| Age | Commit message (Collapse) | Author |
|---|
|
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with this, fix the following warning:
drivers/xen/pci.c:48:55: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Message-ID: <ZsU58MvoYEEqBHZl@elsanto>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-8-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-7-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Simplify error handling (less gotos) over locks with guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-6-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use dev_err_probe() to make defer code handling simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-5-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-4-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-3-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Simplify error handling (smaller error handling) over locks with
guard().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-2-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scoped for_each_available_child_of_node_scoped() and
for_each_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-cleanup-h-guard-pm-domain-v1-1-8320722eaf39@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use scope based of_node_put() to simplify the code logic, and we don't
need to call of_node_put(). This will simplify the code a lot.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240821034022.27394-3-zhangzekun11@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
for_each_available_child_of_node() can help to iterate through the
device_node, and we don't need to use while loop. Besides, the purpose
of the while loop is to find a device_node which fits the condition
"child_req_np == ref_np", we can just read the property of "child_np"
directly in for_each_available_child_of_node(). No functional change
with such conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240821034022.27394-2-zhangzekun11@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: Add multi queue RX support
am65-cpsw can support up to 8 queues at Rx. So far we have
been using only one queue (i.e. default flow) for all RX traffic.
This series adds multi-queue support. The driver starts with
1 RX queue by default. User can increase the RX queues via ethtool,
e.g. 'ethtool -L ethx rx <N>'
The series also adds regmap and regfield support to some of the
ALE registers. It adds Policer/Classifier registers and fields.
Converting the existing ALE control APIs to regfields can be a separate
exercise.
Some helper functions are added to read/write to the Policer/Classifier
registers and a default Classifier setup function is added that
routes packets based on their PCP/DSCP priority to different RX queues.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
Changes in v4:
- Use single macro AM65_CPSW_MAX_QUEUES for both TX and RX queues
to simplify code
- reuse am65_cpsw_get/set_per_queue_coalesce for am65_cpsw_get/set_coalesce.
- return -EINVAL if unsupported tx/rx_coalesce_usecs in
am65_cpsw_set_coalesce.
- reverse Xmas tree declaration order fixes in cpsw_ale
- Link to v3: https://lore.kernel.org/r/20240703-am65-cpsw-multi-rx-v3-0-f11cd860fd72@kernel.org
Changes in v3:
- code style fixes
- squashed patches 5 and 6
- added comment about priority to thread mapping table.
- Added Reviewed-by Simon Horman.
- Link to v2: https://lore.kernel.org/r/20240628-am65-cpsw-multi-rx-v2-0-c399cb77db56@kernel.org
Changes in v2:
- rebase to net/next
- fixed RX stall issue during iperf
- Link to v1: https://lore.kernel.org/r/20240606-am65-cpsw-multi-rx-v1-0-0704b0cb6fdc@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that we support multiple RX queues, enable default priority
to flow mapping so that higher priority packets come on higher
channels (flows).
The Classifier checks for PCP/DSCP priority in the packet and
routes them to the appropriate flow.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Policer registers in the ALE register space are just shadow registers
and use an index field in the policer table control register to read/write
to the actual Polier registers.
Add helper functions to Read and Write to Policer registers.
Also add a helper function to set the thread value to classifier/policer
mapping. Any packet that first matches the classifier will be sent to the
thread (flow) that is set in the classifier to thread mapping table.
If not set then it goes to the default flow.
Default behaviour is to have 8 classifiers to map 8 DSCP/PCP
priorities to N receive threads (flows). N depends on number of
RX channels enabled for the port.
As per the standard [1] User prioritie 1 (Background) and 2 (Spare) have
lower priority than the user priority 0 (default). User priority 1 being
of the lowest priority.
[1] IEEE802.1D-2004, IEEE Standard for Local and metropolitan area networks
Table G-2 - Traffic type acronyms
Table G-3 - Defining traffic types
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds regfileds for Policer registers and Thread mapping/control registers.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use regfields for number of ALE Entries and Policers.
The variants that support Policers/Classifiers have the number
of policers encoded in the ALE_STATUS register.
Use that and show the number of Policers in the ALE info message.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Map the entire ALE registerspace using regmap.
Add regfields for Major and Minor Version fields.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
am65-cpsw can support up to 8 queues at Rx.
Use a macro AM65_CPSW_MAX_RX_QUEUES to indicate that.
As there is only one DMA channel for RX traffic, the
8 queues come as 8 flows in that channel.
By default, we will start with 1 flow as defined by the
macro AM65_CPSW_DEFAULT_RX_CHN_FLOWS.
User can change the number of flows by ethtool like so
'ethtool -L ethx rx <N>'
All traffic will still come on flow 0. To get traffic on
different flows the Classifiers will need to be set up.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge kmem_cache_create() refactoring by Christian Brauner.
