| Age | Commit message (Collapse) | Author |
|---|
|
Since gfp & GFP_ATOMIC == GFP_ATOMIC is true for GFP_KERNEL | GFP_HIGH, it
will use kmalloc if user specifies that combination. Here the reason why
combining the __vmalloc_node() and kmalloc_node() is that the vmalloc does
not support all GFP flag, especially GFP_ATOMIC. So we should check if
gfp & (GFP_ATOMIC | GFP_KERNEL) != GFP_ATOMIC for vmalloc first. This
ensures caller can sleep. And for the robustness, even if vmalloc fails,
it should retry with kmalloc to allocate it.
Link: https://lkml.kernel.org/r/173008598713.1262174.2959179484209897252.stgit@mhiramat.roam.corp.google.com
Fixes: aff1871bfc81 ("objpool: fix choosing allocation for percpu slots")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/all/CAHk-=whO+vSH+XVRio8byJU8idAWES0SPGVZ7KAVdc4qrV0VUA@mail.gmail.com/
Cc: Leo Yan <leo.yan@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Wu <wuqiang.matt@bytedance.com>
Cc: Mikel Rychliski <mikel@mikelr.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
OOM kills due to vastly overestimated free highatomic reserves were
observed:
... invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0 ...
Node 0 Normal free:1482936kB boost:0kB min:410416kB low:739404kB high:1068392kB reserved_highatomic:1073152KB ...
Node 0 Normal: 1292*4kB (ME) 1920*8kB (E) 383*16kB (UE) 220*32kB (ME) 340*64kB (E) 2155*128kB (UE) 3243*256kB (UE) 615*512kB (U) 1*1024kB (M) 0*2048kB 0*4096kB = 1477408kB
The second line above shows that the OOM kill was due to the following
condition:
free (1482936kB) - reserved_highatomic (1073152kB) = 409784KB < min (410416kB)
And the third line shows there were no free pages in any
MIGRATE_HIGHATOMIC pageblocks, which otherwise would show up as type 'H'.
Therefore __zone_watermark_unusable_free() underestimated the usable free
memory by over 1GB, which resulted in the unnecessary OOM kill above.
The comments in __zone_watermark_unusable_free() warns about the potential
risk, i.e.,
If the caller does not have rights to reserves below the min
watermark then subtract the high-atomic reserves. This will
over-estimate the size of the atomic reserve but it avoids a search.
However, it is possible to keep track of free pages in reserved highatomic
pageblocks with a new per-zone counter nr_free_highatomic protected by the
zone lock, to avoid a search when calculating the usable free memory. And
the cost would be minimal, i.e., simple arithmetics in the highatomic
alloc/free/move paths.
Note that since nr_free_highatomic can be relatively small, using a
per-cpu counter might cause too much drift and defeat its purpose, in
addition to the extra memory overhead.
Dependson e0932b6c1f94 ("mm: page_alloc: consolidate free page accounting") - see [1]
[akpm@linux-foundation.org: s/if/else if/, per Johannes, stealth whitespace tweak]
Link: https://lkml.kernel.org/r/20241028182653.3420139-1-yuzhao@google.com
Link: https://lkml.kernel.org/r/0d0ddb33-fcdc-43e2-801f-0c1df2031afb@suse.cz [1]
Fixes: 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Link Lin <linkl@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 6e182dc9f268 ("selftests/mm: Use generic pkey register
manipulation") makes use of PKEY_UNRESTRICTED in
pkey_sighandler_tests. The macro has been proposed for addition to
uapi headers [1], but the patch hasn't landed yet.
Define PKEY_UNRESTRICTED in pkey-helpers.h for the time being to fix
the build.
[1] https://lore.kernel.org/all/20241028090715.509527-2-yury.khrustalev@arm.com/
Fixes: 6e182dc9f268 ("selftests/mm: Use generic pkey register manipulation")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241107131640.650703-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In the error recovery path of mlx5_vdpa_dev_add(), the cleanup is
executed and at the end put_device() is called which ends up calling
mlx5_vdpa_free(). This function will execute the same cleanup all over
again. Most resources support being cleaned up twice, but the recent
mlx5_vdpa_destroy_mr_resources() doesn't.
