summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-06-29arm64: dts: juno: Add cache-level property to L2 cachesSudeep Holla
Add the missing cache-level property to L2 caches. This is needed if we need to find the last level cache directly from the device tree cache node. Link: https://lore.kernel.org/r/20220629095959.1115587-1-sudeep.holla@arm.com Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-06-28dt-bindings: arm: qcom: document sda660 SoC and ifc6560 boardDmitry Baryshkov
Add binding documentation for the Inforce IFC6560 board which uses Snapdragon SDA660. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-11-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm660: move SDHC2 card detect pinconf to board filesDmitry Baryshkov
This results in dts duplication, but per mutual agreement card detect pin configuration belongs to the board files. Move it from the SoC dtsi to the board DT files. Suggested-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-10-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm636-sony-xperia-ganges-mermaid: correct sdc2 pinconfDmitry Baryshkov
Fix the device tree node in the &sdc2_state_on override. The sdm630 uses 'clk' rather than 'pinconf-clk'. Fixes: 4c1d849ec047 ("arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsi") Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-9-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm630: fix gpu's interconnect pathDmitry Baryshkov
ICC path for the GPU incorrectly states <&gnoc 1 &bimc 5>, which is a path from SLAVE_GNOC_BIMC to SLAVE_EBI. According to the downstream kernel sources, the GPU uses MASTER_OXILI here, which is equivalent to <&bimc 1 ...>. While we are at it, use defined names instead of the numbers for this interconnect path. Fixes: 5cf69dcbec8b ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration") Reported-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-8-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm630: add second (HS) USB host supportDmitry Baryshkov
Add DT entries for the second DWC3 USB host, which is limited to the USB2.0 (HighSpeed), and the corresponding QUSB PHY. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-7-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm630: rename qusb2phy to qusb2phy0Dmitry Baryshkov
In preparation to adding second USB host/PHY pair, change first USB PHY's label to qusb2phy0. Suggested-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-6-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm630: fix the qusb2phy ref clockDmitry Baryshkov
According to the downstram DT file, the qusb2phy ref clock should be GCC_RX0_USB2_CLKREF_CLK, not GCC_RX1_USB2_CLKREF_CLK. Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration") Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-5-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm630: disable GPU by defaultDmitry Baryshkov
The SoC's device tree file disables gpucc and adreno's SMMU by default. So let's disable the GPU too. Moreover it looks like SMMU might be not usable without additional patches (which means that GPU is unusable too). No board uses GPU at this moment. Fixes: 5cf69dcbec8b ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration") Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-4-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm660: disable dsi1/dsi1_phy by defaultDmitry Baryshkov
Follow the typical practice and keep DSI1/DSI1 PHY disabled by default. They should be enabled in the board DT files. No existing boards use them at this moment. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-3-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: sdm630: disable dsi0/dsi0_phy by defaultDmitry Baryshkov
Follow the typical practice and keep DSI0/DSI0 PHY disabled by default. They should be enabled in the board DT files. No existing boards use them at this moment. Suggested-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220521202708.1509308-2-dmitry.baryshkov@linaro.org
2022-06-28arm64: dts: qcom: correct interrupt controller on PM8916 and PMS405Krzysztof Kozlowski
The PM8916 and PMS405 PMIC GPIOs are interrupt controllers, as described in the bindings and used by the driver. Drop the interrupts (apparently copied from downstream tree), just like in commit 61d2ca503d0b ("arm64: dts: qcom: fix pm8150 gpio interrupts"): qcs404-evb-4000.dtb: gpio@c000: 'interrupts' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' qcs404-evb-4000.dtb: gpio@c000: 'interrupt-controller' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220508135932.132378-4-krzysztof.kozlowski@linaro.org
2022-06-28arm64: dts: qcom: add missing gpio-ranges in PMIC GPIOsKrzysztof Kozlowski
The new Qualcomm PMIC GPIO bindings require gpio-ranges property: sm8250-sony-xperia-edo-pdx203.dtb: gpio@c000: 'gpio-ranges' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220508135932.132378-3-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: sdm630: order interrupts according to bindingsKrzysztof Kozlowski
The CAMSS DTSI device node, which came after the bindings were merged, got the interrupts ordered differently then specified in the bindings: sdm630-sony-xperia-nile-pioneer.dtb: camss@ca00000: interrupt-names:0: 'csid0' was expected Reordering them to match bindings should not cause ABI issues, because the driver relies on names, not ordering. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220509144714.144154-4-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: sdm630: order regs according to bindingsKrzysztof Kozlowski
