summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-22bdi: Fix warnings in __mark_inode_dirty for /dev/zero and friendsJan Kara
Inodes of devices such as /dev/zero can get dirty for example via utime(2) syscall or due to atime update. Backing device of such inodes (zero_bdi, etc.) is however unable to handle dirty inodes and thus __mark_inode_dirty complains. In fact, inode should be rather dirtied against backing device of the filesystem holding it. This is generally a good rule except for filesystems such as 'bdev' or 'mtd_inodefs'. Inodes in these pseudofilesystems are referenced from ordinary filesystem inodes and carry mapping with real data of the device. Thus for these inodes we have to use inode->i_mapping->backing_dev_info as we did so far. We distinguish these filesystems by checking whether sb->s_bdi points to a non-trivial backing device or not. Example: Assume we have an ext3 filesystem on /dev/sda1 mounted on /. There's a device inode A described by a path "/dev/sdb" on this filesystem. This inode will be dirtied against backing device "8:0" after this patch. bdev filesystem contains block device inode B coupled with our inode A. When someone modifies a page of /dev/sdb, it's B that gets dirtied and the dirtying happens against the backing device "8:16". Thus both inodes get filed to a correct bdi list. Cc: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-22char: Mark /dev/zero and /dev/kmem as not capable of writebackJan Kara
These devices don't do any writeback but their device inodes still can get dirty so mark bdi appropriately so that bdi code does the right thing and files inodes to lists of bdi carrying the device inodes. Cc: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-22bdi: Initialize noop_backing_dev_info properlyJan Kara
Properly initialize this backing dev info so that writeback code does not barf when getting to it e.g. via sb->s_bdi. Cc: stable@kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-21sparc: Prevent no-handler signal syscall restart recursion.David S. Miller
Explicitly clear the "in-syscall" bit when we have no signal handler and back up the program counters to back up the system call. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21sparc: Don't mask signal when we can't setup signal frame.David S. Miller
Don't invoke the signal handler tracehook in that situation either. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-22drm/ttm: Clear the ghost cpu_writers flag on ttm_buffer_object_transfer.Francisco Jerez
It makes sense for a BO to move after a process has requested exclusive RW access on it (e.g. because the BO used to be located in unmappable VRAM and we intercepted the CPU access from the fault handler). If we let the ghost object inherit cpu_writers from the original object, ttm_bo_release_list() will raise a kernel BUG when the ghost object is destroyed. This can be reproduced with the nouveau driver on nv5x. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-22drm/radeon: don't allow device to be opened if powered downDave Airlie
If the switcheroo has switched the device off, don't let X open it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-09-21Merge branch 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux: i2c-omap: Make sure i2c bus is free before setting it to idle
2010-09-21fs: {lock,unlock}_flocks() stubs to prepare for BKL removalSage Weil
The lock structs are currently protected by the BKL, but are accessed by code in fs/locks.c and misc file system and DLM code. These stubs will allow all users to switch to the new interface before the implementation is changed to a spinlock. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-22i2c-omap: Make sure i2c bus is free before setting it to idleMathias Nyman
If the i2c bus receives an interrupt with both BB (bus busy) and ARDY (register access ready) statuses set during the tranfer of the last message the bus was put to idle while still busy. This caused bus to timeout. Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-09-21ip: fix truesize mismatch in ip fragmentationEric Dumazet
Special care should be taken when slow path is hit in ip_fragment() : When walking through frags, we transfert truesize ownership from skb to frags. Then if we hit a slow_path condition, we must undo this or risk uncharging frags->truesize twice, and in the end, having negative socket sk_wmem_alloc counter, or even freeing socket sooner than expected. Many thanks to Nick Bowler, who provided a very clean bug report and test program. Thanks to Jarek for reviewing my first patch and providing a V2 While Nick bisection pointed to commit 2b85a34e911 (net: No more expensive sock_hold()/sock_put() on each tx), underlying bug is older (2.6.12-rc5) A side effect is to extend work done in commit b2722b1c3a893e (ip_fragment: also adjust skb->truesize for packets not owned by a socket) to ipv6 as well. Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com> Tested-by: Nick Bowler <nbowler@elliptictech.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jarek Poplawski <jarkao2@gmail.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/aAdam Jackson
