| Age | Commit message (Collapse) | Author |
|---|
|
So we can check FUA support status from the iomap direct IO code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This cast is wrong. "cdi->capacity" is an int and "arg" is an unsigned
long. The way the check is written now, if one of the high 32 bits is
set then we could read outside the info->slots[] array.
This bug is pretty old and it predates git.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Since commit:
a7e6f1ca90354a31 ("arm64: signal: Force SIGKILL for unknown signals in force_signal_inject")
... any signal which is not SIGKILL will be upgraded to a SIGKILL be
force_signal_inject(). This includes signals we do expect, such as
SIGILL triggered by do_undefinstr().
Fix the check to use a logical AND rather than a logical OR, permitting
signals whose layout is SIL_FAULT.
Fixes: a7e6f1ca90354a31 ("arm64: signal: Force SIGKILL for unknown signals in force_signal_inject")
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of kernel currently and the max cooling state of a
CPU cooling device is found by referring to the cpufreq table instead.
Remove the unused bindings.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Remove documentation for longer needed samsung thermal properties.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
|
|
Debian uses "make all" to build the Linux kernel, thus to be able to use
the self-decompressing kernel as default debian kernel we need to make
bzImage the default build target.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
LSPCON adapters in low-power state may ignore the first I2C write during
TMDS output buffer enabling, resulting in a blank screen even with an
otherwise enabled pipe. Fix this by reading back and validating the
written value a few times.
The problem was noticed on GLK machines with an onboard LSPCON adapter
after entering/exiting DC5 power state. Doing an I2C read of the adapter
ID as the first transaction - instead of the I2C write to enable the
TMDS buffers - returns the correct value. Based on this we assume that
the transaction itself is sent properly, it's only the adapter that is
not ready for some reason to accept this first write after waking from
low-power state. In my case the second I2C write attempt always
succeeded.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105854
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180416155309.11100-1-imre.deak@intel.com
|
|
On Geminilake, sometimes audio card is not getting
detected after reboot. This is a spurious issue happening on
Geminilake. HW codec and HD audio controller link was going
out of sync for which there was a fix in i915 driver but
was not getting invoked for GLK. Extending this fix to GLK as well.
Tested by Du,Wenkai on GLK board.
Bspec: 21829
v2: Instead of checking GEN9_BC, BXT and GLK macros, use IS_GEN9 macro (Jani N)
Cc: <stable@vger.kernel.org> # b651bd2a3ae3 ("drm/i915/audio: Fix audio enumeration issue on BXT")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: Abhay Kumar <abhay.Kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523989338-29677-1-git-send-email-gaurav.k.singh@intel.com
(cherry picked from commit 8221229046e862977ae93ec9d34aa583fbd10397)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We have to cleanup after i915_perf_init(), even on the error path, as it
passes a pointer into the module to the sysfs core. If we fail to
unregister the sysctl table, we leave a dangling pointer which then may
explode anytime later.
Fixes: 9f9b2792b6d3 ("drm/i915/perf: reuse timestamp frequency from device info")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414091233.32224-1-chris@chris-wilson.co.uk
(cherry picked from commit 9f172f6fbd243759c808d97bd83c95e49325b2c9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The VBT contains the DDC pin to use for specific ports. Alas, sometimes
the field appears to contain bogus data, and while we check for it later
on in intel_gmbus_get_adapter() we fail to check the returned NULL on
errors. Oops results.
The simplest approach seems to be to catch and ignore the bogus DDC pins
already at the VBT parsing phase, reverting to fixed per port default
pins. This doesn't guarantee display working, but at least it prevents
the oops. And we continue to be fuzzed by VBT.
One affected machine is Dell Latitude 5590 where a BIOS upgrade added
invalid DDC pins.
