summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-03-04Merge tag 'wireless-2025-03-04' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== bugfixes for 6.14: * regressions from this cycle: - mac80211: fix sparse warning for monitor - nl80211: disable multi-link reconfiguration (needs fixing) * older issues: - cfg80211: reject badly combined cooked monitor, fix regulatory hint validity checks - mac80211: handle TXQ flush w/o driver per-sta flush, fix debugfs for monitor, fix element inheritance - iwlwifi: fix rfkill, dead firmware handling, rate API version, free A-MSDU handling, avoid large allocations, fix string format - brcmfmac: fix power handling on some boards * tag 'wireless-2025-03-04' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: nl80211: disable multi-link reconfiguration wifi: cfg80211: regulatory: improve invalid hints checking wifi: brcmfmac: keep power during suspend if board requires it wifi: mac80211: Fix sparse warning for monitor_sdata wifi: mac80211: fix vendor-specific inheritance wifi: mac80211: fix MLE non-inheritance parsing wifi: iwlwifi: Fix A-MSDU TSO preparation wifi: iwlwifi: Free pages allocated when failing to build A-MSDU wifi: iwlwifi: limit printed string from FW file wifi: iwlwifi: mvm: use the right version of the rate API wifi: iwlwifi: mvm: don't try to talk to a dead firmware wifi: iwlwifi: mvm: don't dump the firmware state upon RFKILL while suspend wifi: iwlwifi: mvm: clean up ROC on failure wifi: iwlwifi: fw: avoid using an uninitialized variable wifi: iwlwifi: fw: allocate chained SG tables for dump wifi: mac80211: remove debugfs dir for virtual monitor wifi: mac80211: Cleanup sta TXQs on flush wifi: nl80211: reject cooked mode if it is set along with other flags ==================== Link: https://patch.msgid.link/20250304124435.126272-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04s390/ftrace: Fix return address recovery of traced functionSumanth Korikkar
When fgraph is enabled the traced function return address is replaced with trampoline return_to_handler(). The original return address of the traced function is saved in per task return stack along with a stack pointer for reliable stack unwinding via function_graph_enter_regs(). During stack unwinding e.g. for livepatching, ftrace_graph_ret_addr() identifies the original return address of the traced function with the saved stack pointer. With a recent change, the stack pointers passed to ftrace_graph_ret_addr() and function_graph_enter_regs() do not match anymore, and therefore the original return address is not found. Pass the correct stack pointer to function_graph_enter_regs() to fix this. Fixes: 7495e179b478 ("s390/tracing: Enable HAVE_FTRACE_GRAPH_FUNC") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04selftests/vDSO: Fix GNU hash table entry size for s390xThomas Weißschuh
Commit 14be4e6f3522 ("selftests: vDSO: fix ELF hash table entry size for s390x") changed the type of the ELF hash table entries to 64bit on s390x. However the *GNU* hash tables entries are always 32bit. The "bucket" pointer is shared between both hash algorithms. On s390, this caused the GNU hash algorithm to access its 32-bit entries as if they were 64-bit, triggering compiler warnings (assignment between "Elf64_Xword *" and "Elf64_Word *") and runtime crashes. Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash. Fixes: e0746bde6f82 ("selftests/vDSO: support DT_GNU_HASH") Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20250217-selftests-vdso-s390-gnu-hash-v2-1-f6c2532ffe2a@linutronix.de Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04s390/traps: Fix test_monitor_call() inline assemblyHeiko Carstens
The test_monitor_call() inline assembly uses the xgr instruction, which also modifies the condition code, to clear a register. However the clobber list of the inline assembly does not specify that the condition code is modified, which may lead to incorrect code generation. Use the lhi instruction instead to clear the register without that the condition code is modified. Furthermore this limits clearing to the lower 32 bits of val, since its type is int. Fixes: 17248ea03674 ("s390: fix __EMIT_BUG() macro") Cc: stable@vger.kernel.org Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2025-03-04ALSA: hda: realtek: fix incorrect IS_REACHABLE() usageArnd Bergmann
The alternative path leads to a build error after a recent change: sound/pci/hda/patch_realtek.c: In function 'alc233_fixup_lenovo_low_en_micmute_led': include/linux/stddef.h:9:14: error: called object is not a function or function pointer 9 | #define NULL ((void *)0) | ^ sound/pci/hda/patch_realtek.c:5041:49: note: in expansion of macro 'NULL' 5041 | #define alc233_fixup_lenovo_line2_mic_hotkey NULL | ^~~~ sound/pci/hda/patch_realtek.c:5063:9: note: in expansion of macro 'alc233_fixup_lenovo_line2_mic_hotkey' 5063 | alc233_fixup_lenovo_line2_mic_hotkey(codec, fix, action); Using IS_REACHABLE() is somewhat questionable here anyway since it leads to the input code not working when the HDA driver is builtin but input is in a loadable module. Replace this with a hard compile-time dependency on CONFIG_INPUT. In practice this won't chance much other than solve the compiler error because it is rare to require sound output but no input support. Fixes: f603b159231b ("ALSA: hda/realtek - add supported Mic Mute LED for Lenovo platform") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250304142620.582191-1-arnd@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-03-04ASoC: cs42l43: Add jack delay debounce after suspendMaciej Strozek