Note this includes a merge of the vfs.file tree that contains the
prerequisity kmem_cache_create_rcu() work.
|
|
Merge most of SLUB feature work for 6.12:
- Barrier for pending kfree_rcu() in kmem_cache_destroy() and associated
refactoring of the destroy path (Vlastimil Babka)
- CONFIG_SLUB_RCU_DEBUG to allow KASAN catching UAF bugs in
SLAB_TYPESAFE_BY_RCU caches (Jann Horn)
- kmem_cache_charge() for delayed kmemcg charging (Shakeel Butt)
|
|
As kmem_cache_create() became a _Generic() wrapper macro, it currently
has no kerneldoc despite being the main API to use. Add it. Also adjust
kmem_cache_create_usercopy() kerneldoc to indicate it is now a legacy
wrapper.
Also expand the kerneldoc for struct kmem_cache_args, especially for the
freeptr_offset field, where important details were removed with the
removal of kmem_cache_create_rcu().
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
|
|
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic.
Cc: <stable@vger.kernel.org>
Reported-by: Breno Leitao <leitao@debian.org>
Tested-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Add missing I915_FORMAT_MOD_4_TILED_BMG_CCS modifier for BMG
- Printk formatting fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZuKtfPJZ7vp79lWN@jlahtine-mobl.ger.corp.intel.com
|
|
The write code path touches the bbu member in a non atomic manner
without taking the spinlock. Fix it.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912132126.1034743-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As we process the second byte of a control transfer, transfers
of less than 2 bytes must be discarded.
This bug is as old as the driver.
SIgned-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912125449.1030536-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a small window during probing when IO is running
but the backlight is not registered. Processing events
during that time will crash. The completion handler
needs to check for a backlight before scheduling work.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912123317.1026049-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TIOCGSERIAL is an ioctl. Thus it must be atomic. It returns
two values. Racing with set_serial it can return an inconsistent
result. The mutex must be taken.
In terms of logic the bug is as old as the driver. In terms of
code it goes back to the conversion to the get_serial and
set_serial methods.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Fixes: 99f75a1fcd865 ("cdc-acm: switch to ->[sg]et_serial()")
Link: https://lore.kernel.org/r/20240912141916.1044393-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't populate the read-only const arrays fifoaddr, fifosel and fifoctr
on the stack at run time, instead make them static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240912132345.589397-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the busy indicator is set, all other fields in CCI should be
clear according to the spec. However, some UCSI implementations do
not follow this rule and report bogus data in CCI along with the
busy indicator. Ignore the contents of CCI if the busy indicator is
set.
If a command timeout is hit it is possible that the EVENT_PENDING
bit is cleared while connector work is still scheduled which can
cause the EVENT_PENDING bit to go out of sync with scheduled connector
work. Check and set the EVENT_PENDING bit on entry to
ucsi_handle_connector_change() to fix this.
Finally, check UCSI_CCI_BUSY before the return code of ->sync_control.
This ensures that the command is cancelled even if ->sync_control
returns an error (most likely -ETIMEDOUT).
Reported-by: Anurag Bijea <icaliberdev@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219108
Bisected-by: Christian Heusel <christian@heusel.eu>
Tested-by: Anurag Bijea <icaliberdev@gmail.com>
Fixes: de52aca4d9d5 ("usb: typec: ucsi: Never send a lone connector change ack")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240912074132.722855-1-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The __get_dwc3_maximum_speed() function returns an enum type which, in
this context here, is basically unsigned int. On error cases, it's
supposed to return USB_SPEED_UNKNOWN, but it was accidentally changed to
return negative error codes in commit f93e96c544ca ("usb: dwc3: rtk: use
scoped device node handling to simplify error paths").
There is only one caller and because of the way that the types work out,
returning negative error codes is not a problem. They will be treated
as greater than USB_SPEED_HIGH and ignored as invalid. So this patch
does not affect run time behavior, it's just a clean up.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/865e56dc-37cc-47b1-8d35-9047ecb1984a@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change bl_len from u16 to u32 to accommodate the necessary bit shifts.
Fix the following smatch warnings:
drivers/usb/storage/ene_ub6250.c:1509 ms_scsi_read_capacity() warn:
right shifting more than type allows 16 vs 24
drivers/usb/storage/ene_ub6250.c:1510 ms_scsi_read_capacity() warn:
right shifting more than type allows 16 vs 16
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240912145247.15544-1-abhishektamboli9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Improve commit fc88bb116179 ("usb: roles: add lockdep class key to struct
usb_role_switch") as follows:
* Move the lock class key declaration just above the mutex declaration such
that the declaration order of these objects matches their initialization
order.
* Destroy the mutex and lock class key just before these objects are
freed. This makes it easier to verify that the destruction calls happen
after the last use of these objects.
