| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One small core feature this time around but mostly driver improvements
and additions for SPI:
- Add support for controlling the idle state of MOSI, some systems
can support this and depending on the system integration may need
it to avoid glitching in some situations
- Support for polling mode in the S3C64xx driver and DMA on the
Qualcomm QSPI driver
- Support for several Allwinner SoCs, AMD Pensando Elba, Intel Mount
Evans, Renesas RZ/V2M, and ST STM32H7"
* tag 'spi-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
spi: dt-bindings: atmel,at91rm9200-spi: fix broken sam9x7 compatible
spi: dt-bindings: atmel,at91rm9200-spi: add sam9x7 compatible
spi: Add support for Renesas CSI
spi: dt-bindings: Add bindings for RZ/V2M CSI
spi: sun6i: Use the new helper to derive the xfer timeout value
spi: atmel: Prevent false timeouts on long transfers
spi: dt-bindings: stm32: do not disable spi-slave property for stm32f4-f7
spi: Create a helper to derive adaptive timeouts
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
spi: stm32: disable spi-slave property for stm32f4-f7
spi: stm32: introduction of stm32h7 SPI device mode support
spi: stm32: use dmaengine_terminate_{a}sync instead of _all
spi: stm32: renaming of spi_master into spi_controller
spi: dw: Remove misleading comment for Mount Evans SoC
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for Intel Mount Evans SoC
spi: dw: Add compatible for Intel Mount Evans SoC
spi: s3c64xx: Use dev_err_probe()
spi: s3c64xx: Use the managed spi master allocation function
spi: spl022: Probe defer is no error
spi: spi-imx: fix mixing of native and gpio chipselects for imx51/imx53/imx6 variants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This release is almost all drivers, there's some small improvements in
the core but otherwise everything is updates to drivers, mostly the
addition of new ones.
There's also a bunch of changes pulled in from the MFD subsystem as
dependencies, Rockchip and TI core MFD code that the regulator drivers
depend on.
I've also yet again managed to put a SPI commit in the regulator tree,
I don't know what it is about those two trees (this for
spi-geni-qcom).
Summary:
- Support for Renesas RAA215300, Rockchip RK808, Texas Instruments
TPS6594 and TPS6287x, and X-Powers AXP15060 and AXP313a"
* tag 'regulator-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (43 commits)
regulator: Add Renesas PMIC RAA215300 driver
regulator: dt-bindings: Add Renesas RAA215300 PMIC bindings
regulator: ltc3676: Use maple tree register cache
regulator: ltc3589: Use maple tree register cache
regulator: helper: Document ramp_delay parameter of regulator_set_ramp_delay_regmap()
regulator: mt6358: Use linear voltage helpers for single range regulators
regulator: mt6358: Const-ify mt6358_regulator_info data structures
regulator: mt6358: Drop *_SSHUB regulators
regulator: mt6358: Merge VCN33_* regulators
regulator: dt-bindings: mt6358: Drop *_sshub regulators
regulator: dt-bindings: mt6358: Merge ldo_vcn33_* regulators
regulator: dt-bindings: pwm-regulator: Add missing type for "pwm-dutycycle-unit"
regulator: Switch two more i2c drivers back to use .probe()
spi: spi-geni-qcom: Do not do DMA map/unmap inside driver, use framework instead
soc: qcom: geni-se: Add interfaces geni_se_tx_init_dma() and geni_se_rx_init_dma()
regulator: tps6594-regulator: Add driver for TI TPS6594 regulators
regulator: axp20x: Add AXP15060 support
regulator: axp20x: Add support for AXP313a variant
dt-bindings: pfuze100.yaml: Add an entry for interrupts
regulator: stm32-pwr: Fix regulator disabling
...
|
|
The COMMON_CLK config is not enabled in some of the architectures.
This causes build issues. Fix these issues by adding build dependency.
ERROR: modpost: "clk_unregister_fixed_rate" [drivers/regulator/raa215300.ko] undefined!
ERROR: modpost: "clk_register_fixed_rate" [drivers/regulator/raa215300.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306282012.sPQAuAN7-lkp@intel.com/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230628174004.63984-1-biju.das.jz@bp.renesas.com
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another busy release for regmap with the second half of the maple tree
register cache implementation, there's some smaller optimisations that
could be done but this should now be able to replace the rbtree cache
for most devices.