This change drops the explicit cleanup from within the
mlx5_vdpa_dev_add() and lets mlx5_vdpa_free() do its work.
This issue was discovered while trying to add 2 vdpa devices with the
same name:
$> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.2
$> vdpa dev add name vdpa-0 mgmtdev auxiliary/mlx5_core.sf.3
... yields the following dump:
BUG: kernel NULL pointer dereference, address: 00000000000000b8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 4 UID: 0 PID: 2811 Comm: vdpa Not tainted 6.12.0-rc6 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:destroy_workqueue+0xe/0x2a0
Code: ...
RSP: 0018:ffff88814920b9a8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888105c10000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff888100400168 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888100120c00 R09: ffffffff828578c0
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888131fd99a0 R14: 0000000000000000 R15: ffff888105c10580
FS: 00007fdfa6b4f740(0000) GS:ffff88852ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 000000018db09006 CR4: 0000000000372eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? destroy_workqueue+0xe/0x2a0
mlx5_vdpa_destroy_mr_resources+0x2b/0x40 [mlx5_vdpa]
mlx5_vdpa_free+0x45/0x150 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_put+0x8d/0x230
mlx5_vdpa_dev_add+0x328/0x8b0 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x2b8/0x4c0 [vdpa]
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x180/0x2b0
? __vdpa_alloc_device+0x1b0/0x1b0 [vdpa]
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1fc/0x2d0
netlink_sendmsg+0x1e4/0x410
__sock_sendmsg+0x38/0x60
? sockfd_lookup_light+0x12/0x60
__sys_sendto+0x105/0x160
? __count_memcg_events+0x53/0xe0
? handle_mm_fault+0x100/0x220
? do_user_addr_fault+0x40d/0x620
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x4c/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fdfa6c66b57
Code: ...
RSP: 002b:00007ffeace22998 EFLAGS: 00000202 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055a498608350 RCX: 00007fdfa6c66b57
RDX: 000000000000006c RSI: 000055a498608350 RDI: 0000000000000003
RBP: 00007ffeace229c0 R08: 00007fdfa6d35200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000202 R12: 000055a4986082a0
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeace233f3
</TASK>
Modules linked in: ...
CR2: 00000000000000b8
Fixes: 62111654481d ("vdpa/mlx5: Postpone MR deletion")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20241105185101.1323272-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
|
|
If we error in data_update_init() after adding to the rhashtable of
outstanding promotes, kfree_rcu() is required.
Reported-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Change OPT_STR max value to be 1 less than the "ARRAY_SIZE" of "_choices"
array. As a result, remove -1 from (opt->max-1) in bch2_opt_to_text.
The "_choices" array is a null-terminated array, so computing the maximum
using "ARRAY_SIZE" without subtracting 1 yields an incorrect result. Since
bch2_opt_validate don't subtract 1, as bch2_opt_to_text does, values
bigger than the actual maximum would pass through option validation.
Reported-by: syzbot+bee87a0c3291c06aa8c6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bee87a0c3291c06aa8c6
Fixes: 63c4b2545382 ("bcachefs: Better superblock opt validation")
Suggested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When allocating new btree nodes, we were leaving them on the freeable
list - unlocked - allowing them to be reclaimed: ouch.
Additionally, bch2_btree_node_free_never_used() ->
bch2_btree_node_hash_remove was putting it on the freelist, while
bch2_btree_node_free_never_used() was putting it back on the btree
update reserve list - ouch.
Originally, the code was written to always keep btree nodes on a list -
live or freeable - and this worked when new nodes were kept locked.
But now with the cycle detector, we can't keep nodes locked that aren't
tracked by the cycle detector; and this is fine as long as they're not
reachable.
We also have better and more robust leak detection now, with memory
allocation profiling, so the original justification no longer applies.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The perf_test does not check the number of iterations and threads
when it is zero. If nr_thread is 0, the perf test will keep
waiting for wakekup. If iteration is 0, it will cause exception
of division by zero. This can be reproduced by:
echo "rand_insert 0 1" > /sys/fs/bcachefs/${uuid}/perf_test
or
echo "rand_insert 1 0" > /sys/fs/bcachefs/${uuid}/perf_test
Fixes: 1c6fdbd8f246 ("bcachefs: Initial commit")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bio_kmalloc may return NULL, will cause NULL pointer dereference.
