| Age | Commit message (Collapse) | Author |
|---|
|
Andrey Ignatov says:
====================
The patch set fixes BSD'ism in sys_sendmsg to rewrite unspecified
destination IPv6 for unconnected UDP sockets in sys_sendmsg with [::1] in
case when either CONFIG_CGROUP_BPF is enabled or when sys_sendmsg BPF hook
sets destination IPv6 to [::].
Patch 1 is the fix and provides more details.
Patch 2 adds two test cases to verify the fix.
v1->v2:
* Fix compile error in patch 1.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to
rewrite destination IPv6 = [::] with [::1] (BSD'ism).
Two test cases are added:
1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program
doesn't touch it.
2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program
rewrites it with [::].
In both cases [::1] is used by sys_sendmsg code eventually and datagram
is sent successfully for unconnected UDP socket.
Example of relevant output:
Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS]
Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
sys_sendmsg has supported unspecified destination IPv6 (wildcard) for
unconnected UDP sockets since 876c7f41. When [::] is passed by user as
destination, sys_sendmsg rewrites it with [::1] to be consistent with
BSD (see "BSD'ism" comment in the code).
This didn't work when cgroup-bpf was enabled though since the rewrite
[::] -> [::1] happened before passing control to cgroup-bpf block where
fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that
might or might not be changed by BPF program). That way if user passed
[::] as dst IPv6 it was first rewritten with [::1] by original code from
876c7f41, but then rewritten back with [::] by cgroup-bpf block.
It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present
(CONFIG_CGROUP_BPF=y was enough).
The fix is to apply BSD'ism after cgroup-bpf block so that [::] is
replaced with [::1] no matter where it came from: passed by user to
sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.
Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Reported-by: Nitin Rawat <nitin.rawat@intel.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add documentation for /sys/block/<disk>/queue/io_timeout.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some non-generic ia64 configs don't build swiotlb, and thus should not
pull in the generic non-coherent DMA infrastructure.
Fixes: 68c608345c ("swiotlb: remove dma_mark_clean")
Reported-by: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This has been broken forever, and nobody ever really noticed because
it's purely a performance issue.
Long long ago, in commit 6175ddf06b61 ("x86: Clean up mem*io functions")
Brian Gerst simplified the memory copies to and from iomem, since on
x86, the instructions to access iomem are exactly the same as the
regular instructions.
That is technically true, and things worked, and nobody said anything.
Besides, back then the regular memcpy was pretty simple and worked fine.
Nobody noticed except for David Laight, that is. David has a testing a
TLP monitor he was writing for an FPGA, and has been occasionally
complaining about how memcpy_toio() writes things one byte at a time.
Which is completely unacceptable from a performance standpoint, even if
it happens to technically work.
The reason it's writing one byte at a time is because while it's
technically true that accesses to iomem are the same as accesses to
regular memory on x86, the _granularity_ (and ordering) of accesses
matter to iomem in ways that they don't matter to regular cached memory.
In particular, when ERMS is set, we default to using "rep movsb" for
larger memory copies. That is indeed perfectly fine for real memory,
since the whole point is that the CPU is going to do cacheline
optimizations and executes the memory copy efficiently for cached
memory.
With iomem? Not so much. With iomem, "rep movsb" will indeed work, but
it will copy things one byte at a time. Slowly and ponderously.
Now, originally, back in 2010 when commit 6175ddf06b61 was done, we
didn't use ERMS, and this was much less noticeable.
Our normal memcpy() was simpler in other ways too.
Because in fact, it's not just about using the string instructions. Our
memcpy() these days does things like "read and write overlapping values"
to handle the last bytes of the copy. Again, for normal memory,
overlapping accesses isn't an issue. For iomem? It can be.
So this re-introduces the specialized memcpy_toio(), memcpy_fromio() and
memset_io() functions. It doesn't particularly optimize them, but it
tries to at least not be horrid, or do overlapping accesses. In fact,
this uses the existing __inline_memcpy() function that we still had
lying around that uses our very traditional "rep movsl" loop followed by
movsw/movsb for the final bytes.
