| Age | Commit message (Collapse) | Author |
|---|
|
Despite the architecture spec requiring that reserved registers in the GIC
distributor memory map are RES0 (and thus are not allowed to generate
an exception), the Cavium ThunderX (aka TX1) SoC explodes as such:
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 128 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Internal error: synchronous external abort: 96000210 [#1] SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc4-00035-g3cf6a3d5725f #7956
[ 0.000000] Hardware name: cavium,thunder-88xx (DT)
[ 0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 0.000000] pc : __raw_readl+0x0/0x8
[ 0.000000] lr : gic_init_bases+0x110/0x560
[ 0.000000] sp : ffff800011243d90
[ 0.000000] x29: ffff800011243d90 x28: 0000000000000000
[ 0.000000] x27: 0000000000000018 x26: 0000000000000002
[ 0.000000] x25: ffff8000116f0000 x24: ffff000fbe6a2c80
[ 0.000000] x23: 0000000000000000 x22: ffff010fdc322b68
[ 0.000000] x21: ffff800010a7a208 x20: 00000000009b0404
[ 0.000000] x19: ffff80001124dad0 x18: 0000000000000010
[ 0.000000] x17: 000000004d8d492b x16: 00000000f67eb9af
[ 0.000000] x15: ffffffffffffffff x14: ffff800011249908
[ 0.000000] x13: ffff800091243ae7 x12: ffff800011243af4
[ 0.000000] x11: ffff80001126e000 x10: ffff800011243a70
[ 0.000000] x9 : 00000000ffffffd0 x8 : ffff80001069c828
[ 0.000000] x7 : 0000000000000059 x6 : ffff8000113fb4d1
[ 0.000000] x5 : 0000000000000001 x4 : 0000000000000000
[ 0.000000] x3 : 0000000000000000 x2 : 0000000000000000
[ 0.000000] x1 : 0000000000000000 x0 : ffff8000116f000c
[ 0.000000] Call trace:
[ 0.000000] __raw_readl+0x0/0x8
[ 0.000000] gic_of_init+0x188/0x224
[ 0.000000] of_irq_init+0x200/0x3cc
[ 0.000000] irqchip_init+0x1c/0x40
[ 0.000000] init_IRQ+0x160/0x1d0
[ 0.000000] start_kernel+0x2ec/0x4b8
[ 0.000000] Code: a8c47bfd d65f03c0 d538d080 d65f03c0 (b9400000)
when reading the GICv4.1 GICD_TYPER2 register, which is unexpected...
Work around it by adding a new quirk for the following variants:
ThunderX: CN88xx
OCTEON TX: CN83xx, CN81xx
OCTEON TX2: CN93xx, CN96xx, CN98xx, CNF95xx*
and use this flag to avoid accessing GICD_TYPER2. Note that all
reserved registers (including redistributors and ITS) are impacted
by this erratum, but that only GICD_TYPER2 has to be worked around
so far.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Robert Richter <rrichter@marvell.com>
Tested-by: Mark Salter <msalter@redhat.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Robert Richter <rrichter@marvell.com>
Link: https://lore.kernel.org/r/20191027144234.8395-11-maz@kernel.org
Link: https://lore.kernel.org/r/20200311115649.26060-1-maz@kernel.org
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Also adjust the argument to really match with the actually remaining
buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EC_FLAGS_QUERY_HANDSHAKE switch is never set in the current
code (the only function setting it is defined under #if 0) and
has no effect whatever, so eliminate it and drop the code
depending on it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The reason for clearing boot_ec_is_ecdt in acpi_ec_add() (if a
PNP0C09 device object matching the ECDT boot EC had been found in
the namespace) was to cause acpi_ec_ecdt_start() to return early,
but since the latter does not look at boot_ec_is_ecdt any more,
acpi_ec_add() need not clear it.
Moreover, doing that may be confusing as it may cause "DSDT" to be
printed instead of "ECDT" in the EC initialization completion
message, so stop doing it.
