| Age | Commit message (Collapse) | Author |
|---|
|
Don't ignore return values from ext4_ext_dirty, since the errors
indicate valid failures below Ext4. In all of the other instances of
ext4_ext_dirty calls, the error return value is handled in some
way. This patch makes those remaining couple of places to handle
ext4_ext_dirty errors as well. In case of ext4_split_extent_at(), the
ignorance of return value is intentional. The reason is that we are
already in error path and there isn't much we can do if ext4_ext_dirty
returns error. This patch adds a comment for that case explaining why
we ignore the return value.
In the longer run, we probably should
make sure that errors from other mark_dirty routines are handled as
well.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200427013438.219117-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return
value may lead ext4 to ignore real failures that would result in
corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail
as soon as possible and return errors to the caller whenever
appropriate.
One of the possible scnearios when this bug could affected is that
while creating a new inode, its directory entry gets added
successfully but while writing the inode itself mark_inode_dirty
returns error which is ignored. This would result in inconsistency
that the directory entry points to a non-existent inode.
Ran gce-xfstests smoke tests and verified that there were no
regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Don't pass error pointers to brelse().
commit 7159a986b420 ("ext4: fix some error pointer dereferences") has fixed
some cases, fix the remaining one case.
Once ext4_xattr_block_find()->ext4_sb_bread() failed, error pointer is
stored in @bs->bh, which will be passed to brelse() in the cleanup
routine of ext4_xattr_set_handle(). This will then cause a NULL panic
crash in __brelse().
BUG: unable to handle kernel NULL pointer dereference at 000000000000005b
RIP: 0010:__brelse+0x1b/0x50
Call Trace:
ext4_xattr_set_handle+0x163/0x5d0
ext4_xattr_set+0x95/0x110
__vfs_setxattr+0x6b/0x80
__vfs_setxattr_noperm+0x68/0x1b0
vfs_setxattr+0xa0/0xb0
setxattr+0x12c/0x1a0
path_setxattr+0x8d/0xc0
__x64_sys_setxattr+0x27/0x30
do_syscall_64+0x60/0x250
entry_SYSCALL_64_after_hwframe+0x49/0xbe
In this case, @bs->bh stores '-EIO' actually.
Fixes: fb265c9cb49e ("ext4: add ext4_sb_bread() to disambiguate ENOMEM cases")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: stable@kernel.org # 2.6.19
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1587628004-95123-1-git-send-email-jefflexu@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When we are evicting inode with journalled data, we may race with
transaction commit in the following way:
CPU0 CPU1
jbd2_journal_commit_transaction() evict(inode)
inode_io_list_del()
inode_wait_for_writeback()
process BJ_Forget list
__jbd2_journal_insert_checkpoint()
__jbd2_journal_refile_buffer()
__jbd2_journal_unfile_buffer()
if (test_clear_buffer_jbddirty(bh))
mark_buffer_dirty(bh)
__mark_inode_dirty(inode)
ext4_evict_inode(inode)
frees the inode
This results in use-after-free issues in the writeback code (or
the assertion added in the previous commit triggering).
Fix the problem by removing inode from writeback lists once all the page
cache is evicted and so inode cannot be added to writeback lists again.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200421085445.5731-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Ext4 needs to remove inode from writeback lists after it is out of
visibility of its journalling machinery (which can still dirty the
inode). Export inode_io_list_del() for it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200421085445.5731-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
ext4_orphan_get() invokes ext4_read_inode_bitmap(), which returns a
reference of the specified buffer_head object to "bitmap_bh" with
increased refcnt.
When ext4_orphan_get() returns, local variable "bitmap_bh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
ext4_orphan_get(). When ext4_iget() fails, the function forgets to
decrease the refcnt increased by ext4_read_inode_bitmap(), causing a
refcnt leak.
Fix this issue by calling brelse() when ext4_iget() fails.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/1587618568-13418-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If eh->eh_max is 0, EXT_MAX_EXTENT/INDEX would evaluate to unsigned
(-1) resulting in illegal memory accesses. Although there is no
consistent repro, we see that generic/019 sometimes crashes because of
this bug.
