| Age | Commit message (Collapse) | Author |
|---|
|
The chip IDs are not used by the driver. Drop them. Use driver data to
store the limit register resolution instead, and use this information
when writing temperature limits to improve chip specific rounding and
to avoid writing into unused register bits.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Simplify driver maintenance by reordering files to alphabetic order.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Checking three configuration register bits and the manufacturer ID
register to auto-detect LM92 is a bit vague. Repeat twice on replicated
register addresses to improve detection accuracy. Check the manufacturer
ID first and bail out immediately without reading the other register if
there is a mismatch to reduce the number of i2c transfers needed in that
case. Also explicitly test for an error from reading the configuration
register to avoid potential situations where the returned error masked
against 0xe0 is 0.
While at it, drop "lm92: Found National Semiconductor LM92 chip" detection
noise.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240731191312.1710417-13-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Bail out immediately if reading any of the registers used for chip
detection fails, or if it returns an unexpected value. Drop all log
messages from detection code.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The chip supports reading and writing the conversion rate.
Add support for the update_interval sysfs attribute.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert driver to with_info hwmon API to simplify the code and
with it its maintainability.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use regmap for local caching, to hide register read/write address
differences, and for multi-byte operations. With this change,
the driver specific lock is no longer necessary.
While at it, check errors seen when initializing the chip and bail out
if chip initialization fails.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Bit 0, 5, and 6 in the status register are reserved and, if set, do not
indicate an alarm. Bit 7 is the 'busy' bit and also does not indicate
an alarm. Mask the non-alarm bits to avoid reporting them to userspace.
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Simplify maintenance by reordering include files to alphabetic order.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Module test code reports underflows when writing sensor limits.
temp2_min: Suspected underflow: [min=-77000, read 101000, written -2147483648]
temp2_max: Suspected underflow: [min=-77000, read 101000, written -2147483648]
temp2_crit: Suspected underflow: [min=-77000, read 101000, written -2147483648]
Clamp temperature ranges when writing limits to fix the problem.
While at it, use sign_extend32() when reading temperatures to make
the code easier to understand.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In the MAX6581 datasheet Revision 0 to 3, the local channel overtemperature
status is reported in bit 6 of register 0x45, and the overtemperature
status for remote channel 7 is reported in bit 7. In Revision 4 and later,
the local channel overtemperature status is reported in bit 7, and the
remote channel 7 overtemperature status is reported in bit 6. A real
chip was found to match the functionality documented in Revision 4 and
later.
The code was fixed with commit 1ea3fd1eb986 ("hwmon: (max6697) Fix swapped
temp{1,8} critical alarms"). At that time it looked like this was an
original bug. It only turned out later that the problem was the result of
incorrect information in the chip datasheet.
Document the discrepancy to avoid confusion caused by old versions of the
datasheet.
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert to use with_info API to simplify the code and to reduce its size.
This patch reduces object file size by approximately 25%.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The only difference between supported chips is the number of channels.
Drop enum chips and list the number of channels in struct i2c_device_id
directly.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use regmap for caching to simplify the code and to hide read/write
register address differences.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use bit macro to make the code easier to understand and reduce duplication.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Reorder include files to alphabetic order to simplify driver maintenance.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
RMP -> RPM
Signed-off-by: Cryolitia PukNgae <Cryolitia@gmail.com>
Link: https://lore.kernel.org/r/20240726-typo-v1-1-3ca3f07f93e9@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use the device property APIs so the driver does not depend on OF to
work.
While at it, properly include mod_devicetable for struct of_device_id
and fix some parameter alignment in the changed places.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240726-dev-hwmon-ltc6947-fw-agnostic-v1-1-f7d6cab7d438@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
By default the PWM duty cycle in hardware is 100%. On some systems this
can cause unwanted fan noise. Add the ability to specify the fan
connections and initial state of the PWMs via device properties.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20240722221737.3407958-4-chris.packham@alliedtelesis.co.nz
[groeck: Cleaned up formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Now that we have fan child nodes that can specify flags for the PWM
outputs we no longer need the adi,pwm-active-state property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240722221737.3407958-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add fan child nodes that allow describing the connections for the
ADT7475 to the fans it controls. This also allows setting some
initial values for the pwm duty cycle and frequency.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240722221737.3407958-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
MAX6581 supports setting the minimum temperature as well as minimum
temperature alarms. Add support for it.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert to with_info hwmon API to simplify the code and reduce its size.