While at it, split the EC initialization completion message into
two messages, one regarding the boot EC and another one printed
regardless of whether or not the EC at hand is the boot one.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Notice that the return value of acpi_ec_init() is discarded anyway,
so it can be void and it doesn't need to check the return values of
acpi_bus_register_driver() and acpi_ec_ecdt_start() called by it.
Thus the latter can be void too and it really has nothing to do
if acpi_ec_add() has already found an EC matching the boot one in the
namespace. Also, acpi_ec_ecdt_get_handle() can be folded into it.
Modify the code accordingly and while at it create a propoer kerneldoc
comment to document acpi_ec_ecdt_start() and move the remark regarding
ASUS X550ZE along with the related bug URL from acpi_ec_init() into
that comment.
Additionally, fix up a stale comment in acpi_ec_init().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 406857f773b0 ("ACPI: EC: add support for hardware-reduced
systems") made ec_install_handlers() return an error on failures
to configure a GPIO IRQ for the EC, but that is inconsistent with
the handling of the GPE event handler installation failures even
though it is exactly the same issue and the driver can respond to
it in the same way in both cases (the EC can be actively polled
for events through its registers if the event handler installation
fails).
Moreover, it requires acpi_ec_add() to take that special case into
account and disagrees with the ec_install_handlers() header comment.
For this reason, rework the event handler installation code in
ec_install_handlers() to explicitly take deferred probing (that
may be needed in the GPIO IRQ case) into account and to avoid
failing the EC initialization in any other case.
Among other things, reduce code duplication between
install_gpe_event_handler() and install_gpio_irq_event_handler() by
moving some code from there into ec_install_handlers() itself and
simplify the error code path in acpi_ec_add().
While at it, turn the ec_install_handlers() header comment into
a proper kerneldoc one and add some general control flow information
to it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
|
|
Previously all fields of structure kvm_lapic_irq were not initialized
before it was passed to kvm_bitmap_or_dest_vcpus(). Which will cause
an issue when any of those fields are used for processing a request.
For example not initializing the msi_redir_hint field before passing
to the kvm_bitmap_or_dest_vcpus(), may lead to a misbehavior of
kvm_apic_map_get_dest_lapic(). This will specifically happen when the
kvm_lowest_prio_delivery() returns TRUE due to a non-zero garbage
value of msi_redir_hint, which should not happen as the request belongs
to APIC fixed delivery mode and we do not want to deliver the
interrupt only to the lowest priority candidate.
This patch initializes all the fields of kvm_lapic_irq based on the
values of ioapic redirect_entry object before passing it on to
kvm_bitmap_or_dest_vcpus().
Fixes: 7ee30bc132c6 ("KVM: x86: deliver KVM IOAPIC scan request to target vCPUs")
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
[Set level to false since the value doesn't really matter. Suggested
by Vitaly Kuznetsov. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.
The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.
[1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
BGRT is for displaying seamless OEM logo from booting to login screen;
however, this mechanism does not always work well on all configurations
and the OEM logo can be displayed multiple times. This looks worse than
without BGRT enabled.
This patch adds a kernel parameter to disable BGRT in boot time. This is
easier than re-compiling a kernel with CONFIG_ACPI_BGRT disabled.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1
is not supported[*], i.e. intercepting ENCLS to inject a #UD is
unnecessary.
Avoiding ENCLS-exiting even when it is reported as supported by the CPU
works around a reported issue where SGX is "hard" disabled after an S3
suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
are enumerated as unsupported. While the root cause of the S3 issue is
unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
workaround for what is most likely a hardware or firmware issue. As a
bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
vmcs02.
Note, SGX must be disabled in BIOS to take advantage of this workaround
[*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
cleared. Soft disabled meaning disabling SGX without clearing the
primary CPUID bit (in leaf 0x7) and without poking into non-SGX
CPU paths, e.g. for the VMCS controls.
Fixes: 0b665d304028 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
Reported-by: Toni Spets <toni.spets@iki.fi>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
g++ insists that function declaration must start with extern "C"
(which asmlinkage expands to).
gcc doesn't care.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") accidentally left out the ir_data pointer when
calling modity_irte_ga(), which causes the function amd_iommu_update_ga()
to return prematurely due to struct amd_ir_data.ref is NULL and
the "is_run" bit of IRTE does not get updated properly.
