summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-26MIPS: N32: Define getdents64.Ralf Baechle
As a relativly new ABI N32 should only have received the getdents64(2) but instead it only had getdents(2). This was noticed as a performance anomaly in glibc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: MTX-1: Fix PCI on the MeshCube and related boardsBruno Randolf
This patch fixes a regression introduced by commit "MIPS: Alchemy: MTX-1: Use linux gpio api." (bb706b28bbd647c2fd7f22d6bf03a18b9552be05) which broke PCI bus operation. The problem is caused by alchemy_gpio2_enable() which resets the GPIO2 block. Two PCI signals (PCI_SERR and PCI_RST) are connected to GPIO2 and they obviously do not to like the reset. Since GPIO2 is correctly initialized by the boot monitor (YAMON) it is not necessary to call this function, so just remove it. Also replace gpio_set_value() with alchemy_gpio_set_value() to avoid problems in case gpiolib gets initialized after PCI. And since alchemy gpio_set_value() calls au_sync() we don't have to au_sync() again later. Signed-off-by: Bruno Randolf <br1@einfach.org> To: linux-mips@linux-mips.org To: manuel.lauss@googlemail.com Patchwork: https://patchwork.linux-mips.org/patch/1448/ Tested-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: Make init_vdso a subsys_initcall.David Daney
Quoting from Jiri Slaby's patch of a similar nature for x86: When initrd is in use and a driver does request_module() in its module_init (i.e. __initcall or device_initcall), a modprobe process is created with VDSO mapping. But VDSO is inited even in __initcall, i.e. on the same level (at the same time), so it may not be inited yet (link order matters). Move init_vdso up to subsys_initcall to avoid the issue. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Cc: Jiri Slaby <jslaby@suse.cz> Patchwork: http://patchwork.linux-mips.org/patch/1386/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: "Fix" useless 'init_vdso successfully' message.David Daney
In addition to being useless, it was mis-spelled. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: http://patchwork.linux-mips.org/patch/1385/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: PowerTV: Move register setup to before reading registers.David VomLehn
The 4600 family code reads registers to differentiate between two ASIC variants, but this was being done prior to the register setup. This moves register setup before the reading code. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1392/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26SOUND: Au1000: Fix section mismatchRalf Baechle
WARNING: sound/soc/au1x/snd-soc-au1xpsc-i2s.o(.data+0xa8): Section mismatch in reference from the variable au1xpsc_i2s_driver to the function .init.text:au1xpsc_i2s_drvprobe() The variable au1xpsc_i2s_driver references the function __init au1xpsc_i2s_drvprobe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: Au1100fb: Fix section mismatchRalf Baechle
WARNING: drivers/video/built-in.o(.data+0x360): Section mismatch in reference from the variable au1100fb_driver to the function .init.text:au1100fb_drv_probe() The variable au1100fb_driver references the function __init au1100fb_drv_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing which triggers of a slew of further mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_fix The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_fix. If au1100fb_fix is only used by au1100fb_drv_probe then annotate au1100fb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x21c): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_var The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_var. If au1100fb_var is only used by au1100fb_drv_probe then annotate au1100fb_var with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: PMAGB-B: Fix section mismatchRalf Baechle
WARNING: drivers/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. Fixing this one triggers a few more mismatches in order: WARNING: drivers/video/built-in.o(.devinit.text+0x414): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_fix The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_fix. If pmagbbfb_fix is only used by pmagbbfb_probe then annotate pmagbbfb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x45c): Section mismatch in reference from the function pmagbbfb_probe() to the variable .init.data:pmagbbfb_defined The function __devinit pmagbbfb_probe() references a variable __initdata pmagbbfb_defined. If pmagbbfb_defined is only used by pmagbbfb_probe then annotate pmagbbfb_defined with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5fc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_screen_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_screen_setup(). If pmagbbfb_screen_setup is only used by pmagbbfb_probe then annotate pmagbbfb_screen_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x6f4): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_osc_setup() The function __devinit pmagbbfb_probe() references a function __init pmagbbfb_osc_setup(). If pmagbbfb_osc_setup is only used by pmagbbfb_probe then annotate pmagbbfb_osc_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x5f8): Section mismatch in reference from the function pmagbbfb_osc_setup() to the variable .init.data:pmagbbfb_freqs.15993 The function __devinit pmagbbfb_osc_setup() references a variable __initdata pmagbbfb_freqs.15993. If pmagbbfb_freqs.15993 is only used by pmagbbfb_osc_setup then annotate pmagbbfb_freqs.15993 with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO: PMAG-BA: Fix section mismatchRalf Baechle
