summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-13drm/nouveau: Fix a couple of sparse warnings.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv04-nv40: Disable connector polling when there're no spare CRTCs left.Francisco Jerez
Load detection needs the connector wired to a CRTC, when there are no inactive CRTCs left that means we need to cut some other head off for a while, causing intermittent flickering. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv04-nv40: Prevent invalid DAC/TVDAC combinations.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv17-nv40: Avoid using active CRTCs for load detection.Francisco Jerez
Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv50: when debugging on, log which crtc we connect an encoder toBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv50: supply encoder disable() hook for SOR outputsBen Skeggs
Allows us to remove a driver hack that used to be necessary to disable encoders in certain situations before setting up a mode. The DRM has better knowledge of when this is needed than the driver does. This fixes a number of display switching issues. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv50: DCB quirk for Dell M6300Ben Skeggs
Uncertain if this is a weirdo configuration, or a BIOS bug. If it's not a BIOS bug, we still don't know how to make it work anyway so ignore a "conflicting" DCB entry to prevent a display hang. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv50: fix DP->DVI if output has been programmed for native DP previouslyBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: downgrade severity of most init table parser errorsBen Skeggs
As long as we know the length of the opcode, we're probably better off trying to parse the remainder of an init table rather than aborting in the middle of it. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: tidy connector/encoder creation a littleBen Skeggs
Create connectors before encoders to avoid having to do another loop across encoder list whenever we create a new connector. This allows us to pass the connector to the encoder creation functions, and avoid using a create_resources() callback since we can now call it directly. This can also potentially modify the connector ordering on nv50. On cards where the DCB connector and encoder tables are in the same order, things will be unchanged. However, there's some cards where the ordering between the tables differ, and in one case, leads us to naming the connectors "wrongly". Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: set encoder for lvdsAlbert Damen
fixes oops in nouveau_connector_get_modes with nv_encoder is NULL Signed-off-by: Albert Damen <albrt@gmx.net> Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: Ignore broken legacy I2C entries.Francisco Jerez
The nv05 card in the bug report [1] doesn't have usable I2C port register offsets (they're all filled with zeros). Ignore them and use the defaults. [1] http://bugs.launchpad.net/bugs/569505 Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: Don't clear AGPCMD completely on INIT_RESET.Francisco Jerez
We just need to clear the SBA and ENABLE bits to reset the AGP controller: If the AGP bridge was configured to use "fast writes", clearing the FW bit would break the subsequent MMIO writes and eventually end with a lockup. Note that all the BIOSes I've seen do the same as we did (it works for them because they don't use MMIO), OTOH the blob leaves FW untouched. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: Put the dithering check back in nouveau_connector_create.Francisco Jerez
a7b9f9e5adef dropped it by accident. Signed-off-by: Francisco Jerez <currojerez@riseup.net> Tested-by: Thibaut Girka <thib@sitedethib.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nv50: fix memory detection for cards with >=4GiB VRAMBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: missed some bracesBen Skeggs
Luckily this had absolutely no effect whatsoever :) Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: remove left-over !DRIVER_MODESET pathsBen Skeggs
It's far preferable to have the driver do nothing at all for "nomodeset". Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: use drm_mm in preference to custom code doing the same thingBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: move LVDS detection back to connector detect() timeBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm/nouveau: place notifiers in system memory by defaultBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-07-13drm: disable encoder rather than dpms off in drm_crtc_prepare_encoders()Ben Skeggs
Original behaviour will be preserved for drivers that don't implement disable() hooks for an encoder. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-12Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-07-12Linux 2.6.35-rc5v2.6.35-rc5Linus Torvalds
2010-07-12Merge branch 'arm/defconfig/reduced-v2.6.35-rc1' of ↵Linus Torvalds