Hardware reports jack absent after reset/suspension regardless of jack state, so introduce an additional delay only in suspension case to allow proper detection to take place after a short delay. Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250304140504.139245-1-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04usb: xhci: Fix host controllers "dying" after suspend and resumeMichal Pecio
A recent cleanup went a bit too far and dropped clearing the cycle bit of link TRBs, so it stays different from the rest of the ring half of the time. Then a race occurs: if the xHC reaches such link TRB before more commands are queued, the link's cycle bit unintentionally matches the xHC's cycle so it follows the link and waits for further commands. If more commands are queued before the xHC gets there, inc_enq() flips the bit so the xHC later sees a mismatch and stops executing commands. This function is called before suspend and 50% of times after resuming the xHC is doomed to get stuck sooner or later. Then some Stop Endpoint command fails to complete in 5 seconds and this shows up xhci_hcd 0000:00:10.0: xHCI host not responding to stop endpoint command xhci_hcd 0000:00:10.0: xHCI host controller not responding, assume dead xhci_hcd 0000:00:10.0: HC died; cleaning up followed by loss of all USB decives on the affected bus. That's if you are lucky, because if Set Deq gets stuck instead, the failure is silent. Likely responsible for kernel bug 219824. I found this while searching for possible causes of that regression and reproduced it locally before hearing back from the reporter. To repro, simply wait for link cycle to become set (debugfs), then suspend, resume and wait. To accelerate the failure I used a script which repeatedly starts and stops a UVC camera. Some HCs get fully reinitialized on resume and they are not affected. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219824 Fixes: 36b972d4b7ce ("usb: xhci: improve xhci_clear_command_ring()") Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250304113147.3322584-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-04net: hns3: make sure ptp clock is unregister and freed if ↵Peiyang Wang
hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed. Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04wifi: nl80211: disable multi-link reconfigurationJohannes Berg
Both the APIs in cfg80211 and the implementation in mac80211 aren't really ready yet, we have a large number of fixes. In addition, it's not possible right now to discover support for this feature from userspace. Disable it for now, there's no rush. Link: https://patch.msgid.link/20250303110538.fbeef42a5687.Iab122c22137e5675ebd99f5c031e30c0e5c7af2e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-04net: dsa: rtl8366rb: don't prompt users for LED controlJakub Kicinski
Make NET_DSA_REALTEK_RTL8366RB_LEDS a hidden symbol. It seems very unlikely user would want to intentionally disable it. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250228004534.3428681-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlinkNikolay Aleksandrov
Partially revert commit b71724147e73 ("be2net: replace polling with sleeping in the FW completion path") w.r.t mcc mutex it introduces and the use of usleep_range. The be2net be_ndo_bridge_getlink() callback is called with rcu_read_lock, so this code has been broken for a long time. Both the mutex_lock and the usleep_range can cause the issue Ian Kumlien reported[1]. The call path is: be_ndo_bridge_getlink -> be_cmd_get_hsw_config -> be_mcc_notify_wait -> be_mcc_wait_compl -> usleep_range() [1] https://lore.kernel.org/netdev/CAA85sZveppNgEVa_FD+qhOMtG_AavK9_mFiU+jWrMtXmwqefGA@mail.gmail.com/ Tested-by: Ian Kumlien <ian.kumlien@gmail.com> Fixes: b71724147e73 ("be2net: replace polling with sleeping in the FW completion path") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250227164129.1201164-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04x86/cpu: Properly parse CPUID leaf 0x2 TLB descriptor 0x63Ahmed S. Darwish
CPUID leaf 0x2's one-byte TLB descriptors report the number of entries for specific TLB types, among other properties. Typically, each emitted descriptor implies the same number of entries for its respective TLB type(s). An emitted 0x63 descriptor is an exception: it implies 4 data TLB entries for 1GB pages and 32 data TLB entries for 2MB or 4MB pages. For the TLB descriptors parsing code, the entry count for 1GB pages is encoded at the intel_tlb_table[] mapping, but the 2MB/4MB entry count is totally ignored. Update leaf 0x2's parsing logic 0x2 to account for 32 data TLB entries for 2MB/4MB pages implied by the 0x63 descriptor. Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU") Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250304085152.51092-4-darwi@linutronix.de
