| Age | Commit message (Collapse) | Author |
|---|
|
Impact: build fix
API was changed, but not all usage sites were converted:
net/ipv4/route.c: In function ‘ip_rt_init’:
net/ipv4/route.c:3379: error: too few arguments to function ‘__alloc_percpu’
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Make io_mapping_create_wc and io_mapping_free go through PAT to make sure
that there are no memory type aliases.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
io_mapping_create_wc should take a resource_size_t parameter in place of
unsigned long. With unsigned long, there will be no way to map greater than 4GB
address in i386/32 bit.
On x86, greater than 4GB addresses cannot be mapped on i386 without PAE. Return
error for such a case.
Patch also adds a structure for io_mapping, that saves the base, size and
type on HAVE_ATOMIC_IOMAP archs, that can be used to verify the offset on
io_mapping_map calls.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add a function to check and keep identity maps in sync, when changing
any memory type. One of the follow on patches will also use this
routine.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
io_mapping_create_wc can return NULL on error and io_mapping_free() should be
called on one of the error-cleanup path.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
- print test pattern instead of pattern number,
- show pattern as stored in memory,
- use proper priority flags,
- consistent use of u64 throughout the code
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: code cleanup
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: code cleanup
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
available patterns
Impact: fix unexpected behaviour when pattern number is out of range
Current implementation provides 4 patterns for memtest. The code doesn't
check whether the memtest parameter value exceeds the maximum pattern number.
Instead the memtest code pretends to test with non-existing patterns, e.g.
when booting with memtest=10 I've observed the following
...
early_memtest: pattern num 10
0000001000 - 0000006000 pattern 0
...
0000001000 - 0000006000 pattern 1
...
0000001000 - 0000006000 pattern 2
...
0000001000 - 0000006000 pattern 3
...
0000001000 - 0000006000 pattern 4
...
0000001000 - 0000006000 pattern 5
...
0000001000 - 0000006000 pattern 6
...
0000001000 - 0000006000 pattern 7
...
0000001000 - 0000006000 pattern 8
...
0000001000 - 0000006000 pattern 9
...
But in fact Linux didn't test anything for patterns > 4 as the default
case in memtest() is to leave the function.
I suggest to use the memtest parameter as the number of tests to be
performed and to re-iterate over all existing patterns.
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: make more types of copies non-temporal
This change makes the following simple fix:
30d697f: x86: fix performance regression in write() syscall
A bit more sophisticated: we check the 'total' number of bytes
written to decide whether to copy in a cached or a non-temporal
way.
This will for example cause the tail (modulo 4096 bytes) chunk
of a large write() to be non-temporal too - not just the page-sized
chunks.
Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: cleanup, enable future change
Add a 'total bytes copied' parameter to __copy_from_user_*nocache(),
and update all the callsites.
The parameter is not used yet - architecture code can use it to
more intelligently decide whether the copy should be cached or
non-temporal.
Cc: Salman Qazi <sqazi@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
|
|
This patch adds two new device ids to the asix driver.
One comes directly from the asix driver on their web site, the other was
reported by Armani Liao as needed for the MSI X320 to get the driver to
work properly for it.
Reported-by: Armani Liao <aliao@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
This snuck in when I wrote phys object support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
However we still have another issue with ioremap_wc not falling back
properly or somehow doing something else stupid, this probably needs
to be tracked down.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
edid->revision == 0 should be valid (at least, so the error message
indicates. :) and wikipedia seems to indicate that EDID 1.0 existed.
We can dump the entire check, since edid->revision is a u8, so
it can't ever be less than 0.
Marko reports in RH bz#476735 that his monitor claims to be
EDID 1.0, and therefore hits the check and is stuck at 800x600 because
of it.
Reported-by: Marko Ristola <marko.ristola@kolumbus.fi>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
The first time we install a mode, the vblank will be disabled for a pipe
and so drm_vblank_get() in drm_vblank_pre_modeset() will fail. As we
unconditionally call drm_vblank_put() afterwards, the vblank reference
counter becomes unbalanced.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
In some cases we may receive a mode config that has a different
CRTC<->encoder map that the current configuration. In that case, we
need to disable any re-routed encoders before setting the mode,
otherwise they may not pick up the new CRTC (if the output types are
incompatible for example).