git://git.pengutronix.de/git/ukl/linux-2.6 * 'arm/defconfig/reduced-v2.6.35-rc1' of git://git.pengutronix.de/git/ukl/linux-2.6: ARM: reduce defconfigs This is a big change, but results in no loss of information, despite us losing almost 200k lines: 177 files changed, 652 insertions(+), 194157 deletions(-) and Grant Likely thinks powerpc can also use the same reduction technique. The python script that did the reduction looks like this: #! /usr/bin/env python # vim: set fileencoding=utf-8 : # Copyright (C) 2010 by Uwe Kleine-König <u.kleine-koenig@pengutronix.de> import re import subprocess import os import sys # This prevents including a timestamp in the .config which makes comparing a # bit easier. os.environ['KCONFIG_NOTIMESTAMP'] = 'Yes, please' # XXX: get these using getopt kernel_tree = '' # os.path.join(os.environ['HOME'], 'gsrc', 'linux-2.6') arch = 'arm' target = sys.argv[1] defconfig_src = os.path.join(kernel_tree, 'arch/%s/configs/%s' % (arch, target)) subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) origconfig = list(open('.config')) config = list(origconfig) config_size = os.stat('.config').st_size i = 0 while i < len(config): print 'test for %r' % config[i] defconfig = open(defconfig_src, 'w') defconfig.writelines(config[:i]) defconfig.writelines(config[i + 1:]) defconfig.close() subprocess.check_call(['make', '-s', 'ARCH=%s' % arch, target]) if os.stat('.config').st_size == config_size and list(open('.config')) == origconfig: del config[i] else: i += 1 defconfig = open(defconfig_src, 'w') defconfig.writelines(config) defconfig.close() which is pretty self-explanatory. Acked-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-12Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Restore cleared pin controls on resume
2010-07-12Merge branch 'v4l_for_2.6.35' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host drivers V4L/DVB: v4l: mem2mem_testdev: fix g_fmt NULL pointer dereference V4L/DVB: uvcvideo: Power line frequency control doesn't support GET_MIN/MAX/RES V4L/DVB: ivtv: Add delay to ensure the decoder always restarts with a blank screen V4L/DVB: Documentation: Add the Philips FQ1236 MK5 to video4linux/CARDLIST.tuner V4L/DVB: tveeprom: Add an entry for tuner code 168: a TCL M30WTP-4N-E tuner V4L/DVB: tuner: Add a definition for the Philips FQ1236 MK5 NTSC tuner V4L/DVB: OMAP_VOUT: fix: Module params were not working through bootargs V4L/DVB: OMAP_VOUT: fix: Replaced dma-sg with dma-contig V4L/DVB: OMAP_VOUT:Build FIX: Rebased against latest DSS2 changes
2010-07-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Send Report ID when numbered reports are sent over the control endpoint. HID: Enable HID_QUIRK_MULTI_INPUT for Retro Adaptor HID: add support for CH Eclipse yoke HID: eliminate a double lock in debug code HID: ntrig: add support for new firwmare versions HID: check for HID_QUIRK_IGNORE during probing HID: roccat: fix modules interdependencies
2010-07-12MAINTAINERS: fix EDAC-I7CORE file patternsJoe Perches
File patterns are one per line. Fixed include file location. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-07-12ocfs2: tighten up strlen() checkingDan Carpenter
This function is only called from one place and it's like this: dlm_register_domain(conn->cc_name, dlm_key, &fs_version); The "conn->cc_name" is 64 characters long. If strlen(conn->cc_name) were equal to O2NM_MAX_NAME_LEN (64) that would be a bug because strlen() doesn't count the NULL character. In fact, if you look how O2NM_MAX_NAME_LEN is used, it mostly describes 64 character buffers. The only exception is nd_name from struct o2nm_node. Anyway I looked into it and in this case the domain string comes from osb->uuid_str in ocfs2_setup_osb_uuid(). That's 32 characters and NULL which easily fits into O2NM_MAX_NAME_LEN. This patch doesn't change how the code works, but I think it makes the code a little cleaner. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-12ocfs2: Make xattr reflink work with new local alloc reservation.Tao Ma
The new reservation code in local alloc has add the limitation that the caller should handle the case that the local alloc doesn't give use enough contiguous clusters. It make the old xattr reflink code broken. So this patch udpate the xattr reflink code so that it can handle the case that local alloc give us one cluster at a time. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-12ocfs2: make xattr extension work with new local alloc reservation.Tao Ma
The old ocfs2_xattr_extent_allocation is too optimistic about the clusters we can get. So actually if the file system is too fragmented, ocfs2_add_clusters_in_btree will return us with EGAIN and we need to allocate clusters once again. So this patch change it to a while loop so that we can allocate clusters until we reach clusters_to_add. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-12ocfs2: Remove the redundant cpu_to_le64.Tao Ma
In ocfs2_block_group_alloc, we set c_blkno by bg->bg_blkno. But actually bg->bg_blkno is already changed to little endian in ocfs2_block_group_fill. So remove the extra cpu_to_le64. Reported-by: Marcos Matsunaga <Marcos.Matsunaga@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-12ocfs2/dlm: don't access beyond bitmap sizeWengang Wang