This results in bad I/O performance since IOMMU AVIC always generate GA Log
entry and notify IOMMU driver and KVM when it receives interrupt from the
PCI pass-through device instead of directly inject interrupt to the vCPU.
Fixes by passing ir_data when calling modify_irte_ga() as done previously.
Fixes: b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
VMD subdevices are created with a PCI domain ID of 0x10000 or
higher.
These subdevices are also handled like all other PCI devices by
dmar_pci_bus_notifier().
However, when dmar_alloc_pci_notify_info() take records of such devices,
it will truncate the domain ID to a u16 value (in info->seg).
The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if
it is 0000:00:02.0.
In the unlucky event that a real device also exists at 0000:00:02.0 and
also has a device-specific entry in the DMAR table,
dmar_insert_dev_scope() will crash on:
BUG_ON(i >= devices_cnt);
That's basically a sanity check that only one PCI device matches a
single DMAR entry; in this case we seem to have two matching devices.
Fix this by ignoring devices that have a domain number higher than
what can be looked up in the DMAR table.
This problem was carefully diagnosed by Jian-Hong Pan.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Fixes: 59ce0515cdaf3 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When base address in RHSA structure doesn't match base address in
each DRHD structure, the base address in last DRHD is printed out.
This doesn't make sense when there are multiple DRHD units, fix it
by printing the buggy RHSA's base address.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Fixes: fd0c8894893cb ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when
casting to enums. The kernel does this in certain places, such as device
tree matches to set the version of the device being used, which allows
the kernel to avoid using a gigantic union.
https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428
https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402
https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264
To avoid a ton of false positive warnings, disable this particular part
of the warning, which has been split off into a separate diagnostic so
that the entire warning does not need to be turned off for clang. It
will be visible under W=1 in case people want to go about fixing these
easily and enabling the warning treewide.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/887
Link: https://github.com/llvm/llvm-project/commit/2a41b31fcdfcb67ab7038fc2ffb606fd50b83a84
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in drivers: ipr and ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ipr: Fix softlockup when rescanning devices in petitboot
scsi: ufs: Fix possible unclocked access to auto hibern8 timer register
|
|
Fix the handling of signals in client rxrpc calls made by the afs
filesystem. Ignore signals completely, leaving call abandonment or
connection loss to be detected by timeouts inside AF_RXRPC.
Allowing a filesystem call to be interrupted after the entire request has
been transmitted and an abort sent means that the server may or may not
have done the action - and we don't know. It may even be worse than that
for older servers.
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
When an AFS service handler function aborts a call, AF_RXRPC marks the call
as complete - which means that it's not going to get any more packets from
the receiver. This is a problem because reception of the final ACK is what
triggers afs_deliver_to_call() to drop the final ref on the afs_call
object.
Instead, aborted AFS service calls may then just sit around waiting for
ever or until they're displaced by a new call on the same connection
channel or a connection-level abort.
Fix this by calling afs_set_call_complete() to finalise the afs_call struct
representing the call.
However, we then need to drop the ref that stops the call from being
deallocated. We can do this in afs_set_call_complete(), as the work queue
is holding a separate ref of its own, but then we shouldn't do it in
afs_process_async_call() and afs_delete_async_call().
call->drop_ref is set to indicate that a ref needs dropping for a call and
this is dealt with when we transition a call to AFS_CALL_COMPLETE.
But then we also need to get rid of the ref that pins an asynchronous
client call. We can do this by the same mechanism, setting call->drop_ref
for an async client call too.
We can also get rid of call->incoming since nothing ever sets it and only
one thing ever checks it (futilely).
