summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-02-03ARM: 8299/1: mm: ensure local active ASID is marked as allocated on rolloverWill Deacon
Commit e1a5848e3398 ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") removed the use of the reserved TTBR0 value for LPAE systems, since the ASID is held in the TTBR and can be updated atomicly with the pgd of the next mm. Unfortunately, this patch forgot to update flush_context, which deliberately avoids marking the local active ASID as allocated, since we used to switch via ASID zero and didn't need to allocate the ASID of the previous mm. The side-effect of this is that we can allocate the same ASID to the next mm and, between flushing the local TLB and updating TTBR0, we can perform speculative TLB fills for userspace nG mappings using the page table of the previous mm. The consequence of this is that the next mm can erroneously hit some mappings of the previous mm. Note that this was made significantly harder to hit by a391263cd84e ("ARM: 8203/1: mm: try to re-use old ASID assignments following a rollover") but is still theoretically possible. This patch fixes the problem by removing the code from flush_context that forces the allocated ASID to zero for the local CPU. Many thanks to the Broadcom guys for tracking this one down. Fixes: e1a5848e3398 ("ARM: 7924/1: mm: don't bother with reserved ttbr0 when running with LPAE") Cc: <stable@vger.kernel.org> # v3.14+ Reported-by: Raymond Ngun <rngun@broadcom.com> Tested-by: Raymond Ngun <rngun@broadcom.com> Reviewed-by: Gregory Fong <gregory.0xf0@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-02-03gpio: pxa: add PXA1928 gpio type supportRob Herring
Add support for PXA1928 GPIOs. The PXA1928 adds a 6th bank from previous generations. Signed-off-by: Jing Xiang <jxiang@marvell.com> Signed-off-by: Xiangzhan Meng <mengxzh@marvell.com> [robh: ported to 3.19 from vendor kernel] Signed-off-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03dt/bindings: gpio: add compatible string for marvell,pxa1928-gpioRob Herring
Add a new compatible string for PXA1928 GPIO controller. The IP block is same as prior chips with a 6th bank added. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03gpio: pxa: remove mach IRQ includesRob Herring
In preparation to enable ARCH_MMP on ARM64, the include of mach/irqs.h must be eliminated. mach/irqs.h was being included for IRQ_GPIO{0,1}, but these IRQs are always passed in as resources now. We can use irq0 and irq1 and get rid of IRQ_GPIOx. Get rid of the ifdef in the process as it is no longer needed. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03gpio: max732x: use an inline function for container castLinus Walleij
Cast the struct gpio_chip into a max732x_chip using an inline macro and move the assignment to the variable declaration to save lines and simplify things. Cc: Semen Protsenko <semen.protsenko@globallogic.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-03spi: imx: use pio mode for i.mx6dlRobin Gong
For TKT238285 hardware issue which may cause txfifo store data twice can only be caught on i.mx6dl, we use pio mode instead of DMA mode on i.mx6dl. Fixes: f62caccd12c17e4 (spi: spi-imx: add DMA support) Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-02-03ASoC: tlv320aic3x: Add support for tlv320aic3104Jyri Sarha
Disables GPIO support and LINE2 input and renames Mic3 input to Mic2, if tlv320aic3104 mode is seleced. Devicetree binding document is updated accordingly. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-03ata: libahci: Use of_platform_device_create only if supportedGuenter Roeck
of_platform_device_create does not exist if OF_ADDRESS is not configured, so limit its use accordingly. Without this fix, the sparc64:allmodconfig build fails with ERROR: "of_platform_device_create" [drivers/ata/libahci_platform.ko] undefined! Fixes: c7d7ddee7e24 ("ata: libahci: Allow using multiple regulators") Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03sata_mv: Delete unnecessary checks before the function call "phy_power_off"Markus Elfring
The phy_power_off() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03ata: Delete unnecessary checks before the function call "pci_dev_put"Markus Elfring
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03floppy: Avoid manual call of device_create_file()Takashi Iwai
