summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-03regulator: max1586: zero-initialize regulator match table arrayJavier Martinez Canillas
The struct of_regulator_match rmatch[] is declared as a non-static local variable so the structure members are not auto-initialized. Initialize the array at declaration time to avoid the structure members values to be indeterminate and have sane defaults instead. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03[media] lirc: use kfifo_initialized() on lirc_buffer's fifoMartin Kaiser
We can use kfifo_initialized() to check if the fifo in lirc_buffer is initialized or not. There's no need to have a dedicated fifo status variable in lirc_buffer. [m.chehab@samsung.com: add the same change to lirc_zilog, to avoid breaking compilation of staging drivers] Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] media: dvb_core: replace a magic number by a macroDan Carpenter
It's better to use TS_SC instead of magic number 0xC0. [m.chehab@samsung.com: patch rebased and message rewritten, as this patch conflicted with an already applied patch] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] media: Print information on failed link validationSakari Ailus
The Media controller doesn't tell much to the user in cases such as pipeline startup failure. The link validation is the most common media graph (or in V4L2's case, format) related reason for the failure. In more complex pipelines the reason may not always be obvious to the user, so point them to look at the right direction. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-net: Fix probable mask then right shift defectsJoe Perches
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03regulator: max77693: Fix use of uninitialized regulator configKrzysztof Kozlowski
Driver allocated on stack struct regulator_config but didn't initialize it fully. Few fields (driver_data, ena_gpio) were left untouched. This lead to using random ena_gpio values as GPIOs for max77693 regulators. On occasion these values could match real GPIO numbers leading to interfering with other drivers and to unsuccessful enable/disable of regulator. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 80b022e29bfd ("regulator: max77693: Add max77693 regualtor driver.") Cc: <stable@vger.kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03[media] cxusb: TS mode setting for TT CT2-4400Olli Salonen
There is a new version of the TechnoTrend CT2-4400 USB tuner. The difference is the demodulator that is used (Si2168-B40 instead of -A30). For TT CT2-4400v2 a TS stream related parameter needs to be set, otherwise the stream becomes corrupted. The Windows driver for both CT2-4400 and CT2-4400v2 sets this as well. After this patch the driver works for both versions. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] au8522: improve lock performance with ZeeVee modulatorsRichard Vollkommer
Improves lock performance with signals from the ZeeVee family of modulators. Signed-off-by: Richard Vollkommer <linux@hauppauge.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] xc5000: add IF output level controlRichard Vollkommer
Adds control of the IF output level to the xc5000 tuner configuration structure. Increases the IF level to the demodulator to fix failure to lock and picture breakup issues (with the au8522 demodulator, in the case of the Hauppauge HVR950Q). This patch works with all XC5000 firmware versions. Signed-off-by: Richard Vollkommer <linux@hauppauge.com> Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] lirc_igorplugusb: removeSean Young
This driver has been replaced by an rc-core driver for the same hardware. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] rc: port IgorPlug-USB to rc-coreSean Young
This is a complete re-write inspired by the original lirc driver. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] m88ts2022: return the err code in its probe function when error occursnibble.max
if "chip_id" is wrong or "dev->cfg.clock_out" is invalid, the i2c model is still loaded. It will cause "kernel NULL pointer dereference" oops when the i2c model remove. returning the err code will prevent the i2c model load. Signed-off-by: Nibble Max <nibble.max@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx23885: add DVBSky S950C and T980C RC supportnibble.max
DVBSky s950ci dvb-s/s2 ci PCIe card: 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod) 2>ci controller: CIMAX SP2 or its clone. 3>PCIe bridge: CX23885 The patchs are based on the following patchs. Olli Salonen submit: https://patchwork.linuxtv.org/patch/26180/ https://patchwork.linuxtv.org/patch/26183/ https://patchwork.linuxtv.org/patch/26324/ Nibble Max submit: https://patchwork.linuxtv.org/patch/26207/ Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx23885: add DVBSky S950C dvb-s/s2 ci PCIe card support(no RC)nibble.max
DVBSky s950ci dvb-s/s2 ci PCIe card: 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod) 2>ci controller: CIMAX SP2 or its clone. 3>PCIe bridge: CX23885 The patchs are based on the following patchs. Olli Salonen submit: https://patchwork.linuxtv.org/patch/26180/ https://patchwork.linuxtv.org/patch/26183/ https://patchwork.linuxtv.org/patch/26324/ Nibble Max submit: https://patchwork.linuxtv.org/patch/26207/ Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-usb-dvbsky: add s960ci dvb-s/s2 usb ci box supportnibble.max
DVBSky s960ci dvb-s/s2 usb ci box: 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod) 2>usb controller: CY7C86013A 3>ci controller: CIMAX SP2 or its clone. Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] Update Documentation cardlistMauro Carvalho Chehab
Some new devices got added. Update cardlists. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] em28xx: add support for Leadtek VC100 USB capture deviceWitold Krecicki
