summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-29ath10k: enable QCA6174/QCA9377 to read the chip temperatureRyan Hsu
The firmware of QCA6174/QCA9377 already support the feature, just enable it to be able to handle the get_temperature command and process the event. You can read the temperature by using the hwmon interface, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Verified with the following hardware and software combination, QCA6174, only firmware-4.bin doesn't support this, otherwise all support. QCA9377, all the firmwares upstreamed support this command Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29Revert "ath10k: send (re)assoc peer command when NSS changed"Karthikeyan Periyasamy
This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159. When Ath10k is in AP mode and an unassociated STA sends a VHT action frame (Operating Mode Notification for the NSS change) periodically to AP this causes ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during NSS update. Over the time (with a certain client it can happen within 15 mins when there are over 500 of these VHT action frames) continuous calls of WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust. To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS updates and no need to call ath10k_station_assoc(). So revert the original commit from 2014 as it's unclear why the change was really needed. Now the firmware assert doesn't happen anymore. Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053. This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and QCA988x platform with firmware version: 10.2.4-1.0-00036. Firmware Assert log: ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c) ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386 ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344 ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0002:01:00.0: firmware register dump: ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31 ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60 ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000 ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2 ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000 ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34 ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4 ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4 ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00 ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4 ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0002:01:00.0: Copy Engine register dump: ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx: ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3 ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213 ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21 ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25 ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104 ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156 ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12 ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1 ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather: ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0 ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0 ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0 ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1 ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0 ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1 ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0 ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0 ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0 ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0 ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0 ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0 ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0 ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0 ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0 ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0 ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0 ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1 ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0 ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0 ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0 ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0 ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29ath9k: fix DFS detector synchronizationTimothy Redaelli
some userspace programs (e.g. hostapd) need to set the regulatory domain before selecting the operating channel. Synchronize DFS detector regardless of the value of ah->curchan, to avoid situations where wireless scan can't be done on some 5GHz sub-bands, because dfs_region is constantly UNSET. Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-29nl80211: Add SOCKET_OWNER support to START_APDenis Kenzior
Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29nl80211: Add SOCKET_OWNER support to JOIN_MESHDenis Kenzior