Somebody may decide to try to improve on it, but if we've gone almost a
decade with only one person really ever noticing and complaining, maybe
it's not worth worrying about further, once it's not _completely_ broken?
Reported-by: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This actually enables the __put_user_goto() functionality in
unsafe_put_user().
For an example of the effect of this, this is the code generated for the
unsafe_put_user(signo, &infop->si_signo, Efault);
in the waitid() system call:
movl %ecx,(%rbx) # signo, MEM[(struct __large_struct *)_2]
It's just one single store instruction, along with generating an
exception table entry pointing to the Efault label case in case that
instruction faults.
Before, we would generate this:
xorl %edx, %edx
movl %ecx,(%rbx) # signo, MEM[(struct __large_struct *)_3]
testl %edx, %edx
jne .L309
with the exception table generated for that 'mov' instruction causing us
to jump to a stub that set %edx to -EFAULT and then jumped back to the
'testl' instruction.
So not only do we now get rid of the extra code in the normal sequence,
we also avoid unnecessarily keeping that extra error register live
across it all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is finally the actual reason for the odd error handling in the
"unsafe_get/put_user()" functions, introduced over three years ago.
Using a "jump to error label" interface is somewhat odd, but very
convenient as a programming interface, and more importantly, it fits
very well with simply making the target be the exception handler address
directly from the inline asm.
The reason it took over three years to actually do this? We need "asm
goto" support for it, which only became the default on x86 last year.
It's now been a year that we've forced asm goto support (see commit
e501ce957a78 "x86: Force asm-goto"), and so let's just do it here too.
[ Side note: this commit was originally done back in 2016. The above
commentary about timing is obviously about it only now getting merged
into my real upstream tree - Linus ]
Sadly, gcc still only supports "asm goto" with asms that do not have any
outputs, so we are limited to only the put_user case for this. Maybe in
several more years we can do the get_user case too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Similar to c5ee066333eb ("ipv6: Consider sk_bound_dev_if when binding a
socket to an address"), binding a socket to v4 mapped addresses needs to
consider if the socket is bound to a device.
This problem also exists from the beginning of git history.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The alternative coding patch for parisc in kernel 4.20 broke booting
machines with PA8500-PA8700 CPUs. The problem is, that for such machines
the parisc kernel automatically utilizes huge pages to access kernel
text code, but the set_kernel_text_rw() function, which is used shortly
before applying any alternative patches, didn't used the correctly
hugepage-aligned addresses to remap the kernel text read-writeable.
Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure")
Cc: <stable@vger.kernel.org> [4.20]
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Merge in a few missing patches from the pull request (my copy of the
branch was behind the staged version in linux-next).
* next/drivers:
memory: pl353: Add driver for arm pl353 static memory controller
dt-bindings: memory: Add pl353 smc controller devicetree binding information
firmware: qcom: scm: fix compilation error when disabled
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Enable the UniPhier MIO DMAC driver. This is used as the DMA engine
for accelerating the SD/eMMC controller drivers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The new ability added to the driver to use mii_bus to handle MII related
ioctls is causing compile issues when the driver is compiled into the
kernel (i.e. not a module).
The problem was in selecting MDIO_DEVICE instead of the preferred PHYLIB
Kconfig option. The reason being that MDIO_DEVICE had a dependency on
PHYLIB and would be compiled as a module when PHYLIB was a module, no
matter whether ixgbe was compiled into the kernel.
