| Age | Commit message (Collapse) | Author |
|---|
|
The current logic in dwc3 driver is tracking req->num_queued_sgs and
req->sg. But they can be checked base on the num_pending_sgs and
num_trbs. They are redundant and can complicate the SG logic. Let's
remove them.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/96c7bf8f6b3e91e607d5b78ea51cb1d00c614eaf.1731545781.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dwc3_request->num_queued_sgs is decremented on completion. If a
partially completed request is handled, then the
dwc3_request->num_queued_sgs no longer reflects the total number of
num_queued_sgs (it would be cleared).
Correctly check the number of request SG entries remained to be prepare
and queued. Failure to do this may cause null pointer dereference when
accessing non-existent SG entry.
Cc: stable@vger.kernel.org
Fixes: c96e6725db9d ("usb: dwc3: gadget: Correct the logic for queuing sgs")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/d07a7c4aa0fcf746cdca0515150dbe5c52000af7.1731545781.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The check whether the TRB ring is full or empty in dwc3_calc_trbs_left()
is insufficient. It assumes there are active TRBs if there's any request
in the started_list. However, that's not the case for requests with a
large SG list.
That is, if we have a single usb request that requires more TRBs than
the total TRBs in the TRB ring, the queued TRBs will be available when
all the TRBs in the ring are completed. But the request is only
partially completed and remains in the started_list. With the current
logic, the TRB ring is empty, but dwc3_calc_trbs_left() returns 0.
Fix this by additionally checking for the request->num_trbs for active
TRB count.
Cc: stable@vger.kernel.org
Fixes: 51f1954ad853 ("usb: dwc3: gadget: Fix dwc3_calc_trbs_left()")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/708dc62b56b77da1f704cc2ae9b6ddb1f2dbef1f.1731545781.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver cannot issue the End Transfer command to the SETUP transfer.
Don't clear DWC3_EP_TRANSFER_STARTED flag to make sure that the driver
won't send Start Transfer command again, which can cause no-resource
error. For example this can occur if the host issues a reset to the
device.
Cc: stable@vger.kernel.org
Fixes: 76cb323f80ac ("usb: dwc3: ep0: clear all EP0 flags")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/d3d618185fd614bb7426352a9fc1199641d3b5f5.1731545781.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17.
Fix installation of WinUSB driver using OS descriptors. Without the
fix the drivers are not installed correctly and the property
'DeviceInterfaceGUID' is missing on host side.
The original change was based on the assumption that the interface
number is in the high byte of wValue but it is in the low byte,
instead. Unfortunately, the fix is based on MS documentation which is
also wrong.
The actual USB request for OS descriptors (using USB analyzer) looks
like:
Offset 0 1 2 3 4 5 6 7
0x000 C1 A1 02 00 05 00 0A 00
C1: bmRequestType (device to host, vendor, interface)
A1: nas magic number
0002: wValue (2: nas interface)
0005: wIndex (5: get extended property i.e. nas interface GUID)
008E: wLength (142)
The fix was tested on Windows 10 and Windows 11.
Cc: stable@vger.kernel.org
Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic")
Signed-off-by: Michal Vrastil <michal.vrastil@hidglobal.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Acked-by: Peter korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20241113235433.20244-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the clock sehci->clk was not enabled in spear_ehci_hcd_drv_probe,
it should not be disabled in any path.
Conversely, if it was enabled in spear_ehci_hcd_drv_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 7675d6ba436f ("USB: EHCI: make ehci-spear a separate driver")
Cc: stable@vger.kernel.org
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241114230310.432213-1-mordan@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cocci report a double assignment warning.'wcss->version' was assigned
twice in 'q6v5_wcss_probe()'.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Link: https://lore.kernel.org/r/20240823065546.3371378-1-liyuesong@vivo.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Any write access to the IMEM region when the Q6 is setting up XPU
protection on it will result in a XPU violation. Fix this by ensuring
IMEM writes related to the MBA post-mortem logs happen before the Q6
is brought out of reset.
