookup() return successfully in ip_route_input_slow(), but actually the dst struct maybe not be created and cached, so we can increase in_slow_tot after the dst struct is created. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fixes from Sage Weil: "We have some patches fixing up ACL support issues from Zheng and Guangliang and a mount option to enable/disable this support. (These fixes were somewhat delayed by the Chinese holiday.) There is also a small fix for cached readdir handling when directories are fragmented" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix __dcache_readdir() ceph: add acl, noacl options for cephfs mount ceph: make ceph_forget_all_cached_acls() static inline ceph: add missing init_acl() for mkdir() and atomic_open() ceph: fix ceph_set_acl() ceph: fix ceph_removexattr() ceph: remove xattr when null value is given to setxattr() ceph: properly handle XATTR_CREATE and XATTR_REPLACE
2014-02-17Merge branch 'for-linus' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fixes from Steve French: "Three cifs fixes, the most important fixing the problem with passing bogus pointers with writev (CVE-2014-0069). Two additional cifs fixes are still in review (including the fix for an append problem which Al also discovered)" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix too big maxBuf size for SMB3 mounts cifs: ensure that uncached writes handle unmapped areas correctly [CIFS] Fix cifsacl mounts over smb2 to not call cifs
2014-02-17FS-Cache: Handle removal of unadded object to the fscache_object_list rb treeDavid Howells
When FS-Cache allocates an object, the following sequence of events can occur: -->fscache_alloc_object() -->cachefiles_alloc_object() [via cache->ops->alloc_object] <--[returns new object] -->fscache_attach_object() <--[failed] -->cachefiles_put_object() [via cache->ops->put_object] -->fscache_object_destroy() -->fscache_objlist_remove() -->rb_erase() to remove the object from fscache_object_list. resulting in a crash in the rbtree code. The problem is that the object is only added to fscache_object_list on the success path of fscache_attach_object() where it calls fscache_objlist_add(). So if fscache_attach_object() fails, the object won't have been added to the objlist rbtree. We do, however, unconditionally try to remove the object from the tree. Thanks to NeilBrown for finding this and suggesting this solution. Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: (a customer of) NeilBrown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-17reiserfs: fix utterly brain-damaged indentation.Dave Jones
This has been this way for years, and every time I stumble across it I lose my lunch. After coming across it for the nth time in the Coverity results, I had to overcome the bystander effect and do something about it. This ignores the 79 column limit in favor of making it look like C instead of gibberish. The correct thing to do here would be to lose some of the indentation by breaking this function up into several smaller ones. I might do that at some point if I have the stomach to look at this again. (Also some of those overlong ternary operations would likely be more readable as regular if's) Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-17Merge branch 'ieee802154'David S. Miller
Phoebe Buckheister says: ==================== ieee802154: support rf212 and extended mac features this patch set adds support for the RF212 radio chip to the existing at86rf230 driver and adds support for numerous features of the RF212 chips to the ieee802154 stack. These features include CSMA parameter configuration, transmit power control, CCA parameter configuration, and automatic retransmission of frames. Netlink APIs are provided for all new options introduced in this set. Many features might also work for RF230, but since I have no such chips at my disposal, most new features are implemented only for RF212. Changes since v2: * Indentation Changes since v1: * CodingStyle compliance. Thanks Sergei Shtylyov * Add CSMA parameters to netlink phy list that were forgotten in v1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: enable smart transmitter features of RF212Phoebe Buckheister
This patch does multiple things: * add .set_csma_params and .set_frame_retries for the RF212 radio. This should work fine with RF230, but since I have no RF230 radios to test with, RF230 does not implement these right now * enable TX_ARET for frame retransmission limits greater than -1 Since RF230 has no operations to change CSMA parameters or frame retry limits, RF230 will not be able to enter TX_ARET with this patch. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: add netlink APIs for smartMAC configurationPhoebe Buckheister
Introduce new netlink attributes for SET_PHY_ATTRS: * CSMA minimal backoff exponent * CSMA maximal backoff exponent * CSMA retry limit * frame retransmission limit The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of 802.15.4, respectively. The frame retransmission shall correspond to maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour of the stack shall apply. For RF2xy, the old behaviour is to not do channel sensing at all and simply send *right now*, which is not intended behaviour for most applications and actually prohibited for some channel/page combinations. For all values except frame retransmission limit, the defaults of 802.15.4 apply. Frame retransmission limits are set to -1 to indicate backward-compatible behaviour. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: ensure that first RF212 state comes from TRX_OFFPhoebe Buckheister
A documented erratum of the RF212 chip describes that some versions of RF212 may not be properly reset by the standard reset procedure. The described workaround seems to not fully work either; my RF212 chips will not correctly receive any frames unless they are taken from RX mode to TRX_OFF and back to RX mode, effectively forcing a up-down-up-cycle. Going to TRX_OFF and to RX without intermediate state changes at least once fixes this. The same transition is allowed for RF230, so simply do it all the time. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-16 13:04:04 +0000