Signed-off-by: Denis Kenzior <denkenz@gmail.com> [johannes: fix race with wdev lock/unlock by just acquiring once] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29nl80211: Add SOCKET_OWNER support to JOIN_IBSSDenis Kenzior
Signed-off-by: Denis Kenzior <denkenz@gmail.com> [johannes: fix race with wdev lock/unlock by just acquiring once] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29Merge tag 'iwlwifi-next-for-kalle-2018-03-28' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for 4.14 * Fix a UBSAN warning; * Improvement in the net-stack/driver log syncing * An RCU lock fix in the new rate-scaling code; * Support for new PCI IDs for the 9000 family; * Support for a new API version; * Initial work for supporting the new ETSI rules; * Support for advanced dwell in scanning; * Support for OCE in scanning; * Some debugging improvements; * Other small improvements and cleanups here and there.
2018-03-29cfg80211: Support all iftypes in autodisconnect_wkDenis Kenzior
Currently autodisconnect_wk assumes that only interface types of P2P_CLIENT and STATION use conn_owner_nlportid. Change this so all interface types are supported. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29cfg80211: enable use of non-cleared DFS channels for DFS offloadDmitry Lebed
Currently channel switch/start_ap to DFS channel cannot be done to non-CAC-cleared channel even if DFS offload if enabled. Make non-cleared DFS channels available if DFS offload is enabled. CAC will be started by HW after channel change, start_ap call, etc. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29cfg80211: fix CAC_STARTED event handlingDmitry Lebed
Exclude CAC_STARTED event from !wdev->cac_started check, since cac_started will be set later in the same function. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29mac80211: Use proper chan_width enum in sta opmode eventtamizhr@codeaurora.org
Bandwidth change value reported via nl80211 contains mac80211 specific enum value(ieee80211_sta_rx_bw) and which is not understand by userspace application. Map the mac80211 specific value to nl80211_chan_width enum value to avoid using wrong value in the userspace application. And used station's ht/vht capability to map IEEE80211_STA_RX_BW_20 and IEEE80211_STA_RX_BW_160 with proper nl80211 value. Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29mac80211: Use proper smps_mode enum in sta opmode eventtamizhr@codeaurora.org
SMPS_MODE change value notified via nl80211 contains mac80211 specific value(ieee80211_smps_mode) and user space application will not know those values. This patch add support to map the mac80211 enum value to nl80211_smps_mode which will be understood by the userspace application. Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29cfg80211: fix data type of sta_opmode_info parametertamizhr@codeaurora.org
Currently bw and smps_mode are u8 type value in sta_opmode_info structure. This values filled in mac80211 from ieee80211_sta_rx_bandwidth and ieee80211_smps_mode. These enum values are specific to mac80211 and userspace/cfg80211 doesn't know about that. This will lead to incorrect result/assumption by the user space application. Change bw and smps_mode parameters to their respective enums in nl80211. Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29Merge tag 'perf-core-for-mingo-4.17-20180328' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Be consistent when checking if a perf_mmap instance had its ring buffer unmmaped, fixing segfaults noticed in 'perf trace' (Kan Liang, Arnaldo Carvalho de Melo) - Avoid adding the same option multiple times to the 'diff' command in check-headers.sh (Jiri Olsa) - Add vendor event files (JSON format) to various IBM s390 models (z10EC, z10BC, z196, zEC12, zBC12, z13 and z14) (Thomas Richter) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-28Merge branch 'nfp-bpf-updates'Alexei Starovoitov
Jakub Kicinski says: ==================== This set adds support for update and delete calls from the datapath, as well as XADD instructions (32 and 64 bit) and pseudo random numbers. The XADD support depends on verifier enforcing alignment which Daniel recently added. XADD uses NFP's atomic engine which requires values to be in big endian, therefore we need to keep track of which parts of the values are used as atomics and byte swap them accordingly. Pseudo random numbers are generated using NFP's HW pseudo random number generator. Jiong tackles initial implementation of packet cache, which he describes as follows: Memory reads on NFP would first fetch data from memory to transfer-in registers, then move them from transfer-in to general registers. Given NFP is rich on transfer-in registers, they could serve as memory cache. This patch tries to identify a sequence of packet data read (BPF_LDX) that are executed sequentially, then the total access range of the sequence is calculated and attached to each read instruction, the first instruction in this sequence is marked with an cache init flag so the execution of it would bring in the whole range of packet data for the sequence. All later packet reads in this sequence would fetch data from transfer-in registers directly, no need to JIT NFP memory access. Function call, non-packet-data memory read, packet write and memcpy will invalidate the cache and start a new cache range. Cache invalidation could be improved in the future, for example packet write doesn't need to invalidate the cache if the the write destination won't be read again. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: improve wrong FW response warningsJakub Kicinski