CC: Dave Jones <davej@codemonkey.org.uk>
CC: Steve Douthit <stephend@silicom-usa.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Reviewed-by: Stephen Douthit <stephend@silicom-usa.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot was able to crash one host with the following stack trace :
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 8625 Comm: syz-executor4 Not tainted 4.20.0+ #8
RIP: 0010:dev_net include/linux/netdevice.h:2169 [inline]
RIP: 0010:icmp6_send+0x116/0x2d30 net/ipv6/icmp.c:426
icmpv6_send
smack_socket_sock_rcv_skb
security_sock_rcv_skb
sk_filter_trim_cap
__sk_receive_skb
dccp_v6_do_rcv
release_sock
This is because a RX packet found socket owned by user and
was stored into socket backlog. Before leaving RCU protected section,
skb->dev was cleared in __sk_receive_skb(). When socket backlog
was finally handled at release_sock() time, skb was fed to
smack_socket_sock_rcv_skb() then icmp6_send()
We could fix the bug in smack_socket_sock_rcv_skb(), or simply
make icmp6_send() more robust against such possibility.
In the future we might provide to icmp6_send() the net pointer
instead of infering it.
Fixes: d66a8acbda92 ("Smack: Inform peer that IPv6 traffic has been blocked")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit ade446403bfb ("net: ipv4: do not handle duplicate fragments as
overlapping") changed IPv4 defragmentation so that duplicate fragments,
as well as _some_ fragments completely covered by previously delivered
fragments, do not lead to the whole frag queue being discarded. This
makes the existing ip_defrag selftest flaky.
This patch
* makes sure that negative IPv4 defrag tests generate truly overlapping
fragments that trigger defrag queue drops;
* tests that duplicate IPv4 fragments do not trigger defrag queue drops;
* makes a couple of minor tweaks to the test aimed at increasing its code
coverage and reduce flakiness.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds MTU default value to qmap network interface in
order to avoid "RTNETLINK answers: No buffer space available"
error when setting an ipv6 address.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Huazhong Tan says:
====================
net: hns: Bugfixes for HNS driver
This patchset includes bugfixes for the HNS ethernet controller driver.
Every patch is independent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will
identify a use after free bug:
[134.189505] Unable to handle kernel paging request at virtual address
006b6b6b6b6b6b6b
[134.197553] Mem abort info:
[134.200381] ESR = 0x96000004
[134.203487] Exception class = DABT (current EL), IL = 32 bits
[134.209497] SET = 0, FnV = 0
[134.212596] EA = 0, S1PTW = 0
[134.215777] Data abort info:
[134.218701] ISV = 0, ISS = 0x00000004
[134.222596] CM = 0, WnR = 0
[134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges
[134.232851] Internal error: Oops: 96000004 [#1] SMP
[134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G
OE 4.19.5-1.2.34.aarch64 #1
[134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018
[134.255181] pstate: 20000005 (nzCv daif -PAN -UAO)
[134.260044] pc : hns_ae_put_handle+0x38/0x60
[134.264372] lr : hns_ae_put_handle+0x24/0x60
[134.268700] sp : ffff00001be93c50
[134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040
[134.277442] x27: 0000000000000000 x26: 0000000000000000
[134.282830] x25: 0000000056000000 x24: 0000000000000015
[134.288284] x23: ffff0000096fe098 x22: ffff000001050070
[134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098
[134.303287] x19: ffff80afb75ec098 x18: 0000000000000000
[134.312945] x17: 0000000000000000 x16: 0000000000000000
[134.322517] x15: 0000000000000002 x14: 0000000000000000
[134.332030] x13: dead000000000100 x12: ffff7e02bea3c988
[134.341487] x11: ffff80affbee9e68 x10: 0000000000000000
[134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000
[134.360569] x7 : dead000000000100 x6 : ffff000009579748
[134.370059] x5 : 0000000000210d00 x4 : 0000000000000000
[134.379550] x3 : 0000000000000001 x2 : 0000000000000000
[134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000
[134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd)
[134.408498] Call trace:
[134.414611] hns_ae_put_handle+0x38/0x60
[134.422208] hnae_put_handle+0xd4/0x108
[134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv]
[134.438342] platform_drv_remove+0x2c/0x70
[134.445958] device_release_driver_internal+0x174/0x208
[134.454810] driver_detach+0x70/0xd8
[134.461913] bus_remove_driver+0x64/0xe8
[134.469396] driver_unregister+0x34/0x60
[134.476822] platform_driver_unregister+0x20/0x30
[134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv]
[134.494634] __arm64_sys_delete_module+0x238/0x290
struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is
freed, than use hnae_handle will cause use after free panic.