Ran gce-xfstests smoke and verified that there were no regressions.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20200421023959.20879-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Fix the following coccicheck warning:
fs/ext4/extents_status.c:1057:5-28: WARNING: Comparison to bool
fs/ext4/inode.c:2314:18-24: WARNING: Comparison to bool
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200420042918.19459-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As new ext4_map_blocks() flags have been added, not all have gotten flag
bit to string translations to make tracepoint output more readable.
Fix that, and go one step further by adding a translation for the
EXT4_EX_NOCACHE flag as well. The EXT4_EX_FORCE_CACHE flag can never
be set in a tracepoint in the current code, so there's no need to
bother with a translation for it right now.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200415203140.30349-3-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The eofblocks code was removed in the 5.7 release by "ext4: remove
EOFBLOCKS_FL and associated code" (4337ecd1fe99). The ext4_map_blocks()
flag used to trigger it can now be removed as well.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200415203140.30349-2-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Fixed an if statement where braces were not needed.
Link: https://lore.kernel.org/r/20200416141456.1089-1-carlosteniswarrior@gmail.com
Signed-off-by: Carlos Guerrero Álvarez <carlosteniswarrior@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
|
|
Update the document to reflect ext4 and xfs now behave the same.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-10-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Add a flag ([EXT4|FS]_DAX_FL) to preserve FS_XFLAG_DAX in the ext4
inode.
Set the flag to be user visible and changeable. Set the flag to be
inherited. Allow applications to change the flag at any time except if
it conflicts with the set of mutually exclusive flags (Currently VERITY,
ENCRYPT, JOURNAL_DATA).
Furthermore, restrict setting any of the exclusive flags if DAX is set.
While conceptually possible, we do not allow setting EXT4_DAX_FL while
at the same time clearing exclusion flags (or vice versa) for 2 reasons:
1) The DAX flag does not take effect immediately which
introduces quite a bit of complexity
2) There is no clear use case for being this flexible
Finally, on regular files, flag the inode to not be cached to facilitate
changing S_DAX on the next creation of the inode.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-9-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The jflag variable serves almost no purpose. Remove it.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-8-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We add 'always', 'never', and 'inode' (default). '-o dax' continues to
operate the same which is equivalent to 'always'. This new
functionality is limited to ext4 only.
Specifically we introduce a 2nd DAX mount flag EXT4_MOUNT2_DAX_NEVER and set
it and EXT4_MOUNT_DAX_ALWAYS appropriately for the mode.
We also force EXT4_MOUNT2_DAX_NEVER if !CONFIG_FS_DAX.
Finally, EXT4_MOUNT2_DAX_INODE is used solely to detect if the user
specified that option for printing.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-7-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
To prevent complications with in memory inodes we only set S_DAX on
inode load. FS_XFLAG_DAX can be changed at any time and S_DAX will
change after inode eviction and reload.
Add init bool to ext4_set_inode_flags() to indicate if the inode is
being newly initialized.
Assert that S_DAX is not set on an inode which is just being loaded.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-6-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
S_DAX should only be enabled when the underlying block device supports
dax.
Cache the underlying support for DAX in the super block and modify
ext4_should_use_dax() to check for device support prior to the over
riding mount option.
While we are at it change the function to ext4_should_enable_dax() as
this better reflects the ask as well as matches xfs.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-5-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In prep for the new tri-state mount option which then introduces
EXT4_MOUNT_DAX_NEVER.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-4-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Verity and DAX are incompatible. Changing the DAX mode due to a verity
flag change is wrong without a corresponding address_space_operations
update.
Make the 2 options mutually exclusive by returning an error if DAX was
set first.
(Setting DAX is already disabled if Verity is set first.)
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-3-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When preventing DAX and journaling on an inode. Use the effective DAX
check rather than the mount option.
This will be required to support per inode DAX flags.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200528150003.828793-2-ira.weiny@intel.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We can use the ext4_has_feature_bigalloc() function directly to check
bigalloc feature and the variable has_bigalloc is reduncant, so remove
it.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/1586935542-29588-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
DCACHE_DONTCACHE indicates a dentry should not be cached on final
dput().
Also add a helper function to mark DCACHE_DONTCACHE on all dentries
pointing to a specific inode when that inode is being set I_DONTCACHE.