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
We've seen cases in the wild where the VBT sync data is wrong, so add
some code to fix it up in that case, taking care to make sure that the
total is greater than the sync end.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
These are normal; we walk through different values looking for the right
one, so why flood the screen with messages?
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
|
|
There has been a race in raid10 and raid1 for a long time
which has only recently started showing up due to a scheduler changed.
When a sync_read request finishes, as soon as reschedule_retry
is called, another thread can mark the resync request as having
completed, so md_do_sync can finish, ->stop can be called, and
->conf can be freed. So using conf after reschedule_retry is not
safe.
Similarly, when finishing a sync_write, calling md_done_sync must be
the last thing we do, as it allows a chain of events which will free
conf and other data structures.
The first of these requires action in raid10.c
The second requires action in raid1.c and raid10.c
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
For raid1/4/5/6, resync (fixing inconsistencies between devices) is
very similar to recovery (rebuilding a failed device onto a spare).
The both walk through the device addresses in order.
For raid10 it can be quite different. resync follows the 'array'
address, and makes sure all copies are the same. Recover walks
through 'device' addresses and recreates each missing block.
The 'bitmap_cond_end_sync' function allows the write-intent-bitmap
(When present) to be updated to reflect a partially completed resync.
It makes assumptions which mean that it does not work correctly for
raid10 recovery at all.
In particularly, it can cause bitmap-directed recovery of a raid10 to
not recovery some of the blocks that need to be recovered.
So move the call to bitmap_cond_end_sync into the resync path, rather
than being in the common "resync or recovery" path.
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
When doing recovery on a raid10 with a write-intent bitmap, we only
need to recovery chunks that are flagged in the bitmap.
However if we choose to skip a chunk as it isn't flag, the code
currently skips the whole raid10-chunk, thus it might not recovery
some blocks that need recovering.
This patch fixes it.
In case that is confusing, it might help to understand that there
is a 'raid10 chunk size' which guides how data is distributed across
the devices, and a 'bitmap chunk size' which says how much data
corresponds to a single bit in the bitmap.
This bug only affects cases where the bitmap chunk size is smaller
than the raid10 chunk size.
Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
|
|
Impact: cleanup
Unused macro parameters cause spurious unused variable warnings.
Convert all cacheflush macros to inline functions to avoid the
warnings and achieve better type checking.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Recent changes in setup_percpu.c made a now meaningless DBG()
statement fail to compile and introduced a
comparison-of-different-types warning. Fix them.
Compile failure is reported by Ingo Molnar.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
Conflicts (resolved):
arch/x86/configs/x86_64_defconfig
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: defconfig change
Enable MCE in the 32-bit defconfig.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: defconfig change
Enable MCE in the 64-bit defconfig.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc
* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
proc: fix PG_locked reporting in /proc/kpageflags
|
|
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
Add i2c_board_info for RiscPC PCF8583
i2c: Make sure i2c_algo_bit_data.timeout is HZ-independent
i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT
i2c: Timeouts reach -1
i2c: Fix misplaced parentheses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firedtv: dvb_frontend_info for FireDTV S2, fix "frequency limits undefined" error
firedtv: massive refactoring
firedtv: rename files, variables, functions from firesat to firedtv
firedtv: Use DEFINE_SPINLOCK
firedtv: fix registration - adapter number could only be zero
firedtv: use length_field() of PMT as length
firedtv: fix returned struct for ca_info
firedtv: cleanups and minor fixes
ieee1394: remove superfluous assertions
ieee1394: inherit ud vendor_id from node vendor_id
ieee1394: add hpsb_node_read() and hpsb_node_lock()
ieee1394: use correct barrier types between accesses of nodeid and generation
firesat: copyrights, rename to firedtv, API conversions, fix remote control input
firesat: avc resend
firesat: update isochronous interface, add CI support
firesat: add DVB-S support for DVB-S2 devices
firesat: fix DVB-S2 device recognition
DVB: add firesat driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin()
ext4: Add fallback for find_group_flex
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
|
|
Impact: cleanup
one 32-bit system reports:
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.0 present.
last_pfn = 0x1c000 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1c000000 @ 7000-c000
..