Use the static attribute groups assigned to the device instead of calling device_create_file() after the device registration. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-03Merge tag 'pr-20150201-x86-entry' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux into x86/asm Pull "x86: Entry cleanups and a bugfix for 3.20" from Andy Lutomirski: " This fixes a bug in the RCU code I added in ist_enter. It also includes the sysret stuff discussed here: http://lkml.kernel.org/g/cover.1421453410.git.luto%40amacapital.net " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-03Merge tag 'pr-20150201-x86-vdso' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux into x86/asm Pull VDSO fix fro Andy Lutomirski: "x86, vdso: One trivial last-minute VDSO build improvement Andrey noticed that the VDSO build wasn't cleaning itself up. This one-liner fixes it." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-03Merge tag 'v3.19-rc7' into x86/asm, to refresh the branch before pulling in ↵Ingo Molnar
new changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-03sched/wait: Remove might_sleep() from wait_event_cmd()Mikulas Patocka
The patch e22b886a8a43 ("sched/wait: Add might_sleep() checks") introduced a bug in the raid5 subsystem. The function raid5_quiesce() (and resize_stripes()) uses the 'cmd' part to release and acquire a spinlock (so we call the sleep primitives in atomic context), and therefore we cannot do the might_sleep() check. Remove it. Fixes: e22b886a8a43 ("sched/wait: Add might_sleep() checks") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1502020935580.13510@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-03ALSA: line6: fixup of line6_start_timer argument typeNicholas Mc Guire
line6_start_timer passes an unsigned int as argument to be used in mod_timer which is then used by mod_timer as unsigned long, this just fixes up the argument type. This change helps make static code checkers happy. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03ALSA: line6: use msecs_to_jiffies for conversionNicholas Mc Guire
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-03Bluetooth: Fix potential NULL dereferenceJohan Hedberg
The bnep_get_device function may be triggered by an ioctl just after a connection has gone down. In such a case the respective L2CAP chan->conn pointer will get set to NULL (by l2cap_chan_del). This patch adds a missing NULL check for this case in the bnep_get_device() function. Reported-by: Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-02-03Bluetooth: btusb: Add support for Lite-On (04ca) Broadcom based, BCM43142Matej Dubovy
Please add support for sub BT chip on the combo card Broadcom 43142A0 (in Lenovo E145), 04ca:2007 /sys/kernel/debug/usb/devices T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=2007 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM43142A0 S: SerialNumber=28E347EC73BD C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Firmware for 04ca:2007 can be extracted from the latest Lenovo E145 Bluetooth driver for Windows (driver is however described as BCM20702 but contains also firwmare for BCM43142). Search for BCM43142A0_001.001.011.0122.0153.hex within hex files, then it must be converted using hex2hcd utility. Rename file to BCM43142A0-04ca-2007.hcd, then move to /lib/firmware/brcm/. Signed-off-by: Matej Dubovy <matej.dubovy@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2015-02-03iwlwifi: mvm: reduce quota thresholdJohannes Berg
The quota threshold should be reduced to 4 to update the firmware more frequently. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-02xen-netback: stop the guest rx thread after a fatal errorDavid Vrabel
After commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d (xen-netback: disable rogue vif in kthread context), a fatal (protocol) error would leave the guest Rx thread spinning, wasting CPU time. Commit ecf08d2dbb96d5a4b4bcc53a39e8d29cc8fef02e (xen-netback: reintroduce guest Rx stall detection) made this even worse by removing a cond_resched() from this path. Since a fatal error is non-recoverable, just allow the guest Rx thread to exit. This requires taking additional refs to the task so the thread exiting early is handled safely. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reported-by: Julien Grall <julien.grall@linaro.org> Tested-by: Julien Grall <julien.grall@linaro.org> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net/mlx4_core: Fix kernel Oops (mem corruption) when working with more than ↵Jack Morgenstein
