summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-28KVM: vmx: count exits to userspace during invalid guest emulationPaolo Bonzini
These will happen due to MMIO. Suggested-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-28pinctrl: Add s5pv210 support to pinctrl-exynosMateusz Krawczuk
This patch implements pinctrl support and adds device tree bindings for s5pv210. Signed-off-by: Mateusz Krawczuk <m.krawczuk@partner.samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: utils: include export.h to avoid warningsLaxman Dewangan
Include "linux/export.h" to avoid following warnings during compilation: /*** pinctrl/pinctrl-utils.c:53:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:53:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:53:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:70:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:70:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:70:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:98:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:98:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:98:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:122:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:122:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:122:1: warning: parameter names (without types) in function declaration [enabled by default] pinctrl/pinctrl-utils.c:135:1: warning: data definition has no type or storage class [enabled by default] pinctrl/pinctrl-utils.c:135:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' [-Wimplicit-int] pinctrl/pinctrl-utils.c:135:1: warning: parameter names (without types) in function declaration [enabled by default] **/ Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28spi: altera: Simplify altera_spi_txrx implementation for noirq caseAxel Lin
This patch simplifies the code and makes it better in readability. Now the logic in the while loop is simply "write to ALTERA_SPI_TXDATA then read from ALTERA_SPI_TXDATA". There is a slightly logic change because now we avoid a read-write cycle when hw->len is 0. Since the code in bitbang library will call bitbang->txrx_bufs() only when t->len is not 0, this is not a problem. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-28pinctrl: s3c24xx: off by one in s3c24xx_eint_init()Dan Carpenter
If "irq == NUM_EINT" then it writes one space beyond the end of the eint_data->domains[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: mvebu: testing the wrong variableDan Carpenter
We wanted to test "*map" here instead of "map". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: abx500: fix bitwise AND testDan Carpenter
The intent here was to test if the bit was set or not but there is a logical vs bitwise AND typo so it is true if any bits are set. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: mvebu: Convert to use devm_ioremap_resourceJisheng Zhang
The resource mapped by of_iomap() isn't unmapped in error path. This patch fix the resource leakage by using devm_ioremap_resource() instead of of_iomap(). Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: Pass all configs to driver on pin_config_set()Sherman Yin
When setting pin configuration in the pinctrl framework, pin_config_set() or pin_config_group_set() is called in a loop to set one configuration at a time for the specified pin or group. This patch 1) removes the loop and 2) changes the API to pass the whole pin config array to the driver. It is now up to the driver to loop through the configs. This allows the driver to potentially combine configs and reduce the number of writes to pin config registers. All c files changed have been build-tested to verify the change compiles and that the corresponding .o is successfully generated. Signed-off-by: Sherman Yin <syin@broadcom.com> Reviewed-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Matt Porter <matt.porter@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: tz1090-pdc: Convert to devm_ioremap_resourceAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: tz1090: Convert to devm_ioremap_resourceAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: tegra: Convert to devm_ioremap_resourceAxel Lin
Using the new devm_ioremap_resource() we can greatly simplify resource handling. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: rockchip: Simplify pin_to_bank equationAxel Lin
If (b->pin_base + b->nr_pins - 1) < pin is true, pin >= b->pin_base is always true because b->nr_pins is never less than 0. Thus this patch simplify the equation. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: spear: Convert to devm_ioremap_resourceAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: rockchip: Remove of_match_ptr macro for DT only driverAxel Lin
This is a DT only driver and rockchip_pinctrl_dt_match is always compiled in. Thus remove of_match_ptr macro. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: palmas: PINCTRL_PALMAS needs to select PINMUXAxel Lin
Fix below build error if !PINMUX. CC drivers/pinctrl/pinctrl-palmas.o drivers/pinctrl/pinctrl-palmas.c:741:21: error: variable 'palmas_pinmux_ops' has initializer but incomplete type drivers/pinctrl/pinctrl-palmas.c:742:2: error: unknown field 'get_functions_count' specified in initializer drivers/pinctrl/pinctrl-palmas.c:742:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:742:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] drivers/pinctrl/pinctrl-palmas.c:743:2: error: unknown field 'get_function_name' specified in initializer drivers/pinctrl/pinctrl-palmas.c:743:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:743:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] drivers/pinctrl/pinctrl-palmas.c:744:2: error: unknown field 'get_function_groups' specified in initializer drivers/pinctrl/pinctrl-palmas.c:744:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:744:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] drivers/pinctrl/pinctrl-palmas.c:745:2: error: unknown field 'enable' specified in initializer drivers/pinctrl/pinctrl-palmas.c:745:2: warning: excess elements in struct initializer [enabled by default] drivers/pinctrl/pinctrl-palmas.c:745:2: warning: (near initialization for 'palmas_pinmux_ops') [enabled by default] make[2]: *** [drivers/pinctrl/pinctrl-palmas.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28pinctrl: core: Add proper mutex lock in pinctrl_request_gpioAxel Lin
This one is missed in commit 42fed7ba "pinctrl: move subsystem mutex to pinctrl_dev struct". I think this fixes the race between pin_free() and pin_request() calls. It protects accessing the members of pctldev->desc. (e.g. update desc->mux_usecount, desc->gpio_owner, desc->mux_owner, etc) Current code grabs pctldev->mutex before calling pinmux_free_gpio(), but did not grab the mutex while calling pinmux_request_gpio(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-28i2c: sirf: retry 3 times as sometimes we get random noack and timeoutZhiwu Song
let i2c core retry 3 times as sometimes we get random noack and timeout even when we access an existing i2c client. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28i2c: sirf: support reverse direction of addressZhiwu Song
if users set I2C_M_REV_DIR_ADDR, revert the direction of address. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28i2c: sirf: fix the typo for setting bitrate to less than 100kZhiwu Song
there is a typo before, it makes the final bitrate wrong, this patch fixes it. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28i2c: sirf: we need to wait I2C_RESET status in resumeZhiwu Song