A trace of the rxrpc_call and afs_call struct ref counting looks like:
<idle>-0 [001] ..s5 164.764892: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_new_incoming_call+0x473/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns5 164.766001: rxrpc_call: c=00000002 QUE u=4 sp=rxrpc_propose_ACK+0xbe/0x551 a=00000000442095b5
<idle>-0 [001] .Ns4 164.766005: rxrpc_call: c=00000002 PUT u=3 sp=rxrpc_new_incoming_call+0xa3f/0xb34 a=00000000442095b5
<idle>-0 [001] .Ns7 164.766433: afs_call: c=00000002 WAKE u=2 o=11 sp=rxrpc_notify_socket+0x196/0x33c
kworker/1:2-1810 [001] ...1 164.768409: rxrpc_call: c=00000002 SEE u=3 sp=rxrpc_process_call+0x25/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.769439: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000001 00000000 02 22 ACK CallAck
kworker/1:2-1810 [001] ...1 164.769459: rxrpc_call: c=00000002 PUT u=2 sp=rxrpc_process_call+0x74f/0x7ae a=00000000442095b5
kworker/1:2-1810 [001] ...1 164.770794: afs_call: c=00000002 QUEUE u=3 o=12 sp=afs_deliver_to_call+0x449/0x72c
kworker/1:2-1810 [001] ...1 164.770829: afs_call: c=00000002 PUT u=2 o=12 sp=afs_process_async_call+0xdb/0x11e
kworker/1:2-1810 [001] ...2 164.771084: rxrpc_abort: c=00000002 95786a88:00000008 s=0 a=1 e=1 K-1
kworker/1:2-1810 [001] ...1 164.771461: rxrpc_tx_packet: c=00000002 e9f1a7a8:95786a88:00000008:09c5 00000002 00000000 04 00 ABORT CallAbort
kworker/1:2-1810 [001] ...1 164.771466: afs_call: c=00000002 PUT u=1 o=12 sp=SRXAFSCB_ProbeUuid+0xc1/0x106
The abort generated in SRXAFSCB_ProbeUuid(), labelled "K-1", indicates that
the local filesystem/cache manager didn't recognise the UUID as its own.
Fixes: 2067b2b3f484 ("afs: Fix the CB.ProbeUuid service handler to reply correctly")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix a couple of tracelines to indicate the usage count after the atomic op,
not the usage count before it to be consistent with other afs and rxrpc
trace lines.
Change the wording of the afs_call_trace_work trace ID label from "WORK" to
"QUEUE" to reflect the fact that it's queueing work, not doing work.
Fixes: 341f741f04be ("afs: Refcount the afs_call struct")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the
timeout for when a signal occurs up to at least two jiffies as a 1 jiffy
timeout may end up being effectively 0 if jiffies wraps at the wrong time.
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the interruptibility of kernel-initiated client calls so that they're
either only interruptible when they're waiting for a call slot to come
available or they're not interruptible at all. Either way, they're not
interruptible during transmission.
This should help prevent StoreData calls from being interrupted when
writeback is in progress. It doesn't, however, handle interruption during
the receive phase.
Userspace-initiated calls are still interruptable. After the signal has
been handled, sendmsg() will return the amount of data copied out of the
buffer and userspace can perform another sendmsg() call to continue
transmission.
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Abstract out the calculation of there being sufficient Tx buffer space.
This is reproduced several times in the rxrpc sendmsg code.
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Pull NFS client bugfixes from Anna Schumaker:
"These are mostly fscontext fixes, but there is also one that fixes
collisions seen in fscache:
- Ensure the fs_context has the correct fs_type when mounting and
submounting
- Fix leaking of ctx->nfs_server.hostname
- Add minor version to fscache key to prevent collisions"
* tag 'nfs-for-5.6-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: add minor version to nfs_server_key for fscache
NFS: Fix leak of ctx->nfs_server.hostname
NFS: Don't hard-code the fs_type when submounting
NFS: Ensure the fs_context has the correct fs_type before mounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix an Oops introduced in v5.4"
* tag 'fuse-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: fix stack use after return
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix three bugs introduced in this cycle"
* tag 'ovl-fixes-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix lockdep warning for async write
ovl: fix some xino configurations
ovl: fix lock in ovl_llseek()
|
|
During a rename whiteout, if btrfs_whiteout_for_rename() returns an error
we can end up returning from btrfs_rename() with the log context object
still in the root's log context list - this happens if 'sync_log' was
set to true before we called btrfs_whiteout_for_rename() and it is
dangerous because we end up with a corrupt linked list (root->log_ctxs)
as the log context object was allocated on the stack.