We also had a followup from Aidan MacDonald's refactoring of some of
the regmap-irq interfaces, the conversion is complete so the old
interfaces are removed. This means that even with the new features for
the maple tree cache we'd have a nice negative diffstat were it not
for the addition of a bunch more KUnit coverage.
There's one GPIO patch in here, it was a dependency for a cleanup of
an API in the regmap-irq code for which the gpio-104-dio-48e driver
was the only user.
Highlights:
- The maple tree cache can now load in default values more
efficiently, and is capabale of syncing multiple registers
in a single write during cache sync
- More KUnit coverage, including some coverage for raw I/O
and a dummy RAM backed cache to support it
- Removal of several old interfaces in regmap-irq now all
users have been modernised"
* tag 'regmap-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits)
regmap: Allow reads from write only registers with the flat cache
regmap: Drop early readability check
regmap: Check for register readability before checking cache during read
regmap: Add test to make sure we don't sync to read only registers
regmap: Add a test case for write only registers
regmap: Add test that writes to write only registers are prevented
regmap: Add debugfs file for forcing field writes
regmap: Don't check for changes in regcache_set_val()
regmap: maple: Implement block sync for the maple tree cache
regmap: Provide basic KUnit coverage for the raw register I/O
regmap: Provide a ram backed regmap with raw support
regmap: Add missing cache_only checks
regmap: regmap-irq: Move handle_post_irq to before pm_runtime_put
regmap: Load register defaults in blocks rather than register by register
regmap: mmio: Allow passing an empty config->reg_stride
regmap-irq: Drop backward compatibility for inverted mask/unmask
regmap-irq: Minor adjustments to .handle_mask_sync()
regmap-irq: Remove support for not_fixed_stride
regmap-irq: Remove type registers
regmap-irq: Remove virtual registers
...
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
One fix for incorrect error handling in the frame buffer mmap callback,
HuC init error handling fix, missing wakeref during GSC init and a build
fix when !CONFIG_PROC_FS.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZJLI8ON96ApPTl8H@tursulin-desk
|
|
The memory encryption initialization logic was moved from init/main.c
into arch_cpu_finalize_init() in commit 439e17576eb4 ("init, x86: Move
mem_encrypt_init() into arch_cpu_finalize_init()"), but a stale
declaration for the init function was left in <linux/init.h>.
And didn't cause any problems if you had X86_MEM_ENCRYPT enabled, which
apparently everybody involved did have. See also commit 0a9567ac5e6a
("x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build") in this whole
sad saga of conflicting declarations for different situations.
Reported-by: Matthew Wilcox <willy@infradead.org>
Fixes: 439e17576eb4 init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit ca5e863233e8 ("mm/gup: remove vmas parameter from
get_user_pages_remote()") removed the vma argument from GUP handling,
and instead added a helper function (get_user_page_vma_remote()) that
looks it up separately using 'vma_lookup()'. And then converted
existing users that needed a vma to use the helper instead.
However, the helper function intentionally acts exactly like the old
get_user_pages_remote() did, and only fills in 'vma' on successful page
lookup. Fine so far.
However, __access_remote_vm() wants the vma even for the unsuccessful
case, and used to do a
vma = vma_lookup(mm, addr);
explicitly to look it up when the get_user_page() failed.
However, that conversion commit incorrectly removed that vma lookup,
thinking that get_user_page_vma_remote() would have done it. Not so.
So add the vma_lookup() back in.
Fixes: ca5e863233e8 ("mm/gup: remove vmas parameter from get_user_pages_remote()")
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
|
|
Add a NULL check for the 'bdev' parameter of
dm_verity_loadpin_is_bdev_trusted(). The function is called
by loadpin_check(), which passes the block device that
corresponds to the super block of the file system from which
a file is being loaded. Generally a super_block structure has
an associated block device, however that is not always the
case (e.g. tmpfs).