This patch frees vf_cb after hnae_handle used.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko
after rmmod.") add phy_stop in hns_nic_init_phy(), In the branch of "net",
this method is effective, but in the branch of "net-next", it will cause
a WARNING when hns modules loaded, reference to commit 2b3e88ea6528 ("net:
phy: improve phy state checking"):
[10.092168] ------------[ cut here ]------------
[10.092171] called from state READY
[10.092189] WARNING: CPU: 4 PID: 1 at ../drivers/net/phy/phy.c:854
phy_stop+0x90/0xb0
[10.092192] Modules linked in:
[10.092197] CPU: 4 PID:1 Comm:swapper/0 Not tainted 4.20.0-rc7-next-20181220 #1
[10.092200] Hardware name: Huawei TaiShan 2280 /D05, BIOS Hisilicon D05 UEFI
16.12 Release 05/15/2017
[10.092202] pstate: 60000005 (nZCv daif -PAN -UAO)
[10.092205] pc : phy_stop+0x90/0xb0
[10.092208] lr : phy_stop+0x90/0xb0
[10.092209] sp : ffff00001159ba90
[10.092212] x29: ffff00001159ba90 x28: 0000000000000007
[10.092215] x27: ffff000011180068 x26: ffff0000110a5620
[10.092218] x25: ffff0000113b6000 x24: ffff842f96dac000
[10.092221] x23: 0000000000000000 x22: 0000000000000000
[10.092223] x21: ffff841fb8425e18 x20: ffff801fb3a56438
[10.092226] x19: ffff801fb3a56000 x18: ffffffffffffffff
[10.092228] x17: 0000000000000000 x16: 0000000000000000
[10.092231] x15: ffff00001122d6c8 x14: ffff00009159b7b7
[10.092234] x13: ffff00001159b7c5 x12: ffff000011245000
[10.092236] x11: 0000000005f5e0ff x10: ffff00001159b750
[10.092239] x9 : 00000000ffffffd0 x8 : 0000000000000465
[10.092242] x7 : ffff0000112457f8 x6 : ffff0000113bd7ce
[10.092245] x5 : 0000000000000000 x4 : 0000000000000000
[10.092247] x3 : 00000000ffffffff x2 : ffff000011245828
[10.092250] x1 : 4b5860bd05871300 x0 : 0000000000000000
[10.092253] Call trace:
[10.092255] phy_stop+0x90/0xb0
[10.092260] hns_nic_init_phy+0xf8/0x110
[10.092262] hns_nic_try_get_ae+0x4c/0x3b0
[10.092264] hns_nic_dev_probe+0x1fc/0x480
[10.092268] platform_drv_probe+0x50/0xa0
[10.092271] really_probe+0x1f4/0x298
[10.092273] driver_probe_device+0x58/0x108
[10.092275] __driver_attach+0xdc/0xe0
[10.092278] bus_for_each_dev+0x74/0xc8
[10.092280] driver_attach+0x20/0x28
[10.092283] bus_add_driver+0x1b8/0x228
[10.092285] driver_register+0x60/0x110
[10.092288] __platform_driver_register+0x40/0x48
[10.092292] hns_nic_dev_driver_init+0x18/0x20
[10.092296] do_one_initcall+0x5c/0x180
[10.092299] kernel_init_freeable+0x198/0x240
[10.092303] kernel_init+0x10/0x108
[10.092306] ret_from_fork+0x10/0x18
[10.092308] ---[ end trace 1396dd0278e397eb ]---
This WARNING occurred because of calling phy_stop before phy_start.
The root cause of the problem in commit '308c6cafde01' is:
Reference to hns_nic_init_phy, the flag phydev->supported is changed after
phy_connect_direct. The flag phydev->supported is 0x6ff when hns modules is
loaded, so will not change Fiber Port power(Reference to marvell.c), which
is power on at default.