Typical backtrace:
[ 35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin))
[ 35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[ 35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[ 35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1
[ 35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[ 35.461450] Workqueue: events_unbound async_run_entry_fn
[ 35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915]
[ 35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286
[ 35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960
[ 35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[ 35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd
[ 35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000
[ 35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000
[ 35.461477] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[ 35.461479] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0
[ 35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 35.461486] Call Trace:
[ 35.461501] intel_hdmi_set_edid+0x37/0x27f [i915]
[ 35.461515] intel_hdmi_detect+0x7c/0x97 [i915]
[ 35.461518] drm_helper_probe_single_connector_modes+0xe1/0x6c0
[ 35.461521] drm_setup_crtcs+0x129/0xa6a
[ 35.461523] ? __switch_to_asm+0x34/0x70
[ 35.461525] ? __switch_to_asm+0x34/0x70
[ 35.461527] ? __switch_to_asm+0x40/0x70
[ 35.461528] ? __switch_to_asm+0x34/0x70
[ 35.461529] ? __switch_to_asm+0x40/0x70
[ 35.461531] ? __switch_to_asm+0x34/0x70
[ 35.461532] ? __switch_to_asm+0x40/0x70
[ 35.461534] ? __switch_to_asm+0x34/0x70
[ 35.461536] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[ 35.461538] ? __switch_to_asm+0x40/0x70
[ 35.461541] ? _cond_resched+0x10/0x33
[ 35.461557] intel_fbdev_initial_config+0xf/0x1c [i915]
[ 35.461560] async_run_entry_fn+0x2e/0xf5
[ 35.461563] process_one_work+0x15b/0x364
[ 35.461565] worker_thread+0x2c/0x3a0
[ 35.461567] ? process_one_work+0x364/0x364
[ 35.461568] kthread+0x10c/0x122
[ 35.461570] ? _kthread_create_on_node+0x5d/0x5d
[ 35.461572] ret_from_fork+0x35/0x40
[ 35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00
[ 35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[ 35.461606] ---[ end trace 4fe1e63e2dd93373 ]---
[ 35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[ 35.461613] IP: i2c_transfer+0x4/0x86
[ 35.461614] PGD 0 P4D 0
[ 35.461616] Oops: 0000 [#1] SMP PTI
[ 35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[ 35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G W 4.16.0-rc7.x64-g1cda370ffded #1
[ 35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[ 35.461628] Workqueue: events_unbound async_run_entry_fn
[ 35.461630] RIP: 0010:i2c_transfer+0x4/0x86
[ 35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246
[ 35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001
[ 35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000
[ 35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd
[ 35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002
[ 35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07
[ 35.461641] FS: 0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[ 35.461643] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0
[ 35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 35.461649] Call Trace:
[ 35.461652] drm_do_probe_ddc_edid+0xb3/0x128
[ 35.461654] drm_get_edid+0xe5/0x38d
[ 35.461669] intel_hdmi_set_edid+0x45/0x27f [i915]
[ 35.461684] intel_hdmi_detect+0x7c/0x97 [i915]
[ 35.461687] drm_helper_probe_single_connector_modes+0xe1/0x6c0
[ 35.461689] drm_setup_crtcs+0x129/0xa6a
[ 35.461691] ? __switch_to_asm+0x34/0x70
[ 35.461693] ? __switch_to_asm+0x34/0x70
[ 35.461694] ? __switch_to_asm+0x40/0x70
[ 35.461696] ? __switch_to_asm+0x34/0x70
[ 35.461697] ? __switch_to_asm+0x40/0x70
[ 35.461698] ? __switch_to_asm+0x34/0x70
[ 35.461700] ? __switch_to_asm+0x40/0x70
[ 35.461701] ? __switch_to_asm+0x34/0x70
[ 35.461703] __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[ 35.461705] ? __switch_to_asm+0x40/0x70
[ 35.461707] ? _cond_resched+0x10/0x33
[ 35.461724] intel_fbdev_initial_config+0xf/0x1c [i915]
[ 35.461727] async_run_entry_fn+0x2e/0xf5
[ 35.461729] process_one_work+0x15b/0x364
[ 35.461731] worker_thread+0x2c/0x3a0
[ 35.461733] ? process_one_work+0x364/0x364
[ 35.461734] kthread+0x10c/0x122
[ 35.461736] ? _kthread_create_on_node+0x5d/0x5d
[ 35.461738] ret_from_fork+0x35/0x40
[ 35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65
[ 35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30
[ 35.461757] CR2: 0000000000000010
[ 35.461759] ---[ end trace 4fe1e63e2dd93374 ]---
Based on a patch by Fei Li.
v2: s/reverting/sticking/ (Chris)
Cc: stable@vger.kernel.org
Cc: Fei Li <fei.li@intel.com>
Co-developed-by: Fei Li <fei.li@intel.com>
Reported-by: Pavel Nakonechnyi <zorg1331@gmail.com>
Reported-and-tested-by: Seweryn Kokot <sewkokot@gmail.com>
Reported-and-tested-by: Laszlo Valko <valko@linux.karinthy.hu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-1-jani.nikula@intel.com
(cherry picked from commit f212bf9abe5de9f938fecea7df07046e74052dde)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
While thinking about sporadic failures of perf_pmu/rc6-runtime-pm* tests
on some CI machines I have concluded that: a) the PMU readout of RC6 can
race against runtime PM transitions, and b) there are other reasons than
being runtime suspended which can cause intel_runtime_pm_get_if_in_use to
fail.
