summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-22drm/vmwgfx: Use kasprintfHimanshu Jha
Use kasprintf instead of combination of kmalloc and sprintf. Also, remove the local variables used for storing the string length as they are not required now. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Get rid of the device-private suspended memberThomas Hellstrom
It was used to early block fbdev dirty processing. Replace it with an unprotected check of the par->dirty.active field. While this might race with the vmw_fb_off() function, we do a protected check later so the race will at worst lead to grabbing and releasing a couple of locks. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Improve on hibernationThomas Hellstrom
Make it possible to hibernate also with masters that don't switch VT at hibernation time. We save and restore modesetting state unless fbdev is active and enabled at hibernation time. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2018-03-22drm/vmwgfx: Avoid pinning fbdev framebuffersThomas Hellstrom
fbdev framebuffers were previously pinned to be able to keep them mapped across updates. This commit introduces a mechanism that instead revalidates the map on each update, keeping the map cached across updates. The cached map is torn down if the underlying pages change. Typically on buffer object moves and swapouts. This should be nicer to the system when we have resource contention. Testing done: Basic fbdev functionality under Fedora 27. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22drm/vmwgfx: Fix multiple command buffer context useThomas Hellstrom
The start / stop and preempt commands don't honor the context argument but rather acts on all available contexts. Also add detection for context 1 availability. Note that currently there's no driver interface for submitting buffers using the high-priority command queue (context 1). Testing done: Change the default context for command submission to 1 instead of 0, verify basic desktop functionality including faulty command injection and recovery. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Deepak Rawat <drawat@vmware.com>
2018-03-22drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blitsThomas Hellstrom
This blit was previously performed using two large vmaps, one of which was teared down and remapped on each blit. Use the more resource- conserving TTM cpu blit instead. The blit is used in boundary-box computing mode which makes it possible to minimize the bounding box used in host operations. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bosThomas Hellstrom
The utility uses kmap_atomic() instead of vmapping the whole buffer object. As a result there will be more book-keeping but on some architectures this will help avoid exhausting vmalloc space and also avoid expensive TLB flushes. The blit utility also adds a provision to compute a bounding box of changed content, which is very useful to optimize presentation speed of ill-behaved applications that don't supply proper damage regions, and for page-flips. The cost of computing the bounding box is not that expensive when done in a cpu-blit utility like this. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22media: s5p-mfc: Adding initial support for MFC v10.10Smitha T Murthy
Adding the support for MFC v10.10, with new register file and necessary hw control, decoder, encoder and structural changes. Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: s5p-mfc: Rename IS_MFCV8 macroSmitha T Murthy
This patch renames macro IS_MFCV8 to IS_MFCV8_PLUS so that the MFCv8 code can be resued for MFCv10.10 support. Since the MFCv8 specific code holds good for MFC v10.10 also. Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: extended-controls.rst: don't use adjustboxMauro Carvalho Chehab
LaTeX adjustbox is known to cause pdf documentation build breakages with some newer Sphinx versions. So, don't use it. While here, adjust table sizes in order to better produce the pdf output. Fixes: c0da55b95bd9 ("media: v4l2: Documentation for HEVC CIDs") Cc: Smitha T Murthy <smitha.t@samsung.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: v4l2: Documentation for HEVC CIDsSmitha T Murthy
Added V4L2 controls for HEVC encoder. with V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN_10 to match the code. [s.nawrocki@samsung.com]: Replaced V4L2_MPEG_VIDEO_HEVC_PROFILE_MAIN10 Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: v4l2: Add v4l2 control IDs for HEVC encoderSmitha T Murthy
Add v4l2 controls for HEVC encoder Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: v4l2: Documentation of HEVC compressed formatSmitha T Murthy
Add V4L2 definition for HEVC compressed format which is also known as H.265. Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: v4l2-ioctl: add HEVC format descriptionSmitha T Murthy
HEVC is a video coding format Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: videodev2.h: Add v4l2 definition for HEVCSmitha T Murthy
Add V4L2 definition for HEVC compressed format Signed-off-by: Smitha T Murthy <smitha.t@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: rcar-vin: use scratch buffer and always run in continuous modeNiklas Söderlund