WARNING: drivers/video/built-in.o(.data+0x1e0): Section mismatch in reference fr om the variable pmagbafb_driver to the function .init.text:pmagbafb_probe() The variable pmagbafb_driver references the function __init pmagbafb_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one triggers 2 more: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_fix The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_fix. If pmagbafb_fix is only used by pmagbafb_probe then annotate pmagbafb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x108): Section mismatch in reference from the function pmagbafb_probe() to the variable .init.data:pmagbafb_defined The function __devinit pmagbafb_probe() references a variable __initdata pmagbafb_defined. If pmagbafb_defined is only used by pmagbafb_probe then annotate pmagbafb_defined with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26NET: declance: Fix section mismatchesRalf Baechle
WARNING: drivers/net/built-in.o(.data+0x24): Section mismatch in reference from the variable dec_lance_tc_driver to the function .init.text:dec_lance_tc_probe() The variable dec_lance_tc_driver references the function __init dec_lance_tc_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing this one results in a new mismatch: WARNING: drivers/net/built-in.o(.devinit.text+0x14): Section mismatch in reference from the function dec_lance_tc_probe() to the function .init.text:dec_lance_probe() The function __devinit dec_lance_tc_probe() references a function __init dec_lance_probe(). If dec_lance_probe is only used by dec_lance_tc_probe then annotate dec_lance_probe with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26VIDEO. gbefb: Fix section mismatches.Ralf Baechle
WARNING: drivers/video/built-in.o(.devinit.text+0x54): Section mismatch in reference from the function gbefb_probe() to the function .init.text:gbefb_setup() The function __devinit gbefb_probe() references a function __init gbefb_setup(). If gbefb_setup is only used by gbefb_probe then annotate gbefb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x208): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:mode_option The function __devinit gbefb_probe() references a variable __initdata mode_option. If mode_option is only used by gbefb_probe then annotate mode_option with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x214): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_mode The function __devinit gbefb_probe() references a variable __initdata default_mode. If default_mode is only used by gbefb_probe then annotate default_mode with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x23c): Section mismatch in reference from the function gbefb_probe() to the variable .init.data:default_var The function __devinit gbefb_probe() references a variable __initdata default_var. If default_var is only used by gbefb_probe then annotate default_var with a matching annotation. Fixing these results in more mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_LCD The function __devinit gbefb_setup() references a variable __initdata default_var_LCD. If default_var_LCD is only used by gbefb_setup then annotate default_var_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x14c): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_LCD The function __devinit gbefb_setup() references a variable __initdata default_mode_LCD. If default_mode_LCD is only used by gbefb_setup then annotate default_mode_LCD with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x150): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_var_CRT The function __devinit gbefb_setup() references a variable __initdata default_var_CRT. If default_var_CRT is only used by gbefb_setup then annotate default_var_CRT with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x154): Section mismatch in reference from the function gbefb_setup() to the variable .init.data:default_mode_CRT The function __devinit gbefb_setup() references a variable __initdata default_mode_CRT. If default_mode_CRT is only used by gbefb_setup then annotate default_mode_CRT with a matching annotation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26drm/i915: Clear any existing dither mode prior to enabling spatial ditheringChris Wilson
We cannot the initial configuration set by the BIOS not to have a dither mode enabled which conflicts with our enabling the Spatial Temporal 1 dither mode for PCH. In particular, the BIOS may either enable temporal dithering or the Spatial Temporal 2 with the result that we enable pure temporal dithering. Temporal dithering looks bad and is perceived as a flicker. Fixes: Bug 29248 - [Arrandale] Annoying flicker on internal panel, goes away after suspend to RAM https://bugs.freedesktop.org/show_bug.cgi?id=29248 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26drm/i915: handle shared framebuffers when flippingJesse Barnes
If a framebuffer is shared across CRTCs, the x,y position of one of them is likely to be something other than the origin (e.g. for extended desktop configs). So calculate the offset at flip time so such configurations can work. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=28518. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Thomas M. <tmezzadra@gmail.com> Tested-by: fangxun <xunx.fang@intel.com> Cc: stable@kernel.org Signed-off-by: Eric Anholt <eric@anholt.net>
