summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-23Bluetooth: hci_qca: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/hci_qca.c:1869:37: error: ‘qca_soc_data_wcn6750’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1853:37: error: ‘qca_soc_data_wcn3998’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1841:37: error: ‘qca_soc_data_wcn3991’ defined but not used [-Werror=unused-const-variable=] drivers/bluetooth/hci_qca.c:1830:37: error: ‘qca_soc_data_wcn3990’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btmrvl_sdio: mark OF related data as maybe unusedKrzysztof Kozlowski
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/bluetooth/btmrvl_sdio.c:43:34: error: ‘btmrvl_sdio_of_match_table’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_ll: drop of_match_ptr for ID tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/bluetooth/hci_ll.c:769:34: error: ‘hci_ti_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: L2CAP: Delay identity address updatesLuiz Augusto von Dentz
This delays the identity address updates to give time for userspace to process the new address otherwise there is a risk that userspace creates a duplicated device if the MGMT event is delayed for some reason. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_sync: Remove duplicate statementInga Stotland
This removes the following duplicate statement in hci_le_ext_directed_advertising_sync(): cp.own_addr_type = own_addr_type; Signed-off-by: Inga Stotland <inga.stotland@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Convert MSFT filter HCI cmd to hci_syncBrian Gix
The msft_set_filter_enable() command was using the deprecated hci_request mechanism rather than hci_sync. This caused the warning error: hci0: HCI_REQ-0xfcf0 Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_sync: Don't wait peer's reply when powering offArchie Pusaka
Currently, when we initiate disconnection, we will wait for the peer's reply unless when we are suspending, where we fire and forget the disconnect request. A similar case is when adapter is powering off. However, we still wait for the peer's reply in this case. Therefore, if the peer is unresponsive, the command will time out and the power off sequence will fail, causing "bluetooth powered on by itself" to users. This patch makes the host doesn't wait for the peer's reply when the disconnection reason is powering off. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: Add VID/PID 0489/e0e4 for MediaTek MT7922Meng Tang
Tested on Acer Nitro AN515-47 Notebook output from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0e4 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23arm64: dts: rockchip: Update compatible for bluetoothChris Morgan
Update the compatible for the Realtek RTL8821CS bluetooth node. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_h5: btrtl: Add support for RTL8821CSChris Morgan
RTL8821CS is a WiFi + Bluetooth combo chip from Realtek that provides WiFi A/B/G/N/AC over an SDIO interface and Bluetooth 4.2 over a UART interface. Note that the firmware this was tested with was firmware version 0x75b8f098. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23dt-bindings: net: realtek-bluetooth: Add RTL8821CSChris Morgan
Add compatible string for RTL8821CS for existing Realtek Bluetooth driver. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btusb: Add new PID/VID 04ca:3801 for MT7663Meng Tang
This bluetooth device is found in a combo WLAN/BT card for a MediaTek 7663. Tested on Acer Aspire A315-24P Notebook The device information: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3801 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Meng Tang <tangmeng@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_sync: Fix smatch warningLuiz Augusto von Dentz
This fixes the following new warning: net/bluetooth/hci_sync.c:2403 hci_pause_addr_resolution() warn: missing error code? 'err' Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202302251952.xryXOegd-lkp@intel.com/ Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_core: Make hci_conn_hash_add append to the listLuiz Augusto von Dentz
This makes hci_conn_hash_add append to the tail of the conn_hash so it matches the order they are created, this is required if the controller attempts to match the order of ACL with CIS which uses append logic when programming the CIS ids on the CIG. The result of this change affects Create CIS: Before: < HCI Command: LE Create Connected Isochronous Stream (0x08|0x0064) plen 9 Number of CIS: 2 CIS Handle: 2560 ACL Handle: 3586 CIS Handle: 2561 ACL Handle: 3585 After: < HCI Command: LE Create Connected Isochronous Stream (0x08|0x0064) plen 9 Number of CIS: 2 CIS Handle: 2560 ACL Handle: 3585 CIS Handle: 2561 ACL Handle: 3586 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btrtl: Add support for RTL8852BSVictor Hassan
Add the support for RTL8852BS BT controller on UART interface. The necessary firmware file will be submitted to linux-firmware. Signed-off-by: Victor Hassan <victor@allwinnertech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_mrvl: Add serdev support for 88W8997Stefan Eichenberger
Add serdev support for the 88W8997 from NXP (previously Marvell). It includes support for changing the baud rate. The command to change the baud rate is taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth interfaces) from NXP. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: hci_mrvl: use maybe_unused macro for device tree idsStefan Eichenberger
Use the maybe_unused macro for the device tree ids instead of #ifdef CONFIG_OF. This makes it easier to add support for new devices. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23dt-bindings: bluetooth: marvell: add max-speed propertyStefan Eichenberger
The 88W8997 bluetooth module supports setting the max-speed property. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23dt-bindings: bluetooth: marvell: add 88W8997Stefan Eichenberger
Update the documentation with the device tree binding for the Marvell 88W8997 bluetooth device. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: btusb: Do not require hardcoded interface numbersTomasz Moń
