summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-03staging: unisys: don't care about debugfs errorsgregkh@linuxfoundation.org
A caller should never care about a debugfs error return value, and it should never abort its normal operation if something "odd" goes on. Fix up the unisys init code to not care if the root debugfs directory for the subsystem is created or not, as no place it is used will matter. Cc: David Kershner <david.kershner@unisys.com> Cc: Tim Sell <Timothy.Sell@unisys.com> Cc: Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com> Cc: David Binder <david.binder@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03mm, swap: fix race between swap count continuation operationsHuang Ying
One page may store a set of entries of the sis->swap_map (swap_info_struct->swap_map) in multiple swap clusters. If some of the entries has sis->swap_map[offset] > SWAP_MAP_MAX, multiple pages will be used to store the set of entries of the sis->swap_map. And the pages are linked with page->lru. This is called swap count continuation. To access the pages which store the set of entries of the sis->swap_map simultaneously, previously, sis->lock is used. But to improve the scalability of __swap_duplicate(), swap cluster lock may be used in swap_count_continued() now. This may race with add_swap_count_continuation() which operates on a nearby swap cluster, in which the sis->swap_map entries are stored in the same page. The race can cause wrong swap count in practice, thus cause unfreeable swap entries or software lockup, etc. To fix the race, a new spin lock called cont_lock is added to struct swap_info_struct to protect the swap count continuation page list. This is a lock at the swap device level, so the scalability isn't very well. But it is still much better than the original sis->lock, because it is only acquired/released when swap count continuation is used. Which is considered rare in practice. If it turns out that the scalability becomes an issue for some workloads, we can split the lock into some more fine grained locks. Link: http://lkml.kernel.org/r/20171017081320.28133-1-ying.huang@intel.com Fixes: 235b62176712 ("mm/swap: add cluster lock") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shaohua Li <shli@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03mm/huge_memory.c: deposit page table when copying a PMD migration entryZi Yan
We need to deposit pre-allocated PTE page table when a PMD migration entry is copied in copy_huge_pmd(). Otherwise, we will leak the pre-allocated page and cause a NULL pointer dereference later in zap_huge_pmd(). The missing counters during PMD migration entry copy process are added as well. The bug report is here: https://lkml.org/lkml/2017/10/29/214 Link: http://lkml.kernel.org/r/20171030144636.4836-1-zi.yan@sent.com Fixes: 84c3fc4e9c563 ("mm: thp: check pmd migration entry in common path") Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03initramfs: fix initramfs rebuilds w/ compression after disablingFlorian Fainelli
This is a follow-up to commit 57ddfdaa9a72 ("initramfs: fix disabling of initramfs (and its compression)"). This particular commit fixed the use case where we build the kernel with an initramfs with no compression, and then we build the kernel with no initramfs. Now this still left us with the same case as described here: http://lkml.kernel.org/r/20170521033337.6197-1-f.fainelli@gmail.com not working with initramfs compression. This can be seen by the following steps/timestamps: https://www.spinics.net/lists/kernel/msg2598153.html .initramfs_data.cpio.gz.cmd is correct: cmd_usr/initramfs_data.cpio.gz := /bin/bash ./scripts/gen_initramfs_list.sh -o usr/initramfs_data.cpio.gz -u 1000 -g 1000 /home/fainelli/work/uclinux-rootfs/romfs /home/fainelli/work/uclinux-rootfs/misc/initramfs.dev and was generated the first time we did generate the gzip initramfs, so the command has not changed, nor its arguments, so we just don't call it, no initramfs cpio is re-generated as a consequence. The fix for this problem is just to properly keep track of the .initramfs_cpio_data.d file by suffixing it with the compression extension. This takes care of properly tracking dependencies such that the initramfs get (re)generated any time files are added/deleted etc. Link: http://lkml.kernel.org/r/20170930033936.6722-1-f.fainelli@gmail.com Fixes: db2aa7fd15e8 ("initramfs: allow again choice of the embedded initramfs compression algorithm") Fixes: 9e3596b0c653 ("kbuild: initramfs cleanup, set target from Kconfig") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: "Francisco Blas Izquierdo Riera (klondike)" <klondike@xiscosoft.net> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03fs/hugetlbfs/inode.c: fix hwpoison reserve accountingMike Kravetz