The CAMSS DTSI device node, which came after the bindings were merged, got the regs ordered differently then specified in the bindings: sdm636-sony-xperia-ganges-mermaid.dtb: camss@ca00000: reg-names:0: 'csi_clk_mux' was expected Reordering them to match bindings should not cause ABI issues, because the driver relies on names, not ordering. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220509144714.144154-3-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: sdm630: order clocks according to bindingsKrzysztof Kozlowski
The CAMSS DTSI device node, which came after the bindings were merged, got the clocks ordered differently then specified in the bindings: sdm636-sony-xperia-ganges-mermaid.dtb: camss@ca00000: reg-names:4: 'csid3' was expected Reordering them to match bindings should not cause ABI issues, because the driver relies on names, not ordering. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220509144714.144154-2-krzysztof.kozlowski@linaro.org
2022-06-27ARM: dts: qcom: add missing gpio-ranges in PMIC GPIOsKrzysztof Kozlowski
The new Qualcomm PMIC GPIO bindings require gpio-ranges property: qcom-sdx55-telit-fn980-tlb.dtb: gpio@c000: 'gpio-ranges' is a required property Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220508135932.132378-5-krzysztof.kozlowski@linaro.org
2022-06-27ARM: dts: qcom: pmx65: add fallback compatible to PMIC GPIOKrzysztof Kozlowski
The bindings require all PMIC GPIO nodes to have two compatibles - specific followed by SPMI or SSBI fallback. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-12-krzysztof.kozlowski@linaro.org
2022-06-27ARM: dts: qcom: mdm9615: add missing PMIC GPIO regKrzysztof Kozlowski
'reg' property is required in SSBI children: qcom-mdm9615-wp8548-mangoh-green.dtb: gpio@150: 'reg' is a required property Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-11-krzysztof.kozlowski@linaro.org
2022-06-27ARM: dts: qcom: align PMIC GPIO pin configuration with DT schemaKrzysztof Kozlowski
DT schema expects PMIC GPIO pin configuration nodes to be named with '-state' suffix. Optional children should be either 'pinconf' or followed with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-10-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: msm8994-msft-lumia-octagon: add PM8994 pin propertiesKrzysztof Kozlowski
The bindings require that every pin configuration comes with 'function' property. There is also no 'drive-strength' property but 'qcom,drive-strength': msm8994-msft-lumia-octagon-cityman.dtb: gpios@c000: amsel-high-state: 'oneOf' conditional failed, one must be fixed: 'drive-strength' does not match any of the regexes: 'pinctrl-[0-9]+' 'bias-pull-up', 'drive-strength', 'function', 'pins' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-9-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: apq8096-db820c: add PM8994 pin functionKrzysztof Kozlowski
The bindings require that every pin configuration comes with 'function' property. Add such to PM8994 GPIO5. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-8-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: add fallback compatible to PMIC GPIOsKrzysztof Kozlowski
The bindings require all PMIC GPIO nodes to have two compatibles - specific followed by SPMI or SSBI fallback. Add the fallback to fix warnings like: msm8916-samsung-serranove.dtb: gpios@c000: compatible: ['qcom,pm8916-gpio'] is too short Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-7-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: align PMIC GPIO pin configuration with DT schemaKrzysztof Kozlowski
DT schema expects PMIC GPIO pin configuration nodes to be named with '-state' suffix. Optional children should be either 'pinconf' or followed with '-pins' suffix. This fixes dtbs_check warnings like: sdm845-xiaomi-beryllium.dtb: gpios@c000: 'vol-up-active' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220507194913.261121-6-krzysztof.kozlowski@linaro.org
2022-06-27arm64: dts: qcom: sdm845-akatsuki: Round down l22a regulator voltageMarijn Suijten
2700000 is not a multiple of pmic4_pldo's step size of 8000 (with base voltage 1664000), resulting in pm8998-rpmh-regulators not probing. Just as we did with MSM8998's Sony Yoshino Poplar [1], round the voltages down to err on the cautious side and leave a comment in place to document this discrepancy wrt downstream sources. [1]: https://lore.kernel.org/linux-arm-msm/20220507153627.1478268-1-marijn.suijten@somainline.org/ Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220620211212.269956-1-marijn.suijten@somainline.org
2022-06-27ARM: dts: qcom: sdx65: Add Watchdog supportRohit Agarwal
Enable Watchdog support for Application Processor Subsystem (APSS) block on SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-11-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add pshold supportRohit Agarwal
Add support for pshold block to drive pshold towards the PMIC, which is used to trigger a configurable event such as reboot or poweroff of the SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-12-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65-mtp: Enable modemRohit Agarwal
Enable modem on SDX65 MTP board. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-8-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add Modem remoteproc nodeRohit Agarwal
Add modem support to SDX65 using the PAS remoteproc driver. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-7-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add SCM nodeRohit Agarwal
Add SCM node to enable SCM functionality on SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-6-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add IMEM and PIL info regionRohit Agarwal
Add a simple-mfd representing IMEM on SDX65 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteproc. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-4-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add modem SMP2P nodeRohit Agarwal