2010-07-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.text ARM: 6263/1: ns9xxx: fix FTBFS for zImage ARM: 6262/1: arm/clps711x: fix debug macro compilation failure ARM: 6261/1: arm/shark: fix debug macro compilation failure ARM: 6260/1: arm/plat-spear: fix debug macro compilation failure ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failure ARM: 6258/1: arm/h720x: fix debug macro compilation failure ARM: 6233/1: Delete a wrong redundant right parenthesis ARM: 6230/1: fix nuc900 touchscreen clk definition bug [ARM] pxa: fix incorrect CONFIG_CPU_PXA27x to CONFIG_PXA27x [ARM] pxa/colibri-pxa300: fix AC97 init [ARM] pxa: fix incorrect order of AC97 reset pin configs [ARM] pxa: fix frequency scaling for pcmcia/pxa2xx_base [ARM] pxa: cpufreq-pxa2xx: fix DRI recomputation routine [ARM] pxa/corgi: fix MMC/SD card detection failure
2010-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: tpm_tis: fix subsequent suspend failures
2010-07-26Merge branch 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.35' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Use kmalloc() instead of vmalloc() for KVM_[GS]ET_MSR KVM: MMU: fix conflict access permissions in direct sp
2010-07-26quiesce EDAC initialisation on desktop/mobile i7Daniel J Blueman
Don't print failure to detect Core i7 EDAC facilities to the console at boot time, most often occurring on Core i7 desktops and laptops. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI / Sleep: Allow the NVS saving to be skipped during suspend to RAM ACPI: create "processor.bm_check_disable" boot param ACPI: skip checking BM_STS if the BIOS doesn't ask for it ACPI: fix unused function warning ACPI: processor: fix processor_physically_present on UP ACPI video: fix string mismatch for Sony SR290 laptop ACPI battery: don't invoke power_supply_changed twice when battery is hot-added ACPI: handle systems which asynchoronously enable ACPI mode
2010-07-26Driver-core: Always create class directories for classses that support ↵Eric W. Biederman
namespaces. This fixes the regression in 2.6.35-rcX where bluetooth network devices would fail to be deleted from sysfs, causing their destruction and recreation to fail. In addition this fixes the mac80211_hwsim driver where it would leave around sysfs files when the driver was removed. This problem is discussed at https://bugzilla.kernel.org/show_bug.cgi?id=16257 The reason for the regression is that the network namespace support added to sysfs expects and requires that network devices be put in directories that can contain only network devices. Today get_device_parent almost provides that guarantee for all class devices, except for a specific exception when the parent of a class devices is a class device. It would be nice to simply remove that arguably incorrect special case, but apparently the input devices depend on it being there. So I have only removed it for class devices with network namespace support. Which today are the network devices. It has been suggested that a better fix would be to change the parent device from a class device to a bus device, which in the case of the bluetooth driver would change /sys/class/bluetooth to /sys/bus/bluetoth, I can not see how we would avoid significant userspace breakage if we were to make that change. Adding an extra directory in the path to the device will also be userspace visible but it is much less likely to break things. Everything is still accessible from /sys/class (for example), and it fixes two bugs. Adding an extra directory fixes a 3 year old regression introduced with the new sysfs layout that makes it impossible to rename bnep0 network devices to names that conflict with hci device attributes like hci_revsion. Adding an additional directory removes the new failure modes introduced by the network namespace code. If it weren't for the regession in the renaming of network devices I would figure out how to just make the sysfs code deal with this configuration of devices. In summary this patch fixes regressions by changing: "/sys/class/bluetooth/hci0/bnep0" to "/sys/class/bluetooth/hci0/net/bnep0". Reported-by: Johannes Berg <johannes@sipsolutions.net> Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26virtio: fix oops on OOMMichael S. Tsirkin
virtio ring was changed to return an error code on OOM, but one caller was missed and still checks for vq->vring.num. The fix is just to check for <0 error code. Long term it might make sense to change goto add_head to just return an error on oom instead, but let's apply a minimal fix for 2.6.35. Reported-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Tested-by: Chris Mason <chris.mason@oracle.com> Cc: stable@kernel.org # .34.x Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26Input: RX51 keymap - fix recent compile breakageDmitry Torokhov
Commit 3fea60261e73 ("Input: twl40300-keypad - fix handling of "all ground" rows") broke compilation as I managed to use non-existent keycodes. Reported-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-26ARM: Fix csum_partial_copy_from_user()Russell King
Using the parent functions frame pointer to access our arguments is completely wrong, whether or not we're building with frame pointers or not. What we should be using is the stack pointer to get at the word above the registers we stacked ourselves. Reported-by: Bosko Radivojevic <bosko.radivojevic@gmail.com> Tested-by: Bosko Radivojevic <bosko.radivojevic@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6265/1: kirkwood: move qnap_tsx1x_register_flash() to .init.textUwe Kleine-König