Commit 9eecabcb9a924f1e11ba670365fd4babe423045c ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space") uses a bunch of magic numbers. Provide #defines for those to make it look slightly saner. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-21intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT spaceDavid Woodhouse
Yet another BIOS bug; Lenovo this time (X201). Red Hat bug #593516. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-21Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix nohz balance kick sched: Fix user time incorrectly accounted as system time on 32-bit
2010-09-21Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hw breakpoints: Fix pid namespace bug x86: Fix instruction breakpoint encoding oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540) kprobes: Fix Kconfig dependency
2010-09-21netxen: dont set skb->truesizeEric Dumazet
skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21qlcnic: dont set skb->truesizeEric Dumazet
skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-09-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: select CRYPTO ceph: check mapping to determine if FILE_CACHE cap is used ceph: only send one flushsnap per cap_snap per mds session ceph: fix cap_snap and realm split ceph: stop sending FLUSHSNAPs when we hit a dirty capsnap ceph: correctly set 'follows' in flushsnap messages ceph: fix dn offset during readdir_prepopulate ceph: fix file offset wrapping at 4GB on 32-bit archs ceph: fix reconnect encoding for old servers ceph: fix pagelist kunmap tail ceph: fix null pointer deref on anon root dentry release
2010-09-21Merge branch 'drm-intel-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: Hold a reference to the object whilst unbinding the eviction list drm/i915,agp/intel: Add second set of PCI-IDs for B43 drm/i915: Fix Sandybridge fence registers drm/i915/crt: Downgrade warnings for hotplug failures drm/i915: Ensure that the crtcinfo is populated during mode_fixup()
2010-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY. virtio: console: Prevent userspace from submitting NULL buffers virtio: console: Fix poll blocking even though there is data to read
2010-09-21x86, setup: Fix earlyprintk=serial,0x3f8,115200Yinghai Lu
earlyprintk can take and I/O port, so we need to handle this case in the setup code too, otherwise 0x3f8 will be treated as a baud rate. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4C7B05A6.4010801@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-21x86, setup: Fix earlyprintk=serial,ttyS0,115200Yinghai Lu
Torsten reported that there is garbage output, after commit 8fee13a48e4879fba57725f6d9513df4bfa8e9f3 (x86, setup: enable early console output from the decompressor) It turns out we missed the offset for that case. Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4C7B0578.8090807@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-21drm/i915: Don't overwrite the returned error-codeChris Wilson
During i915_gem_create_mmap_offset() if the subsystem reports an error code, use it. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21drm/i915/lvds: Unlock the PP register when panel-fittingChris Wilson
As we do not wait for the panel to turn off when we need to adjust the panel-fitting registers we also need to unlock the PLLs as with the non-pfit update path. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21sched: Fix nohz balance kickSuresh Siddha
There's a situation where the nohz balancer will try to wake itself: cpu-x is idle which is also ilb_cpu got a scheduler tick during idle and the nohz_kick_needed() in trigger_load_balance() checks for rq_x->nr_running which might not be zero (because of someone waking a task on this rq etc) and this leads to the situation of the cpu-x sending a kick to itself. And this can cause a lockup. Avoid this by not marking ourself eligible for kicking. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1284400941.2684.19.camel@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-09-21drm/i915: Use the correct DPB GMBUS port for GPIOEChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21drm/i915: Drop crtc->fb pin on disable.Chris Wilson
In order to handle disable_functions() where the framebuffer is decoupled from the crtc we need to unpin the fb in order to prevent a leak. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857 Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21drm/i915: Disable output polling across suspend & resumeChris Wilson
Suspending (especially hibernating) may take a finite amount of time, during which a hotplug event may trigger and we will attempt to handle it with inconsistent state. Disable hotplug polling around suspend and resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30070 Reported-by: Rui Tiago Matos <tiagomatos@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt add a cleanup function for chipset specific stuffDaniel Vetter