Fixes: 318130cc9362 ("remoteproc: qcom_q6v5_mss: Add MBA log extraction support")
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240819073020.3291287-1-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The name len field of the CMD_OPEN packet is only 16-bits and the upper
16-bits of "param2" are a different "prio" field, which can be nonzero in
certain situations, and CMD_OPEN packets can be unexpectedly dropped
because of this.
Fix this by masking out the upper 16 bits of param2.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241007235935.6216-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() to make error and defer code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011-remote-proc-dev-err-probe-v1-10-5abb4fc61eca@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() to make error and defer code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011-remote-proc-dev-err-probe-v1-9-5abb4fc61eca@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() to make error and defer code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011-remote-proc-dev-err-probe-v1-8-5abb4fc61eca@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Do not print errors of getting clocks and regulators in probe twice:
once in q6v5_init_clocks() or q6v5_regulator_init() and then again in the
probe function. This also avoids dmesg flood on deferred probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011-remote-proc-dev-err-probe-v1-7-5abb4fc61eca@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() to make error and defer code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011-remote-proc-dev-err-probe-v1-6-5abb4fc61eca@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use dev_err_probe() to make error and defer code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241011-remote-proc-dev-err-probe-v1-5-5abb4fc61eca@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Currently, the rproc "atomic_t power" variable is incremented during:
a. WPSS rproc auto boot.
b. AHB power on for ath11k.
During AHB power off (rmmod ath11k_ahb.ko), rproc_shutdown fails
to unload the WPSS firmware because the rproc->power value is '2',
causing the atomic_dec_and_test(&rproc->power) condition to fail.
Consequently, during AHB power on (insmod ath11k_ahb.ko),
QMI_WLANFW_HOST_CAP_REQ_V01 fails due to the host and firmware QMI
states being out of sync.
Fixes: 300ed425dfa9 ("remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS")
Cc: stable@vger.kernel.org
Signed-off-by: Balaji Pothunoori <quic_bpothuno@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241018105911.165415-1-quic_bpothuno@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The remoteproc "name" property is supposed to present the "human
readable" name of the remoteproc, while using the device name is
readable, it's not "friendly".
Instead, use the "sysmon_name" as the identifier for the remoteproc
instance. It matches the typical names used when we speak about each
instance, while still being unique.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20241022-rproc-friendly-name-v1-1-350c82b075cb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable support for the Audio DSP on the Qualcomm SAR2130P platform,
reusing the SM8350 resources.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-3-bd204e39d24e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Specify minidump_id for the SM8350 DSPs. It was omitted for in the
original commit e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS
remoteprocs").
Fixes: e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-2-bd204e39d24e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document compatible for audio DSP on Qualcomm SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-adsp-v1-1-bd204e39d24e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document compatible for Qualcomm SM8750 SoC ADSP PAS which looks fully
compatible with SM8550 variant. The only difference from bindings point
of view is one more interrupt ("shutdown-ack"). Marking devices as
compatible, using SM8550 ADSP PAS fallback, requires changing some of
the conditionals in "if:then:" to "contains".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241101170309.382782-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Current implementation of q6v5_wcss_probe() in qcom_q6v5_wcss.c and does
not remove the subdevs on the error path. Fix this bug by calling
qcom_remove_{ssr,sysmon,pdm,glink}_subdev(), and qcom_q6v5_deinit()
appropriately.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/c4437393bfaeda69351157849b5e0a904586b1c2.1731038950.git.joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Current implementation of adsp_probe() in qcom_q6v5_adsp.c and does not
remove the subdevs of adsp on the error path. Fix this bug by calling
qcom_remove_{ssr,sysmon,pdm,smd,glink}_subdev(), and qcom_q6v5_deinit()
appropriately.
Fixes: dc160e449122 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/fed3df4219543d46b88bacf87990d947f3fac8d7.1731038950.git.joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Current implementation of adsp_probe() in qcom_q6v5_pas.c does not
remove the subdevs of adsp on the error path. Fix this bug by calling
qcom_remove_{ssr,sysmon,pdm,smd,glink}_subdev(), qcom_q6v5_deinit(), and
adsp_unassign_memory_region() appropriately.