Leadtek VC100 is a simple USB capture stick, similar to Yakumo Movie Mixer. Signed-off-by: Witold Krecicki <wpk+lkml@culm.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvbsky: add option to disable IR receiverOlli Salonen
Add an option to disable remote controller for DVBSky devices by specifying the disable_rc option at modprobe. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvbsky: clean loggingOlli Salonen
dev_err includes the function name in the log printout, so there is no need to include it manually. While here, fix a small grammatical error in the i2c error message. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvbsky: don't print MAC address from read_mac_addressOlli Salonen
The dvb-usb-v2 already prints out the MAC address, no need to print it out also here. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] media: earthsoft: logging neateningJoe Perches
Use dev_err instead of pt1_printk o reduce object code size o remove now unused pt1_printk macro Neaten dev_<level> uses in pt3 o add missing newlines o align arguments o remove unnecessary OOM messages as there's a generic one o typo fixes in messages Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] imon: fix other RC type protocol supportUlrich Eckhardt
With kernel 3.17 the imon remote control for device 15c2:0034 does not work anymore, which uses the OTHER protocol. Only the front panel buttons which uses the RC6 protocol are working. Adds the missing comparison for the RC_BIT_OTHER. Cc: stable@vger.kernel.org # for Kernel 3.17 Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] ir-hix5hd2 fix build warningZhangfei Gao
Change CONFIG_PM to CONFIG_PM_SLEEP to solve warning: 'hix5hd2_ir_suspend' & 'hix5hd2_ir_resume' defined but not used Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-frontends/Kconfig: better describe Toshiba TC90522ほち
Toshiba TC90522 is wrongly categorized, fix it Signed-off-by: ほち, AreMa Inc <knightrider@are.ma> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] Staging: media: lirc: cleaned up packet dump in 2 filesAmber Thrall
lirc_imon.c and lirc_sasem.c contain an incoming_packet method that is using deprecated printk's. Removed blocks replacing with single dev_info with a %*ph format instead. Signed-off-by: Amber Thrall <amber.rose.thrall@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: fix VBI supportHans Verkuil
Now works with both NTSC and PAL. Tested with CC/XDS for NTSC and teletext/WSS for PAL. The start lines were wrong, the WSS signal wasn't captured and there was no difference between NTSC and PAL w.r.t. the count[] values so NTSC returned way too many lines. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: pci_disable_device comes after free_irqHans Verkuil
Move pci_disable_device() down otherwise it will complain about an unfreed irq. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: consistently use UNSET for absent tunerHans Verkuil
Don't mix UNSET and TUNER_ABSENT: you have to pick one or the other. For this driver selecting UNSET to represent an absent tuner resulting in the fewest changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: don't allow changes while vb2_is_busyHans Verkuil
Make sure that changing the standard or format is not allowed while one or more of the video, vbi or mpeg vb2 queues are busy. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: drop mpeg_active fieldHans Verkuil
The vb2 framework knows if streaming is in progress, no need to use a separate field for that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: move width, height and field to core structHans Verkuil
The width, height and field values are core fields since both vbi, video and blackbird use the same video input. Move those fields to the correct struct. Also fix the field checks in the try_fmt functions: add V4L2_FIELD_SEQ_BT/TB support and map incorrect field values to a correct field value instead of returning an error. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: don't pollute the kernel logHans Verkuil
There is no reason to dump the sram code to the kernel log when you stop streaming. Remove those calls to cx88_sram_channel_dump. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: increase API command timeoutHans Verkuil
The timeout is way too small. Especially complicated command like CX2341X_ENC_STOP_CAPTURE takes much more time than 10 ms. Increase the timeout to 1 second, just as ivtv does (the cx88-blackbird has the same IP core for MPEG compression as ivtv). This solves a nasty issue where STOP_CAPTURE would timeout and the mailbox is left in a busy state, making it impossible to start streaming a second time without reloading the driver first. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: remove dependency on btcx-riscHans Verkuil
btcx-risc is for the bt8xx driver and other drivers shouldn't depend on it. There is no benefit to use that module just to do a pci_zalloc_consistent. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: drop cx88_free_bufferHans Verkuil
Remove this function. This makes all vb2 queues behave the same, which simplifies comparing the various vb2 queue op implementations. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: return proper errors during fw loadHans Verkuil
Don't return -1, return a proper error. Replace dprintk(0, ...) by pr_err since firmware load errors should just be reported as an error. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: fix sparse warningHans Verkuil
drivers/media/pci/cx88/cx88-blackbird.c:476:25: warning: cast to restricted __le32 Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: convert to vb2Hans Verkuil