Instead of switching capture mode depending on how many buffers are available use a scratch buffer and always run in continuous mode. By using a scratch buffer the responsiveness of the capture loop is increased as it can keep running even if there are no buffers available from userspace. As soon as a userspace queues a buffer it is inserted into the capture loop and returned as soon as it is filled. This is a improvement on the previous logic where the whole capture loop was stopped and switched to single capture mode if userspace did not feed the VIN driver buffers at the same time it consumed them. To make matters worse it was difficult for the driver to reenter continuous mode if it entered single mode even if userspace started to queue buffers faster. This resulted in suboptimal performance where if userspace where delayed for a short period the ongoing capture would be slowed down and run in single mode until the capturing process where restarted. An additional effect of this change is that the capture logic can be made much simple as we know that continuous mode will always be used. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: rcar-vin: allocate a scratch buffer at stream startNiklas Söderlund
Before starting a capture, allocate a scratch buffer which can be used by the driver to give to the hardware if no buffers are available from userspace. The buffer is not used in this patch but prepares for future refactoring where the scratch buffer can be used to avoid the need to fallback on single capture mode if userspace can't queue buffers as fast as the VIN driver consumes them. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: pixfmt-v4l2.rst: fix broken enum :c:typeHans Verkuil
:c:type:: -> :c:type: Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: imx.rst: fix typoHans Verkuil
Multpiple -> Multiple Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: ngene: avoid unused variable warningArnd Bergmann
The newly added pdev variable is only used in an #ifdef, causing a build warning without CONFIG_PCI_MSI, unless we move the declaration inside the same #ifdef: drivers/media/pci/ngene/ngene-core.c: In function 'ngene_start': drivers/media/pci/ngene/ngene-core.c:1328:17: error: unused variable 'pdev' [-Werror=unused-variable] Fixes: 6795bf626482 ("media: ngene: convert kernellog printing from printk() to dev_*() macros") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: v4l: omap_vout: vrfb: remove an unused variableArnd Bergmann
We now get a warning after the 'dmadev' variable is no longer used: drivers/media/platform/omap/omap_vout_vrfb.c: In function 'omap_vout_prepare_vrfb': drivers/media/platform/omap/omap_vout_vrfb.c:239:21: error: unused variable 'dmadev' [-Werror=unused-variable] Fixes: 8f0aa38292f2 ("media: v4l: omap_vout: vrfb: Use the wrapper for prep_interleaved_dma()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: ttpci: improve printing of encoded MAC addressDaniel Scheller
When loading the budget_av driver for ie. a KNC1 DVB-C TDA10024 card, which makes use of the ttpci eeprom check functionality (that always fails on these cards, but that's no issue at all), this is printed to the kernel log: [ 10.497333] saa7146 (0): dma buffer size 192512 [ 10.497335] dvbdev: DVB: registering new adapter (KNC1 DVB-C TDA10024) [ 10.545007] adapter failed MAC signature check [ 10.545009] encoded MAC from EEPROM was [ 10.545010] ff: [ 10.545011] ff: [ 10.545011] ff: ... [ 10.545021] ff [ 10.832422] budget_av: KNC1-4: MAC addr = 00:09:d6:6d:b3:be with the 'ff' being repeated for a total of 20 times. Improve that by using the %*phC format specifier instead dprintk()'ing every byte of the encoded MAC separately. This obsoletes the int i, and the kernel log looks cleaner: [ 3234.383153] saa7146 (0): dma buffer size 192512 [ 3234.383154] dvbdev: DVB: registering new adapter (KNC1 DVB-C TDA10024) [ 3234.428745] adapter failed MAC signature check [ 3234.428747] encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff [ 3234.728194] budget_av: KNC1-0: MAC addr = 00:09:d6:6d:b3:be Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: V4L: remove myself as soc-camera maintainerGuennadi Liakhovetski
The soc-camera framework is deprecated, patches for it are very rare and only contain trivial clean up. Further I haven't got any more soc-camera systems running modern kernels. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22media: dt-bindings: media: rcar_vin: Use status "okay"Geert Uytterhoeven
According to the Devicetree Specification, "ok" is not a valid status. Fixes: 47c71bd61b772cd7 ("[media] rcar_vin: add devicetree support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-22drm/ttm: Export the ttm_k[un]map_atomic_prot API.Thomas Hellstrom
It will be used by vmwgfx cpu blit. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Brian Paul <brianp@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/ttm: Clean up kmap_atomic_prot selection codeThomas Hellstrom
Use helpers to perform the kmap_atomic_prot() functionality to a) Avoid in-function ifdefs that violate the kernel coding policy, b) Facilitate exporting the functionality. This commit should not change any functionality. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/etnaviv: bump HW job limit to 4Lucas Stach