Therefore when estimating RC6 the code needs to assert we are indeed in
suspended state, and if not, the best we can do is return the last known
RC6 value.
Without this check we can calculate the estimated value based on un-
initialized or inappropriate internal state, which can result in over-
estimation, or in any case incorrect value being returned.
v2:
* Re-arrange the code a bit to avoid second unlock and return branch.
(Chris Wilson)
v3:
* Insert some strategic blank lines and improve commit msg.
(Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 1fe699e30113 ("drm/i915/pmu: Fix sleep under atomic in RC6 readout")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105010
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410112704.24462-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 2924bdee21edd6785a4df1b4d17fd3cb265fddd9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Along the eb_lookup_vmas() error path, the return value from
kmem_cache_alloc() was freed using kfree(). Fix it to use the proper
kmem_cache_free() instead.
Fixes: d1b48c1e7184 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Xidong Wang <wangxidong_97@163.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180404093824.9313-1-chris@chris-wilson.co.uk
(cherry picked from commit 6be1187dbffa0027ea379c53f7ca0c782515c610)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The example I2C code is rewritten to adopt the preferred kernel block
commenting style.
Signed-off-by: Sam Hansen <hansens@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Currently, Documentation/i2c/dev-interface describes the use of
i2c_smbus_* helper routines as static inlined functions provided by
linux/i2c-dev.h. Work has been done to refactor the linux/i2c-dev.h file
in the i2c-tools project out into its own library. As a result, these
docs have become stale.
This patch corrects the discrepancy and directs the reader to the
i2c-tools project for more information.
Signed-off-by: Sam Hansen <hansens@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
This strips trailing whitespace in Documentation/i2c/dev-interface.
Signed-off-by: Sam Hansen <hansens@google.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.
Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.
This simplifies the dependencies, and allows to improve compile-testing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
Kanda Motohiro reported that expanding a tiny xattr into a large xattr
fails on XFS because we remove the tiny xattr from a shortform fork and
then try to re-add it after converting the fork to extents format having
not removed the ATTR_REPLACE flag. This fails because the attr is no
longer present, causing a fs shutdown.
This is derived from the patch in his bug report, but we really
shouldn't ignore a nonzero retval from the remove call.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199119
Reported-by: kanda.motohiro@gmail.com
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
During the "insert range" fallocate operation, i_size grows by the
specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as
it should. But this comparison is done using the signed 'loff_t', and
'i_size + len' can wrap around to a negative value, causing the check to
incorrectly pass, resulting in an inode with "negative" i_size. This is
possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX.
ext4 and f2fs don't run into this because they set a smaller s_maxbytes.
Fix it by using subtraction instead.
Reproducer:
xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096"
Fixes: a904b1ca5751 ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: <stable@vger.kernel.org> # v4.1+
Originally-From: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix signed integer addition overflow too]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
If xfs_bmap_extents_to_btree fails in a mode where we call
xfs_iroot_realloc(-1) to de-allocate the root, set the
format back to extents.
Otherwise we can assume we can dereference ifp->if_broot
based on the XFS_DINODE_FMT_BTREE format, and crash.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199423
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Add several more validations to xfs_dinode_verify:
- For LOCAL data fork formats, di_nextents must be 0.
- For LOCAL attr fork formats, di_anextents must be 0.
- For inodes with no attr fork offset,
- format must be XFS_DINODE_FMT_EXTENTS if set at all
- di_anextents must be 0.
Thanks to dchinner for pointing out a couple related checks I had
forgotten to add.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199377
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Even if we don't have an IO context attached to a request, we still
need to clear the priv[0..1] pointers, as they could be pointing
to previously used bic/bfqq structures. If we don't do so, we'll
either corrupt memory on dispatching a request, or cause an
imbalance in counters.
Inspired by a fix from Kees.
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Fixes: aee69d78dec0 ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In commit ce290a19609d ("selftests: add devpts selftests"), the
filesystems directory was added to the top-level selftests Makefile.
That had the effect of causing the existing dnotify_test in the
filesystems directory to now be run as part of the default selftests
test-run. Unfortunately dnotify_test is actually an infinite loop.
Fix it by moving dnotify_test to TEST_GEN_PROGS_EXTENDED, which says
that it's a generated file (ie. built) but should not be run as part
of the default test suite run (it's an "extended" test).