Fixes: 4b48921a8f74 ("remoteproc: qcom: Use common SMD edge handler")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/a1cabc64240022a7f1d5237aa2aa6f72d8fb7052.1731038950.git.joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Xuan Zhuo says:
====================
virtio-net: support AF_XDP zero copy (tx)
XDP socket(AF_XDP) is an excellent bypass kernel network framework. The zero
copy feature of xsk (XDP socket) needs to be supported by the driver. The
performance of zero copy is very good. mlx5 and intel ixgbe already support
this feature, This patch set allows virtio-net to support xsk's zerocopy xmit
feature.
At present, we have completed some preparation:
1. vq-reset (virtio spec and kernel code)
2. virtio-core premapped dma
3. virtio-net xdp refactor
So it is time for Virtio-Net to complete the support for the XDP Socket
Zerocopy.
Virtio-net can not increase the queue num at will, so xsk shares the queue with
kernel.
This patch set includes some refactor to the virtio-net to let that to support
AF_XDP.
The current configuration sets the virtqueue (vq) to premapped mode,
implying that all buffers submitted to this queue must be mapped ahead
of time. This presents a challenge for the virtnet send queue (sq): the
virtnet driver would be required to keep track of dma information for vq
size * 17, which can be substantial. However, if the premapped mode were
applied on a per-buffer basis, the complexity would be greatly reduced.
With AF_XDP enabled, AF_XDP buffers would become premapped, while kernel
skb buffers could remain unmapped.
We can distinguish them by sg_page(sg), When sg_page(sg) is NULL, this
indicates that the driver has performed DMA mapping in advance, allowing
the Virtio core to directly utilize sg_dma_address(sg) without
conducting any internal DMA mapping. Additionally, DMA unmap operations
for this buffer will be bypassed.
ENV: Qemu with vhost-user(polling mode).
Host CPU: Intel(R) Xeon(R) Platinum 8163 CPU @ 2.50GHz
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 19531092064 RX-missed: 0 RX-bytes: 1093741155584
RX-errors: 0
RX-nombuf: 0
TX-packets: 5959955552 TX-errors: 0 TX-bytes: 371030645664
Throughput (since last show)
Rx-pps: 8861574 Rx-bps: 3969985208
Tx-pps: 8861493 Tx-bps: 3969962736
############################################################################
testpmd> show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 68152727 RX-missed: 0 RX-bytes: 3816552712
RX-errors: 0
RX-nombuf: 0
TX-packets: 68114967 TX-errors: 33216 TX-bytes: 3814438152
Throughput (since last show)
Rx-pps: 6333196 Rx-bps: 2837272088
Tx-pps: 6333227 Tx-bps: 2837285936
############################################################################
But AF_XDP consumes more CPU for tx and rx napi(100% and 86%).
====================
Link: https://patch.msgid.link/20241112012928.102478-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now, we support AF_XDP(xsk). Add NETDEV_XDP_ACT_XSK_ZEROCOPY to
xdp_features.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-14-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If send queue sent some packets, we update the tx timeout
record to prevent the tx timeout.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-13-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver's tx napi is very important for XSK. It is responsible for
obtaining data from the XSK queue and sending it out.
At the beginning, we need to trigger tx napi.
virtnet_free_old_xmit distinguishes three type ptr(skb, xdp frame, xsk
buffer) by the last bits of the pointer.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-12-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since xsk's TX queue is consumed by TX NAPI, if sq is bound to xsk, then
we must stop tx napi from being disabled.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-11-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch implement the logic of bind/unbind xsk pool to sq and rq.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-10-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Because the af-xdp will introduce a new xmit type, so I refactor the
xmit type mechanism first.
We know both xdp_frame and sk_buff are at least 4 bytes aligned.
For the xdp tx, we do not pass any pointer to virtio core as data,
we just need to pass the len of the packet. So we will push len
to the void pointer. We can make sure the pointer is 4 bytes aligned.
And the data structure of AF_XDP also is at least 4 bytes aligned.
So the last two bits of the pointers are free, we can't use these to
distinguish them.