Cc: stable@vger.kernel.org # v6.0+
Fixes: b6c1c5745ccc ("dm: Add verity helpers for LoadPin")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230627202800.1.Id63f7f59536d20f1ab83e1abdc1fda1471c7d031@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
The caller of (recently added) matchup_vm_state_with_baremetal() is an
__init function and it uses some __initdata data structures, so add the
__init annotation to it for consistency.
This addresses the following build warnings:
WARNING: modpost: vmlinux: section mismatch in reference: matchup_vm_state_with_baremetal+0x51 (section: .text) -> intel_idle_max_cstate_reached (section: .init.text)
WARNING: modpost: vmlinux: section mismatch in reference: matchup_vm_state_with_baremetal+0x62 (section: .text) -> cpuidle_state_table (section: .init.data)
WARNING: modpost: vmlinux: section mismatch in reference: matchup_vm_state_with_baremetal+0x79 (section: .text) -> icpu (section: .init.data)
Fixes: 0fac214bb75e ("intel_idle: Add a "Long HLT" C1 state for the VM guest mode")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
|
|
io_uring offloads task_work for cancelation purposes when the task is
exiting. This is conceptually fine, but we should be nicer and actually
wait for that work to complete before returning.
Add an argument to io_fallback_tw() telling it to flush the deferred
work when it's all queued up, and have it flush a ctx behind whenever
the ctx changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Handle trailing and leading separators when parsing UNC and prefix
paths in smb3_parse_devname(). Then, store the sanitised paths in
smb3_fs_context::source.
This fixes the following cases
$ mount //srv/share// /mnt/1 -o ...
$ cat /mnt/1/d0/f0
cat: /mnt/1/d0/f0: Invalid argument
The -EINVAL was returned because the client sent SMB2_CREATE "\\d0\f0"
rather than SMB2_CREATE "\d0\f0".
$ mount //srv//share /mnt/1 -o ...
mount: Invalid argument
The -EINVAL was returned correctly although the client only realised
it after sending a couple of bad requests rather than bailing out
earlier when parsing mount options.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
*_get_inode_info() functions expect -EREMOTE when query path info
calls find a DFS link, regardless whether !CONFIG_CIFS_DFS_UPCALL or
'nodfs' mount option. Otherwise, those files will miss the fake DFS
file attributes.
Before patch
$ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs
$ ls -l /mnt/1
ls: cannot access '/mnt/1/link': Operation not supported
total 0
-rwxr-xr-x 1 root root 0 Jul 26 2022 dfstest2_file1.txt
drwxr-xr-x 2 root root 0 Aug 8 2022 dir1
d????????? ? ? ? ? ? link
After patch
$ mount.cifs //srv/dfs /mnt/1 -o ...,nodfs
$ ls -l /mnt/1
total 0
-rwxr-xr-x 1 root root 0 Jul 26 2022 dfstest2_file1.txt
drwxr-xr-x 2 root root 0 Aug 8 2022 dir1
drwx--x--x 2 root root 0 Jun 26 20:29 link
Fixes: c877ce47e137 ("cifs: reduce roundtrips on create/qinfo requests")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Having the ClientGUID info makes it easier to debug
issues related to a client on a server that serves a
number of clients.
This change prints the ClientGUID in DebugData.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Chech the session state and skip it if it's exiting.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Don't collect exiting session in smb2_reconnect_server(), because it
will be released soon.
Note that the exiting session will stay in server->smb_ses_list until
it complete the cifs_free_ipc() and logoff() and then delete itself
from the list.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
All the server credits and in-flight info is protected by req_lock.
Once the req_lock is held, and we've determined that we have enough
credits to continue, this lock cannot be dropped till we've made the
changes to credits and in-flight count.
However, we used to drop the lock in order to avoid deadlock with
the recent srv_lock. This could cause the checks already made to be
invalidated.
Fixed it by moving the server status check to before locking req_lock.
Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.
This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage.
Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On CentOS 7, the following build error occurs.
scripts/mod/modpost.c: In function 'addend_arm_rel':
scripts/mod/modpost.c:1312:7: error: 'R_ARM_MOVW_ABS_NC' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_MOVW_ABS_NC:
^~~~~~~~~~~~~~~~~
R_ARM_THM_ABS5
scripts/mod/modpost.c:1312:7: note: each undeclared identifier is reported only once for each function it appears in
scripts/mod/modpost.c:1313:7: error: 'R_ARM_MOVT_ABS' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_MOVT_ABS:
^~~~~~~~~~~~~~
R_ARM_THM_ABS5
scripts/mod/modpost.c:1326:7: error: 'R_ARM_THM_MOVW_ABS_NC' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_THM_MOVW_ABS_NC:
^~~~~~~~~~~~~~~~~~~~~
R_ARM_THM_ABS5
scripts/mod/modpost.c:1327:7: error: 'R_ARM_THM_MOVT_ABS' undeclared (first use in this function); did you mean 'R_ARM_THM_ABS5'?
case R_ARM_THM_MOVT_ABS:
^~~~~~~~~~~~~~~~~~
R_ARM_THM_ABS5
Fixes: 12ca2c67d742 ("modpost: detect section mismatch for R_ARM_{MOVW_ABS_NC,MOVT_ABS}")
Fixes: cd1824fb7a37 ("modpost: detect section mismatch for R_ARM_THM_{MOVW_ABS_NC,MOVT_ABS}")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When user_events are disabled, it's write operation should return -EBADF.
Add this test cases.
Link: https://lkml.kernel.org/r/20230626111344.19136-4-sunliming@kylinos.cn
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
self-test
The user_event has not be enabled in write_fault test in ftrace
self-test, Just enable it.
Link: https://lkml.kernel.org/r/20230626111344.19136-3-sunliming@kylinos.cn
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
events are disabled
The writing operation return the count of writes regardless of whether events
are enabled or disabled. Switch it to return -EBADF to indicates that the event
is disabled.
Link: https://lkml.kernel.org/r/20230626111344.19136-2-sunliming@kylinos.cn
Cc: stable@vger.kernel.org
7f5a08c79df35 ("user_events: Add minimal support for trace_event into ftrace")
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add ADI MAX77541/MAX77540 devicetree document.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230412111256.40013-5-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The MAX77541 has an 8-bit Successive Approximation Register (SAR) ADC
with four multiplexers for supporting the telemetry feature.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230412111256.40013-4-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Regulator driver for both MAX77541 and MAX77540.
The MAX77541 is a high-efficiency step-down converter
with two 3A switching phases for single-cell Li+ battery
and 5VDC systems.
The MAX77540 is a high-efficiency step-down converter
with two 3A switching phases.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230412111256.40013-3-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add ADI MAX77541/MAX77540 Regulator devicetree document.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230412111256.40013-2-okan.sahin@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
If mas_store_gfp() in the gather loop failed, the 'error' variable that
ultimately gets returned was not being set. In many cases, its original
value of -ENOMEM was still in place, and that was fine. But if VMAs had
been split at the start or end of the range, then 'error' could be zero.
Change to the 'error = foo(); if (error) goto …' idiom to fix the bug.
Also clean up a later case which avoided the same bug by *explicitly*
setting error = -ENOMEM right before calling the function that might
return -ENOMEM.
In a final cosmetic change, move the 'Point of no return' comment to
*after* the goto. That's been in the wrong place since the preallocation
was removed, and this new error path was added.
Fixes: 606c812eb1d5 ("mm/mmap: Fix error path in do_vmi_align_munmap()")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
|
|
When building with clang-15: this warning is produced:
../drivers/media/dvb-frontends/mb86a20s.c:1572:6: error: variable 'active_layers' set but not used [-Werror,-Wunused-but-set-variable]
int active_layers = 0, pre_ber_layers = 0, post_ber_layers = 0;
^
1 error generated.
Link: https://lore.kernel.org/linux-media/20230628130339.206261-1-mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
cmd_vdso_check checks if there are any dynamic relocations in
vdso64.so.dbg. When kernel is compiled with
-mno-pic-data-is-text-relative, R_390_RELATIVE relocs are generated and
this results in kernel build error.
kpatch uses -mno-pic-data-is-text-relative option when building the
kernel to prevent relative addressing between code and data. The flag
avoids relocation error when klp text and data are too far apart
kpatch does not patch vdso code and hence the
mno-pic-data-is-text-relative flag is not essential.