While we're here cleanup a few other things, devpts_pts should be in
TEST_GEN_PROGS to indicate that it's built, and with the above two
changes we no longer need a custom all or clean rule.
Fixes: ce290a19609d ("selftests: add devpts selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Use new return type vm_fault_t for page_mkwrite
handler.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The current code null checks variable err_buf, which is always null
when it is checked, hence utf16_path is free'd and the function
returns -ENOENT everytime it is called, making it impossible for the
execution path to reach the following code:
err_buf = err_iov.iov_base;
Fix this by null checking err_iov.iov_base instead of err_buf. Also,
notice that err_buf no longer needs to be initialized to NULL.
Addresses-Coverity-ID: 1467876 ("Logically dead code")
Fixes: 2d636199e400 ("cifs: Change SMB2_open to return an iov for the error parameter")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Adding a dns_resolver key whose payload contains a very long option name
resulted in that string being printed in full. This hit the WARN_ONCE()
in set_precision() during the printk(), because printk() only supports a
precision of up to 32767 bytes:
precision 1000000 too large
WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0
Fix it by limiting option strings (combined name + value) to a much more
reasonable 128 bytes. The exact limit is arbitrary, but currently the
only recognized option is formatted as "dnserror=%lu" which fits well
within this limit.
Also ratelimit the printks.
Reproducer:
perl -e 'print "#", "A" x 1000000, "\x00"' | keyctl padd dns_resolver desc @s
This bug was found using syzkaller.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For some firmware variants - specifically 'capture packed stream' - RSS
filters are not valid. We must check if RSS is actually active rather
than merely enabled.
Fixes: 42356d9a137b ("sfc: support RSS spreading of ethtool ntuple filters")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller spotted an old bug which leads to reading skb beyond tail by 4
bytes on vlan tagged packets.
This is caused because skb_vlan_tagged_multi() did not check
skb_headlen.
BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline]
BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline]
BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline]
BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
eth_type_vlan include/linux/if_vlan.h:283 [inline]
skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline]
vlan_features_check include/linux/if_vlan.h:672 [inline]
dflt_features_check net/core/dev.c:2949 [inline]
netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009
validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084
__dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590
packet_snd net/packet/af_packet.c:2944 [inline]
packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
sock_write_iter+0x3b9/0x470 net/socket.c:909
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43ffa9
RSP: 002b:00007fff2cff3948 EFLAGS: 00000217 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043ffa9
RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00000000006cb018 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004018d0
R13: 0000000000401960 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234
sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085
packet_alloc_skb net/packet/af_packet.c:2803 [inline]
packet_snd net/packet/af_packet.c:2894 [inline]
packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
sock_write_iter+0x3b9/0x470 net/socket.c:909
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: 58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.")
Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Validate the topology input before we dereference the pointer.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The __current_kernel_time() function based on 'struct timespec' is no
longer recommended for new code, and the only user of this function has
been replaced by commit 6909e29fdefb ("kdb: use __ktime_get_real_seconds
instead of __current_kernel_time").
Remove the obsolete interface.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: sboyd@kernel.org
Cc: broonie@kernel.org
Cc: john.stultz@linaro.org
Link: https://lkml.kernel.org/r/1a9dbea7ee2cda7efe9ed330874075cf17fdbff6.1523596316.git.baolin.wang@linaro.org
|
|
struct tvec_base is a leftover of the original timer wheel implementation
and not longer used. Remove the forward declaration.
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Link: https://lkml.kernel.org/r/20180412075701.GA38952@sofia
|
|
Convert the clockevents driver from old-style printk() to pr_info() and
pr_cont(), to fix split kernel messages like below:
Clockevents: could not switch to one-shot mode:
dummy_timer is not functional.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: https://lkml.kernel.org/r/1522942018-14471-1-git-send-email-geert%2Brenesas@glider.be
|
|
The __clear_user function is defined to return the number of bytes that
could not be cleared. From the underlying memset / bzero implementation
this means setting register a2 to that number on return. Currently if a
page fault is triggered within the memset_partial block, the value
loaded into a2 on return is meaningless.
The label .Lpartial_fixup\@ is jumped to on page fault. In order to work
out how many bytes failed to copy, the exception handler should find how
many bytes left in the partial block (andi a2, STORMASK), add that to
the partial block end address (a2), and subtract the faulting address to
get the remainder. Currently it incorrectly subtracts the partial block
start address (t1), which has additionally been clobbered to generate a
jump target in memset_partial. Fix this by adding the block end address
instead.