When FW responds with a message of wrong size or type make sure the type is checked first and included in the wrong size message. This makes it easier to figure out which FW command failed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add support for bpf_get_prandom_u32()Jakub Kicinski
NFP has a prng register, which we can read to obtain a u32 worth of pseudo random data. Generate code for it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add support for atomic add of unknown valuesJakub Kicinski
Allow atomic add to be used even when the value is not guaranteed to fit into a 16 bit immediate. This requires the value to be pulled as data, and therefore use of a transfer register and a context swap. Track the information about possible lengths of the value, if it's guaranteed to be larger than 16bits don't generate the code for the optimized case at all. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: expose command delay slotsJakub Kicinski
Allow callers to control the delay slots of commands, instead of giving them just a wait/nowait choice. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add basic support for atomic addsJakub Kicinski
Implement atomic add operation for 32 and 64 bit values. Depend on the verifier to ensure alignment. Values have to be kept in big endian and swapped upon read/write. For now only support atomic add of a constant. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28bpf: add parenthesis around argument of BPF_LDST_BYTES()Jakub Kicinski
BPF_LDST_BYTES() does not put it's argument in parenthesis when referencing it. This makes it impossible to pass pointers obtained by address-of operator (e.g. BPF_LDST_BYTES(&insn)). Add the parenthesis. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add map deletes from the datapathJakub Kicinski
Support calling map_delete_elem() FW helper from the datapath programs. For JIT checks and code are basically equivalent to map lookups. Similarly to other map helper key must be on the stack. Different pointer types are left for future extension. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add map updates from the datapathJakub Kicinski
Support calling map_update_elem() from the datapath programs by calling into FW-provided helper. Value pointer is passed in LM pointer #2. Keeping track of old state for arg3 is not necessary, since LM pointer #2 will be always loaded in this case, the trivial optimization for value at the bottom of the stack can't be done here. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add helper for basic map call checksJakub Kicinski
Add a verifier helper for performing the basic state checks before a call to a map helper. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: add helper for validating stack pointersJakub Kicinski
Our implementation has restriction on stack pointers for function calls. Move the common checks into a helper for reuse. The state has to be encapsulated into a structure to support parameters other than BPF_REG_2. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: rename map_lookup_stack() to map_call_stack_common()Jakub Kicinski
We will reuse most of map call code gen for other map calls. Rename the lookup gen function and use meta->func_id instead of hard-coding lookup. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: detect packet reads could be cached, enable the optimisationJiong Wang
This patch is the front end of this optimisation, it detects and marks those packet reads that could be cached. Then the optimisation "backend" will be activated automatically. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: support unaligned read offsetJiong Wang
This patch add the support for unaligned read offset, i.e. the read offset to the start of packet cache area is not aligned to REG_WIDTH. In this case, the read area might across maximum three transfer-in registers. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28nfp: bpf: read from packet data cache for PTR_TO_PACKETJiong Wang