The current limit of 2 leads to some GPU idle times, as the usual IRQ latency leads to up to 3 jobs getting signaled at once with some standard workloads. A larger HW job limit might lead to slightly worse QoS, but we accept that to not sacrifice GPU throughput in the common case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2018-03-22drm/vmwgfx: Cursor update fixesThomas Hellstrom
Use drm_plane_helper_check_update also for the cursor plane. Some applications, like gdm on gnome shell still uses cursor front-buffer like rendering without notifying the kernel. We do need some kind of noficiation, but work around this for now by updating the cursor image on every cursor move. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com>
2018-03-22drm/vmwgfx: Send the correct nonblock option for atomic_commitDeepak Rawat
Page flip can be slow for vmwgfx in some cases, like need to do surface copy to different surface or waiting for IN_FENCE_FD. Enabling nonblocking commits for vmwgfx in case userspace request it. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move the stdu vblank event to atomic functionDeepak Rawat
Atomic ioctl can also send the same page flip flags as legacy ioctl. In those cases also need to send the vblank event to userspace. vmwgfx does not support flag DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move screen object page flip to atomic functionDeepak Rawat
The dmabuf_dirty/surface_dirty in case of screen object is moved to plane atomic update, so that page flip in atomic ioctl also works. vmwgfx does not support DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never expected. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flushDeepak Rawat
The function drm_crtc_arm_vblank_event should be used for the driver which have vblank interrupt support. In case of vmwgfx we do not have vblank interrupt. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Move surface copy cmd to atomic functionDeepak Rawat
When display surface is different than the framebuffer surface, atomic path do not copy the surface data. This commit moved the code to copy surface from legacy to atomic path. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22drm/vmwgfx: Avoid iterating over display unit if crtc is availableDeepak Rawat
In case of page flip there is no need to iterate over all display unit in the function "vmw_kms_helper_dirty". If crtc is available then dirty commands is performed on that crtc only. Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2018-03-22mmc: renesas_sdhi: replace EXT_ACC with HOST_MODEMasaharu Hayakawa
All our documentation says HOST_MODE, we don't really know where EXT_ACC came from. Rename it to reduce the confusion. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-03-22mmc: update sdio_claim_irq documentationJoel Cunningham
Update documentation for sdio_claim_irq to downgrade the wording about doing recursive claims in an IRQ handler from 'must not' to 'should not'. This clarifies that recursive claims are supported, but not the recommended (best) practice Signed-off-by: Joel Cunningham <joel.cunningham@garmin.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-03-22ALSA: aloop: Fix access to not-yet-ready substream via cableTakashi Iwai
In loopback_open() and loopback_close(), we assign and release the substream object to the corresponding cable in a racy way. It's neither locked nor done in the right position. The open callback assigns the substream before its preparation finishes, hence the other side of the cable may pick it up, which may lead to the invalid memory access. This patch addresses these: move the assignment to the end of the open callback, and wrap with cable->lock for avoiding concurrent accesses. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22mmc: Export host capabilities to debugfs.Abbas Raza
This patch exports the host capabilities to debugfs Signed-off-by: Abbas Raza <Abbas_Raza@mentor.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> [Harish: Added caps2, moved creation to mmc_add_host_debugfs] Signed-off-by: Harish Jenny K N <harish_kandiga@mentor.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-03-22ALSA: aloop: Sync stale timer before releaseTakashi Iwai
The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources. A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running. The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger). For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22ALSA: hda/realtek - Fix speaker no sound after system resumeKailang Yang
It will have a chance speaker no sound after system resume. To toggle NID 0x53 index 0x2 bit 15 will solve this issue. This usage will also suitable with ALC256. Fixes: 4a219ef8f370 ("ALSA: hda/realtek - Add ALC256 HP depop function") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22ALSA: hda/realtek - Fix Dell headset Mic can't recordKailang Yang
This platform was hardware fixed type for CTIA type for headset port. Assigned 0x19 verb will fix can't record issue. Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-03-22regulator: core: Add missing blank line between functionsMark Brown
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-22drm: udl: Properly check framebuffer mmap offsetsGreg Kroah-Hartman
The memmap options sent to the udl framebuffer driver were not being checked for all sets of possible crazy values. Fix this up by properly bounding the allowed values. Reported-by: Eyal Itkin <eyalit@checkpoint.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com
