summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-07ceph: send cap release message early on failed revoke.Greg Farnum
If an MDS tries to revoke caps that we don't have, we want to send releases early since they probably contain the caps message the MDS is looking for. Previously, we only sent the messages if we didn't have the inode either. But in a multi-mds system we can retain the inode after dropping all caps for a single MDS. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-07ceph: Update max_len with minimum required sizeAneesh Kumar K.V
encode_fh on error should update max_len with minimum required size, so that caller can redo the call with the reallocated buffer. This is required with open by handle patch series Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-07ceph: Fix return value of encode_fh functionAneesh Kumar K.V
encode_fh function should return 255 on error as done by other file system to indicate EOVERFLOW. Also max_len is in sizeof(u32) units and not in bytes. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-07ceph: avoid null deref in osd request error pathSage Weil
If we interrupt an osd request, we call __cancel_request, but it wasn't verifying that req->r_osd was non-NULL before dereferencing it. This could cause a crash if osds were flapping and we aborted a request on said osd. Reported-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-07ceph: fix list_add usage on unsafe_writes listHenry C Chang
Fix argument order. Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-07drm/i915: Free hardware status page on unload when physically mappedKeith Packard
A physically mapped hardware status page is allocated at driver load time but was never freed. Call the existing code to free this page at driver unload time on hardware which uses this kind. Signed-off-by: Keith Packard <keithp@keithp.com> [ickle: call before tearing down registers on KMS-only path, as pointed out by Dave Airlie] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2010-10-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6
2010-10-07HWPOISON: Stop shrinking at right page countAndi Kleen
When we call the slab shrinker to free a page we need to stop at page count one because the caller always holds a single reference, not zero. This avoids useless looping over slab shrinkers and freeing too much memory. Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07HWPOISON: Report correct address granuality for AO huge page errorsAndi Kleen
The SIGBUS user space signalling is supposed to report the address granuality of a corruption. Pass this information correctly for huge pages by querying the hpage order. Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07HWPOISON: Copy si_addr_lsb to userAndi Kleen
The original hwpoison code added a new siginfo field si_addr_lsb to pass the granuality of the fault address to user space. Unfortunately this field was never copied to user space. Fix this here. I added explicit checks for the MCEERR codes to avoid having to patch all potential callers to initialize the field. Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07page-types.c: fix name of unpoison interfaceNaoya Horiguchi
The page-types utility still uses an out of date name for the unpoison interface: debugfs:hwpoison/renew-pfn This patch renames and fixes it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-10-07elevator: fix oops on early call to elevator_change()Jens Axboe
2.6.36 introduces an API for drivers to switch the IO scheduler instead of manually calling the elevator exit and init functions. This API was added since q->elevator must be cleared in between those two calls. And since we already have this functionality directly from use by the sysfs interface to switch schedulers online, it was prudent to reuse it internally too. But this API needs the queue to be in a fully initialized state before it is called, or it will attempt to unregister elevator kobjects before they have been added. This results in an oops like this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000051 IP: [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 PGD 47ddfc067 PUD 47c6a1067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/0000:04:00.1/irq CPU 2 Modules linked in: t(+) loop hid_apple usbhid ahci ehci_hcd uhci_hcd libahci usbcore nls_base igb Pid: 7319, comm: modprobe Not tainted 2.6.36-rc6+ #132 QSSC-S4R/QSSC-S4R RIP: 0010:[<ffffffff8116f15e>] [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 RSP: 0018:ffff88027da25d08 EFLAGS: 00010246 RAX: ffff88047c68c528 RBX: 00000000fffffffe RCX: 0000000000000000 RDX: 000000000000002f RSI: 000000000000002f RDI: ffff88047e196c88 RBP: ffff88027da25d38 R08: 0000000000000000 R09: d84156c5635688c0 R10: d84156c5635688c0 R11: 0000000000000000 R12: ffff88047e196c88 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88047c68c528 FS: 00007fcb0b26f6e0(0000) GS:ffff880287400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000051 CR3: 000000047e76e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 7319, threadinfo ffff88027da24000, task ffff88027d377090) Stack: ffff88027da25d58 ffff88047c68c528 00000000fffffffe ffff88047e196c88 <0> ffff88047c68c528 ffff88047e05bd90 ffff88027da25d78 ffffffff8123fb77 <0> ffff88047e05bd90 0000000000000000 ffff88047e196c88 ffff88047c68c528 Call Trace: [<ffffffff8123fb77>] kobject_add_internal+0xe7/0x1f0 [<ffffffff8123fd98>] kobject_add_varg+0x38/0x60 [<ffffffff8123feb9>] kobject_add+0x69/0x90 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0 [<ffffffff8103d48d>] ? sub_preempt_count+0x9d/0xe0 [<ffffffff8143de20>] ? _raw_spin_unlock+0x30/0x50 [<ffffffff8116efe0>] ? sysfs_remove_dir+0x20/0xa0 [<ffffffff8116eff4>] ? sysfs_remove_dir+0x34/0xa0 [<ffffffff81224204>] elv_register_queue+0x34/0xa0 [<ffffffff81224aad>] elevator_change+0xfd/0x250 [<ffffffffa007e000>] ? t_init+0x0/0x361 [t] [<ffffffffa007e000>] ? t_init+0x0/0x361 [t] [<ffffffffa007e0a8>] t_init+0xa8/0x361 [t] [<ffffffff810001de>] do_one_initcall+0x3e/0x170 [<ffffffff8108c3fd>] sys_init_module+0xbd/0x220 [<ffffffff81002f2b>] system_call_fastpath+0x16/0x1b Code: e5 41 56 41 55 41 54 49 89 fc 53 48 83 ec 10 48 85 ff 74 52 48 8b 47 18 49 c7 c5 00 46 61 81 48 85 c0 74 04 4c 8b 68 30 45 31 f6 <41> 80 7d 51 00 74 0e 49 8b 44 24 28 4c 89 e7 ff 50 20 49 89 c6 RIP [<ffffffff8116f15e>] sysfs_create_dir+0x2e/0xc0 RSP <ffff88027da25d08> CR2: 0000000000000051 ---[ end trace a6541d3bf07945df ]--- Fix this by adding a registered bit to the elevator queue, which is set when the sysfs kobjects have been registered. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-10-07drm: don't drop handle reference on unloadDave Airlie
since the handle references are all tied to a file_priv, and when it disappears all the handle refs go with it. The fbcon ones we'd only notice on unload, but the nouveau notifier one would would happen on reboot. nouveau: Reported-by: Marc Dionne <marc.c.dionne@gmail.com> nouveau: Tested-by: Marc Dionne <marc.c.dionne@gmail.com> i915 unload: Reported-by: Keith Packard <keithp@keithp.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06xfs: properly account for reclaimed inodesJohannes Weiner
When marking an inode reclaimable, a per-AG counter is increased, the inode is tagged reclaimable in its per-AG tree, and, when this is the first reclaimable inode in the AG, the AG entry in the per-mount tree is also tagged. When an inode is finally reclaimed, however, it is only deleted from the per-AG tree. Neither the counter is decreased, nor is the parent tree's AG entry untagged properly. Since the tags in the per-mount tree are not cleared, the inode shrinker iterates over all AGs that have had reclaimable inodes at one point in time. The counters on the other hand signal an increasing amount of slab objects to reclaim. Since "70e60ce xfs: convert inode shrinker to per-filesystem context" this is not a real issue anymore because the shrinker bails out after one iteration. But the problem was observable on a machine running v2.6.34, where the reclaimable work increased and each process going into direct reclaim eventually got stuck on the xfs inode shrinking path, trying to scan several million objects. Fix this by properly unwinding the reclaimable-state tracking of an inode when it is reclaimed. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: stable@kernel.org Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-10-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-10-07md: check return code of read_sb_pageVasiliy Kulikov
Function read_sb_page may return ERR_PTR(...). Check for it. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-07md/raid1: minor bio initialisation improvements.NeilBrown
When performing a resync we pre-allocate some bios and repeatedly use them. This requires us to re-initialise them each time. One field (bi_comp_cpu) and some flags weren't being initiaised reliably. Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-07md/raid1: avoid overflow in raid1 resync when bitmap is in use.NeilBrown
bitmap_start_sync returns - via a pass-by-reference variable - the number of sectors before we need to check with the bitmap again. Since commit ef4256733506f245 this number can be substantially larger, 2^27 is a common value. Unfortunately it is an 'int' and so when raid1.c:sync_request shifts it 9 places to the left it becomes 0. This results in a zero-length read which the scsi layer justifiably complains about. This patch just removes the shift so the common case becomes safe with a trivially-correct patch. In the next merge window we will convert this 'int' to a 'sector_t' Reported-by: "George Spelvin" <linux@horizon.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-10-06Linux 2.6.36-rc7v2.6.36-rc7Linus Torvalds
2010-10-06Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: Octeon: Place cnmips_cu2_setup in __init memory. MIPS: Don't place cu2 notifiers in __cpuinitdata MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin MIPS: Alchemy: Resolve prom section mismatches MIPS: Fix syscall 64 bit number comments. MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls. MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN MIPS: N32: Fix getdents64 syscall for n32 MIPS: Remove pr_<level> uses of KERN_<level> MIPS: PNX8550: Sort out machine halt, restart and powerdown functions. MIPS: GIC: Remove dependencies from Malta files. MIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC. MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask. MIPS: Audit: Fix hang in entry.S. MIPS: Document why RELOC_HIDE is there. MIPS: Octeon: Determine if helper needs to be built MIPS: Use generic atomic64 for 32-bit kernels MIPS: RM7000: Symbol should be static MIPS: kspd: Adjust confusing if indentation MIPS: Fix a typo.