00 for skb
01 for SKB_ORPHAN
10 for XDP
11 for AF-XDP tx
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-9-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now, this API is useless. remove it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-8-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
virtio-net rq submits premapped per-buffer by setting sg page to NULL;
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-7-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Two APIs are introduced to submit premapped per-buffers.
int virtqueue_add_inbuf_premapped(struct virtqueue *vq,
struct scatterlist *sg, unsigned int num,
void *data,
void *ctx,
gfp_t gfp);
int virtqueue_add_outbuf_premapped(struct virtqueue *vq,
struct scatterlist *sg, unsigned int num,
void *data,
gfp_t gfp);
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-6-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current configuration sets the virtqueue (vq) to premapped mode,
implying that all buffers submitted to this queue must be mapped ahead
of time. This presents a challenge for the virtnet send queue (sq): the
virtnet driver would be required to keep track of dma information for vq
size * 17, which can be substantial. However, if the premapped mode were
applied on a per-buffer basis, the complexity would be greatly reduced.
With AF_XDP enabled, AF_XDP buffers would become premapped, while kernel
skb buffers could remain unmapped.
And consider that some sgs are not generated by the virtio driver,
that may be passed from the block stack. So we can not change the
sgs, new APIs are the better way.
So we pass the new argument 'premapped' to indicate the buffers
submitted to virtio are premapped in advance. Additionally,
DMA unmap operations for these buffers will be bypassed.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-5-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The subsequent commit needs to know whether every indirect buffer is
premapped or not. So we need to introduce an extra struct for every
indirect buffer to record this info.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-4-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The subsequent commit needs to know whether every indirect buffer is
premapped or not. So we need to introduce an extra struct for every
indirect buffer to record this info.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-3-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To make the code readable, introduce vring_need_unmap_buffer() to
replace do_unmap.
use_dma_api premapped -> vring_need_unmap_buffer()
1. false false false
2. true false true
3. true true false
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20241112012928.102478-2-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000)
For ice:
Mateusz refactors and adds additional SerDes configuration values to be
output.
Przemek refactors processing of DDP and adds support for a flag field in
the DDP's signature segment header.
Joe Damato adds support for persistent NAPI config.
Brett adjusts setting of Tx promiscuous based on unicast/multicast
setting.
Jake moves setting of pf->supported_rxdids to occur directly after DDP
load and changes a small struct to use stack memory.
Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue.
For ixgbe:
Diomidis Spinellis removes a circular dependency.
For igc:
Vitaly removes an unneeded autoneg parameter.
For igb:
Johnny Park fixes a couple of typos.
For igbvf:
Wander Lairson Costa removes an unused spinlock.
For e1000:
Joe Damato adds RTNL lock to some calls where it is expected to be held.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
e1000: Hold RTNL when e1000_down can be called
igbvf: remove unused spinlock
igb: Fix 2 typos in comments in igb_main.c
igc: remove autoneg parameter from igc_mac_info
ixgbe: Break include dependency cycle
ice: Unbind the workqueue
ice: use stack variable for virtchnl_supported_rxdids
ice: initialize pf->supported_rxdids immediately after loading DDP
ice: only allow Tx promiscuous for multicast
ice: Add support for persistent NAPI config
ice: support optional flags in signature segment header
ice: refactor "last" segment of DDP pkg
ice: extend dump serdes equalizer values feature
ice: rework of dump serdes equalizer values feature
====================
Link: https://patch.msgid.link/20241113185431.1289708-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Petr Machata says:
====================
net: ndo_fdb_add/del: Have drivers report whether they notified
Currently when FDB entries are added to or deleted from a VXLAN netdevice,
the VXLAN driver emits one notification, including the VXLAN-specific
attributes. The core however always sends a notification as well, a generic
one. Thus two notifications are unnecessarily sent for these operations. A
similar situation comes up with bridge driver, which also emits
notifications on its own.
# ip link add name vx type vxlan id 1000 dstport 4789
# bridge monitor fdb &
[1] 1981693
# bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1
de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent
de:ad:be:ef:13:37 dev vx self permanent
In order to prevent this duplicity, add a parameter, bool *notified, to
ndo_fdb_add and ndo_fdb_del. The flag is primed to false, and if the callee
sends a notification on its own, it sets the flag to true, thus informing
the core that it should not generate another notification.