2018-03-22dmaengine: stm32-dmamux: fix a potential buffer overflowPierre-Yves MORDRET
The bitfield dma_inuse is allocated of size dma_requests bits, thus a valid bit address is from 0 to (dma_requests - 1). When find_first_zero_bit() fails, it returns dma_requests as invalid address. Using such address for the following set_bit() is incorrect and, if dma_requests is a multiple of BITS_PER_LONG, it will cause a buffer overflow. Currently this driver is only used in DT stm32h743.dtsi where a safe value dma_requests=16 is not triggering the buffer overflow. Fixed by checking the return value of find_first_zero_bit() _before_ using it. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-21Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"Alex Williamson
This reverts commit 2170dd04316e0754cbbfa4892a25aead39d225f7 The intent of commit 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") was to disallow the user from seeing that the device supports INTx if the platform is incapable of enabling it. The detection of this case however incorrectly includes devices which natively do not support INTx, such as SR-IOV VFs, and further discussions reveal gaps even for the target use case. Reported-by: Arjun Vynipadath <arjun@chelsio.com> Fixes: 2170dd04316e ("vfio-pci: Mask INTx if a device is not capabable of enabling it") Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-03-22regulator: qcom_smd: Drop regulator/{machine,of_regulator} includesStephen Boyd
These seem to be leftovers from previous developments of the driver but they never got removed. Dropping them still allows the code to compile so everything must be fine. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-22spi: sh-msiof: Use correct enum for DMA transfer directionGeert Uytterhoeven
Use enum dma_transfer_direction as required by dmaengine_prep_slave_sg() instead of enum dma_data_direction. This won't change behavior in practice as the enum values are equivalent. This fixes two warnings when building with clang: drivers/spi/spi-sh-msiof.c:755:27: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] rx->sgl, rx->nents, DMA_FROM_DEVICE, ^~~~~~~~~~~~~~~ drivers/spi/spi-sh-msiof.c:772:27: warning: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Wenum-conversion] tx->sgl, tx->nents, DMA_TO_DEVICE, ^~~~~~~~~~~~~ Based on commit 768d59f5d0139a6f ("spi: rspi: use correct enum for DMA transfer direction"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-22MIPS: ralink: Fix booting on MT7621NeilBrown
Since commit 3af5a67c86a3 ("MIPS: Fix early CM probing") the MT7621 has not been able to boot. This commit caused mips_cm_probe() to be called before mt7621.c::proc_soc_init(). prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out the bootloader config" and means that configuration registers are no longer available. It has some code to re-enable this config. Before this re-enable code is run, the sysc register cannot be read, so when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and panic() is called. If we move the config-repair code to the top of prom_soc_init(), the registers can be read and boot can proceed. Very occasionally, the first register read after the reconfiguration returns garbage, so add a call to __sync(). Fixes: 3af5a67c86a3 ("MIPS: Fix early CM probing") Signed-off-by: NeilBrown <neil@brown.name> Reviewed-by: Matt Redfearn <matt.redfearn@mips.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.5+ Patchwork: https://patchwork.linux-mips.org/patch/18859/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-21MIPS: ralink: Remove ralink_halt()NeilBrown
ralink_halt() does nothing that machine_halt() doesn't already do, so it adds no value. It actually causes incorrect behaviour due to the "unreachable()" at the end. This tells the compiler that the end of the function will never be reached, which isn't true. The compiler responds by not adding a 'return' instruction, so control simply moves on to whatever bytes come afterwards in memory. In my tested, that was the ralink_restart() function. This means that an attempt to 'halt' the machine would actually cause a reboot. So remove ralink_halt() so that a 'halt' really does halt. Fixes: c06e836ada59 ("MIPS: ralink: adds reset code") Signed-off-by: NeilBrown <neil@brown.name> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.9+ Patchwork: https://patchwork.linux-mips.org/patch/18851/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-03-22Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few more fixes for 4.16. Mostly for displays: - A fix for DP handling on radeon - Fix banding on eDP panels - Fix HBR audio - Fix for disabling VGA mode on Raven that leads to a corrupt or blank display on some platforms * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/amd/display: Add one to EDID's audio channel count when passing to DC drm/amd/display: We shouldn't set format_default on plane as atomic driver drm/amd/display: Fix FMT truncation programming drm/amd/display: Allow truncation to 10 bits drm/amd/display: fix dereferencing possible ERR_PTR() drm/amd/display: Refine disable VGA drm/amdgpu: Use atomic function to disable crtcs with dc enabled drm/radeon: Don't turn off DP sink when disconnected
generated by cgit (git 2.34.1) at 2025-09-21 21:52:02 +0000