This issue was found with the following test code:
int j, k;
for (j = 0; j < 512; j++) {
if ((k = clear_user(NULL, j)) != j) {
pr_err("clear_user (NULL %d) returned %d\n", j, k);
}
}
Which now passes on Creator Ci40 (MIPS32) and Cavium Octeon II (MIPS64).
Suggested-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/19108/
Signed-off-by: James Hogan <jhogan@kernel.org>
|
|
In arm64's kasan_init(), we use pfn_to_nid() to find the NUMA node a
span of memory is in, hoping to allocate shadow from the same NUMA node.
However, at this point, the page array has not been initialized, and
thus this is bogus.
Since commit:
f165b378bbdf6c8a ("mm: uninitialized struct page poisoning sanity")
... accessing fields of the page array results in a boot time Oops(),
highlighting this problem:
[ 0.000000] Unable to handle kernel paging request at virtual address dfff200000000000
[ 0.000000] Mem abort info:
[ 0.000000] ESR = 0x96000004
[ 0.000000] Exception class = DABT (current EL), IL = 32 bits
[ 0.000000] SET = 0, FnV = 0
[ 0.000000] EA = 0, S1PTW = 0
[ 0.000000] Data abort info:
[ 0.000000] ISV = 0, ISS = 0x00000004
[ 0.000000] CM = 0, WnR = 0
[ 0.000000] [dfff200000000000] address between user and kernel address ranges
[ 0.000000] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.16.0-07317-gf165b378bbdf #42
[ 0.000000] Hardware name: ARM Juno development board (r1) (DT)
[ 0.000000] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 0.000000] pc : __asan_load8+0x8c/0xa8
[ 0.000000] lr : __dump_page+0x3c/0x3b8
[ 0.000000] sp : ffff2000099b7ca0
[ 0.000000] x29: ffff2000099b7ca0 x28: ffff20000a1762c0
[ 0.000000] x27: ffff7e0000000000 x26: ffff2000099dd000
[ 0.000000] x25: ffff200009a3f960 x24: ffff200008f9c38c
[ 0.000000] x23: ffff20000a9d3000 x22: ffff200009735430
[ 0.000000] x21: fffffffffffffffe x20: ffff7e0001e50420
[ 0.000000] x19: ffff7e0001e50400 x18: 0000000000001840
[ 0.000000] x17: ffffffffffff8270 x16: 0000000000001840
[ 0.000000] x15: 0000000000001920 x14: 0000000000000004
[ 0.000000] x13: 0000000000000000 x12: 0000000000000800
[ 0.000000] x11: 1ffff0012d0f89ff x10: ffff10012d0f89ff
[ 0.000000] x9 : 0000000000000000 x8 : ffff8009687c5000
[ 0.000000] x7 : 0000000000000000 x6 : ffff10000f282000
[ 0.000000] x5 : 0000000000000040 x4 : fffffffffffffffe
[ 0.000000] x3 : 0000000000000000 x2 : dfff200000000000
[ 0.000000] x1 : 0000000000000005 x0 : 0000000000000000
[ 0.000000] Process swapper (pid: 0, stack limit = 0x (ptrval))
[ 0.000000] Call trace:
[ 0.000000] __asan_load8+0x8c/0xa8
[ 0.000000] __dump_page+0x3c/0x3b8
[ 0.000000] dump_page+0xc/0x18
[ 0.000000] kasan_init+0x2e8/0x5a8
[ 0.000000] setup_arch+0x294/0x71c
[ 0.000000] start_kernel+0xdc/0x500
[ 0.000000] Code: aa0403e0 9400063c 17ffffee d343fc00 (38e26800)
[ 0.000000] ---[ end trace 67064f0e9c0cc338 ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
Let's fix this by using early_pfn_to_nid(), as other architectures do in
their kasan init code. Note that early_pfn_to_nid acquires the nid from
the memblock array, which we iterate over in kasan_init(), so this
should be fine.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 39d114ddc6822302 ("arm64: add KASAN support")
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To ensure that qrtr can be loaded automatically, when needed, if it is compiled
as module.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit c1eef220c1760762753b602c382127bfccee226d ("vsock: always call
vsock_init_tables()") introduced a module_init() function without a
corresponding module_exit() function.
Modules with an init function can only be removed if they also have an
exit function. Therefore the vsock module was considered "permanent"
and could not be removed.
This patch adds an empty module_exit() function so that "rmmod vsock"
works. No explicit cleanup is required because:
1. Transports call vsock_core_exit() upon exit and cannot be removed
while sockets are still alive.