qnap_tsx1x_register_flash is only called by qnap_ts219_init and qnap_ts41x_init which both live in .init.text, too. So the move is OK. This fixes the following warning in kirkwood_defconfig: WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info The function qnap_tsx1x_register_flash() references the variable __initdata qnap_tsx1x_spi_slave_info. This is often because qnap_tsx1x_register_flash lacks a __initdata annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6263/1: ns9xxx: fix FTBFS for zImageUwe Kleine-König
the different putc variants used an initialized local static variable which is broken since 5de813b (ARM: Eliminate decompressor -Dstatic= PIC hack) This needs to be initialized at runtime and so needs to be global. While at it give it a better name. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6262/1: arm/clps711x: fix debug macro compilation failureJeremy Kerr
We need mach/hardware.h for CLPS7111_VIRT_BASE. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6261/1: arm/shark: fix debug macro compilation failureJeremy Kerr
We need a waituart macro. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6260/1: arm/plat-spear: fix debug macro compilation failureJeremy Kerr
mov rx, =<immediate> isn't valid, use #<immediate> instead. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6259/1: arm/ns9xxx: fix debug macro compilation failureJeremy Kerr
We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h). Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26ARM: 6258/1: arm/h720x: fix debug macro compilation failureJeremy Kerr
IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need mach/hardware.h for these definitions. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-25net: dev_forward_skb should call nf_resetBen Greear
With conn-track zones and probably with different network namespaces, the netfilter logic needs to be re-calculated on packet receive. If the netfilter logic is not reset, it will not be recalculated properly. This patch adds the nf_reset logic to dev_forward_skb. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-26drm/nv50: fix some not-error error messagesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: introduce gpio engineBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nv50: correct wait condition for instmem flushBen Skeggs
Reported-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Fix TV-out detection on unposted cards lacking a usable DCB table.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Get rid of the remaining VGA CRTC locking.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Move display init to a new nouveau_engine.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Put back the old 2-messages I2C slave test.Francisco Jerez
I was hoping we could detect I2C devices at a given address without actually writing data into them, but apparently some DDC slaves get confused with 0-bytes transactions. Put the good old test back. Reported-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Reset AGP before running the init scripts.Francisco Jerez
BIOS scripts usually make an attempt to reset the AGP controller, however on some nv4x cards doing it properly involves switching FW off and on: if we do that without updating the AGP bridge settings accordingly (e.g. with the corresponding calls to agp_enable()) we will be locking ourselves out of the card MMIO space. Do it from nouveau_mem_reset_agp() before the init scripts are executed. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nv30: Init the PFB+0x3xx memory timing regs.Francisco Jerez
Fixes the randomly flashing vertical lines seen on some nv3x after a cold-boot. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: disable hotplug detect around DP link trainingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nv50: add function to control GPIO IRQ reportingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: add nv_mask register accessorBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: fix build without CONFIG_ACPIBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Reset CRTC owner to 0 before BIOS init.Francisco Jerez
Fixes suspend+multihead on some boards that also use BIOS scripts for modesetting. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: No need to lock/unlock the VGA CRTC regs all the time.Francisco Jerez
Locking only makes sense in the VBIOS parsing code as it's executed before CRTC init. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Remove useless CRTC_OWNER logging.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Add some generic I2C gadget detection code.Francisco Jerez
Clean up and move the external TV encoder detection code to nouveau_i2c.c, it's also going to be useful for external TMDS and DDC detection. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/i2c/ch7006: Don't assume that the specified config points to static memory.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nv04-nv3x: Implement init-compute-mem.Francisco Jerez
Init-compute-mem was the last piece missing for nv0x-nv3x card cold-booting. This implementation is somewhat lacking but it's been reported to work on most chipsets it was tested in. Let me know if it breaks suspend to RAM for you. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Tested-by: Patrice Mandin <patmandin@gmail.com> Tested-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Xavier Chantry <chantry.xavier@gmail.com> Tested-by: Marcin Kościelnicki <koriakin@0x04.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-26drm/nouveau: Add some PFB register defines.Francisco Jerez
Also collect all the PFB registers in a single place and remove some duplicated definitions. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 09:41:17 +0000