2025-03-04x86/cpu: Validate CPUID leaf 0x2 EDX outputAhmed S. Darwish
CPUID leaf 0x2 emits one-byte descriptors in its four output registers EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most significant bit (MSB) of each register must be clear. Leaf 0x2 parsing at intel.c only validated the MSBs of EAX, EBX, and ECX, but left EDX unchecked. Validate EDX's most-significant bit as well. Fixes: e0ba94f14f74 ("x86/tlb_info: get last level TLB entry number of CPU") Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250304085152.51092-3-darwi@linutronix.de
2025-03-04x86/cacheinfo: Validate CPUID leaf 0x2 EDX outputAhmed S. Darwish
CPUID leaf 0x2 emits one-byte descriptors in its four output registers EAX, EBX, ECX, and EDX. For these descriptors to be valid, the most significant bit (MSB) of each register must be clear. The historical Git commit: 019361a20f016 ("- pre6: Intel: start to add Pentium IV specific stuff (128-byte cacheline etc)...") introduced leaf 0x2 output parsing. It only validated the MSBs of EAX, EBX, and ECX, but left EDX unchecked. Validate EDX's most-significant bit. Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250304085152.51092-2-darwi@linutronix.de
2025-03-04mm/slab/kvfree_rcu: Switch to WQ_MEM_RECLAIM wqUladzislau Rezki (Sony)
Currently kvfree_rcu() APIs use a system workqueue which is "system_unbound_wq" to driver RCU machinery to reclaim a memory. Recently, it has been noted that the following kernel warning can be observed: <snip> workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_scan_work is flushing !WQ_MEM_RECLAIM events_unbound:kfree_rcu_work WARNING: CPU: 21 PID: 330 at kernel/workqueue.c:3719 check_flush_dependency+0x112/0x120 Modules linked in: intel_uncore_frequency(E) intel_uncore_frequency_common(E) skx_edac(E) ... CPU: 21 UID: 0 PID: 330 Comm: kworker/u144:6 Tainted: G E 6.13.2-0_g925d379822da #1 Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM20 02/01/2023 Workqueue: nvme-wq nvme_scan_work RIP: 0010:check_flush_dependency+0x112/0x120 Code: 05 9a 40 14 02 01 48 81 c6 c0 00 00 00 48 8b 50 18 48 81 c7 c0 00 00 00 48 89 f9 48 ... RSP: 0018:ffffc90000df7bd8 EFLAGS: 00010082 RAX: 000000000000006a RBX: ffffffff81622390 RCX: 0000000000000027 RDX: 00000000fffeffff RSI: 000000000057ffa8 RDI: ffff88907f960c88 RBP: 0000000000000000 R08: ffffffff83068e50 R09: 000000000002fffd R10: 0000000000000004 R11: 0000000000000000 R12: ffff8881001a4400 R13: 0000000000000000 R14: ffff88907f420fb8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88907f940000(0000) knlGS:0000000000000000 CR2: 00007f60c3001000 CR3: 000000107d010005 CR4: 00000000007726f0 PKRU: 55555554 Call Trace: <TASK> ? __warn+0xa4/0x140 ? check_flush_dependency+0x112/0x120 ? report_bug+0xe1/0x140 ? check_flush_dependency+0x112/0x120 ? handle_bug+0x5e/0x90 ? exc_invalid_op+0x16/0x40 ? asm_exc_invalid_op+0x16/0x20 ? timer_recalc_next_expiry+0x190/0x190 ? check_flush_dependency+0x112/0x120 ? check_flush_dependency+0x112/0x120 __flush_work.llvm.1643880146586177030+0x174/0x2c0 flush_rcu_work+0x28/0x30 kvfree_rcu_barrier+0x12f/0x160 kmem_cache_destroy+0x18/0x120 bioset_exit+0x10c/0x150 disk_release.llvm.6740012984264378178+0x61/0xd0 device_release+0x4f/0x90 kobject_put+0x95/0x180 nvme_put_ns+0x23/0xc0 nvme_remove_invalid_namespaces+0xb3/0xd0 nvme_scan_work+0x342/0x490 process_scheduled_works+0x1a2/0x370 worker_thread+0x2ff/0x390 ? pwq_release_workfn+0x1e0/0x1e0 kthread+0xb1/0xe0 ? __kthread_parkme+0x70/0x70 ret_from_fork+0x30/0x40 ? __kthread_parkme+0x70/0x70 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- <snip> To address this switch to use of independent WQ_MEM_RECLAIM workqueue, so the rules are not violated from workqueue framework point of view. Apart of that, since kvfree_rcu() does reclaim memory it is worth to go with WQ_MEM_RECLAIM type of wq because it is designed for this purpose. Fixes: 6c6c47b063b5 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"), Reported-by: Keith Busch <kbusch@kernel.org> Closes: https://lore.kernel.org/all/Z7iqJtCjHKfo8Kho@kbusch-mbp/ Cc: stable@vger.kernel.org Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2025-03-04usb: dwc3: Set SUSPENDENABLE soon after phy initThinh Nguyen
After phy initialization, some phy operations can only be executed while in lower P states. Ensure GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY are set soon after initialization to avoid blocking phy ops. Previously the SUSPENDENABLE bits are only set after the controller initialization, which may not happen right away if there's no gadget driver or xhci driver bound. Revise this to clear SUSPENDENABLE bits only when there's mode switching (change in GCTL.PRTCAPDIR). Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init") Cc: stable <stable@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/633aef0afee7d56d2316f7cc3e1b2a6d518a8cc9.1738280911.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()Andrea Righi