After btrfs_rename() returns, any task that is running btrfs_sync_log()
concurrently can end up crashing because that linked list is traversed by
btrfs_sync_log() (through btrfs_remove_all_log_ctxs()). That results in
the same issue that commit e6c617102c7e4 ("Btrfs: fix log context list
corruption after rename exchange operation") fixed.
Fixes: d4682ba03ef618 ("Btrfs: sync log after logging new name")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix cpupower utility build failures with -fno-common enabled (Mike
Gilbert)"
* tag 'pm-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpupower: avoid multiple definition with gcc -fno-common
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix here, improving the RCU callback ordering from last
week. After a bit more perusing by Paul, he poked a hole in the
original"
* tag 'io_uring-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
io_uring: ensure RCU callback ordering with rcu_barrier()
|
|
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release. This contains:
- Fix for a corruption issue with the s390 dasd driver (Stefan)
- Fixup/improvement for the flush insertion change that we had in
this series (Ming)
- Fix for the partition suppor for host aware zoned devices
(Shin'ichiro)
- Fix incorrect blk-iocost comparison (Tejun)
The diffstat looks large, but that's a) mostly dasd, and b) the flush
fix from Ming adds a big comment"
* tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block:
block: Fix partition support for host aware zoned block devices
blk-mq: insert flush request to the front of dispatch queue
s390/dasd: fix data corruption for thin provisioned devices
blk-iocost: fix incorrect vtime comparison in iocg_is_idle()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix HW busy detection support for host controllers requiring the
MMC_RSP_BUSY response flag (R1B) to be set for the command. In
particular for CMD6 (eMMC), erase/trim/discard (SD/eMMC) and CMD5
(eMMC sleep).
MMC host:
- sdhci-omap|tegra: Fix support for HW busy detection"
* tag 'mmc-v5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command
mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard
mmc: core: Allow host controllers to require R1B for CMD6
|
|
If the shell test directory isn't present the exit code will be 255 but
with no error messages printed. Add an error message.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200313005602.45236-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.6
Third, and hopefully last, set of fixes for v5.6.
iwlwifi
* fix a locking issue in time events handling
* a fix in rate-scaling
* fix for a potential NULL pointer deref
* enable antenna diversity in some devices that were erroneously not doing it
* allow FW dumps to continue when the FW is stuck
* a fix in the HE capabilities handling
* another fix for FW dumps where we were reading wrong addresses
* fix link in MAINTAINERS file
rtlwifi
* fix regression causing connect issues in v5.4
wlcore
* remove merge damage which luckily didn't have any impact on functionality
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-03-12
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 161 insertions(+), 15 deletions(-).
The main changes are:
1) Andrii fixed two bugs in cgroup-bpf.
2) John fixed sockmap.
3) Luke fixed x32 jit.
4) Martin fixed two issues in struct_ops.
5) Yonghong fixed bpf_send_signal.
6) Yoshiki fixed BTF enum.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
afs_put_addrlist() casts kfree() to rcu_callback_t. Apart from being wrong
in theory, this might also blow up when people start enforcing function
types via compiler instrumentation, and it means the rcu_head has to be
first in struct afs_addr_list.
Use kfree_rcu() instead, it's simpler and more correct.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The descriptions for the spi-rx-bus-width and spi-tx-bus-width
properties refer to "MISO" and "MOSI", which are not explained in the
document. While these abbreviations are fairly common when talking
about SPI, and thus may not need an explanation, they are not entirely
correct in this context, as the SPI controller may be used in slave mode
instead of master mode.
Fix this by replacing them by "read transfers" resp. "write transfers",
like is done for the spi-rx-delay-us and spi-tx-delay-us properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200306085038.8111-3-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the DT bindings for an SPI controller specify that
"#address-cells" must be fixed to one. However, that applies to an SPI
controller in master mode only. When running in SPI slave mode,
"#address-cells" should not be specified.