Then the flag phydev->supported is changed to 0x6f, so Fiber Port power is
off when removing hns modules.
When hns modules installed again, the flag phydev->supported is default
value 0x6ff, so will not change Fiber Port power(now is off), causing mac
link not up problem.
So the solution is change phy flags before phy_connect_direct.
Fixes: 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko after rmmod.")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
swap_readpage() wants to do polling to bring in pages if asked to, but
it doesn't mark the bio as being polled. Additionally, the looping
around the blk_poll() check isn't correct - if we get a zero return, we
should call io_schedule(), we can't just assume that the bio has
completed. The regular bio->bi_private check should be used for that.
Link: http://lkml.kernel.org/r/e15243a8-2cdf-c32c-ecee-f289377c8ef9@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As per Documentation/process/submitting-patches, Co-developed-by is a
valid signature.
This commit removes the warning.
Link: http://lkml.kernel.org/r/1544808928-20002-3-git-send-email-jorge.ramirez-ortiz@linaro.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The accepted terminology will be Co-developed-by therefore lose the
capital letter from now on.
Link: http://lkml.kernel.org/r/1544808928-20002-2-git-send-email-jorge.ramirez-ortiz@linaro.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Acked-by: Himanshu Jha <himanshujha199640@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
unreferenced object 0xffff808ec6dc5a80 (size 128):
comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s)
hex dump (first 32 bytes):
ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace:
[<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500
[<000000004f708d37>] platform_device_register_full+0xbc/0x1e8
[<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450
[<00000000ef135642>] acpi_default_enumeration+0x34/0x78
[<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0
[<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
[<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0
[<000000002968643e>] acpi_bus_scan+0xb0/0x110
[<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410
[<00000000965b3c5a>] acpi_init+0x408/0x49c
[<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4
[<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c
[<0000000070ea6c15>] kernel_init+0x18/0x138
[<00000000fb8fff06>] ret_from_fork+0x10/0x1c
[<0000000041273a0d>] 0xffffffffffffffff
Then, faddr2line pointed out this line,
/*
* This memory isn't freed when the device is put,
* I don't have a nice idea for that though. Conceptually
* dma_mask in struct device should not be a pointer.
* See http://thread.gmane.org/gmane.linux.kernel.pci/9081
*/
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
Since this leak has existed for more than 8 years and it does not
reference other parts of the memory, let kmemleak ignore it, so users
don't need to waste time reporting this in the future.
Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Multiple filesystems open code lru_to_page(). Rectify this by moving
the macro from mm_inline (which is specific to lru stuff) to the more
generic mm.h header and start using the macro where appropriate.
No functional changes.
Link: http://lkml.kernel.org/r/20181129104810.23361-1-nborisov@suse.com
Link: https://lkml.kernel.org/r/20181129075301.29087-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Pankaj gupta <pagupta@redhat.com>
Acked-by: "Yan, Zheng" <zyan@redhat.com> [ceph]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is already done for us internally by the signal machinery.
[akpm@linux-foundation.org: fix fs/buffer.c]
Link: http://lkml.kernel.org/r/20181116002713.8474-7-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is already done for us internally by the signal machinery.
Link: http://lkml.kernel.org/r/20181116002713.8474-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is already done for us internally by the signal machinery.
Link: http://lkml.kernel.org/r/20181116002713.8474-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is already done for us internally by the signal machinery.
Link: http://lkml.kernel.org/r/20181116002713.8474-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is already done for us internally by the signal machinery.
Link: http://lkml.kernel.org/r/20181116002713.8474-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Moving page-tables at the PMD-level on x86 is known to be safe. Enable
this option so that we can do fast mremap when possible.