dlm->recovery_map is defined as unsigned long recovery_map[BITS_TO_LONGS(O2NM_MAX_NODES)]; We should treat O2NM_MAX_NODES as the bit map size in bits. This patches fixes a bit operation that takes O2NM_MAX_NODES + 1 as bitmap size. Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-07-12ocfs2: No need to zero pages past i_size.Joel Becker
When ocfs2 fills a hole, it does so by allocating clusters. When a cluster is larger than the write, ocfs2 must zero the portions of the cluster outside of the write. If the clustersize is smaller than a pagecache page, this is handled by the normal pagecache mechanisms, but when the clustersize is larger than a page, ocfs2's write code will zero the pages adjacent to the write. This makes sure the entire cluster is zeroed correctly. Currently ocfs2 behaves exactly the same when writing past i_size. However, this means ocfs2 is writing zeroed pages for portions of a new cluster that are beyond i_size. The page writeback code isn't expecting this. It treats all pages past the one containing i_size as left behind due to a previous truncate operation. Thankfully, ocfs2 calculates the number of pages it will be working on up front. The rest of the write code merely honors the original calculation. We can simply trim the number of pages to only cover the actual file data. Signed-off-by: Joel Becker <joel.becker@oracle.com> Cc: stable@kernel.org
2010-07-12ARM: Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-12ACPI: processor: fix processor_physically_present on UPAlex Chiang
The commit 5d554a7bb06 (ACPI: processor: add internal processor_physically_present()) is broken on uniprocessor (UP) configurations, as acpi_get_cpuid() will always return -1. We use the value of num_possible_cpus() to tell us whether we got an invalid cpuid from acpi_get_cpuid() in the SMP case, or if instead, we are UP, in which case num_possible_cpus() is #defined as 1. We use num_possible_cpus() instead of num_online_cpus() to protect ourselves against the scenario of CPU hotplug, and we've taken down all the CPUs except one. Thanks to Jan Pogadl for initial report and analysis and Chen Gong for review. https://bugzilla.kernel.org/show_bug.cgi?id=16357 Reported-by: Jan Pogadl <pogadl.jan@googlemail.com>: Reviewed-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Alex Chiang <achiang@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-07-12KVM: MMU: flush remote tlbs when overwriting spte with different pfnXiao Guangrong
After remove a rmap, we should flush all vcpu's tlb Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-07-11r8169: incorrect identifier for a 8168dpFrancois Romieu
Merge error. See CFG_METHOD_8 (0x3c800000 + 0x00300000) since version 8.002.00 of Realtek's driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-11HID: Send Report ID when numbered reports are sent over the control endpoint.Alan Ott
The Report ID wasn't sent as part of the payload for reports which were sent over the control endpoint. This is required by section 8.1 of the HID spec. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11V4L/DVB: uvc: Fix multiple symbols definitions with UVC gadget and host driversLaurent Pinchart
The UVC gadget driver borrowed code from the UVC host driver without changing the symbol names. This results in a namespace clash with multiple definitions of several symbols when compiling both drivers in the kernel. Make all generic UVC functions and variables static in the UVC gadget driver, as the symbols are not referenced outside of the gadget driver. Rename the uvc_trace_param global variable to uvc_gadget_trace_param. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-07-11Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix autoloading of fschmd on recent Fujitsu machines hwmon: (coretemp) Properly label the sensors hwmon: (coretemp) Skip duplicate CPU entries hwmon: (it87) Fix in7 on IT8720F hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions
2010-07-11Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c/mips: Fix error return codes from Sibyte i2c bus driver i2c: Fix probability check
2010-07-11HID: Enable HID_QUIRK_MULTI_INPUT for Retro AdaptorPeter Edwards
Patch for linux-2.6.35-rc4 mainline kernel to enable Paul Qureshi's Retro Adapter [http://keio.dk/retroadapter.html], an open source USB device which allows controllers and joysticks from classic computers and consoles to work on modern PCs, to appear as two separate devices under Linux. Signed-off-by: Peter Edwards <samwise@bagshot-row.org> Acked-by: Paul Qureshi <retro@world3.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: add support for CH Eclipse yokeJonathan Rockway
This USB flight yoke needs the NOGET quirk, like most of CH's other products. This patch adds that. Signed-off-by: Jonathan Rockway <jon@jrock.us> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11powerpc/fsl-booke: Fix address issue when using relocatable kernelsMatthew McClintock