This patch assumes there is a packet data cache, and would try to read packet data from the cache instead of from memory. This patch only implements the optimisation "backend", it doesn't build the packet data cache, so this optimisation is not enabled. This patch has only enabled aligned packet data read, i.e. when the read offset to the start of cache is REG_WIDTH aligned. Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-28Merge tag 'drm-fixes-for-v4.16-rc8' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing serious, two amdkfd and two tegra fixes" * tag 'drm-fixes-for-v4.16-rc8' of git://people.freedesktop.org/~airlied/linux: drm/tegra: dc: Using NULL instead of plain integer drm/amdkfd: Deallocate SDMA queues correctly drm/amdkfd: Fix scratch memory with HWS enabled drm/tegra: dc: Use correct format array for Tegra124
2018-03-29netfilter: nf_nat_snmp_basic: add correct dependency to MakefileMasahiro Yamada
nf_nat_snmp_basic_main.c includes a generated header, but the necessary dependency is missing in Makefile. This could cause build error in parallel building. Remove a weird line, and add a correct one. Fixes: cc2d58634e0f ("netfilter: nf_nat_snmp_basic: use asn1 decoder library") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "8 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: demote ARM port to "odd fixes" MAINTAINERS: correct rmk's email address mm/kmemleak.c: wait for scan completion before disabling free mm/memcontrol.c: fix parameter description mismatch mm/vmstat.c: fix vmstat_update() preemption BUG mm/page_owner: fix recursion bug after changing skip entries ipc/shm.c: add split function to shm_vm_ops mm, slab: memcg_link the SLAB's kmem_cache
2018-03-29Merge tag 'drm/tegra/for-4.16-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.16 This contains two small fixes, one which fixes a typo that causes a crash with the new framebuffer modifier query support and another that fixes a build warning. * tag 'drm/tegra/for-4.16-fixes' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: dc: Using NULL instead of plain integer drm/tegra: dc: Use correct format array for Tegra124
2018-03-28Merge tag 'powerpc-4.16-6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 4.16. Apologies if this is a bit big at rc7, but they're all reasonably important fixes. None are actually for new code, so they aren't indicative of 4.16 being in bad shape from our point of view. - Fix missing AT_BASE_PLATFORM (in auxv) when we're using a new firmware interface for describing CPU features. - Fix lost pending interrupts due to a race in our interrupt soft-masking code. - A workaround for a nest MMU bug with TLB invalidations on Power9. - A workaround for broadcast TLB invalidations on Power9. - Fix a bug in our instruction SLB miss handler, when handling bad addresses (eg. >= TASK_SIZE), which could corrupt non-volatile user GPRs. Thanks to: Aneesh Kumar K.V, Balbir Singh, Benjamin Herrenschmidt, Nicholas Piggin" * tag 'powerpc-4.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix i-side SLB miss bad address handler saving nonvolatile GPRs powerpc/mm: Fixup tlbie vs store ordering issue on POWER9 powerpc/mm/radix: Move the functions that does the actual tlbie closer powerpc/mm/radix: Remove unused code powerpc/mm: Workaround Nest MMU bug with TLB invalidations powerpc/mm: Add tracking of the number of coprocessors using a context powerpc/64s: Fix lost pending interrupt due to race causing lost update to irq_happened powerpc/64s: Fix NULL AT_BASE_PLATFORM when using DT CPU features
2018-03-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are are a couple of last-minute fixes for 4.16, mostly for regressions. As usual, the majory are device tree changes: - USB 3 support on rk3399 didn't work and is being reverted for now - One fix for an old suspend/resume bug on rk3399 - A few regulator related fixes on Banana Pi M2, and on imx7d-sdb - A boot regression fix for all Aspeed SoCs failing to find their memory - One more dtc warning fix The other changes are: - A few updates to the MAINTAINERS file - A revert for an incorrect orion5x cleanup - Two power management fixes for OMAP" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: Fix SRAM W+X mapping ARM: dts: aspeed: Add default memory node mailmap: Update email address for Gregory CLEMENT ARM: davinci: fix the GPIO lookup for omapl138-hawk MAINTAINERS: Update Tegra IOMMU maintainer ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name ARM: ux500: Fix PMU IRQ regression ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288 Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399" arm64: dts: rockchip: Fix rk3399-gru-* s2r (pinctrl hogs, wifi reset) ARM: OMAP: Fix dmtimer init for omap1 MAINTAINERS: update email address for Maxime Ripard ARM: dts: sun6i: a31s: bpi-m2: add missing regulators ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties
2018-03-28MAINTAINERS: demote ARM port to "odd fixes"Russell King