Link: http://lkml.kernel.org/r/20181108181201.88826-4-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Android needs to mremap large regions of memory during memory management
related operations. The mremap system call can be really slow if THP is
not enabled. The bottleneck is move_page_tables, which is copying each
pte at a time, and can be really slow across a large map. Turning on
THP may not be a viable option, and is not for us. This patch speeds up
the performance for non-THP system by copying at the PMD level when
possible.
The speedup is an order of magnitude on x86 (~20x). On a 1GB mremap,
the mremap completion times drops from 3.4-3.6 milliseconds to 144-160
microseconds.
Before:
Total mremap time for 1GB data: 3521942 nanoseconds.
Total mremap time for 1GB data: 3449229 nanoseconds.
Total mremap time for 1GB data: 3488230 nanoseconds.
After:
Total mremap time for 1GB data: 150279 nanoseconds.
Total mremap time for 1GB data: 144665 nanoseconds.
Total mremap time for 1GB data: 158708 nanoseconds.
If THP is enabled the optimization is mostly skipped except in certain
situations.
[joel@joelfernandes.org: fix 'move_normal_pmd' unused function warning]
Link: http://lkml.kernel.org/r/20181108224457.GB209347@google.com
Link: http://lkml.kernel.org/r/20181108181201.88826-3-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Add support for fast mremap".
This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems. There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work. Also we find that there is no point in passing the 'address' to
pte_alloc since its unused. This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well. Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.
Build and boot tested on x86-64. Build tested on arm64. The config
enablement patch for arm64 will be posted in the future after more
testing.
The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.
// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.
virtual patch
@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@
fn(...
- , T2 E2
)
{ ... }
@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)
@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)
@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
fn(...
-, E2
)
@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@
(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)
Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Unpacking an external initrd may fail e.g. not enough memory. This
leads to an incomplete rootfs because some files might be extracted
already. Fixed by cleaning the rootfs so the kernel is not using an
incomplete rootfs.
Link: http://lkml.kernel.org/r/20181030151805.5519-1-david.engraf@sysgo.com
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A bug is present in GDB which causes early string termination when
parsing variables. This has been reported [0], but we should ensure
that we can support at least basic printing of the core kernel strings.
For current gdb version (has been tested with 7.3 and 8.1), 'lx-version'
only prints one character.
(gdb) lx-version
L(gdb)
This can be fixed by casting 'linux_banner' as (char *).
(gdb) lx-version
Linux version 4.19.0-rc1+ (changbin@acer) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #21 SMP Sat Sep 1 21:43:30 CST 2018
[0] https://sourceware.org/bugzilla/show_bug.cgi?id=20077
[kbingham@kernel.org: add detail to commit message]
Link: http://lkml.kernel.org/r/20181111162035.8356-1-kieran.bingham@ideasonboard.com
Fixes: 2d061d999424 ("scripts/gdb: add version command")
Signed-off-by: Du Changbin <changbin.du@gmail.com>
Signed-off-by: Kieran Bingham <kbingham@kernel.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since __sanitizer_cov_trace_const_cmp4 is marked as notrace, the
function called from __sanitizer_cov_trace_const_cmp4 shouldn't be
traceable either. ftrace_graph_caller() gets called every time func
write_comp_data() gets called if it isn't marked 'notrace'. This is the
backtrace from gdb:
#0 ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:179
#1 0xffffff8010201920 in ftrace_caller () at ../arch/arm64/kernel/entry-ftrace.S:151
#2 0xffffff8010439714 in write_comp_data (type=5, arg1=0, arg2=0, ip=18446743524224276596) at ../kernel/kcov.c:116
#3 0xffffff8010439894 in __sanitizer_cov_trace_const_cmp4 (arg1=<optimized out>, arg2=<optimized out>) at ../kernel/kcov.c:188
#4 0xffffff8010201874 in prepare_ftrace_return (self_addr=18446743524226602768, parent=0xffffff801014b918, frame_pointer=18446743524223531344) at ./include/generated/atomic-instrumented.h:27
#5 0xffffff801020194c in ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:182
Rework so that write_comp_data() that are called from
__sanitizer_cov_trace_*_cmp*() are marked as 'notrace'.
Commit 903e8ff86753 ("kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace")
missed to mark write_comp_data() as 'notrace'. When that patch was
created gcc-7 was used. In lib/Kconfig.debug
config KCOV_ENABLE_COMPARISONS
depends on $(cc-option,-fsanitize-coverage=trace-cmp)
That code path isn't hit with gcc-7. However, it were that with gcc-8.