80 VFs Commit de966c592802 (net/mlx4_core: Support more than 64 VFs) was meant to allow up to 126 VFs. However, due to leaving MLX4_MFUNC_MAX too low, using more than 80 VFs resulted in memory corruptions (and Oopses) when more than 80 VFs were requested. In addition, the number of slaves was left too high. This commit fixes these issues. Fixes: de966c592802 ("net/mlx4_core: Support more than 64 VFs") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02isdn: off by one in connect_res()Dan Carpenter
The bug here is that we use "Reject" as the index into the cau_t[] array in the else path. Since the cau_t[] has 9 elements if Reject == 9 then we are reading beyond the end of the array. My understanding of the code is that it's saying that if Reject is 1 or too high then that's invalid and we should hang up. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Validate hooks for nf_tables NAT expressions, otherwise users can crash the kernel when using them from the wrong hook. We already got one user trapped on this when configuring masquerading. 2) Fix a BUG splat in nf_tables with CONFIG_DEBUG_PREEMPT=y. Reported by Andreas Schultz. 3) Avoid unnecessary reroute of traffic in the local input path in IPVS that triggers a crash in in xfrm. Reported by Florian Wiessner and fixes by Julian Anastasov. 4) Fix memory and module refcount leak from the error path of nf_tables_newchain(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net: sctp: Deletion of an unnecessary check before the function call "kfree"Markus Elfring
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-By: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02Merge branch 'udpv6_lockless_send'David S. Miller
Vladislav Yasevich says: ==================== ipv6: Add lockless UDP send path This series introduces a lockless UDPv6 send path similar to what Herbert Xu did for IPv4 a while ago. There are some difference from IPv4. IPv6 caching for flow label is a bit different, as well as it requires another cork cork structure that holds the IPv6 ancillary data. Please take a look. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: Allow for partial checksums on non-ufo packetsVlad Yasevich
Currntly, if we are not doing UFO on the packet, all UDP packets will start with CHECKSUM_NONE and thus perform full checksum computations in software even if device support IPv6 checksum offloading. Let's start start with CHECKSUM_PARTIAL if the device supports it and we are sending only a single packet at or below mtu size. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02udpv6: Add lockless sendmsg() supportVlad Yasevich
This commit adds the same functionaliy to IPv6 that commit 903ab86d195cca295379699299c5fc10beba31c7 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Tue Mar 1 02:36:48 2011 +0000 udp: Add lockless transmit path added to IPv4. UDP transmit path can now run without a socket lock, thus allowing multiple threads to send to a single socket more efficiently. This is only used when corking/MSG_MORE is not used. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: Introduce udpv6_send_skb()Vlad Yasevich
Now that we can individually construct IPv6 skbs to send, add a udpv6_send_skb() function to populate the udp header and send the skb. This allows udp_v6_push_pending_frames() to re-use this function as well as enables us to add lockless sendmsg() support. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: introduce ipv6_make_skbVlad Yasevich
This commit is very similar to commit 1c32c5ad6fac8cee1a77449f5abf211e911ff830 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Tue Mar 1 02:36:47 2011 +0000 inet: Add ip_make_skb and ip_finish_skb It adds IPv6 version of the helpers ip6_make_skb and ip6_finish_skb. The job of ip6_make_skb is to collect messages into an ipv6 packet and poplulate ipv6 eader. The job of ip6_finish_skb is to transmit the generated skb. Together they replicated the job of ip6_push_pending_frames() while also provide the capability to be called independently. This will be needed to add lockless UDP sendmsg support. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: Append sending data to arbitrary queueVlad Yasevich
Add the ability to append data to arbitrary queue. This will be needed later to implement lockless UDP sends. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02ipv6: pull cork initialization into its own function.Vlad Yasevich
Pull IPv6 cork initialization into its own function that can be re-used. IPv6 specific cork data did not have an explicit data structure. This patch creats eone so that just ipv6 cork data can be as arguemts. Also, since IPv6 tries to save the flow label into inet_cork_full tructure, pass the full cork. Adjust ip6_cork_release() to take cork data structures. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02cxgb4 : Improve IEEE DCBx support, other minor open-lldp fixesAnish Bhatt