Remove hardcoded interface number check because Bluetooth specification since version 4.0 only recommends and no longer requires specific interface numbers. While earlier Bluetooth versions, i.e. 2.1 + EDR and 3.0 + HS, contain required configuration table in Volume 4 - Host Controller Interface Part B - USB Transport Layer, Bluetooth Core Specification Addendum 2 changes the table from required to recommended configuration. Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23Bluetooth: MGMT: Use BIT macro when defining bitfieldsLuiz Augusto von Dentz
This makes use of BIT macro when defining bitfields which makes it clearer what bit it is toggling. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-04-23cifs: Avoid a cast in add_lease_context()Volker Lendecke
We have the correctly-typed struct smb2_create_req * available in the caller. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by Ralph Boehme <slow@samba.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-23cifs: Simplify SMB2_open_init()Volker Lendecke
Reduce code duplication by calculating req->CreateContextsLength in one place. This is the last reference to "req" in the add_*_context functions, remove that parameter. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-23cifs: Simplify SMB2_open_init()Volker Lendecke
Reduce code duplication by stitching together create contexts in one place. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-23cifs: Simplify SMB2_open_init()Volker Lendecke
We can point to the create contexts in just one place, we don't have to do this in every add_*_context routine. Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-04-24Merge tag 'exynos-drm-next-for-v6.4-2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next A patch series for implementing fbdev emulation as in-kernel client. - This patch series refactors fbdev callbacks to DRM client functions and simplifies fbdev emulation initialization including some code cleanups. The changes make fbdev emulation behave like a regular DRM client. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230417100624.35229-1-inki.dae@samsung.com
2023-04-24firewire: init_ohci1394_dma: use correct function names in commentsRandy Dunlap
Prevent kernel-doc complaints by using the correct function names in kernel-doc comments: drivers/firewire/init_ohci1394_dma.c:258: warning: expecting prototype for debug_init_ohci1394_dma(). Prototype was for init_ohci1394_dma_on_all_controllers() instead drivers/firewire/init_ohci1394_dma.c:289: warning: expecting prototype for setup_init_ohci1394_early(). Prototype was for setup_ohci1394_dma() instead Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20230410011306.26268-1-rdunlap@infradead.org Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2023-04-24MAINTAINERS: replace maintainer of FireWire subsystemTakashi Sakamoto
In the last few years, I have reviewed patches for FireWire subsystem and requested sound subsystem maintainer to sent them to mainline, since FireWire subsystem maintainer has been long absent. This situation is not preferable since we have some user of sound hardware in IEEE 1394 bus. I will stand for the maintainer, and work for FireWire core functions and 1394 OHCI driver, as well as sound drivers. This commit replaces the corresponding entry. As you know, IEEE 1394 is enough legacy. I would like to schedule the end of my work in the subsystem. My effort will last next 6 years. In 2026, I will start strong announcement for users to migrate their work load from IEEE 1394 bus (e.g. by purchasing alternative devices in USB and hardening system for them), then in 2029 let me resign the maintainer and close Linux 1394 project. My current work focuses on real time data (sampling data) transmission protocol in packet-oriented communication, thus I would provide less help to implementations for the other type of protocol; i.e. IPv4/IPv6 over IEEE 1394 bus (firewire-net), SCSI transport protocol over IEEE 1394 bus (firewire-sbp2) and iSCSI target (sbp-target). If receiving few objections from developers, I will start my work to send fixes for v6.3 prepatch, and PR for future v6.4 or later. I'm pleased if getting any help until the end. Reference: commit b32744751e75 ("firewire: add to MAINTAINERS") Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230306035814.78455-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2023-04-24Merge tag 'drm-intel-next-fixes-2023-04-20-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Active port PLL MST fix for second stream, CSC plane index fix, null and oob array deref fixes and selftest memory leak fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZEDz9ZedyZVyFXxU@jlahtine-mobl.ger.corp.intel.com
2023-04-23ubifs: Fix memleak when insert_old_idx() failedZhihao Cheng
Following process will cause a memleak for copied up znode: dirty_cow_znode zn = copy_znode(c, znode); err = insert_old_idx(c, zbr->lnum, zbr->offs); if (unlikely(err)) return ERR_PTR(err); // No one refers to zn. Fetch a reproducer in [Link]. Function copy_znode() is split into 2 parts: resource allocation and znode replacement, insert_old_idx() is split in similar way, so resource cleanup could be done in error handling path without corrupting metadata(mem & disk). It's okay that old index inserting is put behind of add_idx_dirt(), old index is used in layout_leb_in_gaps(), so the two processes do not depend on each other. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705 Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Cc: stable@vger.kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2023-04-23Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path"Zhihao Cheng
This reverts commit 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak in error handling path). After commit 122deabfe1428 applied, if insert_old_idx() failed, old index neither exists in TNC nor in old-index tree. Which means that old index node could be overwritten in layout_leb_in_gaps(), then ubifs image will be corrupted in power-cut. Fixes: 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak ... path) Cc: stable@vger.kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2023-04-23cxl/mbox: Update CMD_RC_TABLEDavidlohr Bueso
As of CXL 3.0 there have some added return codes, update the driver accordingly. Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20230307042655.6714-1-dave@stgolabs.net Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23Merge branch 'for-6.3/cxl-autodetect-fixes' into for-6.4/cxlDan Williams
Pick up late v6.3 fixes for v6.4.