If a BPF scheduler provides an invalid CPU (outside the nr_cpu_ids range) as prev_cpu to scx_bpf_select_cpu_dfl() it can cause a kernel crash. To prevent this, validate prev_cpu in scx_bpf_select_cpu_dfl() and trigger an scx error if an invalid CPU is specified. Fixes: f0e1a0643a59b ("sched_ext: Implement BPF extensible scheduler class") Cc: stable@vger.kernel.org # v6.12+ Signed-off-by: Andrea Righi <arighi@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2025-03-03Merge tag 'affs-6.14-rc5-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull affs fixes from David Sterba: "Two fixes from Simon Tatham. They're real bugfixes for problems with OFS floppy disks created on linux and then read in the emulated Workbench environment" * tag 'affs-6.14-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: don't write overlarge OFS data block size fields affs: generate OFS sequence numbers starting at 1
2025-03-03Merge tag 'xfs-fixes-6.14-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs cleanups from Carlos Maiolino: "Just a few cleanups" * tag 'xfs-fixes-6.14-rc6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove the XBF_STALE check from xfs_buf_rele_cached xfs: remove most in-flight buffer accounting xfs: decouple buffer readahead from the normal buffer read path xfs: reduce context switches for synchronous buffered I/O
2025-03-03Merge tag 'probes-fixes-v6.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probe events fixes from Masami Hiramatsu: - probe-events: Remove unused MAX_ARG_BUF_LEN macro - it is not used - fprobe-events: Log error for exceeding the number of entry args. Since the max number of entry args is limited, it should be checked and rejected when the parser detects it. - tprobe-events: Reject invalid tracepoint name If a user specifies an invalid tracepoint name (e.g. including '/') then the new event is not defined correctly in the eventfs. - tprobe-events: Fix a memory leak when tprobe defined with $retval There is a memory leak if tprobe is defined with $retval. * tag 'probes-fixes-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: probe-events: Remove unused MAX_ARG_BUF_LEN macro tracing: fprobe-events: Log error for exceeding the number of entry args tracing: tprobe-events: Reject invalid tracepoint name tracing: tprobe-events: Fix a memory leak when tprobe with $retval
2025-03-03KVM: selftests: Fix printf() format goof in SEV smoke testSean Christopherson
Print out the index of mismatching XSAVE bytes using unsigned decimal format. Some versions of clang complain about trying to print an integer as an unsigned char. x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char' but the argument has type 'int' [-Werror,-Wformat] Fixes: 8c53183dbaa2 ("selftests: kvm: add test for transferring FPU state into VMSA") Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-03-03KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stageSean Christopherson
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried to write to a read-only page. If a vCPU manages to complete an entire iteration of the loop without hitting a read-only page, *and* the vCPU observes mprotect_ro_done before starting a second iteration, then the vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and get out of sequence. Replace the "do-while (!r)" loop around the associated _vcpu_run() with a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit -EFAULT, and retrying on success is super confusion, hides KVM bugs, and complicates this fix. The do-while loop was semi-unintentionally added specifically to fudge around a KVM x86 bug, and said bug is unhittable without modifying the test to force x86 down the !(x86||arm64) path. On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger emulation of the store to memory. Due a (very, very) longstanding bug in KVM x86's emulator, emulate writes to guest memory that fail during __kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that is desirable in the !memslot case, it's wrong in this case as the failure happens due to __copy_to_user() hitting a read-only page, not an emulated MMIO region. But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards are clobbered to force x86 down the common path, and of course the unexpected MMIO is a KVM bug, i.e. *should* cause a test failure. Fixes: b6c304aec648 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)") Reported-by: Yan Zhao <yan.y.zhao@intel.com> Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com Debugged-by: Yan Zhao <yan.y.zhao@intel.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Tested-by: Yan Zhao <yan.y.zhao@intel.com> Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-03-03KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3Sean Christopherson
Never rely on the CPU to restore/load host DR0..DR3 values, even if the CPU supports DebugSwap, as there are no guarantees that SNP guests will actually enable DebugSwap on APs. E.g. if KVM were to rely on the CPU to load DR0..DR3 and skipped them during hw_breakpoint_restore(), KVM would run with clobbered-to-zero DRs if an SNP guest created APs without DebugSwap enabled. Update the comment to explain the dangers, and hopefully prevent breaking KVM in the future. Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20250227012541.3234589-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-03-03KVM: SVM: Save host DR masks on CPUs with DebugSwapSean Christopherson