Patches #1 to #2 are concerned with the above.
In the remaining patches, #3 to #7, add a selftest. This takes place across
several patches. Many of the helpers we would like to use for the test are
in forwarding/lib.sh, whereas net/ is a more suitable place for the test,
so the libraries need to be massaged a bit first.
====================
Link: https://patch.msgid.link/cover.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check that only one notification is produced for various FDB edit
operations.
Regarding the ip_link_add() and ip_link_master() helpers. This pattern of
action plus corresponding defer is bound to come up often, and a dedicated
vocabulary to capture it will be handy. tunnel_create() and vlan_create()
from forwarding/lib.sh are somewhat opaque and perhaps too kitchen-sinky,
so I tried to go in the opposite direction with these ones, and wrapped
only the bare minimum to schedule a corresponding cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/910c5880ae6d3b558d6889cbdba2be690c2615c6.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A number of selftests run processes in the background and need to kill them
afterwards. Instead for everyone to open-code the kill / wait / redirect
mantra, add a helper in net/lib.sh. Convert existing open-code sites.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/a9db102067d741c118f0bd93b10c75e2a34665ea.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For logging to be useful, something has to set RET and retmsg by calling
ret_set_ksft_status(). There is a suite of functions to that end in
forwarding/lib: check_err, check_fail et.al. Move them to net/lib.sh so
that every net test can use them.
Existing lib.sh users might be using these same names for their functions.
However lib.sh is always sourced near the top of the file (checked), and
whatever new definitions will simply override the ones provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/f488a00dc85b8e0c1f3c71476b32b21b5189a847.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It would be good to use the same mechanism for scheduling and dispatching
general net tests as the many forwarding tests already use. To that end,
move the logging helpers to net/lib.sh so that every net test can use them.
Existing lib.sh users might be using the name themselves. However lib.sh is
always sourced near the top of the file (checked), and whatever new
definition will simply override the one provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/a6fc083486493425b2c61185c327845b6ce3233a.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many net selftests invent their own logging helpers. These really should be
in a library sourced by these tests. Currently forwarding/lib.sh has a
suite of perfectly fine logging helpers, but sourcing a forwarding/ library
from a higher-level directory smells of layering violation. In this patch,
move the logging helpers to net/lib.sh so that every net test can use them.
Together with the logging helpers, it's also necessary to move
pause_on_fail(), and EXIT_STATUS and RET.
Existing lib.sh users might be using these same names for their functions
or variables. However lib.sh is always sourced near the top of the
file (checked), and whatever new definitions will simply override the ones
provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/edd3785a3bd72ffbe1409300989e993ee50ae98b.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a similar fashion to ndo_fdb_add, which was covered in the previous
patch, add the bool *notified argument to ndo_fdb_del. Callees that send a
notification on their own set the flag to true.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently when FDB entries are added to or deleted from a VXLAN netdevice,
the VXLAN driver emits one notification, including the VXLAN-specific
attributes. The core however always sends a notification as well, a generic
one. Thus two notifications are unnecessarily sent for these operations. A
similar situation comes up with bridge driver, which also emits
notifications on its own:
# ip link add name vx type vxlan id 1000 dstport 4789
# bridge monitor fdb &
[1] 1981693
# bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1
de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent
de:ad:be:ef:13:37 dev vx self permanent
In order to prevent this duplicity, add a paremeter to ndo_fdb_add,
bool *notified. The flag is primed to false, and if the callee sends a
notification on its own, it sets it to true, thus informing the core that
it should not generate another notification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Justin Lai says:
====================
Modifying format and renaming goto labels
This patch set primarily involves modifying the enum rtase_registers
format and renaming the goto labels in rtase_init_one.
====================
Link: https://patch.msgid.link/20241114112549.376101-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove unnecessary spaces.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241114112549.376101-3-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify the name of the goto label in rtase_init_one().
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241114112549.376101-2-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