Add SMP2P nodes for the SDX65 platform to communicate with the modem. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-3-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add CPUFreq supportRohit Agarwal
Add CPUFreq support to SDX65 platform using the cpufreq-dt driver. There is no dedicated hardware block available on this platform to carry on the CPUFreq duties. Hence, it is accomplished using the CPU clock and regulators tied together by the operating points table. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1654080312-5408-2-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND supportKaushal Kumar
Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651511286-18690-5-git-send-email-quic_kaushalk@quicinc.com
2022-06-27ARM: dts: qcom: sdx65-mtp: Enable QPIC BAM supportKaushal Kumar
Enable QPIC BAM devicetree node for Qualcomm SDX65-MTP board. While at it, sort the blsp1_uart3 node in alphabetical order and set it's status as "okay". Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651511286-18690-4-git-send-email-quic_kaushalk@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add QPIC NAND supportKaushal Kumar
Add devicetree node to enable support for QPIC NAND controller on Qualcomm SDX65 platform. Since there is no "aon" clock in SDX65, a dummy clock is provided. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651511286-18690-3-git-send-email-quic_kaushalk@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add QPIC BAM supportKaushal Kumar
Add devicetree node to enable support for QPIC BAM DMA controller on Qualcomm SDX65 platform. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651511286-18690-2-git-send-email-quic_kaushalk@quicinc.com
2022-06-27ARM: dts: qcom: sdx65-mtp: Enable USB3 and PHY supportRohit Agarwal
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX65 MTP. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651482395-29443-5-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add USB3 and PHY supportRohit Agarwal
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and SNPS HS PHY on SDX65. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651482395-29443-4-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add interconnect nodesRohit Agarwal
Add interconnect devicetree nodes in SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> [bjorn: Sorted nodes] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651482395-29443-2-git-send-email-quic_rohiagar@quicinc.com
2022-06-27ARM: dts: qcom: sdx65: Add Shared memory manager supportRohit Agarwal
Add smem node to support shared memory manager on SDX65 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1651480665-14978-5-git-send-email-quic_rohiagar@quicinc.com
2022-06-27arm64: dts: qcom: msm8996: Add SDHCI resetsKonrad Dybcio
On MSM8996, the default bootloader configuration leaves the hosts in some weird state that never allows them to function properly under Linux. Add the hardware resets so that we can start clean and get them actually working. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162642.608106-1-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8996-tone: Rule out PM(I)8994 variantsKonrad Dybcio
It looks like all Tone devices out in the wild are using PMI8996, which suggests the PMI8994-variant DTs are not needed. Remove them. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162525.607946-1-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8996-tone: Drop cont_splash_mem regionKonrad Dybcio
Tone does not have a functioning bootloader framebuffer and Linux allocates the DRM framebuffer dynamically. Free up 36 MiB of precious RAM by removing this reservation. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162319.607629-1-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998-mtp: Merge and fix up the DTKonrad Dybcio
Merge the two DT files into one, sort the nodes and fix up a couple of style incoherencies by adding some newlines, removing some, sorting properties etc. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-14-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998-fxtec: Decouple from 8998 MTPKonrad Dybcio
While the Pro-1 is based on MTP and is very close to it, it's really not great for it to include the MTP dtsi straight up, as any small change will affect both boards and not all of them will apply to the phone as well. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-13-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998*: Clean up #includesKonrad Dybcio
Sort the includes and remove unused ones. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-12-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998-oneplus: Add clocks & GDSC to simplefbKonrad Dybcio
This is required to keep the display working with MMCC enabled until proper panel support is in place. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-11-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998*: Keep MMCC & MMSS_SMMU enabled by defaultKonrad Dybcio
MMCC is a component of the SoC that should always be configured. It was kept off due to misconfiguration on clamshell machines. Keep it disabled on these ones and enable it by default on all the others. Exactly the same story applies to MMSS_SMMU, which directly depends on MMCC. Do note, that if a platform doesn't use neither EFIFB (only applies to WoA devices in this case) or simplefb (applies to precisely 2 msm8998 devices as of this commit), this will not cause any harm. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-10-konrad.dybcio@somainline.org
2022-06-27arm64: dts: qcom: msm8998-fxtec: Use "okay" instead of "ok"Konrad Dybcio
This is the standard way. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220430162353.607709-9-konrad.dybcio@somainline.org
generated by cgit (git 2.34.1) at 2025-09-30 17:22:23 +0000