When running SEV-SNP guests on a CPU that supports DebugSwap, always save the host's DR0..DR3 mask MSR values irrespective of whether or not DebugSwap is enabled, to ensure the host values aren't clobbered by the CPU. And for now, also save DR0..DR3, even though doing so isn't necessary (see below). SVM_VMGEXIT_AP_CREATE is deeply flawed in that it allows the *guest* to create a VMSA with guest-controlled SEV_FEATURES. A well behaved guest can inform the hypervisor, i.e. KVM, of its "requested" features, but on CPUs without ALLOWED_SEV_FEATURES support, nothing prevents the guest from lying about which SEV features are being enabled (or not!). If a misbehaving guest enables DebugSwap in a secondary vCPU's VMSA, the CPU will load the DR0..DR3 mask MSRs on #VMEXIT, i.e. will clobber the MSRs with '0' if KVM doesn't save its desired value. Note, DR0..DR3 themselves are "ok", as DR7 is reset on #VMEXIT, and KVM restores all DRs in common x86 code as needed via hw_breakpoint_restore(). I.e. there is no risk of host DR0..DR3 being clobbered (when it matters). However, there is a flaw in the opposite direction; because the guest can lie about enabling DebugSwap, i.e. can *disable* DebugSwap without KVM's knowledge, KVM must not rely on the CPU to restore DRs. Defer fixing that wart, as it's more of a documentation issue than a bug in the code. Note, KVM added support for DebugSwap on commit d1f85fbe836e ("KVM: SEV: Enable data breakpoints in SEV-ES"), but that is not an appropriate Fixes, as the underlying flaw exists in hardware, not in KVM. I.e. all kernels that support SEV-SNP need to be patched, not just kernels with KVM's full support for DebugSwap (ignoring that DebugSwap support landed first). Opportunistically fix an incorrect statement in the comment; on CPUs without DebugSwap, the CPU does NOT save or load debug registers, i.e. Fixes: e366f92ea99e ("KVM: SEV: Support SEV-SNP AP Creation NAE event") Cc: stable@vger.kernel.org Cc: Naveen N Rao <naveen@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20250227012541.3234589-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2025-03-03drm/sched: Fix preprocessor guardPhilipp Stanner
When writing the header guard for gpu_scheduler_trace.h, a typo, apparently, occurred. Fix the typo and document the scope of the guard. Fixes: 353da3c520b4 ("drm/amdgpu: add tracepoint for scheduler (v2)") Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20250218124149.118002-2-phasta@kernel.org
2025-03-03hwmon: fix a NULL vs IS_ERR_OR_NULL() check in xgene_hwmon_probe()Xinghuo Chen
The devm_memremap() function returns error pointers on error, it doesn't return NULL. Fixes: c7cefce03e69 ("hwmon: (xgene) access mailbox as RAM") Signed-off-by: Xinghuo Chen <xinghuo.chen@foxmail.com> Link: https://lore.kernel.org/r/tencent_9AD8E7683EC29CAC97496B44F3F865BA070A@qq.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-03-03llc: do not use skb_get() before dev_queue_xmit()Eric Dumazet
syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+da65c993ae113742a25f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67c020c0.050a0220.222324.0011.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-03-03ASoC: tegra: Fix ADX S24_LE audio formatThorsten Blum
Commit 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") added support for the S24_LE audio format, but duplicated S16_LE in OUT_DAI() for ADX instead. Fix this by adding support for the S24_LE audio format. Compile-tested only. Cc: stable@vger.kernel.org Fixes: 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250222225700.539673-2-thorsten.blum@linux.dev Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03ASoC: codecs: wsa884x: report temps to hwmon in millidegree of CelsiusAlexey Klimov
Temperatures are reported in units of Celsius however hwmon expects values to be in millidegree of Celsius. Userspace tools observe values close to zero and report it as "Not available" or incorrect values like 0C or 1C. Add a simple conversion to fix that. Before the change: wsa884x-virtual-0 Adapter: Virtual device temp1: +0.0°C -- wsa884x-virtual-0 Adapter: Virtual device temp1: +0.0°C Also reported as N/A before first amplifier power on. After this change and initial wsa884x power on: wsa884x-virtual-0 Adapter: Virtual device temp1: +39.0°C -- wsa884x-virtual-0 Adapter: Virtual device temp1: +37.0°C Tested on sm8550 only. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Link: https://patch.msgid.link/20250221044024.1207921-1-alexey.klimov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03ASoC: Intel: sof_sdw: Fix unlikely uninitialized variable use in ↵Peter Ujfalusi
create_sdw_dailinks() Initialize current_be_id to 0 to handle the unlikely case when there are no devices connected to a DAI. In this case create_sdw_dailink() would return without touching the passed pointer to current_be_id. Found by gcc -fanalyzer Fixes: 59bf457d8055 ("ASoC: intel: sof_sdw: Factor out SoundWire DAI creation") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://patch.msgid.link/20250303065552.78328-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03netfilter: nft_ct: Use __refcount_inc() for per-CPU nft_ct_pcpu_template.Sebastian Andrzej Siewior