* Add support for IEEE ets & pfc api. * Fix bug that resulted in incorrect bandwidth percentage being returned for CEE peers * Convert pfc enabled info from firmware format to what dcbnl expects before returning Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net/tulip: don't warn about unknown ARM architectureArnd Bergmann
ARM has 32-byte cache lines, which according to the comment in the init registers function seems to work best with the default value of 0x4800 that is also used on sparc and parisc. This adds ARM to the same list, to use that default but no longer warn about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net: hip04: add missing MODULE_LICENSEArnd Bergmann
The hip04 ethernet driver causes a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/hisilicon/hip04_eth.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02Documentation: Update netlink_mmap.txtRichard Weinberger
Update netlink_mmap.txt wrt. commit 4682a0358639b29cf ("netlink: Always copy on mmap TX."). Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net: dctcp: loosen requirement to assert ECT(0) during 3WHSFlorian Westphal
One deployment requirement of DCTCP is to be able to run in a DC setting along with TCP traffic. As Glenn Judd's NSDI'15 paper "Attaining the Promise and Avoiding the Pitfalls of TCP in the Datacenter" [1] (tba) explains, one way to solve this on switch side is to split DCTCP and TCP traffic in two queues per switch port based on the DSCP: one queue soley intended for DCTCP traffic and one for non-DCTCP traffic. For the DCTCP queue, there's the marking threshold K as explained in commit e3118e8359bb ("net: tcp: add DCTCP congestion control algorithm") for RED marking ECT(0) packets with CE. For the non-DCTCP queue, there's f.e. a classic tail drop queue. As already explained in e3118e8359bb, running DCTCP at scale when not marking SYN/SYN-ACK packets with ECT(0) has severe consequences as for non-ECT(0) packets, traversing the RED marking DCTCP queue will result in a severe reduction of connection probability. This is due to the DCTCP queue being dominated by ECT(0) traffic and switches handle non-ECT traffic in the RED marking queue after passing K as drops, where K is usually a low watermark in order to leave enough tailroom for bursts. Splitting DCTCP traffic among several queues (ECN and non-ECN queue) is being considered a terrible idea in the network community as it splits single flows across multiple network paths. Therefore, commit e3118e8359bb implements this on Linux as ECT(0) marked traffic, as we argue that marking all packets of a DCTCP flow is the only viable solution and also doesn't speak against the draft. However, recently, a DCTCP implementation for FreeBSD hit also their mainline kernel [2]. In order to let them play well together with Linux' DCTCP, we would need to loosen the requirement that ECT(0) has to be asserted during the 3WHS as not implemented in FreeBSD. This simplifies the ECN test and lets DCTCP work together with FreeBSD. Joint work with Daniel Borkmann. [1] https://www.usenix.org/conference/nsdi15/technical-sessions/presentation/judd [2] https://github.com/freebsd/freebsd/commit/8ad879445281027858a7fa706d13e458095b595f Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02Merge branch 'net-timestamp'David S. Miller
Willem de Bruijn says: ==================== net-timestamp: blinding Changes (v2 -> v3) - rebase only: v2 did not make it to patchwork / netdev (v1 -> v2) - fix capability check in patch 2 this could be moved into net/core/sock.c as sk_capable_nouser() (rfc -> v1) - dropped patch 4: timestamp batching due to complexity, as discussed - dropped patch 5: default mode because it does not really cover all use cases, as discussed - added documentation - minor fix, see patch 2 Two issues were raised during recent timestamping discussions: 1. looping full packets on the error queue exposes packet headers 2. TCP timestamping with retransmissions generates many timestamps This RFC patchset is an attempt at addressing both without breaking legacy behavior. Patch 1 reintroduces the "no payload" timestamp option, which loops timestamps onto an empty skb. This reduces the pressure on SO_RCVBUF from looping many timestamps. It does not reduce the number of recv() calls needed to process them. The timestamp cookie mechanism developed in http://patchwork.ozlabs.org/patch/427213/ did, but this is considerably simpler. Patch 2 then gives administrators the power to block all timestamp requests that contain data by unprivileged users. I proposed this earlier as a backward compatible workaround in the discussion of net-timestamp: pull headers for SOCK_STREAM http://patchwork.ozlabs.org/patch/414810/ Patch 3 only updates the txtimestamp example to test this option. Verified that with option '-n', length is zero in all cases and option '-I' (PKTINFO) stops working. ==================== Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net-timestamp: no-payload option in txtimestamp testWillem de Bruijn