This patch reduces object file size by approximately 25%.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use regmap for register caching, and use regmap API for bit operations
to simplify the code.
This patch reduces object file size by approximately 10%.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use bit operations to improve code maintainability.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Platform data is not used anywhere in the upstram kernel.
Drop support for it to simplify code maintenance.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Reorder include files to alphabetic order to improve maintainability.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Chips reporting overcurrent alarms report it in the second alarm register.
That means the second alarm register has to be read, even if the chip only
supports 8 or fewer ADC channels.
MAX16067 and MAX16068 report undervoltage and overvoltage alarms in
separate registers. Fold register contents together to report both with
the existing alarm attribute. This requires actually storing the chip type
in struct max16065_data. Rename the variable 'chip' to match the variable
name used in the probe function.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Writing large limits resulted in overflows as reported by module tests.
in0_lcrit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_crit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_min: Suspected overflow: [max=5538, read 0, written 2147483647]
Fix the problem by clamping prior to multiplications and the use of
DIV_ROUND_CLOSEST, and by using consistent variable types.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
In this case, the child nodes are not required outside the loop, and
the scoped version of the macro can be used to remove the repetitive
`goto put` pattern.
Use `device_for_each_child_node_scoped_scoped()` to indicate device's
direct child nodes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240721-device_for_each_child_node-available-v2-2-f33748fd8b2d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the Dell Latitude 7320 to the fan control whitelist to allow
for manual fan control.
Closes: https://github.com/Wer-Wolf/i8kutils/issues/8
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240719203706.19466-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations to simplify the code
and to reduce dependency on locking.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
LM95233/LM95234 support enabling temperature channels one by one.
Add support for tempX_enable attribute to be able to use that
functionality.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Convert to with_info API to simplify the code and reduce its size.
This patch reduces the object file size by about 30%.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use regmap to replace local caching and to be able to use regmap API
functions.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use find_closest() instead of manually coding it to find best update
interval.
Since find_closest() uses rounding to find the best match, the resulting
update interval will now reflect the update interval that is closest to
the requested value, not the value that is lower or equal to the requested
value.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Alphabetic include file order simplifies maintenance and makes it easier
to add or remove files.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional changes.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Use multi-byte regmap operations where possible to reduce code size
and the need for mutex protection.
No functional change.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix RPM package build error caused by an incorrect locale setup
- Mark modules.weakdep as ghost in RPM package
- Fix the odd combination of -S and -c in stack protector scripts,
which is an error with the latest Clang
* tag 'kbuild-fixes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix '-S -c' in x86 stack protector scripts
kbuild: rpm-pkg: ghost modules.weakdep file
kbuild: rpm-pkg: Fix C locale setup
|
|
This simplifies the min_t() and max_t() macros by no longer making them
work in the context of a C constant expression.
That means that you can no longer use them for static initializers or
for array sizes in type definitions, but there were only a couple of
such uses, and all of them were converted (famous last words) to use
MIN_T/MAX_T instead.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant
expressions in VM code") added the simpler MIN_T/MAX_T macros in order
to avoid some excessive expansion from the rather complicated regular
min/max macros.
The complexity of those macros stems from two issues:
(a) trying to use them in situations that require a C constant
expression (in static initializers and for array sizes)
(b) the type sanity checking
and MIN_T/MAX_T avoids both of these issues.
Now, in the whole (long) discussion about all this, it was pointed out
that the whole type sanity checking is entirely unnecessary for
min_t/max_t which get a fixed type that the comparison is done in.
But that still leaves min_t/max_t unnecessarily complicated due to
worries about the C constant expression case.
However, it turns out that there really aren't very many cases that use
min_t/max_t for this, and we can just force-convert those.
This does exactly that.
Which in turn will then allow for much simpler implementations of
min_t()/max_t(). All the usual "macros in all upper case will evaluate
the arguments multiple times" rules apply.
We should do all the same things for the regular min/max() vs MIN/MAX()
cases, but that has the added complexity of various drivers defining
their own local versions of MIN/MAX, so that needs another level of
fixes first.
Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