2010-10-06mac80211: delete AddBA response timerJohannes Berg
We never delete the addBA response timer, which is typically fine, but if the station it belongs to is deleted very quickly after starting the BA session, before the peer had a chance to reply, the timer may fire after the station struct has been freed already. Therefore, we need to delete the timer in a suitable spot -- best when the session is being stopped (which will happen even then) in which case the delete will be a no-op most of the time. I've reproduced the scenario and tested the fix. This fixes the crash reported at http://mid.gmane.org/4CAB6F96.6090701@candelatech.com Cc: stable@kernel.org Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06ath9k_hw: fix regression in ANI listen time calculationFelix Fietkau
wireless-testing commit 37e5bf6535a4d697fb9fa6f268a8354a612cbc00 Author: Luis R. Rodriguez <lrodriguez@atheros.com> Date: Sat Jun 12 00:33:40 2010 -0400 ath9k_hw: fix clock rate calculations for ANI This commit accidentally broke clock rate calculation by doubling the calculated clock rate Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: writeback: always use sb->s_bdi for writeback purposes
2010-10-06Merge branch 'v2.6.36-rc6-urgent-fixes' of ↵Linus Torvalds
git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'v2.6.36-rc6-urgent-fixes' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: do not initialize PV timers on HVM if !xen_have_vector_callback xen: do not set xenstored_ready before xenbus_probe on hvm
2010-10-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: Initialize total_len in fuse_retrieve()
2010-10-06HID: hidraw, fix a NULL pointer dereference in hidraw_writeAntonio Ospite
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa0f0a625>] hidraw_write+0x3b/0x116 [hid] [...] This is reproducible by disconnecting the device while userspace writes to dev node in a loop and doesn't check return values in order to exit the loop. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06HID: hidraw, fix a NULL pointer dereference in hidraw_ioctlAntonio Ospite
BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa02c66b4>] hidraw_ioctl+0xfc/0x32c [hid] [...] This is reproducible by disconnecting the device while userspace does ioctl in a loop and doesn't check return values in order to exit the loop. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Cc: stable@kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-06drm/radeon/kms: make sure blit addr masks are 64 bitAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-05caif: fix two caif_connect() bugsEric Dumazet
caif_connect() might dereference a netdevice after dev_put() it. It also doesnt check dev_get_by_index() return value and could dereference a NULL pointer. Fix it, using RCU to avoid taking a reference. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05bonding: fix WARN_ON when writing to bond_master sysfs fileNeil Horman
Fix a WARN_ON failure in bond_masters sysfs file Got a report of this warning recently bonding: bond0 is being created... ------------[ cut here ]------------ WARNING: at fs/proc/generic.c:590 proc_register+0x14d/0x185() Hardware name: ProLiant BL465c G1 proc_dir_entry 'bonding/bond0' already registered Modules linked in: bonding ipv6 tg3 bnx2 shpchp amd64_edac_mod edac_core ipmi_si ipmi_msghandler serio_raw i2c_piix4 k8temp edac_mce_amd hpwdt microcode hpsa cc iss radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wai t_scan] Pid: 935, comm: ifup-eth Not tainted 2.6.33.5-124.fc13.x86_64 #1 Call Trace: [<ffffffff8104b54c>] warn_slowpath_common+0x77/0x8f [<ffffffff8104b5b1>] warn_slowpath_fmt+0x3c/0x3e [<ffffffff8114bf0b>] proc_register+0x14d/0x185 [<ffffffff8114c20c>] proc_create_data+0x87/0xa1 [<ffffffffa0211e9b>] bond_create_proc_entry+0x55/0x95 [bonding] [<ffffffffa0215e5d>] bond_init+0x95/0xd0 [bonding] [<ffffffff8138cd97>] register_netdevice+0xdd/0x29e [<ffffffffa021240b>] bond_create+0x8e/0xb8 [bonding] [<ffffffffa021c4be>] bonding_store_bonds+0xb3/0x1c1 [bonding] [<ffffffff812aec85>] class_attr_store+0x27/0x29 [<ffffffff8115423d>] sysfs_write_file+0x10f/0x14b [<ffffffff81101acf>] vfs_write+0xa9/0x106 [<ffffffff81101be2>] sys_write+0x45/0x69 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b ---[ end trace a677c3f7f8b16b1e ]--- bonding: Bond creation failed. It happens because a user space writer to bond_master can try to register an already existing bond interface name. Fix it by teaching bond_create to check for the existance of devices with that name first in cases where a non-NULL name parameter has been passed in Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06Merge branch 'drm-radeon-next' of ../drm-radeon-next into drm-core-nextDave Airlie
* 'drm-radeon-next' of ../drm-radeon-next: drm/radeon/kms: add drm blit support for evergreen drm/radeon: Modify radeon_pm_in_vbl to use radeon_get_crtc_scanoutpos() drm/radeon: Add function for display scanout position query. drm/radeon/kms: rework spread spectrum handling drm/radeon/kms: remove new pll algo drm/radeon/kms: remove some pll algo flags drm/radeon/kms: prefer high post dividers in legacy pll algo drm/radeon/kms: properly handle 40 bit MC addresses in the cursor code drm/radeon: add properties to configure the width of the underscan borders drm/radeon/kms/r6xx+: use new style fencing (v3) drm/radeon/kms: enable writeback (v2) drm/radeon/kms: clean up r6xx/r7xx blit init (v2)
2010-10-06Merge branch 'drm-kdb-next' into drm-core-nextDave Airlie
* drm-kdb-next: drm/nouveau/kms: Avoid a hang entering KDB with VT accel on. radeon, kdb, kms: Save and restore the LUT on atomic KMS enter/exit drm, kdb, kms: Add an enter argument to mode_set_base_atomic() API drm/nouveau/kms: Implement KDB debug hooks for nouveau KMS. drm/radeon/kms: Implement KDB debug hooks for radeon KMS.
2010-10-06Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into ↵Dave Airlie
drm-core-next [airlied - add fix for vmwgfx build] * 'nouveau/for-airlied' of ../drm-nouveau-next: (93 commits) drm/ttm: restructure to allow driver to plug in alternate memory manager drm/ttm: introduce utility function to free an allocated memory node drm/nouveau: fix thinkos in mem timing table recordlen check drm/nouveau: parse voltage from perf 0x40 entires drm/nouveau: don't use the default pll limits in table v2.1 on nv50+ cards drm/nv50: Fix large 3D performance regression caused by the interchannel sync patches. drm/nouveau: Synchronize buffer object moves in hardware. drm/nouveau: Use semaphores to handle inter-channel sync in hardware. drm/nouveau: Provide a means to have arbitrary work run on fence completion. drm/nouveau: Minor refactoring/cleanup of the fence code. drm/nouveau: Add a module option to force card POST. drm/nv50: prevent (IB_PUT == IB_GET) for occurring unless idle drm/nv0x-nv4x: Leave the 0x40 bit untouched when changing CRE_LCD. drm/nv30-nv40: Fix postdivider mask when writing engine/memory PLLs. drm/nouveau: Fix perf table parsing on BMP v5.25. drm/nouveau: fix required mode bandwidth calculation for DP drm/nouveau: fix typo in c2aa91afea5f7e7ae4530fabd37414a79c03328c drm/nva3: split pm backend out from nv50 drm/nouveau: run perflvl and M table scripts on mem clock change drm/nouveau: pass perflvl struct to clock_pre() ...