this fixes the issue that we lost to wait the i2c reset finished. Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28i2c: sirf: reset i2c controller early after we get a noackZhiwu Song
Due to hardware ANOMALY, we need to reset I2C earlier after we get NOACK while accessing non-existing clients, otherwise we will get errors even we access existing clients later Signed-off-by: Zhiwu Song <Zhiwu.Song@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28batman-adv: send GW_DEL event when the gw client mode is deselectedAntonio Quartulli
Whenever the GW client mode is deselected, a DEL event has to be sent in order to tell userspace that the current gateway has been lost. Send the uevent on state change only if a gateway was currently selected. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-08-28batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28batman-adv: move enum definition at the top of the fileAntonio Quartulli
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28batman-adv: set skb priority according to contentSimon Wunderlich
The skb priority field may help the wireless driver to choose the right queue (e.g. WMM queues). This should be set in batman-adv, as this information is only available here. This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that only VLAN PCP is used if a VLAN header is present. Also initially set TC_PRIO_CONTROL only for self-generated packets, and keep the priority set by higher layers. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-08-28i2c: designware: get SDA hold time, HCNT and LCNT configuration from ACPIMika Westerberg
Some Intel LPSS I2C devices make the SDA hold time and *CNT parameters available via SSCN (standard mode) and FMCN (fast mode) ACPI methods. Implement support for this so that we check whether an ACPI method exists and if it does, fill in the SDA hold time and *CNT values to the device private structure for core to use. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28i2c: designware: make HCNT/LCNT values configurableMika Westerberg
The DesignWare I2C controller has high count (HCNT) and low count (LCNT) registers for each of the I2C speed modes (standard and fast). These registers are programmed based on the input clock speed in the driver. The current code calculates these values based on the input clock speed and tries hard to meet the I2C bus timing requirements. This could result non-optimal values with regarding to the bus speed. For example on Intel BayTrail we get bus speed of 315.41kHz which is ~20% slower than we would expect (400kHz) in fast mode (even though the timing requirements are met). This patch makes it possible for the platform code to pass more optimal HCNT/LCNT values to the core driver if they are known beforehand. If these are not set we use the calculated and more conservative values. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Shinya Kuribayashi <skuribay@pobox.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28i2c: mpc: cleanup clock API useGerhard Sittig
make the MPC I2C driver get, prepare and enable the gated clock item for register access during probe; disable and unprepare the clock upon remove(), put is done by the devm approach; hold a reference to the clock over the period of use clock lookup is non-fatal in this implementation as not all platforms may provide clock specs in their device tree, but failure to enable a clock when specified is considered fatal Signed-off-by: Gerhard Sittig <gsi@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28Merge tag 'edac_fixes_for_3.12' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras Pull RAS fixes from Boris Petkov: "Two fixlets for Erratum 505 ranges and overflowing variables." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-28[media] v4l: vsp1: Fix mutex double lock at streamon timeLaurent Pinchart
A mutex_lock() was left when the driver was converted to use the vb2 ioctl helpers, resulting in a deadlock at streamon time. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-28[media] v4l: vsp1: Add support for RT clockLaurent Pinchart
The VSPR and VSPS instances use two clocks, the VSP1 system clock and the VSP1 realtime clock. Both of them need to be enabled to access the VSP1 registers. Add support for an optional RT clock and enable/disable it along with the system clock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-28[media] v4l: vsp1: Initialize media device bus_info fieldLaurent Pinchart
Fill bus_info with the VSP1 platform device name Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-28i2c: pnx: fix error return code in i2c_pnx_probe()Wei Yongjun
Fix to return a negative error code in the irq get error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> [wsa: fixed wrong exit point, too] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28i2c: ismt: add error return code in probe()Wolfram Sang
Return error code in the error case, and not success. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-28ARM: OMAP2+: Remove old display drivers from omap2plus_defconfigTomi Valkeinen
The old display drivers are no longer used, and will be phased out. So remove them from the omap2plus_defconfig. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: AM3517EVM: use new display driversTomi Valkeinen
Use new display drivers for AM3517EVM board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Note: the management of LCD GPIOs is unclear. They were originally muxed as inputs, and LCD_PANEL_PWR was labelled as "dvi enable". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: Zoom: use new display driversTomi Valkeinen
Use new display drivers for Zoom board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: Pandora: use new display driversTomi Valkeinen
Use new display drivers for OMAP3 Pandora board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: OMAP3EVM: use new display driversTomi Valkeinen
Use new display drivers for OMAP3EVM board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: 3430SDP: use new display driversTomi Valkeinen
Use new display drivers for 3430SDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: H4: use new display driversTomi Valkeinen
Use new display drivers for H4 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: cm-t35: use new display driversTomi Valkeinen
Use new display drivers for cm-t35 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: igep0020: use new display driversTomi Valkeinen
Use new display drivers for igep0020 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: omap3stalker: use new display driversTomi Valkeinen
Use new display drivers for OMAP3 Stalker board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: LDP: use new display driversTomi Valkeinen
Use new display drivers for LDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: 2430SDP: use new display driversTomi Valkeinen
Use new display drivers for 2430SDP board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: devkit8000: use new display driversTomi Valkeinen
Use new display drivers for devkit8000 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: beagle: use new display driversTomi Valkeinen
Use the new display drivers for Beagleboard. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2013-08-28ARM: OMAP: rx51: use new display driversTomi Valkeinen
Use the new display drivers for RX51 board. The new OMAP display drivers were merged for 3.11, and we can now change the board files to use the new ones and phase out the old ones. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-10-03 09:44:04 +0000