When booting a relocatable kernel it needs to jump to the correct start address, which for BookE parts is usually unchanged regardless of the physical memory offset. Recent changes cause problems with how we calculate the start address, it was always adding the RMO into the start address which is incorrect. This patch only adds in the RMO offset if we are in the kexec code path, as it needs the RMO to work correctly. Instead of adding the RMO offset in in the common code path, we can just set r6 to the RMO offset in the kexec code path instead of to zero, and finally perform the masking in the common code path Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-11powerpc/cpm1: Mark micropatch code/data static and __initAnton Vorontsov
This saves runtime memory and fixes lots of sparse warnings like this: CHECK arch/powerpc/sysdev/micropatch.c arch/powerpc/sysdev/micropatch.c:27:6: warning: symbol 'patch_2000' was not declared. Should it be static? arch/powerpc/sysdev/micropatch.c:146:6: warning: symbol 'patch_2f00' was not declared. Should it be static? ... Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-11powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinationsAnton Vorontsov
Warnings are treated as errors for arch/powerpc code, so build fails with CONFIG_I2C_SPI_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:630: warning: unused variable 'smp' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 And with CONFIG_USB_SOF_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:629: warning: unused variable 'spp' arch/powerpc/sysdev/micropatch.c:628: warning: unused variable 'iip' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 This patch fixes these issues by introducing proper #ifdefs. Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-11powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)Anton Vorontsov
spi_t was removed in commit 644b2a680ccc51a9ec4d6beb12e9d47d2dee98e2 ("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But it appears that the struct is needed for micropatch code. So, let's reintroduce the struct. Fixes the following build issue: CC arch/powerpc/sysdev/micropatch.o micropatch.c: In function 'cpm_load_patch': micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token micropatch.c:629: error: 'spp' undeclared (first use in this function) micropatch.c:629: error: (Each undeclared identifier is reported only once micropatch.c:629: error: for each function it appears in.) Reported-by: LEROY Christophe <christophe.leroy@c-s.fr> Reported-by: Tony Breeds <tony@bakeyournoodle.com> Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-10ARM: lockdep: fix unannotated irqs-onRussell King
CPU: Testing write buffer coherency: ok ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:3145 check_flags+0xcc/0x1dc() Modules linked in: [<c0035120>] (unwind_backtrace+0x0/0xf8) from [<c0355374>] (dump_stack+0x20/0x24) [<c0355374>] (dump_stack+0x20/0x24) from [<c0060c04>] (warn_slowpath_common+0x58/0x70) [<c0060c04>] (warn_slowpath_common+0x58/0x70) from [<c0060c3c>] (warn_slowpath_null+0x20/0x24) [<c0060c3c>] (warn_slowpath_null+0x20/0x24) from [<c008f224>] (check_flags+0xcc/0x1dc) [<c008f224>] (check_flags+0xcc/0x1dc) from [<c00945dc>] (lock_acquire+0x50/0x140) [<c00945dc>] (lock_acquire+0x50/0x140) from [<c0358434>] (_raw_spin_lock+0x50/0x88) [<c0358434>] (_raw_spin_lock+0x50/0x88) from [<c00fd114>] (set_task_comm+0x2c/0x60) [<c00fd114>] (set_task_comm+0x2c/0x60) from [<c007e184>] (kthreadd+0x30/0x108) [<c007e184>] (kthreadd+0x30/0x108) from [<c0030104>] (kernel_thread_exit+0x0/0x8) ---[ end trace 1b75b31a2719ed1c ]--- possible reason: unannotated irqs-on. irq event stamp: 3 hardirqs last enabled at (2): [<c0059bb0>] finish_task_switch+0x48/0xb0 hardirqs last disabled at (3): [<c002f0b0>] ret_slow_syscall+0xc/0x1c softirqs last enabled at (0): [<c005f3e0>] copy_process+0x394/0xe5c softirqs last disabled at (0): [<(null)>] (null) Fix this by ensuring that the lockdep interrupt state is manipulated in the appropriate places. We essentially treat userspace as an entirely separate environment which isn't relevant to lockdep (lockdep doesn't monitor userspace.) We don't tell lockdep that IRQs will be enabled in that environment. Instead, when creating kernel threads (which is a rare event compared to entering/leaving userspace) we have to update the lockdep state. Do this by starting threads with IRQs disabled, and in the kthread helper, tell lockdep that IRQs are enabled, and enable them. This provides lockdep with a consistent view of the current IRQ state in kernel space. This also revert portions of 0d928b0b616d1c5c5fe76019a87cba171ca91633 which didn't fix the problem. Tested-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-10i2c/mips: Fix error return codes from Sibyte i2c bus driverGuenter Roeck
Sibyte i2c bus driver returns non-descriptive error values. Update to return error values as defined in Documentation/i2c/fault-codes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit (git 2.34.1) at 2025-09-13 13:24:43 +0000