nft_ct_pcpu_template is a per-CPU variable and relies on disabled BH for its locking. The refcounter is read and if its value is set to one then the refcounter is incremented and variable is used - otherwise it is already in use and left untouched. Without per-CPU locking in local_bh_disable() on PREEMPT_RT the read-then-increment operation is not atomic and therefore racy. This can be avoided by using unconditionally __refcount_inc() which will increment counter and return the old value as an atomic operation. In case the returned counter is not one, the variable is in use and we need to decrement counter. Otherwise we can use it. Use __refcount_inc() instead of read and a conditional increment. Fixes: edee4f1e9245 ("netfilter: nft_ct: add zone id set support") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-03-03ALSA: usx2y: validate nrpacks module parameter on probeMurad Masimov
The module parameter defines number of iso packets per one URB. User is allowed to set any value to the parameter of type int, which can lead to various kinds of weird and incorrect behavior like integer overflows, truncations, etc. Number of packets should be a small non-negative number. Since this parameter is read-only, its value can be validated on driver probe. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Link: https://patch.msgid.link/20250303100413.835-1-m.masimov@mt-integration.ru Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-03-03platform/x86/intel/vsec: Add Diamond Rapids supportDavid E. Box
Add PCI ID for the Diamond Rapids Platforms Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20250226214728.1256747-1-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-03platform/x86: thinkpad_acpi: Add battery quirk for ThinkPad X131eMingcong Bai
Based on the dmesg messages from the original reporter: [ 4.964073] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error [ 4.964083] thinkpad_acpi: Error probing battery 2 Lenovo ThinkPad X131e also needs this battery quirk. Reported-by: Fan Yang <804284660@qq.com> Tested-by: Fan Yang <804284660@qq.com> Co-developed-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Mingcong Bai <jeffbai@aosc.io> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250221164825.77315-1-jeffbai@aosc.io Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-03platform/x86: intel-hid: fix volume buttons on Microsoft Surface Go 4 tabletDmitry Panchenko
Volume buttons on Microsoft Surface Go 4 tablet didn't send any events. Add Surface Go 4 DMI match to button_array_table to fix this. Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20250220154016.3620917-1-dmitry@d-systems.ee Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-03drm/imagination: Fix timestamps in firmware tracesAlessio Belle
When firmware traces are enabled, the firmware dumps 48-bit timestamps for each trace as two 32-bit values, highest 32 bits (of which only 16 useful) first. The driver was reassembling them the other way round i.e. interpreting the first value in memory as the lowest 32 bits, and the second value as the highest 32 bits (then truncated to 16 bits). Due to this, firmware trace dumps showed very large timestamps even for traces recorded shortly after GPU boot. The timestamps in these dumps would also sometimes jump backwards because of the truncation. Example trace dumped after loading the powervr module and enabling firmware traces, where each line is commented with the timestamp value in hexadecimal to better show both issues: [93540092739584] : Host Sync Partition marker: 1 // 0x551300000000 [28419798597632] : GPU units deinit // 0x19d900000000 [28548647616512] : GPU deinit // 0x19f700000000 Update logic to reassemble the timestamps halves in the correct order. Fixes: cb56cd610866 ("drm/imagination: Add firmware trace to debugfs") Signed-off-by: Alessio Belle <alessio.belle@imgtec.com> Reviewed-by: Matt Coster <matt.coster@imgtec.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250221-fix-fw-trace-timestamps-v1-1-dba4aeb030ca@imgtec.com Signed-off-by: Matt Coster <matt.coster@imgtec.com>
2025-03-03drm/imagination: only init job done fences onceBrendan King
Ensure job done fences are only initialised once. This fixes a memory manager not clean warning from drm_mm_takedown on module unload. Cc: stable@vger.kernel.org Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling") Signed-off-by: Brendan King <brendan.king@imgtec.com> Reviewed-by: Matt Coster <matt.coster@imgtec.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250226-init-done-fences-once-v2-1-c1b2f556b329@imgtec.com Signed-off-by: Matt Coster <matt.coster@imgtec.com>
2025-03-03spi: microchip-core: prevent RX overflows when transmit size > FIFO sizeConor Dooley