2010-10-05ASoC: Update links for Wolfson MAINTAINERS entryMark Brown
We also have a separate git for audio, and a generic page for all of our drivers not just the PMICs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-05ASoC: Add Dimitris Papastamos to Wolfson maintainersMark Brown
Add Dimitris Papastamos as a contact for Wolfson device drivers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2010-10-06drm/nouveau/kms: Avoid a hang entering KDB with VT accel on.Chris Ball
Francisco Jerez advises that pre-nv20 cards would hang if we entered kdb with accel on and IRQs disabled, so we now disable accel before entering kdb and re-enable it on the way back out. Reported-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06radeon, kdb, kms: Save and restore the LUT on atomic KMS enter/exitJason Wessel
When changing VTs non-atomically the kernel works in conjunction with the Xserver in user space and receives the LUT information from the Xserver via a system call. When changing modes atomically for kdb, this information must be saved and restored without disturbing user space as if nothing ever happened. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: David Airlie <airlied@linux.ie> CC: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm, kdb, kms: Add an enter argument to mode_set_base_atomic() APIJason Wessel
Some devices such as the radeon chips receive information from user space which needs to be saved when executing an atomic mode set operation, else the user space would have to be queried again for the information. This patch extends the mode_set_base_atomic() call to pass an argument to indicate if this is an entry or an exit from an atomic kernel mode set change. Individual drm drivers can properly save and restore state accordingly. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: David Airlie <airlied@linux.ie> CC: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/nouveau/kms: Implement KDB debug hooks for nouveau KMS.Chris Ball
Tested on nv50 and nv04 HW. Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: Implement KDB debug hooks for radeon KMS.Chris Ball
Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06Merge branch 'drm-vmware-next' into drm-core-nextDave Airlie
* drm-vmware-next: drm/vmwgfx: Bump minor and driver date drm/vmwgfx: Save at least one screen layout drm/vmwgfx: Add modinfo version drm/vmwgfx: Add a parameter to get the max fb size drm/vmwgfx: Don't flush fb if we're in the suspended state. drm/vmwgfx: Prune modes based on available VRAM size drm/vmwgfx: Take the ttm lock around the dirty ioctl drm: vmwgfx: Add a struct drm_file parameter to the dirty framebuffer callback drm/vmwgfx: Add new-style PM hooks to improve hibernation behavior drm/vmwgfx: Fix ACPI S3 & S4 functionality. drm/vmwgfx: Really support other depths than 32
2010-10-06drm/radeon/kms: add drm blit support for evergreenAlex Deucher
This patch implements blit support for bo moves using the 3D engine. It uses the same method as r6xx/r7xx: - store the base state in an IB - emit variable state and vertex buffers to do the blit This allows the hw to move bos using the 3D engine and allows full use of vram beyond the pci aperture size. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon: Modify radeon_pm_in_vbl to use radeon_get_crtc_scanoutpos()Mario Kleiner
radeon_pm_in_vbl() didn't report in vblank status accurately. Make it a wrapper around radeon_get_crtc_scanoutpos() which corrects for biases, so it reports accurately. radeon_pm_in_vbl() will only report in_vbl if all active crtc's are currently inside vblank. agd5f: use rdev->num_crtc rather than hardcoding the crtc count Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon: Add function for display scanout position query.Mario Kleiner
radeon_get_crtc_scanoutpos() returns the current horizontal and vertical scanout position of a crtc. It also reports if the display scanout is currently inside the vblank area. hpos reports current horizontal pixel scanout position. vpos reports the current scanned out line as a value >= 0 in active scanout. If the scanout is inside vblank area, it reports a negative value, the number of scanlines until end of vblank aka start of active scanout, e.g., -3 == "At most 3 scanlines until end of vblank". This code is derived from radeon_pm_in_vbl(), tested on R500 and R600. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: rework spread spectrum handlingAlex Deucher
This patch reworks spread spectrum handling to enable it properly on lvds and DP/eDP links. It also fixes several bugs in the old spread spectrum code. - Use the ss recommended reference divider if available when calculating the pll - Use the proper ss command tables on pre-DCE3 asics - Avoid reading past the end of the ss info tables - Enable ss on evergreen asics (lvds, dp, tmds) - Enable ss on DP/eDP links Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: remove new pll algoAlex Deucher
The recent changes to the old algo (prefer high post div) coupled with the range and precision limitations of using fixed point with the new algo make the new algo less useful. So drop the new algo. This should work as well or better than the old new/old combinations and simplifies the code a lot. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30218 among others. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: remove some pll algo flagsAlex Deucher
These shouldn't be needed with the post div changes in the last patch. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: prefer high post dividers in legacy pll algoAlex Deucher
the hw prefers higher post dividers Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon/kms: properly handle 40 bit MC addresses in the cursor codeAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-06drm/radeon: add properties to configure the width of the underscan bordersMarius Gröger
This allows for a more exact fitting on the physical display. The new properties default to zero which corresponds to the previous underscan border width[height] formula: (display_width[display_width] >> 5) + 16. Example to set a horizontal border width of 30 and a vertikal border height of 22: xrandr --output HDMI-0 --set underscan on --set "underscan hborder" 30 --set "underscan vborder" 22 Signed-off-by: Marius Gröger <marius.groeger@googlemail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-23 14:27:31 +0000