Calling madvise(MADV_HWPOISON) on a hugetlbfs page will result in bad (negative) reserved huge page counts. This may not happen immediately, but may happen later when the underlying file is removed or filesystem unmounted. For example: AnonHugePages: 0 kB ShmemHugePages: 0 kB HugePages_Total: 1 HugePages_Free: 0 HugePages_Rsvd: 18446744073709551615 HugePages_Surp: 0 Hugepagesize: 2048 kB In routine hugetlbfs_error_remove_page(), hugetlb_fix_reserve_counts is called after remove_huge_page. hugetlb_fix_reserve_counts is designed to only be called/used only if a failure is returned from hugetlb_unreserve_pages. Therefore, call hugetlb_unreserve_pages as required and only call hugetlb_fix_reserve_counts in the unlikely event that hugetlb_unreserve_pages returns an error. Link: http://lkml.kernel.org/r/20171019230007.17043-2-mike.kravetz@oracle.com Fixes: 78bb920344b8 ("mm: hwpoison: dissolve in-use hugepage in unrecoverable memory error") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03ocfs2: fstrim: Fix start offset of first cluster group during fstrimAshish Samant
The first cluster group descriptor is not stored at the start of the group but at an offset from the start. We need to take this into account while doing fstrim on the first cluster group. Otherwise we will wrongly start fstrim a few blocks after the desired start block and the range can cross over into the next cluster group and zero out the group descriptor there. This can cause filesytem corruption that cannot be fixed by fsck. Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03mm, /proc/pid/pagemap: fix soft dirty marking for PMD migration entryHuang Ying
When the pagetable is walked in the implementation of /proc/<pid>/pagemap, pmd_soft_dirty() is used for both the PMD huge page map and the PMD migration entries. That is wrong, pmd_swp_soft_dirty() should be used for the PMD migration entries instead because the different page table entry flag is used. As a result, /proc/pid/pagemap may report incorrect soft dirty information for PMD migration entries. Link: http://lkml.kernel.org/r/20171017081818.31795-1-ying.huang@intel.com Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Hugh Dickins <hughd@google.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Daniel Colascione <dancol@google.com> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03userfaultfd: hugetlbfs: prevent UFFDIO_COPY to fill beyond the end of i_sizeAndrea Arcangeli
This oops: kernel BUG at fs/hugetlbfs/inode.c:484! RIP: remove_inode_hugepages+0x3d0/0x410 Call Trace: hugetlbfs_setattr+0xd9/0x130 notify_change+0x292/0x410 do_truncate+0x65/0xa0 do_sys_ftruncate.constprop.3+0x11a/0x180 SyS_ftruncate+0xe/0x10 tracesys+0xd9/0xde was caused by the lack of i_size check in hugetlb_mcopy_atomic_pte. mmap() can still succeed beyond the end of the i_size after vmtruncate zapped vmas in those ranges, but the faults must not succeed, and that includes UFFDIO_COPY. We could differentiate the retval to userland to represent a SIGBUS like a page fault would do (vs SIGSEGV), but it doesn't seem very useful and we'd need to pick a random retval as there's no meaningful syscall retval that would differentiate from SIGSEGV and SIGBUS, there's just -EFAULT. Link: http://lkml.kernel.org/r/20171016223914.2421-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-03crypto: atmel-aes - Reset the controller before each useRomain Izard
When using the rfc4543(gcm(aes))) mode, the registers of the hardware engine are not empty after use. If the engine is not reset before its next use, the following results will be invalid. Always reset the hardware engine. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: atmel-aes - properly set IV after {en,de}cryptRomain Izard
Certain cipher modes like CTS expect the IV (req->info) of ablkcipher_request (or equivalently req->iv of skcipher_request) to contain the last ciphertext block when the {en,de}crypt operation is done. Fix this issue for the Atmel AES hardware engine. The tcrypt test case for cts(cbc(aes)) is now correctly passed. In the case of in-place decryption, copy the ciphertext in an intermediate buffer before decryption. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03hwrng: core - Reset user selected rng by writing "" to rng_currentPrasannaKumar Muralidharan
User is able to select a chosen rng by writing its name to rng_current but there is no way to reset it without unbinding the rng. Let user write "" to rng_current and delesect the chosen rng. Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> reviewed-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: s5p-sss - Add HASH support for ExynosKamil Konieczny
Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW. It uses the crypto framework asynchronous hash api. It is based on omap-sham.c driver. S5P has some HW differencies and is not implemented. Modifications in s5p-sss: - Add hash supporting structures and functions. - Modify irq handler to handle both aes and hash signals. - Resize resource end in probe if EXYNOS_HASH is enabled in Kconfig. - Add new copyright line and new author. - Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6 with crypto run-time self test testmgr and with tcrypt module with: modprobe tcrypt sec=1 mode=N where N=402, 403, 404 (MD5, SHA1, SHA256). Modifications in drivers/crypto/Kconfig: - Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG and CRYPTO_DEV_S5P - Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH as they are needed for fallback. Acked-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: s5p-sss - Change spaces to tabsKamil Konieczny