When the size of a transfer exceeds the size of the FIFO (32 bytes), RX overflows will be generated and receive data will be corrupted and warnings will be produced. For example, here's an error generated by a transfer of 36 bytes: spi_master spi0: mchp_corespi_interrupt: RX OVERFLOW: rxlen: 4, txlen: 0 The driver is currently split between handling receiving in the interrupt handler, and sending outside of it. Move all handling out of the interrupt handling, and explicitly link the number of bytes read of of the RX FIFO to the number written into the TX one. This both resolves the overflow problems as well as simplifying the flow of the driver. CC: stable@vger.kernel.org Fixes: 9ac8d17694b6 ("spi: add support for microchip fpga spi controllers") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20250303-veal-snooper-712c1dfad336@wendy Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-03drm/imagination: Hold drm_gem_gpuva lock for unmapBrendan King
Avoid a warning from drm_gem_gpuva_assert_lock_held in drm_gpuva_unlink. The Imagination driver uses the GEM object reservation lock to protect the gpuva list, but the GEM object was not always known in the code paths that ended up calling drm_gpuva_unlink. When the GEM object isn't known, it is found by calling drm_gpuva_find to lookup the object associated with a given virtual address range, or by calling drm_gpuva_find_first when removing all mappings. Cc: stable@vger.kernel.org Fixes: 4bc736f890ce ("drm/imagination: vm: make use of GPUVM's drm_exec helper") Signed-off-by: Brendan King <brendan.king@imgtec.com> Reviewed-by: Matt Coster <matt.coster@imgtec.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250226-hold-drm_gem_gpuva-lock-for-unmap-v2-1-3fdacded227f@imgtec.com Signed-off-by: Matt Coster <matt.coster@imgtec.com>
2025-03-03drm/imagination: avoid deadlock on fence releaseBrendan King
Do scheduler queue fence release processing on a workqueue, rather than in the release function itself. Fixes deadlock issues such as the following: [ 607.400437] ============================================ [ 607.405755] WARNING: possible recursive locking detected [ 607.415500] -------------------------------------------- [ 607.420817] weston:zfq0/24149 is trying to acquire lock: [ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr] [ 607.436728] but task is already holding lock: [ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554 [ 607.451727] other info that might help us debug this: [ 607.458245] Possible unsafe locking scenario: [ 607.464155] CPU0 [ 607.466601] ---- [ 607.469044] lock(reservation_ww_class_mutex); [ 607.473584] lock(reservation_ww_class_mutex); [ 607.478114] *** DEADLOCK *** Cc: stable@vger.kernel.org Fixes: eaf01ee5ba28 ("drm/imagination: Implement job submission and scheduling") Signed-off-by: Brendan King <brendan.king@imgtec.com> Reviewed-by: Matt Coster <matt.coster@imgtec.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250226-fence-release-deadlock-v2-1-6fed2fc1fe88@imgtec.com Signed-off-by: Matt Coster <matt.coster@imgtec.com>
2025-03-03x86/speculation: Add a conditional CS prefix to CALL_NOSPECPawan Gupta
Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To support this mitigation compilers add a CS prefix with -mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to be added manually. CS prefix is already being added to indirect branches in asm files, but not in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There is no JMP_NOSPEC for inline asm. Reported-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com
2025-03-03x86/speculation: Simplify and make CALL_NOSPEC consistentPawan Gupta
CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly indirect branches. At compile time the macro defaults to indirect branch, and at runtime those can be patched to thunk based mitigations. This approach is opposite of what is done for the rest of the kernel, where the compile time default is to replace indirect calls with retpoline thunk calls. Make CALL_NOSPEC consistent with the rest of the kernel, default to retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is enabled. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com
2025-03-03platform/x86/amd/pmf: Initialize and clean up `cb_mutex`Mario Limonciello
`cb_mutex` was introduced in commit 9e0894d07072e ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA") to prevent conccurrent access for BIOS inputs. It however isn't initialized and so on use it may lead to a NULL pointer dereference. Add code to initialize on probe and clean up on destroy. Reported-by: Yijun Shen <Yijun.Shen@dell.com> Cc: Richard Gong <richgong@amd.com> Fixes: 9e0894d07072e ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-By: Yijun Shen <Yijun_Shen@Dell.com> Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20250227170308.435862-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-03-03usb: hub: lack of clearing xHC resourcesPawel Laszczak