As usual, this patch is very large due to the fact that half a vb2 conversion isn't possible. And since this affects blackbird, alsa, core, dvb, vbi and video the changes are all over. What made this more difficult was the peculiar way the risc program was setup. The driver allowed for running out of buffers in which case the DMA would stop and restart when the next buffer was queued. There was also a complicated timeout system for when buffers weren't filled. This was replaced by a much simpler scheme where there is always one buffer around and the DMA will just cycle that buffer until a new buffer is queued. In that case the previous buffer will be chained to the new buffer. An interrupt is generated at the start of the new buffer telling the driver that the previous buffer can be passed on to userspace. Much simpler and more robust. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: drop videobuf abuse in cx88-alsaHans Verkuil
The alsa driver uses videobuf low-level functions that are not available in vb2, so replace them by driver-specific functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: drop the bogus 'queue' list in dmaqueueHans Verkuil
This list is only used if the width, height and/or format of a buffer has changed, but that can never happen. Remove it and all associated code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx88: remove fmt from the buffer structHans Verkuil
This is a duplicate of dev->fmt and can be removed. As a consequence a lot of tests that check if the format has changed midstream can be removed as well: the format cannot change midstream, so this is a bogus check. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03USB: opticon: fix non-atomic allocation in write pathJohan Hovold
Write may be called from interrupt context so make sure to use GFP_ATOMIC for all allocations in write. Fixes: 0d930e51cfe6 ("USB: opticon: Add Opticon OPN2001 write support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-03USB: kobil_sct: fix non-atomic allocation in write pathJohan Hovold
Write may be called from interrupt context so make sure to use GFP_ATOMIC for all allocations in write. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-11-02thermal: exynos: fix IRQ clearing on TMU initializationBartlomiej Zolnierkiewicz
* Factor out code for clearing raised IRQs from exynos_tmu_work() to exynos_tmu_clear_irqs(). * Add a comment about documentation bugs to exynos_tmu_clear_irqs(). [ The documentation for Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly states that INTCLEAR register has a different placing of bits responsible for FALL IRQs than INTSTAT register. Exynos5420 and Exynos5440 documentation is correct (Exynos4210 doesn't support FALL IRQs at all). ] * Use exynos_tmu_clear_irqs() in exynos_tmu_initialize() instead of open-coded code trying to clear IRQs according to predefined masks. After this change exynos_tmu_initialize() just clears IRQs that are raised like it is already done in exynos_tmu_work(). As a nice side-effect the code now uses the correct offset (16 instead of 12) for bits responsible for clearing FALL IRQs in INTCLEAR register on Exynos3250, Exynos4412 and Exynos5250. * Remove no longer needed intclr_rise_[mask,shift] and intclr_fall_[mask,shift] fields from struct exynos_tmu_registers. * Remove no longer needed defines. This patch has been tested on Exynos4412 and Exynos5420 SoCs. Cc: Amit Daniel Kachhap <amit.daniel@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02thermal: fix multiple disbalanced device node countersVladimir Zapolskiy
Here on function return all temporarily used device nodes shall decrement their usage counter. The problems are found with device nodes allocated by for_each_child_of_node(), of_parse_phandle() and of_find_node_by_name(), fix all problems at once. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: devicetree@vger.kernel.org Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02thermal: rcar: Add binding docs for new R-Car Gen2 SoCsGeert Uytterhoeven
- r8a7792 (R-Car V2H) - r8a7793 (R-Car M2-N) - r8a7794 (R-Car E2) r8a7791 is now called "R-Car M2-W". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02thermal: exynos: Add support for TRIM_RELOAD feature at Exynos3250Chanwoo Choi
This patch add support for TRIM_RELOAD feature at Exynos3250. The TMu of Exynos3250 has two TRIMINFO_CON register and must need to set RELOAD bit before reading TRIMINFO register. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02thermal: exynos: Add support for many TRIMINFO_CTRL registersChanwoo Choi
This patch support many TRIMINFO_CTRL registers if specific Exynos SoC has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD' shift/mask bit operation to set RELOAD feature instead of static value. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com> Reviewed-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02thermal: samsung: Exynos5260 and Exynos5420 should not use TRIM_RELOAD flagBartlomiej Zolnierkiewicz
Currently these SoCs claim TRIM_RELOAD support but don't have triminfo_ctrl register address defined in their struct exynos_tmu_registers entries. This causes incorrect write of value "1" to data->base + 0x00 address (which happens to be TRIMINFO register). Additionally according to the documentation that I have neither Exynos5260 nor Exynos5420 support/require TRIM_RELOAD feature. Thus fix the aforementioned issue by removing TMU_SUPPORT_TRIM_RELOAD flag for both Exynos5260 and Exynos5420. Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Cc: Amit Daniel Kachhap <amit.daniel@samsung.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-02thermal: exynos: remove identical values from exynos*_tmu_registers structuresBartlomiej Zolnierkiewicz
There is no need for abstracting configuration for registers that are identical on all SoC types. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-18 08:24:54 +0000