* Instead of switching the mutex key to the dynamic lock class key after
initialization of the mutex has completed, initialize the mutex with the
dynamic lock class key.
Cc: Amit Sunil Dhamne <amitsd@google.com>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223956.3554086-4-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following pattern occurs 5 times in kernel drivers:
lockdep_register_key(key);
__mutex_init(mutex, name, key);
In several cases the 'name' argument matches #mutex. Hence, introduce
the mutex_init_with_key() macro. This macro derives the 'name' argument
from the 'mutex' argument.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223956.3554086-3-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With CONFIG_PREEMPT_RT disabled __mutex_init() is a function. With
CONFIG_PREEMPT_RT enabled, __mutex_init() is a macro. I assume this is why
mutex_init() is defined twice as exactly the same macro.
Prepare for introducing a new macro for mutex initialization by combining
the two identical mutex_init() definitions into a single definition. This
patch does not change any functionality because the C preprocessor expands
macros when it encounters the macro name and not when a macro definition
is encountered. See also commit bb630f9f7a7d ("locking/rtmutex: Add mutex
variant for RT").
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240912223956.3554086-2-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable apTD1Rings to ap_td1_rings to fix checkpatch warning
Avoid CamelCase.
Signed-off-by: Xingquan Liu <b1n@b1n.io>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913012343.42579-2-b1n@b1n.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable apTD0Rings to ap_td0_rings to fix checkpatch warning
Avoid CamelCase.
Signed-off-by: Xingquan Liu <b1n@b1n.io>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913012343.42579-1-b1n@b1n.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'poll_cnt' is used to assist in polling hardware state. Current code
uses jiffies to determine timeout, so removing this value is safe.
Otherwise, clang warns:
core/rtw_pwrctrl.c:288:6: warning:
variable 'poll_cnt' set but not used [-Wunused-but-set-variable]
288 | u8 poll_cnt = 0;
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913002815.5149-5-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'cnt' is used to show how many pending frames are processed, and the
debug code has been removed, so removing 'cnt' is safe.
Otherwise, clang warns:
core/rtw_recv.c:2030:7: warning:
variable 'cnt' set but not used [-Wunused-but-set-variable]
2030 | int cnt = 0;
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913002815.5149-4-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The efuseValue is to store value from register EFUSE_CTRL, and set control
bits including address and write bit. This is no need for RTL8723BS, so
the consumer has been removed. Thus, remove these unused codes are safe.
Otherwiese, clang warns:
rtw_efuse.c:285:6: warning:
variable 'efuseValue' set but not used [-Wunused-but-set-variable]
285 | u32 efuseValue;
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913002815.5149-3-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The drvinfo_sz is a size of hardware generated data putting in front of
real RX data. The functions r8712_rxcmd_event_hdl() and recvbuf2recvframe()
have its own parsing code to get drvinfo_sz to access real RX data, so
removing this unused drvinfo_sz is safe.
Otherwise, clang report:
rtl8712_recv.c:139:6: warning:
variable 'drvinfo_sz' set but not used [-Wunused-but-set-variable]
139 | u16 drvinfo_sz;
| ^
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240913002815.5149-2-pkshih@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is safer to put macro arguments in parentheses. This way, accidental
operator precedence issues can be avoided.
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240911180149.14474-1-dominik.karol.piatkowski@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change improves code readability and ensures consistent indentation.
Reported by `checkpatch.pl`:
WARNING: spaces should not be used before a tab for indentation.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-9-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change enhances readability and conforms to the standard commenting
style in the kernel.
Reported by `checkpatch.pl`:
WARNING: trailing `*/` should be on a separate line.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-8-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change improves code readability and maintains consistency with the
kernel's coding guidelines.
Reported by `checkpatch.pl`:
WARNING: please, no spaces at the start of a line
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-7-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change ensures consistent formatting of the struct declaration.
Improves code readability.
Reported by `checkpatch.pl`:
WARNING: please, no spaces at the start of a line
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-6-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change ensures that the code is properly indented and easy to follow.
Reported by `checkpatch.pl`:
WARNING: please, use tabs instead of spaces for indentation.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-5-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This improves code readability by ensuring consistent formatting.
Reported by `checkpatch.pl`:
WARNING: switch blocks should be indented with a single tab.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-4-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change ensures proper formatting for better readability and
maintainability.
Reported by `checkpatch.pl`:
WARNING: switch and case statements should be indented with tabs.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-3-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change improves code readability and consistency with the rest of
the kernel codebase.
Reported by `checkpatch.pl`:
WARNING: open brace '{' following function definitions or control
statements should be on the next line.
Signed-off-by: Sayyad Abid <sayyad.abid16@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240912040409.3315067-2-sayyad.abid16@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240912031731.2211698-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