2. vsock_diag.ko does not perform any action that requires cleanup by
vsock.ko.
Fixes: c1eef220c176 ("vsock: always call vsock_init_tables()")
Reported-by: Xiumei Mu <xmu@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The walk_pte_level() function just uses __va to get the virtual address of
the PTE page, but that breaks when the PTE page is not in the direct
mapping with HIGHPTE=y.
The result is an unhandled kernel paging request at some random address
when accessing the current_kernel or current_user file.
Use the correct API to access PTE pages.
Fixes: fe770bf0310d ('x86: clean up the page table dumper and add 32-bit support')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc: jgross@suse.com
Cc: JBeulich@suse.com
Cc: hpa@zytor.com
Cc: aryabinin@virtuozzo.com
Cc: kirill.shutemov@linux.intel.com
Link: https://lkml.kernel.org/r/1523971636-4137-1-git-send-email-joro@8bytes.org
|
|
Intel's Skylake Server CPUs have a different LLC topology than previous
generations. When in Sub-NUMA-Clustering (SNC) mode, the package is divided
into two "slices", each containing half the cores, half the LLC, and one
memory controller and each slice is enumerated to Linux as a NUMA
node. This is similar to how the cores and LLC were arranged for the
Cluster-On-Die (CoD) feature.
CoD allowed the same cache line to be present in each half of the LLC.
But, with SNC, each line is only ever present in *one* slice. This means
that the portion of the LLC *available* to a CPU depends on the data being
accessed:
Remote socket: entire package LLC is shared
Local socket->local slice: data goes into local slice LLC
Local socket->remote slice: data goes into remote-slice LLC. Slightly
higher latency than local slice LLC.
The biggest implication from this is that a process accessing all
NUMA-local memory only sees half the LLC capacity.
The CPU describes its cache hierarchy with the CPUID instruction. One of
the CPUID leaves enumerates the "logical processors sharing this
cache". This information is used for scheduling decisions so that tasks
move more freely between CPUs sharing the cache.
But, the CPUID for the SNC configuration discussed above enumerates the LLC
as being shared by the entire package. This is not 100% precise because the
entire cache is not usable by all accesses. But, it *is* the way the
hardware enumerates itself, and this is not likely to change.
The userspace visible impact of all the above is that the sysfs info
reports the entire LLC as being available to the entire package. As noted
above, this is not true for local socket accesses. This patch does not
correct the sysfs info. It is the same, pre and post patch.
The current code emits the following warning:
sched: CPU #3's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency.
The warning is coming from the topology_sane() check in smpboot.c because
the topology is not matching the expectations of the model for obvious
reasons.
To fix this, add a vendor and model specific check to never call
topology_sane() for these systems. Also, just like "Cluster-on-Die" disable
the "coregroup" sched_domain_topology_level and use NUMA information from
the SRAT alone.
This is OK at least on the hardware we are immediately concerned about
because the LLC sharing happens at both the slice and at the package level,
which are also NUMA boundaries.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: brice.goglin@gmail.com
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lkml.kernel.org/r/20180407002130.GA18984@alison-desk.jf.intel.com
|
|
If the get_callchain_buffers fails to allocate the buffer it will
decrease the nr_callchain_events right away.
There's no point of checking the allocation error for
nr_callchain_events > 1. Removing that check.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20180415092352.12403-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The syzbot hit KASAN bug in perf_callchain_store having the entry stored
behind the allocated bounds [1].
We miss the sample_max_stack check for the initial event that allocates
callchain buffers. This missing check allows to create an event with
sample_max_stack value bigger than the global sysctl maximum:
# sysctl -a | grep perf_event_max_stack
kernel.perf_event_max_stack = 127
# perf record -vv -C 1 -e cycles/max-stack=256/ kill
...
perf_event_attr:
size 112
...
sample_max_stack 256
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 4
Note the '-C 1', which forces perf record to create just single event.
Otherwise it opens event for every cpu, then the sample_max_stack check
fails on the second event and all's fine.
The fix is to run the sample_max_stack check also for the first event
with callchains.