RAMDISK: 1bc69000 - 1bfef4fa
..
0MB HIGHMEM available.
448MB LOWMEM available.
mapped low ram: 0 - 1c000000
low ram: 00000000 - 1c000000
bootmap 00002000 - 00005800
(9 early reservations) ==> bootmem [0000000000 - 001c000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 00009ed14c] TEXT DATA BSS ==> [0000400000 - 00009ed14c]
#4 [001bc69000 - 001bfef4fa] RAMDISK ==> [001bc69000 - 001bfef4fa]
#5 [00009ee000 - 00009f2000] INIT_PG_TABLE ==> [00009ee000 - 00009f2000]
#6 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#7 [0000007000 - 0000007000] PGTABLE
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Notice the strange blank PGTABLE entry.
The reason is init_pg_table is big enough, and zero range is called
with init_memory_mapping/reserve_early().
So try to check the range in reserve_early()
v2: fix the reversed compare
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: nickpiggin@yahoo.com.au
Cc: ink@jurassic.park.msu.ru
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Impact: Fix marginal race condition
One the first CPU the machine checks are enabled early before
the local APIC is enabled. This could in theory lead
to some lost CMCI events very early during boot because
CMCIs cannot be delivered with disabled LAPIC.
The poller also doesn't recover from this because it doesn't
check CMCI banks.
Add an explicit CMCI banks check after the LAPIC is enabled.
This is only done for CPU #0, the other CPUs only initialize
machine checks after the LAPIC is on.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Avoids confusing other OSes.
Disable the CMCI vector on reboot to avoid confusing other OS.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Bug fix on UP
The MCE code is reinitialized from resume, so we can't use
__cpuinit/__cpuexit for most of the code. Remove those annotations
for anything downstream of mce_init().
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: Major new feature
Intel CMCI (Corrected Machine Check Interrupt) is a new
feature on Nehalem CPUs. It allows the CPU to trigger
interrupts on corrected events, which allows faster
reaction to them instead of with the traditional
polling timer.
Also use CMCI to discover shared banks. Machine check banks
can be shared by CPU threads or even cores. Using the CMCI enable
bit it is possible to detect the fact that another CPU already
saw a specific bank. Use this to assign shared banks only
to one CPU to avoid reporting duplicated events.
On CPU hot unplug bank sharing is re discovered. This is done
using a thread that cycles through all the CPUs.
To avoid races between the poller and CMCI we only poll
for banks that are not CMCI capable and only check CMCI
owned banks on a interrupt.
The shared banks ownership information is currently only used for
CMCI interrupts, not polled banks.
The sharing discovery code follows the algorithm recommended in the
IA32 SDM Vol3a 14.5.2.1
The CMCI interrupt handler just calls the machine check poller to
pick up the machine check event that caused the interrupt.
I decided not to implement a separate threshold event like
the AMD version has, because the threshold is always one currently
and adding another event didn't seem to add any value.
Some code inspired by Yunhong Jiang's Xen implementation,
which was in term inspired by a earlier CMCI implementation
by me.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Impact: New register definitions only
CMCI means support for raising an interrupt on a corrected machine
check event instead of having to poll for it. It's a new feature in
Intel Nehalem CPUs available on some machine check banks.
For details see the IA32 SDM Vol3a 14.5
Define the registers for it as a preparation for further patches.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Define a per cpu bitmap that contains the banks polled by the machine
check poller. This is needed for the CMCI code in the next patches
to be able to disable polling on specific banks.
The bank by default contains all banks, so there is no behaviour
change. Only future code will remove some banks from the polling
set.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