Add check NULL return for bio_kmalloc in journal_read_bucket.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Fixes: ac10a9611d87 ("bcachefs: Some fixes for building in userspace")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If BCH_FS_may_go_rw is not yet set, it indicates to the transaction
commit path that updates should be done via the list of journal replay
keys.
This must be set before multithreaded use commences.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a btree split picks a pivot that's being deleted by a btree node
merge, we're going to have problems.
Fix this by checking if the pivot is being deleted, the same as we check
for deletions in journal replay keys.
Found by single_devic.ktest small_nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Syzbot found an assertion pop, by generating an ancient filesystem
version with an invalid bkey_format (with fields that can overflow) as
well as packed keys that aren't representable unpacked.
This breaks key comparisons in all sorts of painful ways.
Filesystems have been automatically rewriting nodes with such invalid
formats for years; we can safely drop support for them.
Reported-by: syzbot+8a0109511de9d4b61217@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bucket_gen() checks if we're lookup up a valid bucket and returns NULL
otherwise, but bucket_gen_get() was failing to check; other callers were
correct.
Also do a bit of cleanup on callers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.
Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN global.test_sanity ...
# OK global.test_sanity
ok 1 global.test_sanity
# RUN global.close_in_progress ...
# OK global.close_in_progress
ok 2 global.close_in_progress
# RUN global.close_with_ref ...
# OK global.close_with_ref
ok 3 global.close_with_ref
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.
The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.
Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.
The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.
Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: ed5d7788a934 ("netlink: Do not schedule work from sk_destruct")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241106015235.2458807-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
|
Pull NVMe fix from Keith:
"nvme fix for Linux 6.13
- Use correct list traversal for srcu lists (Breno)"
* tag 'nvme-6.12-2024-11-07' of git://git.infradead.org/nvme:
nvme/host: Fix RCU list traversal to use SRCU primitive
|
|
Merge series from Kiseok Jo <kiseok.jo@irondevice.com>:
This adds basic audio support for the Iron Device SMA1307 amplifier
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The PROBE_INFO (ext_manifest type 3) is not used by the kernel, but
at every tiem the firmware is loaded the following is printed in
info level (user visible):
unknown sof_ext_man header type 3 size 0x30
The type is known, but it is not handled, the print is misleading.
|
|
This is a preparation patch for NVMeOF target reservation
commands implantation.
Add the defines of reservation command, such as reservation log
and sub operations.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
Fixes: 0de38d9f1dba ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thanks to commit 4bbd360a5084 ("socket: Print pf->create() when
it does not clear sock->sk on failure."), syzbot found an issue with AF_SMC:
smc_create must clear sock->sk on failure, family: 43, type: 1, protocol: 0
WARNING: CPU: 0 PID: 5827 at net/socket.c:1565 __sock_create+0x96f/0xa30 net/socket.c:1563
Modules linked in:
CPU: 0 UID: 0 PID: 5827 Comm: syz-executor259 Not tainted 6.12.0-rc6-next-20241106-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:__sock_create+0x96f/0xa30 net/socket.c:1563
Code: 03 00 74 08 4c 89 e7 e8 4f 3b 85 f8 49 8b 34 24 48 c7 c7 40 89 0c 8d 8b 54 24 04 8b 4c 24 0c 44 8b 44 24 08 e8 32 78 db f7 90 <0f> 0b 90 90 e9 d3 fd ff ff 89 e9 80 e1 07 fe c1 38 c1 0f 8c ee f7
RSP: 0018:ffffc90003e4fda0 EFLAGS: 00010246
RAX: 099c6f938c7f4700 RBX: 1ffffffff1a595fd RCX: ffff888034823c00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000ffffffe9 R08: ffffffff81567052 R09: 1ffff920007c9f50
R10: dffffc0000000000 R11: fffff520007c9f51 R12: ffffffff8d2cafe8
R13: 1ffffffff1a595fe R14: ffffffff9a789c40 R15: ffff8880764298c0
FS: 000055557b518380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa62ff43225 CR3: 0000000031628000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_create net/socket.c:1616 [inline]
__sys_socket_create net/socket.c:1653 [inline]
__sys_socket+0x150/0x3c0 net/socket.c:1700
__do_sys_socket net/socket.c:1714 [inline]
__se_sys_socket net/socket.c:1712 [inline]
For reference, see commit 2d859aff775d ("Merge branch
'do-not-leave-dangling-sk-pointers-in-pf-create-functions'")
Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Cc: D. Wythe <alibuda@linux.alibaba.com>
Cc: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://patch.msgid.link/20241106221922.1544045-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SMC-R variant of the SMC protocol used direct call to function
ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device
driver to run SMC-R, it failed to find a device, because in mlx5_ib the
internal net device management for retrieving net devices was replaced
by a common interface ib_device_get_netdev() in commit 8d159eb2117b
("RDMA/mlx5: Use IB set_netdev and get_netdev functions").