As of the start of 2018, I am no longer paid to support the core 32-bit ARM architecture code. This means that this code is no longer commercially supported, and is now only supported through voluntary effort. I will continue to merge patches as and when able, but this will be at a lower priority than before (which means a longer latency.) I have also be scaled back the amount of time spent reading email, so email that is intended for my attention needs to make itself plainly obvious, or I will miss it. In an attempt to reduce the amount of email Cc'd to me, exclude arch/arm/boot/dts from the maintainers patterns, but add entries for the SolidRun platforms I look after. Link: http://lkml.kernel.org/r/E1ezkgn-0002fO-52@rmk-PC.armlinux.org.uk Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28MAINTAINERS: correct rmk's email addressRussell King
Correct my email address in the MAINTAINTERS file. Link: http://lkml.kernel.org/r/E1ezkgi-0002fH-01@rmk-PC.armlinux.org.uk Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm/kmemleak.c: wait for scan completion before disabling freeVinayak Menon
A crash is observed when kmemleak_scan accesses the object->pointer, likely due to the following race. TASK A TASK B TASK C kmemleak_write (with "scan" and NOT "scan=on") kmemleak_scan() create_object kmem_cache_alloc fails kmemleak_disable kmemleak_do_cleanup kmemleak_free_enabled = 0 kfree kmemleak_free bails out (kmemleak_free_enabled is 0) slub frees object->pointer update_checksum crash - object->pointer freed (DEBUG_PAGEALLOC) kmemleak_do_cleanup waits for the scan thread to complete, but not for direct call to kmemleak_scan via kmemleak_write. So add a wait for kmemleak_scan completion before disabling kmemleak_free, and while at it fix the comment on stop_scan_thread. [vinmenon@codeaurora.org: fix stop_scan_thread comment] Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.org Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm/memcontrol.c: fix parameter description mismatchHonglei Wang
There are a couple of places where parameter description and function name do not match the actual code. Fix it. Link: http://lkml.kernel.org/r/1520843448-17347-1-git-send-email-honglei.wang@oracle.com Signed-off-by: Honglei Wang <honglei.wang@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm/vmstat.c: fix vmstat_update() preemption BUGSteven J. Hill
Attempting to hotplug CPUs with CONFIG_VM_EVENT_COUNTERS enabled can cause vmstat_update() to report a BUG due to preemption not being disabled around smp_processor_id(). Discovered on Ubiquiti EdgeRouter Pro with Cavium Octeon II processor. BUG: using smp_processor_id() in preemptible [00000000] code: kworker/1:1/269 caller is vmstat_update+0x50/0xa0 CPU: 0 PID: 269 Comm: kworker/1:1 Not tainted 4.16.0-rc4-Cavium-Octeon-00009-gf83bbd5-dirty #1 Workqueue: mm_percpu_wq vmstat_update Call Trace: show_stack+0x94/0x128 dump_stack+0xa4/0xe0 check_preemption_disabled+0x118/0x120 vmstat_update+0x50/0xa0 process_one_work+0x144/0x348 worker_thread+0x150/0x4b8 kthread+0x110/0x140 ret_from_kernel_thread+0x14/0x1c Link: http://lkml.kernel.org/r/1520881552-25659-1-git-send-email-steven.hill@cavium.com Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm/page_owner: fix recursion bug after changing skip entriesManinder Singh
This patch fixes commit 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries"). Because if we skip first two entries then logic of checking count value as 2 for recursion is broken and code will go in one depth recursion. so we need to check only one call of _RET_IP(__set_page_owner) while checking for recursion. Current Backtrace while checking for recursion:- (save_stack) from (__set_page_owner) // (But recursion returns true here) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) // recursion should return true here (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Correct Backtrace with fix: (save_stack) from (__set_page_owner) // recursion returned true here (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Link: http://lkml.kernel.org/r/1521607043-34670-1-git-send-email-maninder1.s@samsung.com Fixes: 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries") Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@techadventures.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ayush Mittal <ayush.m@samsung.com> Cc: Prakash Gupta <guptap@codeaurora.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Vasyl Gomonovych <gomonovych@gmail.com> Cc: Amit Sahrawat <a.sahrawat@samsung.com> Cc: <pankaj.m@samsung.com> Cc: Vaneet Narang <v.narang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28ipc/shm.c: add split function to shm_vm_opsMike Kravetz