Demonstrate how SOF_TIMESTAMPING_OPT_TSONLY can be used and test the implementation. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net-timestamp: no-payload only sysctlWillem de Bruijn
Tx timestamps are looped onto the error queue on top of an skb. This mechanism leaks packet headers to processes unless the no-payload options SOF_TIMESTAMPING_OPT_TSONLY is set. Add a sysctl that optionally drops looped timestamp with data. This only affects processes without CAP_NET_RAW. The policy is checked when timestamps are generated in the stack. It is possible for timestamps with data to be reported after the sysctl is set, if these were queued internally earlier. No vulnerability is immediately known that exploits knowledge gleaned from packet headers, but it may still be preferable to allow administrators to lock down this path at the cost of possible breakage of legacy applications. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes (v1 -> v2) - test socket CAP_NET_RAW instead of capable(CAP_NET_RAW) (rfc -> v1) - document the sysctl in Documentation/sysctl/net.txt - fix access control race: read .._OPT_TSONLY only once, use same value for permission check and skb generation. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02net-timestamp: no-payload optionWillem de Bruijn
Add timestamping option SOF_TIMESTAMPING_OPT_TSONLY. For transmit timestamps, this loops timestamps on top of empty packets. Doing so reduces the pressure on SO_RCVBUF. Payload inspection and cmsg reception (aside from timestamps) are no longer possible. This works together with a follow on patch that allows administrators to only allow tx timestamping if it does not loop payload or metadata. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes (rfc -> v1) - add documentation - remove unnecessary skb->len test (thanks to Richard Cochran) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02sunvnet: set queue mapping when doing packet copiesDavid L Stevens
This patch fixes a bug where vnet_skb_shape() didn't set the already-selected queue mapping when a packet copy was required. This results in using the wrong queue index for stops/starts, hung tx queues and watchdog timeouts under heavy load. Signed-off-by: David L Stevens <david.stevens@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02qlge: Fix qlge_update_hw_vlan_features to handle if interface is downMarcelo Leitner
Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8d352 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil <harish.patil@qlogic.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03Merge tag 'drm-amdkfd-fixes-2015-02-02' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-fixes Three small fixes that came up during last week, nothing scary: - Accidently incremented a counter instead of decrementing it (copy-paste error) - Module parameter of max num of queues must be at least 1 and not 0 - Don't do BUG() as a result from wrong user input * tag 'drm-amdkfd-fixes-2015-02-02' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Don't create BUG due to incorrect user parameter drm/amdkfd: max num of queues can't be 0 drm/amdkfd: Fix bug in accounting of queues
2015-02-03Merge branch 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes One last round of fixes for radeon for 3.19: - fix some fallout from the reservation object integration on the test/benchmark options - fix a crash in the gpu vm code if gfx init fails - fix a pll issue that leads to a blank screen on older IGP parts * 'drm-fixes-3.19' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix the crash in test functions drm/radeon: fix the crash in benchmark functions drm/radeon: properly set vm fragment size for TN/RL drm/radeon: don't init gpuvm if accel is disabled (v3) drm/radeon: fix PLLs on RS880 and older v2
2015-02-03cpufreq: Set cpufreq_cpu_data to NULL before putting kobjectViresh Kumar