[1] https://marc.info/?l=linux-kernel&m=152352732920874&w=2
Reported-by: syzbot+7c449856228b63ac951e@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Fixes: 97c79a38cd45 ("perf core: Per event callchain limit")
Link: http://lkml.kernel.org/r/20180415092352.12403-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Return immediately when we find issue in the user stack checks. The
error value could get overwritten by following check for
PERF_SAMPLE_REGS_INTR.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Cc: x86@kernel.org
Fixes: 60e2364e60e8 ("perf: Add ability to sample machine state on interrupt")
Link: http://lkml.kernel.org/r/20180415092352.12403-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf list' with flags -d and -v print a description (-d) or a very
verbose explanation (-v) of CPU specific counter events. These
descriptions are provided with the json files in directory
pmu-events/arch/s390/*.json.
Display of these descriptions on s390 requires the corresponding json
files.
On s390 this does not work because function is_pmu_core() does not
detect the s390 directory name where the CPU specific events are listed.
On x86 it is:
/sys/bus/event_source/devices/cpu
whereas on s390 it is:
/sys/bus/event_source/devices/cpum_cf
/sys/bus/event_source/devices/cpum_sf
Fix this by adding s390 directory name testing to function
is_pmu_core(). This is the same approach as taken for the ARM platform.
Output before:
[root@s35lp76 perf]# ./perf list -d pmu
List of pre-defined events (to be used in -e):
cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event]
cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event]
cpum_cf/AES_CYCLES/ [Kernel PMU event]
cpum_cf/AES_FUNCTIONS/ [Kernel PMU event]
....
cpum_cf/TX_NC_TEND/ [Kernel PMU event]
cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event]
cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event]
Output after:
[root@s35lp76 perf]# ./perf list -d pmu
List of pre-defined events (to be used in -e):
cpum_cf/AES_BLOCKED_CYCLES/ [Kernel PMU event]
cpum_cf/AES_BLOCKED_FUNCTIONS/ [Kernel PMU event]
cpum_cf/AES_CYCLES/ [Kernel PMU event]
cpum_cf/AES_FUNCTIONS/ [Kernel PMU event]
....
cpum_cf/TX_NC_TEND/ [Kernel PMU event]
cpum_cf/VX_BCD_EXECUTION_SLOTS/ [Kernel PMU event]
cpum_sf/SF_CYCLES_BASIC/ [Kernel PMU event]
3906:
bcd_dfp_execution_slots
[BCD DFP Execution Slots]
decimal_instructions
[Decimal Instructions]
dtlb2_gpage_writes
[DTLB2 GPAGE Writes]
dtlb2_hpage_writes
[DTLB2 HPAGE Writes]
dtlb2_misses
[DTLB2 Misses]
dtlb2_writes
[DTLB2 Writes]
itlb2_misses
[ITLB2 Misses]
itlb2_writes
[ITLB2 Writes]
l1c_tlb2_misses
[L1C TLB2 Misses]
.....
cfvn 3:
cpu_cycles
[CPU Cycles]
instructions
[Instructions]
l1d_dir_writes
[L1D Directory Writes]
l1d_penalty_cycles
[L1D Penalty Cycles]
l1i_dir_writes
[L1I Directory Writes]
l1i_penalty_cycles
[L1I Penalty Cycles]
problem_state_cpu_cycles
[Problem State CPU Cycles]
problem_state_instructions
[Problem State Instructions]
....
csvn generic:
aes_blocked_cycles
[AES Blocked Cycles]
aes_blocked_functions
[AES Blocked Functions]
aes_cycles
[AES Cycles]
aes_functions
[AES Functions]
dea_blocked_cycles
[DEA Blocked Cycles]
dea_blocked_functions
[DEA Blocked Functions]
....
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180416132314.33249-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Append 'p' sign to 'S' tag designating the type of context switch out event so
'Sp' means preemption context switch. Documentation is extended to cover
new presentation changes.
$ perf script --show-switch-events -F +misc -I -i perf.data:
hdparm 4073 [004] U 762.198265: 380194 cycles:ppp: 7faf727f5a23 strchr (/usr/lib64/ld-2.26.so)
hdparm 4073 [004] K 762.198366: 441572 cycles:ppp: ffffffffb9218435 alloc_set_pte (/lib/modules/4.16.0-rc6+/build/vmlinux)
hdparm 4073 [004] S 762.198391: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [004] 762.198392: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073
swapper 0 [004] Sp 762.198477: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 4073/4073
hdparm 4073 [004] 762.198478: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
swapper 0 [007] K 762.198514: 2303073 cycles:ppp: ffffffffb98b0c66 intel_idle (/lib/modules/4.16.0-rc6+/build/vmlinux)
swapper 0 [007] Sp 762.198561: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 1134/1134
kworker/u16:18 1134 [007] 762.198562: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
kworker/u16:18 1134 [007] S 762.198567: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5fc65ce7-8ca5-53ae-8858-8ddd27290575@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Print additional 'preempt' tag for PERF_RECORD_SWITCH[_CPU_WIDE] OUT records when
event header misc field contains PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit set
designating preemption context switch out event:
tools/perf/perf report -D -i perf.data | grep _SWITCH
0 768361415226 0x27f076 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 8/8
4 768362216813 0x28f45e [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
4 768362217824 0x28f486 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073
0 768362414027 0x27f0ce [0x28]: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 8/8
0 768362414367 0x27f0f6 [0x28]: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/6f5aebb9-b96c-f304-f08f-8f046d38de4f@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Store preempting context switch out event into Perf trace as a part of
PERF_RECORD_SWITCH[_CPU_WIDE] record.