Link: http://lkml.kernel.org/r/20181206143011.23719-1-anders.roxell@linaro.org
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
So that we can also runtime chose to print out the needed system info
for panic, other than setting the kernel cmdline.
Link: http://lkml.kernel.org/r/1543398842-19295-3-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kernel panic issues are always painful to debug, partially because it's
not easy to get enough information of the context when panic happens.
And we have ramoops and kdump for that, while this commit tries to
provide a easier way to show the system info by adding a cmdline
parameter, referring some idea from sysrq handler.
Link: http://lkml.kernel.org/r/1543398842-19295-2-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Strengthen validation of BFS superblock against corruption. Make
in-core inode bitmap static part of superblock info structure. Print a
warning when mounting a BFS filesystem created with "-N 512" option as
only 510 files can be created in the root directory. Make the kernel
messages more uniform. Update the 'prefix' passed to bfs_dump_imap() to
match the current naming of operations. White space and comments
cleanup.
Link: http://lkml.kernel.org/r/CAK+_RLkFZMduoQF36wZFd3zLi-6ZutWKsydjeHFNdtRvZZEb4w@mail.gmail.com
Signed-off-by: Tigran Aivazian <aivazian.tigran@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
get_arg_page() checks bprm->rlim_stack.rlim_cur and re-calculates the
"extra" size for argv/envp pointers every time, this is a bit ugly and
even not strictly correct: acct_arg_size() must not account this size.
Remove all the rlimit code in get_arg_page(). Instead, add bprm->argmin
calculated once at the start of __do_execve_file() and change
copy_strings to check bprm->p >= bprm->argmin.
The patch adds the new helper, prepare_arg_pages() which initializes
bprm->argc/envc and bprm->argmin.
[oleg@redhat.com: fix !CONFIG_MMU version of get_arg_page()]
Link: http://lkml.kernel.org/r/20181126122307.GA1660@redhat.com
[akpm@linux-foundation.org: use max_t]
Link: http://lkml.kernel.org/r/20181112160910.GA28440@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
load_script() simply truncates bprm->buf and this is very wrong if the
length of shebang string exceeds BINPRM_BUF_SIZE-2. This can silently
truncate i_arg or (worse) we can execute the wrong binary if buf[2:126]
happens to be the valid executable path.
Change load_script() to return ENOEXEC if it can't find '\n' or zero in
bprm->buf. Note that '\0' can come from either
prepare_binprm()->memset() or from kernel_read(), we do not care.
Link: http://lkml.kernel.org/r/20181112160931.GA28463@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ben Woodard <woodard@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We get a warning when building kernel with W=1:
kernel/fork.c:167:13: warning: no previous prototype for `arch_release_thread_stack' [-Wmissing-prototypes]
kernel/fork.c:779:13: warning: no previous prototype for `fork_init' [-Wmissing-prototypes]
Add the missing declaration in head file to fix this.
Also, remove arch_release_thread_stack() completely because no arch
seems to implement it since bb9d81264 (arch: remove tile port).
Link: http://lkml.kernel.org/r/1542170087-23645-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch introduces 3 new inline functions - is_fat12, is_fat16 and
is_fat32, and replaces every occurrence in the code in which the FS
variant (whether this is FAT12, FAT16 or FAT32) was previously checked
using msdos_sb_info->fat_bits.
Link: http://lkml.kernel.org/r/1544990640-11604-4-git-send-email-carmeli.tamir@gmail.com
Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
MAX_FAT is useless in msdos_fs.h, since it uses the MSDOS_SB function
that is defined in fat.h. So really, this macro can be only called from
code that already includes fat.h.