If System V shmget/shmat operations are used to create a hugetlbfs backed mapping, it is possible to munmap part of the mapping and split the underlying vma such that it is not huge page aligned. This will untimately result in the following BUG: kernel BUG at /build/linux-jWa1Fv/linux-4.15.0/mm/hugetlb.c:3310! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: kcm nfc af_alg caif_socket caif phonet fcrypt CPU: 18 PID: 43243 Comm: trinity-subchil Tainted: G C E 4.15.0-10-generic #11-Ubuntu NIP: c00000000036e764 LR: c00000000036ee48 CTR: 0000000000000009 REGS: c000003fbcdcf810 TRAP: 0700 Tainted: G C E (4.15.0-10-generic) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24002222 XER: 20040000 CFAR: c00000000036ee44 SOFTE: 1 NIP __unmap_hugepage_range+0xa4/0x760 LR __unmap_hugepage_range_final+0x28/0x50 Call Trace: 0x7115e4e00000 (unreliable) __unmap_hugepage_range_final+0x28/0x50 unmap_single_vma+0x11c/0x190 unmap_vmas+0x94/0x140 exit_mmap+0x9c/0x1d0 mmput+0xa8/0x1d0 do_exit+0x360/0xc80 do_group_exit+0x60/0x100 SyS_exit_group+0x24/0x30 system_call+0x58/0x6c ---[ end trace ee88f958a1c62605 ]--- This bug was introduced by commit 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct"). A split function was added to vm_operations_struct to determine if a mapping can be split. This was mostly for device-dax and hugetlbfs mappings which have specific alignment constraints. Mappings initiated via shmget/shmat have their original vm_ops overwritten with shm_vm_ops. shm_vm_ops functions will call back to the original vm_ops if needed. Add such a split function to shm_vm_ops. Link: http://lkml.kernel.org/r/20180321161314.7711-1-mike.kravetz@oracle.com Fixes: 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm, slab: memcg_link the SLAB's kmem_cacheShakeel Butt
All the root caches are linked into slab_root_caches which was introduced by the commit 510ded33e075 ("slab: implement slab_root_caches list") but it missed to add the SLAB's kmem_cache. While experimenting with opt-in/opt-out kmem accounting, I noticed system crashes due to NULL dereference inside cache_from_memcg_idx() while deferencing kmem_cache.memcg_params.memcg_caches. The upstream clean kernel will not see these crashes but SLAB should be consistent with SLUB which does linked its boot caches (kmem_cache_node and kmem_cache) into slab_root_caches. Link: http://lkml.kernel.org/r/20180319210020.60289-1-shakeelb@google.com Fixes: 510ded33e075c ("slab: implement slab_root_caches list") Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-29Merge branch 'drm-misc-next-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next - Mask mode type garbage from userspace (Ville) Something went wrong on the misc tree side, but I'll pull the patch directly. * 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc: drm: Fix uabi regression by allowing garbage mode->type from userspace
2018-03-28RDMA/ucma: Introduce safer rdma_addr_size() variantsRoland Dreier
There are several places in the ucma ABI where userspace can pass in a sockaddr but set the address family to AF_IB. When that happens, rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6, and the ucma kernel code might end up copying past the end of a buffer not sized for a struct sockaddr_ib. Fix this by introducing new variants int rdma_addr_size_in6(struct sockaddr_in6 *addr); int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); that are type-safe for the types used in the ucma ABI and return 0 if the size computed is bigger than the size of the type passed in. We can use these new variants to check what size userspace has passed in before copying any addresses. Reported-by: <syzbot+6800425d54ed3ed8135d@syzkaller.appspotmail.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-28ipc/shm: Fix pid freeing.Eric W. Biederman
The 0day kernel test build report reported an oops: > > IP: put_pid+0x22/0x5c > PGD 19efa067 P4D 19efa067 PUD 0 > Oops: 0000 [#1] > CPU: 0 PID: 727 Comm: trinity Not tainted 4.16.0-rc2-00010-g98f929b #1 > RIP: 0010:put_pid+0x22/0x5c > RSP: 0018:ffff986719f73e48 EFLAGS: 00010202 > RAX: 00000006d765f710 RBX: ffff98671a4fa4d0 RCX: ffff986719f73d40 > RDX: 000000006f6e6125 RSI: 0000000000000000 RDI: ffffffffa01e6d21 > RBP: ffffffffa0955fe0 R08: 0000000000000020 R09: 0000000000000000 > R10: 0000000000000078 R11: ffff986719f73e76 R12: 0000000000001000 > R13: 00000000ffffffea R14: 0000000054000fb0 R15: 0000000000000000 > FS: 00000000028c2880(0000) GS:ffffffffa06ad000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 0000000677846439 CR3: 0000000019fc1005 CR4: 00000000000606b0 > Call Trace: > ? ipc_update_pid+0x36/0x3e > ? newseg+0x34c/0x3a6 > ? ipcget+0x5d/0x528 > ? entry_SYSCALL_64_after_hwframe+0x52/0xb7 > ? SyS_shmget+0x5a/0x84 > ? do_syscall_64+0x194/0x1b3 > ? entry_SYSCALL_64_after_hwframe+0x42/0xb7 > Code: ff 05 e7 20 9b 03 58 c9 c3 48 ff 05 85 21 9b 03 48 85 ff 74 4f 8b 47 04 8b 17 48 ff 05 7c 21 9b 03 48 83 c0 03 48 c1 e0 04 ff ca <48> 8b 44 07 08 74 1f 48 ff 05 6c 21 9b 03 ff 0f 0f 94 c2 48 ff > RIP: put_pid+0x22/0x5c RSP: ffff986719f73e48 > CR2: 0000000677846439 > ---[ end trace ab8c5cb4389d37c5 ]--- > Kernel panic - not syncing: Fatal exception In newseg when changing shm_cprid and shm_lprid from pid_t to struct pid* I misread the kvmalloc as kvzalloc and thought shp was initialized to 0. As that is not the case it is not safe to for the error handling to address shm_cprid and shm_lprid before they are initialized. Therefore move the cleanup of shm_cprid and shm_lprid from the no_file error cleanup path to the no_id error cleanup path. Ensuring that an early error exit won't cause the oops above. Reported-by: kernel test robot <fengguang.wu@intel.com> Reviewed-by: Nagarathnam Muthusamy <nagarathnam.muthusamy@oracle.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-03-28locking/rtmutex: Handle non enqueued waiters gracefully in remove_waiter()Peter Zijlstra