This facilitates dropping dentry references to inodes sooner which
require eviction to swap S_DAX mode.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
DAX effective mode (S_DAX) changes requires inode eviction.
XFS has an advisory flag (XFS_IDONTCACHE) to prevent caching of the
inode if no other additional references are taken. We lift this flag to
the VFS layer and change the behavior slightly by allowing the flag to
remain even if multiple references are taken.
This will expedite the eviction of inodes to change S_DAX.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The DIOREAD_NOLOCK flag has been cleared when doing the test_opt
that is meaningless, so remove the unnecessary test_opt for DIOREAD_NOLOCK.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1586751862-19437-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Update the Usage section to reflect the new individual dax selection
functionality.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
In order for users to determine if a file is currently operating in DAX
state (effective DAX). Define a statx attribute value and set that
attribute if the effective DAX flag is set.
To go along with this we propose the following addition to the statx man
page:
STATX_ATTR_DAX
The file is in the DAX (cpu direct access) state. DAX state
attempts to minimize software cache effects for both I/O and
memory mappings of this file. It requires a file system which
has been configured to support DAX.
DAX generally assumes all accesses are via cpu load / store
instructions which can minimize overhead for small accesses, but
may adversely affect cpu utilization for large transfers.
File I/O is done directly to/from user-space buffers and memory
mapped I/O may be performed with direct memory mappings that
bypass kernel page cache.
While the DAX property tends to result in data being transferred
synchronously, it does not give the same guarantees of O_SYNC
where data and the necessary metadata are transferred together.
A DAX file may support being mapped with the MAP_SYNC flag,
which enables a program to use CPU cache flush instructions to
persist CPU store operations without an explicit fsync(2). See
mmap(2) for more information.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Remove the check because DAX now has it's own read/write methods and
file systems which support DAX check IS_DAX() prior to IOCB_DIRECT on
their own. Therefore, it does not matter if the file state is DAX when
the iocb flags are created.
Also remove io_is_direct() as it is just a simple flag check.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A few more stability fixes, minor build warning fixes and git url
fixup:
- fix partial loss of prealloc extent past i_size after fsync
- fix potential deadlock due to wrong transaction handle passing via
journal_info
- fix gcc 4.8 struct intialization warning
- update git URL in MAINTAINERS entry"
* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
MAINTAINERS: btrfs: fix git repo URL
btrfs: fix gcc-4.8 build warning for struct initializer
btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
btrfs: fix partial loss of prealloc extent past i_size after fsync
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a memory leak when dev_iommu gets freed and a sub-pointer does
not
- Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
driver
- Export iommu_group_get_for_dev() only for GPLed modules
- Fix AMD IOMMU interrupt remapping when x2apic is enabled
- Fix error path in the QCOM IOMMU driver probe function
* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Fix local_base status check
iommu: Properly export iommu_group_get_for_dev()
iommu/vt-d: Use right Kconfig option name
iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
iommu/mediatek: Fix MTK_IOMMU dependencies
iommu: Fix the memory leak in dev_iommu_free()
|
|
The git repo listed for btrfs hasn't been updated in over a year.
List the current one instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- prevent the intel_pstate driver from printing excessive diagnostic
messages in some cases (Chris Wilson)
- make the hibernation restore kernel freeze kernel threads as well as
user space tasks (Dexuan Cui)
- fix the ACPI device PM disagnostic messages to include the correct
power state name (Kai-Heng Feng).
* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: ACPI: Output correct message on target power state
PM: hibernate: Freeze kernel threads in software_resume()
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
|
|
* pm-cpufreq:
cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
* pm-sleep:
PM: hibernate: Freeze kernel threads in software_resume()
|
|
Pull iomap fix from Darrick Wong:
"Hoist the check for an unrepresentable FIBMAP return value into
ioctl_fibmap.