Hence, this patch moves it to fat.h, right after MSDOS_SB is defined. I
also changed it to an inline function in order to save the double call
to MSDOS_SB. This was suggested by joe@perches.com in the previous
version.
This patch is required for the next in the series, in which the variant
(whether this is FAT12, FAT16 or FAT32) checks are replaced with new
macros.
Link: http://lkml.kernel.org/r/1544990640-11604-3-git-send-email-carmeli.tamir@gmail.com
Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The comment edited in this patch was the only reference to the
FAT_FIRST_ENT macro, which is not used anymore. Moreover, the commented
line of code does not compile with the current code.
Since the FAT_FIRST_ENT macro checks the FAT variant in a way that the
patch series changes, I removed it, and instead wrote a clear
explanation of what was checked.
I verified that the changed comment is correct according to Microsoft
FAT spec, search for "BPB_Media" in the following references:
1. Microsoft FAT specification 2005
(http://read.pudn.com/downloads77/ebook/294884/FAT32%20Spec%20%28SDA%20Contribution%29.pdf).
Search for 'volume label'.
2. Microsoft Extensible Firmware Initiative, FAT32 File System Specification
(https://staff.washington.edu/dittrich/misc/fatgen103.pdf).
Search for 'volume label'.
Link: http://lkml.kernel.org/r/1544990640-11604-2-git-send-email-carmeli.tamir@gmail.com
Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The FAT file system volume label file stored in the root directory
should match the volume label field in the FAT boot sector. As
consequence, the max length of these fields ought to be the same. This
patch replaces the magic '11' usef in the struct fat_boot_sector with
MSDOS_NAME, which is used in struct msdos_dir_entry.
Please check the following references:
1. Microsoft FAT specification 2005
(http://read.pudn.com/downloads77/ebook/294884/FAT32%20Spec%20%28SDA%20Contribution%29.pdf).
Search for 'volume label'.
2. Microsoft Extensible Firmware Initiative, FAT32 File System Specification
(https://staff.washington.edu/dittrich/misc/fatgen103.pdf).
Search for 'volume label'.
3. User space code that creates FAT filesystem
sometimes uses MSDOS_NAME for the label, sometimes not.
Search for 'if (memcmp(label, NO_NAME, MSDOS_NAME))'.
I consider to make the same patch there as well.
https://github.com/dosfstools/dosfstools/blob/master/src/mkfs.fat.c
Link: http://lkml.kernel.org/r/1543096879-82837-1-git-send-email-carmeli.tamir@gmail.com
Signed-off-by: Carmeli Tamir <carmeli.tamir@gmail.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The immutable, append-only and no-dump attributes can only be retrieved
with an ioctl; implement the ->getattr() method to return them on statx.
Do not return the inode birthtime yet, because the issue of how best to
handle the post-2038 timestamps is still under discussion.
This patch is needed to pass xfstests generic/424.
Link: http://lkml.kernel.org/r/20181014163558.sxorxlzjqccq2lpw@eaf
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 092a53452bb7 ("autofs: take more care to not update last_used on
path walk") helped to (partially) resolve a problem where automounts
were not expiring due to aggressive accesses from user space.
This patch was later reverted because, for very large environments, it
meant more mount requests from clients and when there are a lot of
clients this caused a fairly significant increase in server load.
But there is a need for both types of expire check, depending on use
case, so add a mount option to allow for strict update of last use of
autofs dentrys (which just means not updating the last use on path walk
access).
Link: http://lkml.kernel.org/r/154296973880.9889.14085372741514507967.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change the superblock info. catatonic setting to be part of a flags bit
field.
Link: http://lkml.kernel.org/r/154296973142.9889.17275721668508589639.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The parse_options() function uses a long list of parameters, most of
which are present in the super block info structure already.
The mount parameters set in parse_options() options don't require
cleanup so using the super block info struct directly is simpler.
Link: http://lkml.kernel.org/r/154296972423.9889.9368859245676473329.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