Since such direct accesses to the internal net device management is not
recommended at all, update the SMC-R code to use proper API
ib_device_get_netdev().
Fixes: 54903572c23c ("net/smc: allow pnetid-less configuration")
Reported-by: Aswin K <aswin@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20241106082612.57803-1-wenjia@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TDX 1.0 defines baseline behaviour of TDX guest platform. TDX 1.0
generates a #VE when accessing topology-related CPUID leafs (0xB and
0x1F) and the X2APIC_APICID MSR. The kernel returns all zeros on CPUID
topology. In practice, this means that the kernel can only boot with a
plain topology. Any complications will cause problems.
The ENUM_TOPOLOGY feature allows the VMM to provide topology
information to the guest. Enabling the feature eliminates
topology-related #VEs: the TDX module virtualizes accesses to
the CPUID leafs and the MSR.
Enable ENUM_TOPOLOGY if it is available.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-5-kirill.shutemov%40linux.intel.com
|
|
Memory access #VEs are hard for Linux to handle in contexts like the
entry code or NMIs. But other OSes need them for functionality.
There's a static (pre-guest-boot) way for a VMM to choose one or the
other. But VMMs don't always know which OS they are booting, so they
choose to deliver those #VEs so the "other" OSes will work. That,
unfortunately has left us in the lurch and exposed to these
hard-to-handle #VEs.
The TDX module has introduced a new feature. Even if the static
configuration is set to "send nasty #VEs", the kernel can dynamically
request that they be disabled. Once they are disabled, access to private
memory that is not in the Mapped state in the Secure-EPT (SEPT) will
result in an exit to the VMM rather than injecting a #VE.
Check if the feature is available and disable SEPT #VE if possible.
If the TD is allowed to disable/enable SEPT #VEs, the ATTR_SEPT_VE_DISABLE
attribute is no longer reliable. It reflects the initial state of the
control for the TD, but it will not be updated if someone (e.g. bootloader)
changes it before the kernel starts. Kernel must check TDCS_TD_CTLS bit to
determine if SEPT #VEs are enabled or disabled.
[ dhansen: remove 'return' at end of function ]
Fixes: 373e715e31bf ("x86/tdx: Panic on bad configs that #VE on "private" memory access")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-4-kirill.shutemov%40linux.intel.com
|
|
Rename tdx_parse_tdinfo() to tdx_setup() and move setting NOTIFY_ENABLES
there.
The function will be extended to adjust TD configuration.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-3-kirill.shutemov%40linux.intel.com
|
|
The TDG_VM_WR TDCALL is used to ask the TDX module to change some
TD-specific VM configuration. There is currently only one user in the
kernel of this TDCALL leaf. More will be added shortly.
Refactor to make way for more users of TDG_VM_WR who will need to modify
other TD configuration values.
Add a wrapper for the TDG_VM_RD TDCALL that requests TD-specific
metadata from the TDX module. There are currently no users for
TDG_VM_RD. Mark it as __maybe_unused until the first user appears.