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The .align directive has inconsistent behavior across architectures. Use
.balign instead everywhere. This is a no-op for s390, but with this there
is no mix in using .align and .balign anymore.
Future code is supposed to use only .balign.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Nathan Chancellor reported a kernel build error on Fedora 39:
$ clang --version | head -1
clang version 16.0.5 (Fedora 16.0.5-1.fc39)
$ s390x-linux-gnu-ld --version | head -1
GNU ld version 2.40-1.fc39
$ make -skj"$(nproc)" ARCH=s390 CC=clang CROSS_COMPILE=s390x-linux-gnu- olddefconfig all
s390x-linux-gnu-ld: arch/s390/boot/startup.o(.text+0x5b4): misaligned symbol `_decompressor_end' (0x35b0f) for relocation R_390_PC32DBL
make[3]: *** [.../arch/s390/boot/Makefile:78: arch/s390/boot/vmlinux] Error 1
It turned out that the problem with misaligned symbols on s390 was fixed
with commit 80ddf5ce1c92 ("s390: always build relocatable kernel") for the
kernel image, but did not take into account that the decompressor uses its
own set of CFLAGS, which come without -fPIE.
Add the -fPIE flag also to the decompresser CFLAGS to fix this.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: CKI <cki-project@redhat.com>
Suggested-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1747
Link: https://lore.kernel.org/32935.123062114500601371@us-mta-9.us.mimecast.lan/
Link: https://lore.kernel.org/r/20230622125508.1068457-1-hca@linux.ibm.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
zcrypt_unlocked_ioctl() allocates 256k with kzalloc() which is likely to
fail if memory is fragmented. To avoid that use kvmalloc_array() instead,
like it is done at several other places for the same reason.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When adding an undefined symbol the build still succeeds, but
userspace is crashing trying to execute vdso because the
undefined symbol is not resolved. Add the check for undefined
symbols to prevent this.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
We should always include <asm/io.h> in ARCH, but not <asm-generic/io.h>
directly. Otherwise, macro defined by ARCH won't be seen and could cause
building error.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306100105.8GHnoMCP-lkp@intel.com/
Link: https://lore.kernel.org/all/ZIWrtFMUnRfVP5h0@MiWiFi-R3L-srv/
Signed-off-by: Baoquan He <bhe@redhat.com>
[agordeev@linux.ibm.com changed patch description]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
VMEM_MAX_PHYS is supposed to be the highest physical
address that can be added to the identity mapping.
It should match ident_map_size, which has the same
meaning. However, unlike ident_map_size it is not
adjusted against various limiting factors (see the
comment to setup_ident_map_size() function). That
renders all checks against VMEM_MAX_PHYS invalid.
Further, VMEM_MAX_PHYS is currently set to vmemmap,
which is an address in virtual memory space. However,
it gets compared against physical addresses in various
locations. That works, because both address spaces
are the same on s390, but otherwise it is wrong.
Instead of fixing VMEM_MAX_PHYS misuse and semantics
just remove it.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Pull a typo fix in MIDI 2.0 helper code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A wrong size for UMP_SYSTEM_STATUS_MIDI_TIME_CODE and case
UMP_SYSTEM_STATUS_SONG_SELECT was reported at converting to the legacy
MIDI 1.0 stream. This patch corrects the value.
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230628094352.15754-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It is preferable not to populate the constant array for constant strings
on the stack.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230627235406.289970-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Don't populate the const array on the stack, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230627113253.700065-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors,
so also select REGMAP to prevent the build errors.