Change #define lines to use tabs consistently. Acked-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: drivers - Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jamie Iles <jamie@jamieiles.com> Cc: linux-arm-kernel@axis.com Cc: linux-crypto@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Lars Persson <lars.persson@axis.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: caam/qi - abort algorithm setup on DPAA2 partsHoria Geantă
caam/qi frontend (i.e. caamalg_qi) mustn't be used in case it runs on a DPAA2 part (this could happen when using a multiplatform kernel). Fixes: 297b9cebd2fc ("crypto: caam/jr - add support for DPAA2 parts") Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: caam - fix incorrect defineRadu Alexe
Fixes: 3ebfa92f49a6 ("crypto: caam - Add new macros for building extended SEC descriptors (> 64 words)") Signed-off-by: Radu Alexe <radu.alexe@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: atmel - remove useless irq initTudor-Dan Ambarus
irq would be set to -1 and then unused, if we failed to get IORESOURCE_MEM. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: atmel - return appropriate error codeTudor-Dan Ambarus
Return -ENODEV when dma_request_slave_channel_compat() fails. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: doc - adapt api sample to use async. op waitGilad Ben-Yossef
The code sample is waiting for an async. crypto op completion. Adapt sample to use the new generic infrastructure to do the same. This also fixes a possible data coruption bug created by the use of wait_for_completion_interruptible() without dealing correctly with an interrupt aborting the wait prior to the async op finishing. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: mediatek - move to generic async completionGilad Ben-Yossef
The mediatek driver starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: qce - move to generic async completionGilad Ben-Yossef
The qce driver starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: talitos - move to generic async completionGilad Ben-Yossef
The talitos driver starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: tcrypt - move to generic async completionGilad Ben-Yossef
tcrypt starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03ima: move to generic async completionGilad Ben-Yossef
ima starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03cifs: move to generic async completionGilad Ben-Yossef
cifs starts an async. crypto op and waits for their completion. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03dm: move dm-verity to generic async completionGilad Ben-Yossef
dm-verity is starting async. crypto ops and waiting for them to complete. Move it over to generic code doing the same. This also avoids a future potential data coruption bug created by the use of wait_for_completion_interruptible() without dealing correctly with an interrupt aborting the wait prior to the async op finishing, should this code ever move to a context where signals are not masked. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> CC: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03fscrypt: move to generic async completionGilad Ben-Yossef
fscrypt starts several async. crypto ops and waiting for them to complete. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: testmgr - move to generic async completionGilad Ben-Yossef
testmgr is starting async. crypto ops and waiting for them to complete. Move it over to generic code doing the same. This also provides a test of the generic crypto async. wait code. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: gcm - move to generic async completionGilad Ben-Yossef
gcm is starting an async. crypto op and waiting for it complete. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: drbg - move to generic async completionGilad Ben-Yossef
DRBG is starting an async. crypto op and waiting for it complete. Move it over to generic code doing the same. The code now also passes CRYPTO_TFM_REQ_MAY_SLEEP flag indicating crypto request memory allocation may use GFP_KERNEL which should be perfectly fine as the code is obviously sleeping for the completion of the request any way. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: move pub key to generic async completionGilad Ben-Yossef
public_key_verify_signature() is starting an async crypto op and waiting for it to complete. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: algif - move to generic async completionGilad Ben-Yossef
algif starts several async crypto ops and waits for their completion. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: introduce crypto wait for async opGilad Ben-Yossef
Invoking a possibly async. crypto op and waiting for completion while correctly handling backlog processing is a common task in the crypto API implementation and outside users of it. This patch adds a generic implementation for doing so in preparation for using it across the board instead of hand rolled versions. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> CC: Eric Biggers <ebiggers3@gmail.com> CC: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: marvell/cesa - remove redundant backlog checks on EBUSYGilad Ben-Yossef