This is preparation for enumeration and enabling optional TD features.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/all/20241104103803.195705-2-kirill.shutemov%40linux.intel.com
|
|
Replace the raw atomic_t reference counting of zone write plugs with a
refcount_t. No functional changes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411050650.ilIZa8S7-lkp@intel.com/
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241107065438.236348-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently in fp-stress we test signal delivery to the test threads by
sending SIGUSR2 which simply counts how many signals are delivered. The
test programs now also all have a SIGUSR1 handler which for the threads
doing userspace testing additionally modifies the floating point register
state in the signal handler, verifying that when we return the saved
register state is restored from the signal context as expected. Switch over
to triggering that to validate that we are restoring as expected.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-6-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The other stress test programs provide a SIGUSR1 handler which modifies the
live register state in order to validate that signal context is being
restored during signal return. While we can't usefully do this when testing
kernel mode FP usage provide a handler for SIGUSR1 which just counts the
number of signals like we do for SIGUSR2, allowing fp-stress to treat all
the test programs uniformly.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-5-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we don't use the irritator signal in our floating point stress
tests so when we added ZA and ZT stress tests we didn't actually bother
implementing any actual action in the handlers, we just counted the signal
deliveries. In preparation for using the irritators let's implement them,
just trivially SMSTOP and SMSTART to reset all bits in the register to 0.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-4-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The irritator handlers for the fp-stress test programs all use ADR to load
an address into x0 which is then not referenced. Remove these ADRs as they
just cause confusion.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-2-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The comments in the handlers for the irritator signal in the test threads
for fp-stress suggest that the irritator will corrupt the register state
observed by the main thread but this is not the case, instead the FPSIMD
and SVE irritators (which are the only ones that are implemented) modify
the current register state which is expected to be overwritten on return
from the handler by the saved register state. Update the comment to reflect
what the handler is actually doing.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-1-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update
Erik Schumacher found and fixed a problem in the calculation of the
PWM period setting yielding too long periods. Trevor Gamblin - who
already cared about mainlining the pwm-axi-pwmgen driver - stepped
forward as an additional reviewer.
Thanks to Erik and Trevor"
* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
pwm: imx-tpm: Use correct MODULO value for EPWM mode
|
|
seq_printf is costy, on a system with n CPUs, reading /proc/softirqs
would yield 10*n decimal values, and the extra cost parsing format string
grows linearly with number of cpus. Replace seq_printf with
seq_put_decimal_ull_width have significant performance improvement.
On an 8CPUs system, reading /proc/softirqs show ~40% performance
gain with this patch.
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I can't find any sign of atou() having been used. Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240913005753.1392431-1-linux@treblig.org
|
|
While fp-stress is waiting for children to start it doesn't send any
signals to them so there is no need for it to have as short an epoll()
timeout as it does when the children are all running. We do still want to
have some timeout so that we can log diagnostics about missing children but
this can be relatively large. On emulated platforms the overhead of running
the supervisor process is quite high, especially during the process of
execing the test binaries.
Implement a longer epoll() timeout during the setup phase, using a 5s
timeout while waiting for children and switching to the signal raise
interval when all the children are started and we start sending signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-2-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we only deliver signals to the processes being tested about once
a second, meaning that the signal code paths are subject to relatively
little stress. Increase this frequency substantially to 25ms intervals,
along with some minor refactoring to make this more readily tuneable and
maintain the 1s logging interval. This interval was chosen based on some
experimentation with emulated platforms to avoid causing so much extra load
that the test starts to run into the 45s limit for selftests or generally
completely disconnect the timeout numbers from the
We could increase this if we moved the signal generation out of the main
supervisor thread, though we should also consider that he percentage of
time that we spend interacting with the floating point state is also a
consideration.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-1-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
iommufd_fault_iopf_enable has limitation to PRI on PCI/SRIOV VFs because
the PRI might be a shared resource and current iommu subsystem is not
ready to support enabling/disabling PRI on a VF without any impact on
others.
However, we have devices that appear as PCI but are actually on the AMBA
bus. These fake PCI devices have PASID capability, support stall as well
as SRIOV, so remove the limitation for these devices.