Fix this making "#address-cells" mutually-exclusive with "spi-slave".
Fixes: 0a1b929356830257 ("spi: Add YAML schemas for the generic SPI options")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200306085038.8111-2-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With current code:
st-gyro-i2c i2c-PRP0001:00: i2c-PRP0001:00 supply vdd not found, using dummy regulator
which looks a bit oververbose.
Replace this with simplified format string for the above case, and drop
"deviceless" case since for all dev_*() macros used in _regulator_get()
the "(null)" will be printed anyway.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200312183245.1612-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v5.6-rc6
- fix regulator underflow bug introduced during the v5.6 merge window
|
|
A vTPM 2.0 is identified by 'IBM,vtpm20' in the 'compatible' node in
the device tree. Handle it in the same way as 'IBM,vtpm'.
The vTPM 2.0's log is written in little endian format so that for this
aspect we can rely on existing code.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Lockdep reports "WARNING: lock held when returning to user space!" due to
async write holding freeze lock over the write. Apparently aio.c already
deals with this by lying to lockdep about the state of the lock.
Do the same here. No need to check for S_IFREG() here since these file ops
are regular-only.
Reported-by: syzbot+9331a354f4f624a52a55@syzkaller.appspotmail.com
Fixes: 2406a307ac7d ("ovl: implement async IO routines")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Fix up two bugs in the coversion to xino_mode:
1. xino=off does not always end up in disabled mode
2. xino=auto on 32bit arch should end up in disabled mode
Take a proactive approach to disabling xino on 32bit kernel:
1. Disable XINO_AUTO config during build time
2. Disable xino with a warning on mount time
As a by product, xino=on on 32bit arch also ends up in disabled mode.
We never intended to enable xino on 32bit arch and this will make the
rest of the logic simpler.
Fixes: 0f831ec85eda ("ovl: simplify ovl_same_sb() helper")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
The L3 interconnect's memory map is from 0x0 to
0xffffffff. Out of this, System memory (SDRAM) can be
accessed from 0x80000000 to 0xffffffff (2GB)
DRA7 does support 4GB of SDRAM but upper 2GB can only be
accessed by the MPU subsystem.
Add the dma-ranges property to reflect the physical address limit
of the L3 bus.
Issues ere observed only with SATA on DRA7-EVM with 4GB RAM
and CONFIG_ARM_LPAE enabled. This is because the controller
supports 64-bit DMA and its driver sets the dma_mask to 64-bit
thus resulting in DMA accesses beyond L3 limit of 2G.
Setting the correct bus_dma_limit fixes the issue.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Cc: stable@kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Shutdown of firmware framebuffer has a bunch of problems. Because
of this the framebuffer region might still be reserved even after
drm_fb_helper_remove_conflicting_pci_framebuffers() returned.
Don't consider pci_request_region() failure for the framebuffer
region as fatal error to workaround this issue.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com
|
|
When a kernel ULP requests the rdmavt to create a completion queue, it
allocated the queue and set cq->kqueue to point to it. However, when the
completion queue is destroyed, cq->queue is freed instead, leading to a
memory leak:
https://lore.kernel.org/r/215235485.15264050.1583334487658.JavaMail.zimbra@redhat.com
unreferenced object 0xffffc90006639000 (size 12288):
comm "kworker/u128:0", pid 8, jiffies 4295777598 (age 589.085s)
hex dump (first 32 bytes):
4d 00 00 00 4d 00 00 00 00 c0 08 ac 8b 88 ff ff M...M...........