In -RT task_blocks_on_rt_mutex() may return with -EAGAIN due to (->pi_blocked_on == PI_WAKEUP_INPROGRESS) before it added itself as a waiter. In such a case remove_waiter() must not be called because without a waiter it will trigger the BUG_ON() statement. This was initially reported by Yimin Deng. Thomas Gleixner fixed it then with an explicit check for waiters before calling remove_waiter(). Instead of an explicit NULL check before calling rt_mutex_top_waiter() make the function return NULL if there are no waiters. With that fixed the now pointless NULL check is removed from rt_mutex_slowlock(). Reported-and-debugged-by: Yimin Deng <yimin11.deng@gmail.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/CAAh1qt=DCL9aUXNxanP5BKtiPp3m+qj4yB+gDohhXPVFCxWwzg@mail.gmail.com Link: https://lkml.kernel.org/r/20180327121438.sss7hxg3crqy4ecd@linutronix.de
2018-03-28Merge branch 'bpf-raw-tracepoints'Daniel Borkmann
Alexei Starovoitov says: ==================== v7->v8: - moved 'u32 num_args' from 'struct tracepoint' into 'struct bpf_raw_event_map' that increases memory overhead, but can be optimized/compressed later. Now it's zero changes in tracepoint.[ch] v6->v7: - adopted Steven's bpf_raw_tp_map section approach to find tracepoint and corresponding bpf probe function instead of kallsyms approach. dropped kernel_tracepoint_find_by_name() patch v5->v6: - avoid changing semantics of for_each_kernel_tracepoint() function, instead introduce kernel_tracepoint_find_by_name() helper v4->v5: - adopted Daniel's fancy REPEAT macro in bpf_trace.c in patch 6 v3->v4: - adopted Linus's CAST_TO_U64 macro to cast any integer, pointer, or small struct to u64. That nicely reduced the size of patch 1 v2->v3: - with Linus's suggestion introduced generic COUNT_ARGS and CONCATENATE macros (or rather moved them from apparmor) that cleaned up patch 6 - added patch 4 to refactor trace_iwlwifi_dev_ucode_error() from 17 args to 4 Now any tracepoint with >12 args will have build error v1->v2: - simplified api by combing bpf_raw_tp_open(name) + bpf_attach(prog_fd) into bpf_raw_tp_open(name, prog_fd) as suggested by Daniel. That simplifies bpf_detach as well which is now simple close() of fd. - fixed memory leak in error path which was spotted by Daniel. - fixed bpf_get_stackid(), bpf_perf_event_output() called from raw tracepoints - added more tests - fixed allyesconfig build caught by buildbot v1: This patch set is a different way to address the pressing need to access task_struct pointers in sched tracepoints from bpf programs. The first approach simply added these pointers to sched tracepoints: https://lkml.org/lkml/2017/12/14/753 which Peter nacked. Few options were discussed and eventually the discussion converged on doing bpf specific tracepoint_probe_register() probe functions. Details here: https://lkml.org/lkml/2017/12/20/929 Patch 1 is kernel wide cleanup of pass-struct-by-value into pass-struct-by-reference into tracepoints. Patches 2 and 3 are minor cleanups to address allyesconfig build Patch 4 refactor trace_iwlwifi_dev_ucode_error from 17 to 4 args Patch 5 introduces COUNT_ARGS macro Patch 6 introduces BPF_RAW_TRACEPOINT api. the auto-cleanup and multiple concurrent users are must have features of tracing api. For bpf raw tracepoints it looks like: // load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type prog_fd = bpf_prog_load(...); // receive anon_inode fd for given bpf_raw_tracepoint // and attach bpf program to it raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd); Ctrl-C of tracing daemon or cmdline tool will automatically detach bpf program, unload it and unregister tracepoint probe. More details in patch 6. Patch 7 - trivial support in libbpf Patches 8, 9 - user space tests samples/bpf/test_overhead performance on 1 cpu: tracepoint base kprobe+bpf tracepoint+bpf raw_tracepoint+bpf task_rename 1.1M 769K 947K 1.0M urandom_read 789K 697K 750K 755K ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28selftests/bpf: test for bpf_get_stackid() from raw tracepointsAlexei Starovoitov
similar to traditional traceopint test add bpf_get_stackid() test from raw tracepoints and reduce verbosity of existing stackmap test Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-28samples/bpf: raw tracepoint testAlexei Starovoitov
add empty raw_tracepoint bpf program to test overhead similar to kprobe and traditional tracepoint tests Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit (git 2.34.1) at 2025-09-15 04:50:34 +0000