Now that -EBUSY return code only indicates backlog queueing we can safely remove the now redundant check for the CRYPTO_TFM_REQ_MAY_BACKLOG flag when -EBUSY is returned. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: remove redundant backlog checks on EBUSYGilad Ben-Yossef
Now that -EBUSY return code only indicates backlog queueing we can safely remove the now redundant check for the CRYPTO_TFM_REQ_MAY_BACKLOG flag when -EBUSY is returned. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03net: use -ENOSPC for transient busy indicationGilad Ben-Yossef
Replace -EBUSY with -ENOSPC when handling transient busy indication in the absence of backlog. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: ccp - use -ENOSPC for transient busy indicationGilad Ben-Yossef
Replace -EBUSY with -ENOSPC when reporting transient busy indication in the absence of backlog. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03crypto: change transient busy return code to -ENOSPCGilad Ben-Yossef
The crypto API was using the -EBUSY return value to indicate both a hard failure to submit a crypto operation into a transformation provider when the latter was busy and the backlog mechanism was not enabled as well as a notification that the operation was queued into the backlog when the backlog mechanism was enabled. Having the same return code indicate two very different conditions depending on a flag is both error prone and requires extra runtime check like the following to discern between the cases: if (err == -EINPROGRESS || (err == -EBUSY && (ahash_request_flags(req) & CRYPTO_TFM_REQ_MAY_BACKLOG))) This patch changes the return code used to indicate a crypto op failed due to the transformation provider being transiently busy to -ENOSPC. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03hwrng: xgene - Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: linux-crypto@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxHerbert Xu
Merge 4.14-rc3 in order to pick up the new timer_setup function.
2017-11-03Merge tag 'perf-core-for-mingo-4.15-20171103' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Beautify the 'kcmp' and 'prctl' syscall arguments in 'perf trace' (Arnaldo Carvalho de Melo) - Implement a way to print formatted output to per-event files in 'perf script' to facilitate generate flamegraphs, elliminating the need to write scripts to do that separation (yuzhoujian, Arnaldo Carvalho de Melo) Make 'perf stat --per-thread' update shadow stats to show metrics (Jiri Olsa) - Fix double mapping al->addr in callchain processing for children without self period (Namhyung Kim) - Fix memory leak in addr2inlines() when libbfd is not used (Namhyung Kim) - Show correct function name for srcline of callchains when libbfd is not used (Namhyung Kim) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-03staging: lustre: ldlm: remove unused field 'fwd_generation'NeilBrown
With this field gone, we don't need local variables 'imp' or 'obd' any more. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: remove unnecessary 'ownlocks' variable.NeilBrown
Now that the code has been simplified, 'ownlocks' is not necessary. The loop which sets it exits with 'lock' having the same value as 'ownlocks', or pointing to the head of the list if ownlocks is NULL. The current code then tests ownlocks and sets 'lock' to exactly the value that it currently has. So discard 'ownlocks'. Also remove unnecessary initialization of 'lock'. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: tidy list walking in ldlm_flock()NeilBrown
Use list_for_each_entry variants to avoid the explicit list_entry() calls. This allows us to use list_for_each_entry_safe_from() instread of adding a local list-walking macro. Also improve some comments so that it is more obvious that the locks are sorted per-owner and that we need to find the insertion point. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: remove 'flags' arg from ldlm_flock_destroy()NeilBrown
The only value ever passed in LDLM_FL_WAIT_NOREPROC, so assume that instead of passing it. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: remove unused 'overlaps' variableNeilBrown
'overlaps' is never used, only incremented. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: remove 'flags' arg from ldlm_process_flock_lock()NeilBrown
This is only ever set to LDLM_FL_WAIT_NOREPROC, so we can remove the arg and discard any code that is only run when it doesn't have that value. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: remove unneeded 'err' arg to ldlm_process_flock_lock()NeilBrown
This arg is used to return an error code, but the returned code is never looked at. So there is no point returning it. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: remove unused 'work_list' arg from ↵NeilBrown
ldlm_process_flock_lock() 'work_list' is only set to NULL, and is never used. So discard it. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03staging: lustre: ldlm: remove 'first_enq' arg from ldlm_process_flock_lock()NeilBrown
it is only ever set to '1', so we can just assume that and remove the code. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-23 16:59:16 +0000