00 00 00 00 80 00 00 00 00 00 00 00 10 00 00 00 ................
backtrace:
[<0000000035a3d625>] __vmalloc_node_range+0x361/0x720
[<000000002942ce4f>] __vmalloc_node.constprop.30+0x63/0xb0
[<00000000f228f784>] rvt_create_cq+0x98a/0xd80 [rdmavt]
[<00000000b84aec66>] __ib_alloc_cq_user+0x281/0x1260 [ib_core]
[<00000000ef3764be>] nvme_rdma_cm_handler+0xdb7/0x1b80 [nvme_rdma]
[<00000000936b401c>] cma_cm_event_handler+0xb7/0x550 [rdma_cm]
[<00000000d9c40b7b>] addr_handler+0x195/0x310 [rdma_cm]
[<00000000c7398a03>] process_one_req+0xdd/0x600 [ib_core]
[<000000004d29675b>] process_one_work+0x920/0x1740
[<00000000efedcdb5>] worker_thread+0x87/0xb40
[<000000005688b340>] kthread+0x327/0x3f0
[<0000000043a168d6>] ret_from_fork+0x3a/0x50
This patch fixes the issue by freeing cq->kqueue instead.
Fixes: 239b0e52d8aa ("IB/hfi1: Move rvt_cq_wc struct into uapi directory")
Link: https://lore.kernel.org/r/20200313123957.14343.43879.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org> # 5.4.x
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The vector management code assumes that managed interrupts cannot be
migrated away from an online CPU. free_moved_vector() has a WARN_ON_ONCE()
which triggers when a managed interrupt vector association on a online CPU
is cleared. The CPU offline code uses a different mechanism which cannot
trigger this.
This assumption is not longer correct because the new CPU isolation feature
which affects the placement of managed interrupts must be able to move a
managed interrupt away from an online CPU.
There are two reasons why this can happen:
1) When the interrupt is activated the affinity mask which was
established in irq_create_affinity_masks() is handed in to
the vector allocation code. This mask contains all CPUs to which
the interrupt can be made affine to, but this does not take the
CPU isolation 'managed_irq' mask into account.
When the interrupt is finally requested by the device driver then the
affinity is checked again and the CPU isolation 'managed_irq' mask is
taken into account, which moves the interrupt to a non-isolated CPU if
possible.
2) The interrupt can be affine to an isolated CPU because the
non-isolated CPUs in the calculated affinity mask are not online.
Once a non-isolated CPU which is in the mask comes online the
interrupt is migrated to this non-isolated CPU
In both cases the regular online migration mechanism is used which triggers
the WARN_ON_ONCE() in free_moved_vector().
Case #1 could have been addressed by taking the isolation mask into
account, but that would require a massive code change in the activation
logic and the eventual migration event was accepted as a reasonable
tradeoff when the isolation feature was developed. But even if #1 would be
addressed, #2 would still trigger it.
Of course the warning in free_moved_vector() was overlooked at that time
and the above two cases which have been discussed during patch review have
obviously never been tested before the final submission.
So keep it simple and remove the warning.
[ tglx: Rewrote changelog and added a comment to free_moved_vector() ]
Fixes: 11ea68f553e2 ("genirq, sched/isolation: Isolate from handling managed interrupts")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lkml.kernel.org/r/20200312205830.81796-1-peterx@redhat.com
|
|
i2c_verify_client() can fail, so we need to put the device when that
happens.
Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Non-IB devices do not have a umad interface and the client_data will be
left set to NULL. In this case calling get_nl_info() will try to kref a
NULL cdev causing a crash:
general protection fault, probably for non-canonical address 0xdffffc00000000ba: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000005d0-0x00000000000005d7]
CPU: 0 PID: 20851 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kobject_get+0x35/0x150 lib/kobject.c:640
Code: 53 e8 3f b0 8b f9 4d 85 e4 0f 84 a2 00 00 00 e8 31 b0 8b f9 49 8d 7c 24 3c 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f b6 04 02 48 89 fa
+83 e2 07 38 d0 7f 08 84 c0 0f 85 eb 00 00 00
RSP: 0018:ffffc9000946f1a0 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: ffffffff85bdbbb0 RCX: ffffc9000bf22000
RDX: 00000000000000ba RSI: ffffffff87e9d78f RDI: 00000000000005d4
RBP: ffffc9000946f1b8 R08: ffff8880581a6440 R09: ffff8880581a6cd0
R10: fffffbfff154b838 R11: ffffffff8aa5c1c7 R12: 0000000000000598
R13: 0000000000000000 R14: ffffc9000946f278 R15: ffff88805cb0c4d0
FS: 00007faa9e8af700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30121000 CR3: 000000004515d000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
get_device+0x25/0x40 drivers/base/core.c:2574
__ib_get_client_nl_info+0x205/0x2e0 drivers/infiniband/core/device.c:1861
ib_get_client_nl_info+0x35/0x180 drivers/infiniband/core/device.c:1881
nldev_get_chardev+0x575/0xac0 drivers/infiniband/core/nldev.c:1621
rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline]
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:672
____sys_sendmsg+0x753/0x880 net/socket.c:2343
___sys_sendmsg+0x100/0x170 net/socket.c:2397
__sys_sendmsg+0x105/0x1d0 net/socket.c:2430
__do_sys_sendmsg net/socket.c:2439 [inline]
__se_sys_sendmsg net/socket.c:2437 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Cc: stable@kernel.org
Fixes: 8f71bb0030b8 ("RDMA: Report available cdevs through RDMA_NLDEV_CMD_GET_CHARDEV")
Link: https://lore.kernel.org/r/20200310075339.238090-1-leon@kernel.org
Reported-by: syzbot+46fe08363dbba223dec5@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
If name memory allocation fails the name will be left empty and
device_add_one() will crash:
kobject: (0000000004952746): attempted to be registered with empty name!
WARNING: CPU: 0 PID: 329 at lib/kobject.c:234 kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 329 Comm: syz-executor.5 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:kobject_add_internal+0x7ac/0x9a0 lib/kobject.c:234
Code: 1a 98 ca f9 e9 f0 f8 ff ff 4c 89 f7 e8 6d 98 ca f9 e9 95 f9 ff ff e8 c3 f0 8b f9 4c 89 e6 48 c7 c7 a0 0e 1a 89 e8 e3 41 5c f9 <0f> 0b 41 bd ea ff ff ff e9 52 ff ff ff e8 a2 f0 8b f9 0f 0b e8 9b
RSP: 0018:ffffc90005b27908 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815eae46 RDI: fffff52000b64f13
RBP: ffffc90005b27960 R08: ffff88805aeba480 R09: ffffed1015d06659
R10: ffffed1015d06658 R11: ffff8880ae8332c7 R12: ffff8880a37fd000
R13: 0000000000000000 R14: ffff888096691780 R15: 0000000000000001
kobject_add_varg lib/kobject.c:390 [inline]
kobject_add+0x150/0x1c0 lib/kobject.c:442
device_add+0x3be/0x1d00 drivers/base/core.c:2412
add_one_compat_dev drivers/infiniband/core/device.c:901 [inline]
add_one_compat_dev+0x46a/0x7e0 drivers/infiniband/core/device.c:857
rdma_dev_init_net+0x2eb/0x490 drivers/infiniband/core/device.c:1120
ops_init+0xb3/0x420 net/core/net_namespace.c:137
setup_net+0x2d5/0x8b0 net/core/net_namespace.c:327
copy_net_ns+0x29e/0x5a0 net/core/net_namespace.c:468
create_new_namespaces+0x403/0xb50 kernel/nsproxy.c:108
unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:229
ksys_unshare+0x444/0x980 kernel/fork.c:2955
__do_sys_unshare kernel/fork.c:3023 [inline]
__se_sys_unshare kernel/fork.c:3021 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3021
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Link: https://lore.kernel.org/r/20200309193200.GA10633@ziepe.ca
Cc: stable@kernel.org
Fixes: 4e0f7b907072 ("RDMA/core: Implement compat device/sysfs tree in net namespace")
Reported-by: syzbot+ab4dae63f7d310641ded@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Commit 6825d3ea6cde ("iommu/vt-d: Add debugfs support to show register
contents") dumps the register contents for all IOMMU devices.
Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers,
even though some of the registers are 32 bits, which is incorrect.
Use the correct read function variant (dmar_readl/dmar_readq) while
reading the contents of 32/64 bit registers respectively.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.com
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