The xHC resources allocated for USB devices are not released in correct order after resuming in case when while suspend device was reconnected. This issue has been detected during the fallowing scenario: - connect hub HS to root port - connect LS/FS device to hub port - wait for enumeration to finish - force host to suspend - reconnect hub attached to root port - wake host For this scenario during enumeration of USB LS/FS device the Cadence xHC reports completion error code for xHC commands because the xHC resources used for devices has not been properly released. XHCI specification doesn't mention that device can be reset in any order so, we should not treat this issue as Cadence xHC controller bug. Similar as during disconnecting in this case the device resources should be cleared starting form the last usb device in tree toward the root hub. To fix this issue usbcore driver should call hcd->driver->reset_device for all USB devices connected to hub which was reconnected while suspending. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03usb: renesas_usbhs: Flush the notify_hotplug_workClaudiu Beznea
When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable. Fixes: bc57381e6347 ("usb: renesas_usbhs: use delayed_work instead of work_struct") Cc: stable <stable@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03usb: renesas_usbhs: Use devm_usb_get_phy()Claudiu Beznea
The gpriv->transceiver is retrieved in probe() through usb_get_phy() but never released. Use devm_usb_get_phy() to handle this scenario. This issue was identified through code investigation. No issue was found without this change. Fixes: b5a2875605ca ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS") Cc: stable <stable@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03usb: renesas_usbhs: Call clk_put()Claudiu Beznea
Clocks acquired with of_clk_get() need to be freed with clk_put(). Call clk_put() on priv->clks[0] on error path. Fixes: 3df0e240caba ("usb: renesas_usbhs: Add multiple clocks management") Cc: stable <stable@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20250225110248.870417-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03usb: dwc3: gadget: Prevent irq storm when TH re-executesBadhri Jagan Sridharan
While commit d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") makes sure that top half(TH) does not end up overwriting the cached events before processing them when the TH gets invoked more than one time, returning IRQ_HANDLED results in occasional irq storm where the TH hogs the CPU. The irq storm can be prevented by the flag before event handler busy is cleared. Default enable interrupt moderation in all versions which support them. ftrace event stub during dwc3 irq storm: irq/504_dwc3-1111 ( 1111) [000] .... 70.000866: irq_handler_exit: irq=14 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000872: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000874: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000881: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000883: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000889: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000892: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000898: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000901: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000907: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000909: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000915: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000918: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000924: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000927: irq_handler_exit: irq=504 ret=handled irq/504_dwc3-1111 ( 1111) [000] .... 70.000933: irq_handler_entry: irq=504 name=dwc3 irq/504_dwc3-1111 ( 1111) [000] .... 70.000935: irq_handler_exit: irq=504 ret=handled .... Cc: stable <stable@kernel.org> Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250216223003.3568039-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03usb: gadget: Check bmAttributes only if configuration is validPrashanth K
If the USB configuration is not valid, then avoid checking for bmAttributes to prevent null pointer deference. Cc: stable <stable@kernel.org> Fixes: 40e89ff5750f ("usb: gadget: Set self-powered based on MaxPower and bmAttributes") Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250224085604.417327-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-03xhci: Restrict USB4 tunnel detection for USB3 devices to Intel hostsMarc Zyngier
When adding support for USB3-over-USB4 tunnelling detection, a check for an Intel-specific capability was added. This capability, which goes by ID 206, is used without any check that we are actually dealing with an Intel host. As it turns out, the Cadence XHCI controller *also* exposes an extended capability numbered 206 (for unknown purposes), but of course doesn't have the Intel-specific registers that the tunnelling code is trying to access. Fun follows. The core of the problems is that the tunnelling code blindly uses vendor-specific capabilities without any check (the Intel-provided documentation I have at hand indicates that 192-255 are indeed vendor-specific). Restrict the detection code to Intel HW for real, preventing any further explosion on my (non-Intel) HW. Cc: stable <stable@kernel.org> Fixes: 948ce83fbb7df ("xhci: Add USB4 tunnel detection for USB3 devices on Intel hosts") Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250227194529.2288718-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-12 13:03:20 +0000