The internal kernel function can handle 64-bit values (and is needed
to fix a regression on ext4 + jbd2). It is only the userspace ioctl
that is so old that it cannot deal"
* tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fibmap: Warn and return an error in case of block > INT_MAX
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- fix handling of backchannel binding in BIND_CONN_TO_SESSION
Bugfixes:
- Fix a credential use-after-free issue in pnfs_roc()
- Fix potential posix_acl refcnt leak in nfs3_set_acl
- defer slow parts of rpc_free_client() to a workqueue
- Fix an Oopsable race in __nfs_list_for_each_server()
- Fix trace point use-after-free race
- Regression: the RDMA client no longer responds to server disconnect
requests
- Fix return values of xdr_stream_encode_item_{present, absent}
- _pnfs_return_layout() must always wait for layoutreturn completion
Cleanups:
- Remove unreachable error conditions"
* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race in __nfs_list_for_each_server()
NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
NFSv4: Remove unreachable error condition due to rpc_run_task()
SUNRPC: Remove unreachable error condition
xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
xprtrdma: Fix trace point use-after-free race
xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Core:
- Documentation typo fixes
- fix the channel indexes
- dmatest: fixes for process hang and iterations
Drivers:
- hisilicon: build error fix without PCI_MSI
- ti-k3: deadlock fix
- uniphier-xdmac: fix for reg region
- pch: fix data race
- tegra: fix clock state"
* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dmatest: Fix process hang when reading 'wait' parameter
dmaengine: dmatest: Fix iteration non-stop logic
dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
dmaengine: fix channel index enumeration
dmaengine: mmp_tdma: Reset channel error on release
dmaengine: mmp_tdma: Do not ignore slave config validation errors
dmaengine: pch_dma.c: Avoid data race between probe and irq handler
dt-bindings: dma: uniphier-xdmac: switch to single reg region
include/linux/dmaengine: Typos fixes in API documentation
dmaengine: xilinx_dma: Add missing check for empty list
dmaengine: ti: k3-psil: fix deadlock on error path
dmaengine: hisilicon: Fix build error without PCI_MSI
|
|
Pull VFIO fixes from Alex Williamson:
- copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)
- Fix a potential math overflow (Yan Zhao)
- Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)
* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
vfio: checking of validity of user vaddr in vfio_dma_rw
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Add -fasynchronous-unwind-tables to the vDSO CFLAGS"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vdso: Add -fasynchronous-unwind-tables to cflags
|
|
Pull io_uring fixes from Jens Axboe:
- Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail
- Cover a few cases where async poll can handle retry, eliminating the
need for an async thread
- fallback request busy/free fix (Bijan)
- syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)
- Fix extra put of req for sync_file_range (Pavel)
- Always punt splice async. We'll improve this for 5.8, but wanted to
eliminate the inode mutex lock from the non-blocking path for 5.7
(Pavel)
* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
io_uring: punt splice async because of inode mutex
io_uring: check non-sync defer_list carefully
io_uring: fix extra put in sync_file_range()
io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
io_uring: use proper references for fallback_req locking
io_uring: only force async punt if poll based retry can't handle it
io_uring: enable poll retry for any file with ->read_iter / ->write_iter
io_uring: statx must grab the file table for valid fd
|
|
Pull block fixes from Jens Axboe:
"A few fixes for this release:
- NVMe pull request from Christoph, with a single fix for a double
free in the namespace error handling.
- Kill the bd_openers check in blk_drop_partitions(), fixing a
regression in this merge window (Christoph)"
* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
block: remove the bd_openers checks in blk_drop_partitions
nvme: prevent double free in nvme_alloc_ns() error handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes, and two reverts because the original patches
revealed underlying problems which the Tegra guys are now working on"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Avoid i2c interrupt status clear race condition.
i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
Revert "i2c: tegra: Synchronize DMA before termination"
i2c: iproc: generate stop event for slave writes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a collection of small fixes around this time:
- One more try for fixing PCM OSS regression
- HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
a lock fix in the minor error path, and a fix for the possible race
at monitor notifiaction
- USB-audio: a quirk ID fix, a fix for POD HD500 workaround"
* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
ALSA: opti9xx: shut up gcc-10 range warning
ALSA: hda/hdmi: fix without unlocked before return
ALSA: hda/hdmi: fix race in monitor detection during probe
ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
ALSA: line6: Fix POD HD500 audio playback
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
ALSA: hda: Match both PCI ID and SSID for driver blacklist
|
|
Pull drm fixes from Dave Airlie:
"Regular scheduled fixes for graphics. Nothing to extreme bunch of
amdgpu fixes, i915 and qxl fixes, along with some misc ones.