../drivers/media/cec/i2c/ch7322.c:158:21: error: variable 'ch7322_regmap' has initializer but incomplete type
158 | static const struct regmap_config ch7322_regmap = {
../drivers/media/cec/i2c/ch7322.c:159:10: error: 'const struct regmap_config' has no member named 'reg_bits'
159 | .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:159:21: warning: excess elements in struct initializer
159 | .reg_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:10: error: 'const struct regmap_config' has no member named 'val_bits'
160 | .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:160:21: warning: excess elements in struct initializer
160 | .val_bits = 8,
../drivers/media/cec/i2c/ch7322.c:161:10: error: 'const struct regmap_config' has no member named 'max_register'
161 | .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:161:25: warning: excess elements in struct initializer
161 | .max_register = 0x7f,
../drivers/media/cec/i2c/ch7322.c:162:10: error: 'const struct regmap_config' has no member named 'disable_locking'
162 | .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c:162:28: warning: excess elements in struct initializer
162 | .disable_locking = true,
../drivers/media/cec/i2c/ch7322.c: In function 'ch7322_probe':
../drivers/media/cec/i2c/ch7322.c:468:26: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
468 | ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c:468:24: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
468 | ch7322->regmap = devm_regmap_init_i2c(client, &ch7322_regmap);
../drivers/media/cec/i2c/ch7322.c: At top level:
../drivers/media/cec/i2c/ch7322.c:158:35: error: storage size of 'ch7322_regmap' isn't known
158 | static const struct regmap_config ch7322_regmap = {
Link: https://lore.kernel.org/linux-media/20230608025435.29249-1-rdunlap@infradead.org
Fixes: 21b9a47e0ec7 ("media: cec: i2c: ch7322: Add ch7322 CEC controller driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Chase <jnchase@google.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Joe Tessler <jrt@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Link: https://lore.kernel.org/linux-media/20230522105049.1467313-19-schnelle@linux.ibm.com
Reviewed-by: Sean Young <sean@mess.org> # media/rc
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The tc358746 driver selects CONFIG_GENERIC_PHY_MIPI_DPHY and links to
that, but this fails when CONFIG_GENERIC_PHY is disabled, because Kbuild
then never enters the drivers/phy directory for building object files:
ERROR: modpost: "phy_mipi_dphy_get_default_config_for_hsclk" [drivers/media/i2c/tc358746.ko] undefined!
Add an explicit 'select GENERIC_PHY' here to ensure that the directory
is entered, and add another dependency on that symbol so make it
more obvious what is going on if another driver has the same problem,
as this will produce a Kconfig warning.
Link: https://lore.kernel.org/linux-media/20230623152318.2276816-1-arnd@kernel.org
Fixes: 80a21da360516 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If loading a core PMU fails, legacy hardware/cache events may segv due
to there being no PMU. Create a placeholder empty PMU for this
case. This was discussed in:
https://lore.kernel.org/lkml/20230614151625.2077-1-yangjihong1@huawei.com/
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230627182834.117565-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pull arm64 documentation move from Jonathan Corbet:
"Move the arm64 architecture documentation under Documentation/arch/.
This brings some order to the documentation directory, declutters the
top-level directory, and makes the documentation organization more
closely match that of the source"
* tag 'docs-arm64-move' of git://git.lwn.net/linux:
perf arm-spe: Fix a dangling Documentation/arm64 reference
mm: Fix a dangling Documentation/arm64 reference
arm64: Fix dangling references to Documentation/arm64
dt-bindings: fix dangling Documentation/arm64 reference
docs: arm64: Move arm64 documentation under Documentation/arch/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934c12b.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68bcb4 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Check for out-of-memory condition (Jiasheng Jiang)
- Convert to platform remove callback returning void (Uwe Kleine-König)
* tag 'pstore-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: Add check for kstrdup
pstore/ram: Convert to platform remove callback returning void
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Fix a few comments for correctness and typos (Baruch Siach)
- Small simplifications for binfmt (Christophe JAILLET)
- Set p_align to 4 for PT_NOTE in core dump (Fangrui Song)
* tag 'execve-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: fix comment typo s/reset/regset/
elf: correct note name comment
binfmt: Slightly simplify elf_fdpic_map_file()
binfmt: Use struct_size()
coredump, vmcore: Set p_align to 4 for PT_NOTE
|
|
Pull smack updates from Casey Schaufler:
"There are two patches, both of which change how Smack initializes the
SMACK64TRANSMUTE extended attribute.
The first corrects the behavior of overlayfs, which creates inodes
differently from other filesystems. The second ensures that transmute
attributes specified by mount options are correctly assigned"
* tag 'Smack-for-6.5' of https://github.com/cschaufler/smack-next:
smack: Record transmuting in smk_transmuted
smack: Retrieve transmuting information in smack_inode_getsecurity()
|