Link: https://patch.msgid.link/r/20241107043711.116-1-zhangfei.gao@linaro.org
Co-developed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The current panthor_device_mmap_io() implementation has two issues:
1. For mapping DRM_PANTHOR_USER_FLUSH_ID_MMIO_OFFSET,
panthor_device_mmap_io() bails if VM_WRITE is set, but does not clear
VM_MAYWRITE. That means userspace can use mprotect() to make the mapping
writable later on. This is a classic Linux driver gotcha.
I don't think this actually has any impact in practice:
When the GPU is powered, writes to the FLUSH_ID seem to be ignored; and
when the GPU is not powered, the dummy_latest_flush page provided by the
driver is deliberately designed to not do any flushes, so the only thing
writing to the dummy_latest_flush could achieve would be to make *more*
flushes happen.
2. panthor_device_mmap_io() does not block MAP_PRIVATE mappings (which are
mappings without the VM_SHARED flag).
MAP_PRIVATE in combination with VM_MAYWRITE indicates that the VMA has
copy-on-write semantics, which for VM_PFNMAP are semi-supported but
fairly cursed.
In particular, in such a mapping, the driver can only install PTEs
during mmap() by calling remap_pfn_range() (because remap_pfn_range()
wants to **store the physical address of the mapped physical memory into
the vm_pgoff of the VMA**); installing PTEs later on with a fault
handler (as panthor does) is not supported in private mappings, and so
if you try to fault in such a mapping, vmf_insert_pfn_prot() splats when
it hits a BUG() check.
Fix it by clearing the VM_MAYWRITE flag (userspace writing to the FLUSH_ID
doesn't make sense) and requiring VM_SHARED (copy-on-write semantics for
the FLUSH_ID don't make sense).
Reproducers for both scenarios are in the notes of my patch on the mailing
list; I tested that these bugs exist on a Rock 5B machine.
Note that I only compile-tested the patch, I haven't tested it; I don't
have a working kernel build setup for the test machine yet. Please test it
before applying it.
Cc: stable@vger.kernel.org
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105-panthor-flush-page-fixes-v1-1-829aaf37db93@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following series contains a Netfilter fix:
1) Wait for rcu grace period after netdevice removal is reported via event.
* tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: wait for rcu grace period on net_device removal
====================
Link: https://patch.msgid.link/20241107113212.116634-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Write the size of the optional payload of SOF_IPC4_MOD_INIT_INSTANCE
message to extension param_size-bits.
The previous IPC4 version does not set these bits that should indicate
the size of the optional payload (struct sof_ipc4_probe_cfg). The old
firmware side component code works well without these bits, but when
the probes are converted to use the generic module API, this does not
work anymore.
Fixes: f5623593060f ("ASoC: SOF: IPC4: probes: Implement IPC4 ops for probes client device")
Signed-off-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241107132840.17386-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support setting the word delay using the -w/--word-delay command line
parameter. Note that spidev exposes word delay only as an u8, allowing
for a maximum of 255us of delay to be inserted.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://patch.msgid.link/20241107-spidev-test-word-delay-v1-1-d4bba5569e39@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Similar to commit cac075706f29 ("drm/panthor: Fix race when converting
group handle to group object") we need to use the XArray's internal
locking when retrieving a vm pointer from there.
v2: Removed part of the patch that was trying to protect fetching
the heap pointer from XArray, as that operation is protected by
the @pool->lock.
Fixes: 647810ec2476 ("drm/panthor: Add the MMU/VM logical block")
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106185806.389089-1-liviu.dudau@arm.com
|
|
In the function ux500_msp_drv_probe, the 'int' type cast
in front of the PTR_ERR() macro is redundant, thus remove
it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20241107075440.2770-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
hda_dai_suspend() was added to handle paused stream during system
suspend. But as a side effect, it also ends up cleaning up the DMA
data for those streams that were prepared but not triggered before a
system suspend. Since these streams will not receive the prepare
callback after resuming, we need to preserve the DMA data during suspend.
So, add the check to handle only those streams that are in the paused
state to avoid losing the DMA data for all other streams.
Link: https://github.com/thesofproject/linux/issues/5080
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241107134957.25160-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.
Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240825132131.6643-1-hdegoede@redhat.com
|