Percentage of preempting and non-preempting context switches help
understanding the nature of workloads (CPU or IO bound) that are running
on a machine;
The event is treated as preemption one when task->state value of the
thread being switched out is TASK_RUNNING. Event type encoding is
implemented using PERF_RECORD_MISC_SWITCH_OUT_PREEMPT bit;
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/9ff84e83-a0ca-dd82-a6d0-cb951689be74@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sync the following tooling headers with the latest kernel version:
tools/arch/arm/include/uapi/asm/kvm.h
- New ABI: KVM_REG_ARM_*
tools/arch/x86/include/asm/required-features.h
- Removal of NEED_LA57 dependency
tools/arch/x86/include/uapi/asm/kvm.h
- New KVM ABI: KVM_SYNC_X86_*
tools/include/uapi/asm-generic/mman-common.h
- New ABI: MAP_FIXED_NOREPLACE flag
tools/include/uapi/linux/bpf.h
- New ABI: BPF_F_SEQ_NUMBER functions
tools/include/uapi/linux/if_link.h
- New ABI: IFLA tun and rmnet support
tools/include/uapi/linux/kvm.h
- New ABI: hyperv eventfd and CONN_ID_MASK support plus header cleanups
tools/include/uapi/sound/asound.h
- New ABI: SNDRV_PCM_FORMAT_FIRST PCM format specifier
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
- The x86 system call table description changed due to the ptregs changes and the renames, in:
d5a00528b58c: syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
5ac9efa3c50d: syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
ebeb8c82ffaf: syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
Also fix the x86 syscall table warning:
-Warning: Kernel ABI header at 'tools/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
+Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
None of these changes impact existing tooling code, so we only have to copy the kernel version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com> <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Takuya Yamamoto <tkydevel@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lkml.kernel.org/r/20180416064024.ofjtrz5yuu3ykhvl@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
xenbus_command_reply() did not actually copy the response string and
leaked stack content instead.
Fixes: 9a6161fe73bd ("xen: return xenstore command failures via response instead of rc")
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
This is the sync up with the canonical definition of the sound
protocol in Xen:
1. Protocol version was referenced in the protocol description,
but missed its definition. Fixed by adding a constant
for current protocol version.
2. Some of the request descriptions have "reserved" fields
missed: fixed by adding corresponding entries.
3. Extend the size of the requests and responses to 64 octets.
Bump protocol version to 2.
4. Add explicit back and front synchronization
In order to provide explicit synchronization between backend and
frontend the following changes are introduced in the protocol:
- add new ring buffer for sending asynchronous events from
backend to frontend to report number of bytes played by the
frontend (XENSND_EVT_CUR_POS)
- introduce trigger events for playback control: start/stop/pause/resume
- add "req-" prefix to event-channel and ring-ref to unify naming
of the Xen event channels for requests and events
5. Add explicit back and front parameter negotiation
In order to provide explicit stream parameter negotiation between
backend and frontend the following changes are introduced in the protocol:
add XENSND_OP_HW_PARAM_QUERY request to read/update
configuration space for the parameters given: request passes
desired parameter's intervals/masks and the response to this request
returns allowed min/max intervals/masks to be used.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
When vgic_prune_ap_list() finds an interrupt that needs to be migrated
to a new VCPU, we should notify this VCPU of the pending interrupt,
since it requires immediate action.
Kick this VCPU once we have added the new IRQ to the list, but only
after dropping the locks.
Reported-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
While generating a message about guests probing for SVE/LORegions
is a useful debugging tool, considering it an error is slightly
over the top, as this is the only way the guest can find out
about the presence of the feature.
Let's turn these message into kvm_debug so that they can only
be seen if CONFIG_DYNAMIC_DEBUG, and kept quiet otherwise.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