All seems to be progressing normally.
core:
- EDID off by one DTD fix
- DP mst write return code fix
dma-buf:
- fix SET_NAME ioctl uapi
- doc fixes
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
- (uapi) Add additional DCC tiling flags for navi1x
i915:
- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is
valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
qxl:
- use after gree fix
- fix lost kunmap
- release leak fix
virtio:
- context destruction fix"
* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
dma-buf: fix documentation build warnings
drm/qxl: qxl_release use after free
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
drm/i915: Use proper fault mask in interrupt postinstall too
drm/amd/display: Use cursor locking to prevent flip delays
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
drm/amd/display: Defer cursor update around VUPDATE for all ASIC
drm/amd/display: fix rn soc bb update
drm/amd/display: check if REFCLK_CNTL register is present
drm/amdgpu: bump version for invalidate L2 before SDMA IBs
drm/amdgpu: invalidate L2 before SDMA IBs (v2)
drm/amdgpu: add tiling flags from Mesa
drm/amd/powerplay: avoid using pm_en before it is initialized revised
Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
drm/virtio: only destroy created contexts
drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
drm/i915/gt: Check cacheline is valid before acquiring
drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four minor fixes: three in drivers and one in the core.
The core one allows an additional state change that fixes a regression
introduced by an update to the aacraid driver in the previous merge
window"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target/iblock: fix WRITE SAME zeroing
scsi: qla2xxx: check UNLOADING before posting async work
scsi: qla2xxx: set UNLOADING before waiting for session deletion
scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK
|
|
Nonblocking do_splice() still may wait for some time on an inode mutex.
Let's play safe and always punt it async.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_req_defer() do double-checked locking. Use proper helpers for that,
i.e. list_empty_careful().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
[ 40.179474] refcount_t: underflow; use-after-free.
[ 40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
...
[ 40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0
[ 40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6
[ 40.179619] RSP: 0018:ffffb252423ebe18 EFLAGS: 00010286
[ 40.179623] RAX: 0000000000000000 RBX: ffff98d65e929400 RCX: 0000000000000000
[ 40.179625] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 00000000ffffffff
[ 40.179627] RBP: ffffb252423ebe18 R08: 0000000000000001 R09: 000000000000055d
[ 40.179629] R10: 0000000000000c8c R11: 0000000000000001 R12: 0000000000000000
[ 40.179631] R13: ffff98d68c434400 R14: ffff98d6a9cbaa20 R15: ffff98d6a609ccb8
[ 40.179634] FS: 0000000000000000(0000) GS:ffff98d6af580000(0000) knlGS:0000000000000000
[ 40.179636] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 40.179638] CR2: 00000000033e3194 CR3: 000000006480a003 CR4: 00000000003606e0
[ 40.179641] Call Trace:
[ 40.179652] io_put_req+0x36/0x40
[ 40.179657] io_free_work+0x15/0x20
[ 40.179661] io_worker_handle_work+0x2f5/0x480
[ 40.179667] io_wqe_worker+0x2a9/0x360
[ 40.179674] ? _raw_spin_unlock_irqrestore+0x24/0x40
[ 40.179681] kthread+0x12c/0x170
[ 40.179685] ? io_worker_handle_work+0x480/0x480
[ 40.179690] ? kthread_park+0x90/0x90
[ 40.179695] ret_from_fork+0x35/0x40
[ 40.179702] ---[ end trace 85027405f00110aa ]---
Opcode handler must never put submission ref, but that's what
io_sync_file_range_finish() do. use io_steal_work() there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.
Fixes: 0ae349a0f33f ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In commit a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to
permit modular drivers") a bunch of iommu symbols were exported, all
with _GPL markings except iommu_group_get_for_dev(). That export should
also be _GPL like the others.
Fixes: a7ba5c3d008d ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The CONFIG_ prefix should be added in the code.
Fixes: 046182525db61 ("iommu/vt-d: Add Kconfig option to enable/disable scalable mode")
Reported-and-tested-by: Kumar, Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200501072427.14265-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