The old code didn't clean up the i830 chipset flush page. And it looks nicer. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: store the dma mask size in intel_gtt_driverDaniel Vetter
Storing this explicitly makes for clearer code and hopefully less further confusion. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: clean up gtt size reportingDaniel Vetter
Consolidate everything in intel-gtt.c and also kill the export of intel_max_stolen. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21agp: kill agp_(unmap|map)_memoryDaniel Vetter
DMA remapping was only used by the intel-gtt driver. With that code now folded into the driver, kill the agp generic support for it. Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: consolidate fake_agp driver structsDaniel Vetter
They're now all the same. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: move chipset flush to the gtt driver structDaniel Vetter
This is the last differentiator between the different fake agp drivers. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: kill mask_memory functionsDaniel Vetter
That indirection mess can now go. Add a dummy i81x gtt_driver to avoid a NULL pointer check. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: generic (insert|remove)_entries for sandybridgeDaniel Vetter
Like before, but now with the added bonus of being able to kill quite a bit of no-longer userful code (the old dmar support stuff). Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: generic (insert|remove)_entries for g33/i965Daniel Vetter
Like for the i915. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: generic (insert|remove)_entries for i915Daniel Vetter
Beef up the generic version to support dmar. Otherwise like for the i830. v2: Don't try to DMA remap on resume for already remapped pages. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: generic (insert|remove)_entries for i830Daniel Vetter
Well, not all too generic because it does not yet support dmar. Add a new function check_flags to ensure that non-gem code does not try to screw us over. v2: Beautify i830_check_flags with an idea from Chris Wilson. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21agp: kill agp_(map|unmap)_pageDaniel Vetter
Only used to remap the scratch page. Now that intel-gtt does this itself, kill the support code. Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: drop agp scratch page support stuffDaniel Vetter
intel-gtt.c now handles the scratch page itself, so drop all that was just there to support it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: introduce pte write function for gen6Daniel Vetter
Like for i830. intel_i9xx_configure is now unused, so kill it. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: introduce pte write function for g33/i965/gm45Daniel Vetter
Like for the i830. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: introduce pte write function for i8xx/i915/i945Daniel Vetter
And put it to use in the gtt configuration code that writes the scratch page addr in all gtt ptes. This makes intel_i830_configure generic, hence rename it to intel_fake_agp_configure. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21intel-gtt: initialize our own scratch pageDaniel Vetter
The intel gtt fake agp driver is the only agp driver to use dma address remapping. So it makes sense to fold this code back into the only user (and thus reduce the reliance on the agp code). This patch does the first step by initializing (and remapping) the scratch page in a new function intel_gtt_setup_scratch_page. Unfortunately intel_gtt_cleanup had to move to avoid a forward declaration. The new scratch page is not yet used, though. v2: Refactor out scratch page teardown. Suggested by Chris Wilson on irc. This makes it clear what's going on and results in a nice symmetry between setup and teardown. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21drm/i915: Track pinned objectsChris Wilson
Keep a list of pinned objects and display it via debugfs. Now all objects that exist in the GTT are always tracked on one of the active, flushing, inactive or pinned lists. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21drm/i915: Drain any pending flips on the fb prior to unpinningChris Wilson
If we have queued a page flip on the current fb and then request a mode change, wait until the page flip completes before performing the new request. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21drm/i915: Merge ring flushing and lazy requestsChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21oprofile: Add Support for Intel CPU Family 6 / Model 29Jiri Olsa
This patch adds CPU type detection for dunnington processor (Family 6 / Model 29) to be identified as core 2 family cpu type (wikipedia source). I tested oprofile on Intel(R) Xeon(R) CPU E7440 reporting itself as model 29, and it runs without an issue. Spec: http://www.intel.com/Assets/en_US/PDF/specupdate/320336.pdf Signed-off-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Robert Richter <robert.richter@amd.com>
generated by cgit (git 2.34.1) at 2025-10-03 13:31:40 +0000