In __cpufreq_remove_dev_finish(), per-cpu 'cpufreq_cpu_data' needs to be cleared before calling kobject_put(&policy->kobj) and under cpufreq_driver_lock. Otherwise, if someone else calls cpufreq_cpu_get() in parallel with it, they can obtain a non-NULL policy from that after kobject_put(&policy->kobj) was executed. Consider this case: Thread A Thread B cpufreq_cpu_get() acquire cpufreq_driver_lock read-per-cpu cpufreq_cpu_data kobject_put(&policy->kobj); kobject_get(&policy->kobj); ... per_cpu(&cpufreq_cpu_data, cpu) = NULL And this will result in a warning like this one: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 4 at include/linux/kref.h:47 kobject_get+0x41/0x50() Modules linked in: acpi_cpufreq(+) nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sd_mod ixgbe igb mdio ahci hwmon ... Call Trace: [<ffffffff81661b14>] dump_stack+0x46/0x58 [<ffffffff81072b61>] warn_slowpath_common+0x81/0xa0 [<ffffffff81072c7a>] warn_slowpath_null+0x1a/0x20 [<ffffffff812e16d1>] kobject_get+0x41/0x50 [<ffffffff815262a5>] cpufreq_cpu_get+0x75/0xc0 [<ffffffff81527c3e>] cpufreq_update_policy+0x2e/0x1f0 [<ffffffff810b8cb2>] ? up+0x32/0x50 [<ffffffff81381aa9>] ? acpi_ns_get_node+0xcb/0xf2 [<ffffffff81381efd>] ? acpi_evaluate_object+0x22c/0x252 [<ffffffff813824f6>] ? acpi_get_handle+0x95/0xc0 [<ffffffff81360967>] ? acpi_has_method+0x25/0x40 [<ffffffff81391e08>] acpi_processor_ppc_has_changed+0x77/0x82 [<ffffffff81089566>] ? move_linked_works+0x66/0x90 [<ffffffff8138e8ed>] acpi_processor_notify+0x58/0xe7 [<ffffffff8137410c>] acpi_ev_notify_dispatch+0x44/0x5c [<ffffffff8135f293>] acpi_os_execute_deferred+0x15/0x22 [<ffffffff8108c910>] process_one_work+0x160/0x410 [<ffffffff8108d05b>] worker_thread+0x11b/0x520 [<ffffffff8108cf40>] ? rescuer_thread+0x380/0x380 [<ffffffff81092421>] kthread+0xe1/0x100 [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0 [<ffffffff81669ebc>] ret_from_fork+0x7c/0xb0 [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0 ---[ end trace 89e66eb9795efdf7 ]--- The actual code flow is as follows: Thread A: Workqueue: kacpi_notify acpi_processor_notify() acpi_processor_ppc_has_changed() cpufreq_update_policy() cpufreq_cpu_get() kobject_get() Thread B: xenbus_thread() xenbus_thread() msg->u.watch.handle->callback() handle_vcpu_hotplug_event() vcpu_hotplug() cpu_down() __cpu_notify(CPU_POST_DEAD..) cpufreq_cpu_callback() __cpufreq_remove_dev_finish() cpufreq_policy_put_kobj() kobject_put() cpufreq_cpu_get() gets the policy from per-cpu variable cpufreq_cpu_data under cpufreq_driver_lock, and once it gets a valid policy it expects it to not be freed until cpufreq_cpu_put() is called. But the race happens when another thread puts the kobject first and updates cpufreq_cpu_data before or later. And so the first thread gets a valid policy structure and before it does kobject_get() on it, the second one has already done kobject_put(). Fix this by setting cpufreq_cpu_data to NULL before putting the kobject and that too under locks. Reported-by: Ethan Zhao <ethan.zhao@oracle.com> Reported-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.12+ <stable@vger.kernel.org> # 3.12+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-02ACPI / cpuidle: Drop flags.bm_check tests from acpi_idle_enter_bm()Rafael J. Wysocki
Since acpi_idle_enter_bm() is only used if flags.bm_check is set for the given acpi_processor object, it doesn't make sense to check that flag in there. For this reason, drop flags.bm_check tests (and some code depending on them) from acpi_idle_enter_bm(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-02ACPI / cpuidle: Clean up white space in a switch statementRafael J. Wysocki
White space in the switch statement in acpi_processor_setup_cpuidle_states() does not adhere to the kernel coding style and that makes the code difficult to read. Clean that up. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-02ACPI / cpuidle: Drop irrelevant comment from acpi_idle_enter_simple()Rafael J. Wysocki
The comment about bus master disable in acpi_idle_enter_simple() is irrelevant, because the function doesn't disable bus mastering, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-02ACPI / cpuidle: Clean up fallback to C1 checksRafael J. Wysocki
acpi_idle_enter_simple() and acpi_idle_enter_bm() both check if C2/C3 type entry is supported on MP in the same way, so move those checks to a separate function and call it from both places (and it doesn't need to check if the state type is not C1, because the functions in question won't be called otherwise). While at it, use IS_ENABLED() for the CONFIG_HOTPLUG_CPU check. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 21:54:04 +0000