2023-04-23Merge branch 'for-6.4/cxl-poison' into for-6.4/cxlDan Williams
Include the poison list and injection infrastructure from Alison for v6.4.
2023-04-23tools/testing/cxl: Require CONFIG_DEBUG_FSAlison Schofield
The cxl_mem driver uses debugfs to support poison inject and clear. Add debugfs to the list of required symbols so that cxl_test can emulate those poison operations. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/4f3aab57fbf1cc3ccde2eb887c5d90566c8d0e90.1681874357.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23tools/testing/cxl: Add a sysfs attr to test poison inject limitsAlison Schofield
CXL devices may report a maximum number of addresses that a device allows to be poisoned using poison injection. When cxl_test creates mock CXL memory devices, it defaults to MOCK_INJECT_DEV_MAX==88 for all mocked memdevs. Add a sysfs attribute, poison_inject_max to module cxl_mock_mem so that users can set a custom device injection limit. Fail, and return -EBUSY, if the mock poison list is not empty. /sys/bus/platform/drivers/cxl_mock_mem/poison_inject_max A simple usage model is to set the attribute before running a test in order to emulate a device's poison handling. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/0f25b2862b90013545450222d2199e435c6cc11a.1681874357.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23tools/testing/cxl: Use injected poison for get poison listAlison Schofield
Prior to poison inject support, the mock of 'Get Poison List' returned a poison list containing a single mocked error record. Following the addition of poison inject and clear support to the mock driver, use the mock_poison_list[], rather than faking an error record. Mock_poison_list[] list tracks the actual poison inject and clear requests issued by userspace. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/0f4242c81821f4982b02cb1009c22783ef66b2f1.1681874357.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23tools/testing/cxl: Mock the Clear Poison mailbox commandAlison Schofield
Mock the clear of poison by deleting the device:address entry from the mock_poison_list[]. Behave like a real CXL device and do not fail if the address is not in the poison list, but offer a dev_dbg() message. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/ecf19743c6572e60971bbd078f67d520cf5bca5d.1681874357.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23tools/testing/cxl: Mock the Inject Poison mailbox commandAlison Schofield
Mock the injection of poison by storing the device:address entries in mock_poison_list[]. Enforce a limit of 8 poison injections per memdev device and 128 total entries for the cxl_test mock driver. Introducing the mock_poison[] list here, makes it available for use in the mock of Clear Poison, and the mock of Get Poison List. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/f6b7f03541eaa8c2260d3eafadd04afe3f0d7962.1681874357.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/mem: Add debugfs attributes for poison inject and clearAlison Schofield
Inject and Clear Poison commands are optionally supported by CXL memdev devices and are intended for use in debug environments only. Add debugfs attributes for user access. Documentation/ABI/testing/debugfs-cxl describes the usage. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/0c9ea8e671b8e58465d18722788b60d325c675c7.1681874357.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/memdev: Trace inject and clear poison as cxl_poison eventsAlison Schofield
The cxl_poison trace event allows users to view the history of poison list reads. With the addition of inject and clear poison capabilities, users will expect similar tracing. Add trace types 'Inject' and 'Clear' to the cxl_poison trace_event and trace successful operations only. If the driver finds that the DPA being injected or cleared of poison is mapped in a region, that region info is included in the cxl_poison trace event. Region reconfigurations can make this extra info useless if the debug operations are not carefully managed. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/e20eb7c3029137b480ece671998c183da0477e2e.1681874357.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23Linux 6.3v6.3Linus Torvalds
2023-04-23cxl/memdev: Warn of poison inject or clear to a mapped regionAlison Schofield
Inject and clear poison capabilities and intended for debug usage only. In order to be useful in debug environments, the driver needs to allow inject and clear operations on DPAs mapped in regions. dev_warn_once() when either operation occurs. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Link: https://lore.kernel.org/r/f911ca5277c9d0f9757b72d7e6842871bfff4fa2.1681874357.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/memdev: Add support for the Clear Poison mailbox commandAlison Schofield
CXL devices optionally support the CLEAR POISON mailbox command. Add memdev driver support for clearing poison. Per the CXL Specification (3.0 8.2.9.8.4.3), after receiving a valid clear poison request, the device removes the address from the device's Poison List and writes 0 (zero) for 64 bytes starting at address. If the device cannot clear poison from the address, it returns a permanent media error and -ENXIO is returned to the user. Additionally, and per the spec also, it is not an error to clear poison of an address that is not poisoned. If the address is not contained in the device's dpa resource, or is not 64 byte aligned, the driver returns -EINVAL without sending the command to the device. Poison clearing is intended for debug only and will be exposed to userspace through debugfs. Restrict compilation to CONFIG_DEBUG_FS. Implementation note: Although the CXL specification defines the clear command to accept 64 bytes of 'write-data', this implementation always uses zeroes as write-data. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/8682c30ec24bd9c45af5feccb04b02be51e58c0a.1681874357.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/memdev: Add support for the Inject Poison mailbox commandAlison Schofield
CXL devices optionally support the INJECT POISON mailbox command. Add memdev driver support for the mailbox command. Per the CXL Specification (3.0 8.2.9.8.4.2), after receiving a valid inject poison request, the device will return poison when the address is accessed through the CXL.mem driver. Injecting poison adds the address to the device's Poison List and the error source is set to Injected. In addition, the device adds a poison creation event to its internal Informational Event log, updates the Event Status register, and if configured, interrupts the host. Also, per the CXL Specification, it is not an error to inject poison into an address that already has poison present and no error is returned from the device. If the address is not contained in the device's dpa resource, or is not 64 byte aligned, return -EINVAL without issuing the mbox command. Poison injection is intended for debug only and will be exposed to userspace through debugfs. Restrict compilation to CONFIG_DEBUG_FS. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/241c64115e6bd2effed9c7a20b08b3908dd7be8f.1681874357.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23tools/testing/cxl: Mock support for Get Poison ListAlison Schofield
Make mock memdevs support the Get Poison List mailbox command. Return a fake poison error record when the get poison list command is issued. This supports testing the kernel tracing and cxl list capabilities for media errors. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/14d661ce3e3a32b7d8e76b8ecc5eb88343b3d09c.1681838292.git.alison.schofield@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/trace: Add an HPA to cxl_poison trace eventsAlison Schofield
When a cxl_poison trace event is reported for a region, the poisoned Device Physical Address (DPA) can be translated to a Host Physical Address (HPA) for consumption by user space. Translate and add the resulting HPA to the cxl_poison trace event. Follow the device decode logic as defined in the CXL Spec 3.0 Section 8.2.4.19.13. If no region currently maps the poison, assign ULLONG_MAX to the cxl_poison event hpa field. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/6d3cd726f9042a59902785b0a2cb3ddfb70e0219.1681838292.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/region: Provide region info to the cxl_poison trace eventAlison Schofield
User space may need to know which region, if any, maps the poison address(es) logged in a cxl_poison trace event. Since the mapping of DPAs (device physical addresses) to a region can change, the kernel must provide this information at the time the poison list is read. The event informs user space that at event <timestamp> this <region> mapped to this <DPA>, which is poisoned. The cxl_poison trace event is already wired up to log the region name and uuid if it receives param 'struct cxl_region'. In order to provide that cxl_region, add another method for gathering poison - by committed endpoint decoder mappings. This method is only available with CONFIG_CXL_REGION and is only used if a region actually maps the memdev where poison is being read. After the region driver reads the poison list for all the mapped resources, poison is read for any remaining unmapped resources. The default method remains: read the poison by memdev resource. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/438b01ccaa70592539e8eda4eb2b1d617ba03160.1681838292.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/memdev: Add trigger_poison_list sysfs attributeAlison Schofield
When a boolean 'true' is written to this attribute the memdev driver retrieves the poison list from the device. The list consists of addresses that are poisoned, or would result in poison if accessed, and the source of the poison. This attribute is only visible for devices supporting the capability. The retrieved errors are logged as kernel events when cxl_poison event tracing is enabled. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/1081cfdc8a349dc754779642d584707e56db26ba.1681838291.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-23cxl/trace: Add TRACE support for CXL media-error recordsAlison Schofield
CXL devices may support the retrieval of a device poison list. Add a new trace event that the CXL subsystem may use to log the media-error records returned in the poison list. Log each media-error record as a cxl_poison trace event of type 'List'. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/de6196f5269483d886ab1834744f82d27189a666.1681838291.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 01:54:25 +0000