summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-09ASoC: codecs/jz4770: Add DAPM widget to set HP out to cap-less modePaul Cercueil
Cap-less mode is useful e.g. if the headphones are used as an antenna for a FM radio, so that the signal is not altered. For everything else, we want the cap-couple mode. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz4770: Don't change cap-couple setting in HP PMU/PMDPaul Cercueil
There is simply no reason to do that. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-4-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz4770: Adjust timeouts for cap-coupled outputsChristophe Branchereau
When using cap-coupled outputs, the RUP/RDO can take much longer than the 100ms timeout we used to have. Increase that timeout to one second. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz4770: Reset interrupt flags in bias PREPAREChristophe Branchereau
In case a poll for RUP times out, we might be left with some IRQ flags that should be cleared before the next power on. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: codecs/jz47xx: Use regmap_{set,clear}_bitsPaul Cercueil
Use regmap_{set,clear}_bits instead of regmap_update_bits, when applicable. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201207125338.119397-1-paul@crapouillou.net Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: soc-pcm: care trigger rollbackKuninori Morimoto
soc_pcm_trigger() calls DAI/Component/Link trigger, but some of them might be failed. static int soc_pcm_trigger(...) { ... switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ret = snd_soc_link_trigger(substream, cmd); if (ret < 0) break; (*) ret = snd_soc_pcm_component_trigger(substream, cmd); if (ret < 0) break; ret = snd_soc_pcm_dai_trigger(substream, cmd); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ret = snd_soc_pcm_dai_trigger(substream, cmd); if (ret < 0) break; ret = snd_soc_pcm_component_trigger(substream, cmd); if (ret < 0) break; ret = snd_soc_link_trigger(substream, cmd); break; } ... } For example, if soc_pcm_trigger() failed at (*) point, we need to rollback previous succeeded trigger. This patch adds trigger mark for DAI/Component/Link, and do STOP if START/RESUME/PAUSE_RELEASE were failed. Because it need to use new rollback parameter, we need to modify DAI/Component/Link trigger functions in the same time. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: soc-pcm: remove dpcm_do_trigger()Kuninori Morimoto
dpcm_be_dai_trigger() is calling dpcm_do_trigger() at each SNDRV_PCM_TRIGGER_xxx (1). int dpcm_be_dai_trigger(...) { for_each_dpcm_be(fe, stream, dpcm) { (B) ... switch (cmd) { case SNDRV_PCM_TRIGGER_START: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_RESUME: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_STOP: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_SUSPEND: ... (1) ret = dpcm_do_trigger(...); ... case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ... (1) ret = dpcm_do_trigger(...); ... } } } But it is just very verbose and duplicated function. Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B). And dev_err() (C) is not needed because soc_pcm_trigger() itself indicates error message when error. static int dpcm_do_trigger(...) { int ret; (A) dev_dbg(...); ret = soc_pcm_trigger(substream, cmd); if (ret < 0) (C) dev_err(...); return ret; } This patch replace dpcm_do_trigger() to soc_pcm_trigger(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: AMD Raven/Renoir - fix the PCI probe (PCI revision)Jaroslav Kysela
The Raven and Renoir ACP can be distinguished by the PCI revision. Let's do the check very early, otherwise the wrong probe code can be run. Link: https://lore.kernel.org/alsa-devel/2e4587f8-f602-cf23-4845-fd27a32b1cfc@amd.com/ Cc: <stable@kernel.org> Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20201208181233.2745726-1-perex@perex.cz Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: max98390: Fix error codes in max98390_dsm_init()Dan Carpenter
These error paths return success but they should return -EINVAL. Fixes: 97ed3e509ee6 ("ASoC: max98390: Fix potential crash during param fw loading") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09ASoC: Intel: bytcr_rt5640: Add quirk for ARCHOS Cesium 140Chris Chiu
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing, thus the heaset functions are not working. Add quirk for this model to select the correct input map, jack-detect options and channel map to enable jack sensing and headset microphone. This device uses IN1 for its internal MIC and JD2 for jack-detect. Signed-off-by: Chris Chiu <chiu@endlessos.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-09dma-iommu: remove __iommu_dma_mmapChristoph Hellwig
The function has a single caller, so open code it there and take advantage of the precalculated page count variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20201209112019.2625029-1-hch@lst.de Signed-off-by: Will Deacon <will@kernel.org>
2020-12-09printk: remove logbuf_lock writer-protection of ringbufferJohn Ogness
Since the ringbuffer is lockless, there is no need for it to be protected by @logbuf_lock. Remove @logbuf_lock writer-protection of the ringbuffer. The reader-protection is not removed because some variables, used by readers, are using @logbuf_lock for synchronization: @syslog_seq, @syslog_time, @syslog_partial, @console_seq, struct kmsg_dumper. For PRINTK_NMI_DIRECT_CONTEXT_MASK, @logbuf_lock usage is not removed because it may be used for dumper synchronization. Without @logbuf_lock synchronization of vprintk_store() it is no longer possible to use the single static buffer for temporarily sprint'ing the message. Instead, use vsnprintf() to determine the length and perform the real vscnprintf() using the area reserved from the ringbuffer. This leads to suboptimal packing of the message data, but will result in less wasted storage than multiple per-cpu buffers to support lockless temporary sprint'ing. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201209004453.17720-3-john.ogness@linutronix.de
2020-12-09printk: inline log_output(),log_store() in vprintk_store()John Ogness
In preparation for removing logbuf_lock, inline log_output() and log_store() into vprintk_store(). This will simplify dealing with the various code branches and fallbacks that are possible. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201209004453.17720-2-john.ogness@linutronix.de
2020-12-09netfilter: nft_ct: Remove confirmation check for NFT_CT_IDBrett Mastbergen
Since commit 656c8e9cc1ba ("netfilter: conntrack: Use consistent ct id hash calculation") the ct id will not change from initialization to confirmation. Removing the confirmation check allows for things like adding an element to a 'typeof ct id' set in prerouting upon reception of the first packet of a new connection, and then being able to reference that set consistently both before and after the connection is confirmed. Fixes: 656c8e9cc1ba ("netfilter: conntrack: Use consistent ct id hash calculation") Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-12-09xen: don't use page->lru for ZONE_DEVICE memoryJuergen Gross
Commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") introduced usage of ZONE_DEVICE memory for foreign memory mappings. Unfortunately this collides with using page->lru for Xen backend private page caches. Fix that by using page->zone_device_data instead. Cc: <stable@vger.kernel.org> # 5.9 Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Reviewed-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-09xen: add helpers for caching grant mapping pagesJuergen Gross
Instead of having similar helpers in multiple backend drivers use common helpers for caching pages allocated via gnttab_alloc_pages(). Make use of those helpers in blkback and scsiback. Cc: <stable@vger.kernel.org> # 5.9 Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovksy@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-12-09gpio: eic-sprd: break loop when getting NULL device resourceChunyan Zhang
EIC controller have unfixed numbers of banks on different Spreadtrum SoCs, and each bank has its own base address, the loop of getting there base address in driver should break if the resource gotten via platform_get_resource() is NULL already. The later ones would be all NULL even if the loop continues. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201209055106.840100-1-zhang.lyra@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-09membarrier: Execute SYNC_CORE on the calling threadAndy Lutomirski
membarrier()'s MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE is documented as syncing the core on all sibling threads but not necessarily the calling thread. This behavior is fundamentally buggy and cannot be used safely. Suppose a user program has two threads. Thread A is on CPU 0 and thread B is on CPU 1. Thread A modifies some text and calls membarrier(MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE). Then thread B executes the modified code. If, at any point after membarrier() decides which CPUs to target, thread A could be preempted and replaced by thread B on CPU 0. This could even happen on exit from the membarrier() syscall. If this happens, thread B will end up running on CPU 0 without having synced. In principle, this could be fixed by arranging for the scheduler to issue sync_core_before_usermode() whenever switching between two threads in the same mm if there is any possibility of a concurrent membarrier() call, but this would have considerable overhead. Instead, make membarrier() sync the calling CPU as well. As an optimization, this avoids an extra smp_mb() in the default barrier-only mode and an extra rseq preempt on the caller. Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/r/250ded637696d490c69bef1877148db86066881c.1607058304.git.luto@kernel.org
2020-12-09membarrier: Explicitly sync remote cores when SYNC_CORE is requestedAndy Lutomirski
membarrier() does not explicitly sync_core() remote CPUs; instead, it relies on the assumption that an IPI will result in a core sync. On x86, this may be true in practice, but it's not architecturally reliable. In particular, the SDM and APM do not appear to guarantee that interrupt delivery is serializing. While IRET does serialize, IPI return can schedule, thereby switching to another task in the same mm that was sleeping in a syscall. The new task could then SYSRET back to usermode without ever executing IRET. Make this more robust by explicitly calling sync_core_before_usermode() on remote cores. (This also helps people who search the kernel tree for instances of sync_core() and sync_core_before_usermode() -- one might be surprised that the core membarrier code doesn't currently show up in a such a search.) Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/776b448d5f7bd6b12690707f5ed67bcda7f1d427.1607058304.git.luto@kernel.org
2020-12-09membarrier: Add an actual barrier before rseq_preempt()Andy Lutomirski
It seems that most RSEQ membarrier users will expect any stores done before the membarrier() syscall to be visible to the target task(s). While this is extremely likely to be true in practice, nothing actually guarantees it by a strict reading of the x86 manuals. Rather than providing this guarantee by accident and potentially causing a problem down the road, just add an explicit barrier. Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/d3e7197e034fa4852afcf370ca49c30496e58e40.1607058304.git.luto@kernel.org
2020-12-09x86/membarrier: Get rid of a dubious optimizationAndy Lutomirski
sync_core_before_usermode() had an incorrect optimization. If the kernel returns from an interrupt, it can get to usermode without IRET. It just has to schedule to a different task in the same mm and do SYSRET. Fortunately, there were no callers of sync_core_before_usermode() that could have had in_irq() or in_nmi() equal to true, because it's only ever called from the scheduler. While at it, clarify a related comment. Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5afc7632be1422f91eaf7611aaaa1b5b8580a086.1607058304.git.luto@kernel.org
2020-12-09ALSA: hda/realtek - Enable headset mic of ASUS Q524UQK with ALC255Chris Chiu
The ASUS laptop Q524UQK with ALC255 codec can't detect the headset microphone until ALC255_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied. Signed-off-by: Chris Chiu <chiu@endlessos.org> Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201209045730.9972-1-chiu@endlessos.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-09pinctrl: intel: Actually disable Tx and Rx buffers on GPIO requestAndy Shevchenko
Mistakenly the buffers (input and output) become enabled together for a short period of time during GPIO request. This is problematic, because instead of initial motive to disable them in the commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO"), the driven value on the pin, which might be used as an IRQ line, brings firmwares of some touch pads to an awkward state that needs a full power off to recover. Fix this, as stated in the culprit commit, by disabling the buffers. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210497 Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20201208182403.40435-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-09rtlwifi: rtl8192de: fix ofdm power compensationPing-Ke Shih
ofdm_index[] is used to indicate how many power compensation is needed to current thermal value. For internal PA module or 2.4G band, the min_index is different from other cases. This issue originally is reported by Dan. He found the size of ofdm_index[] is 2, but access index 'i' may be equal to 2 if 'rf' is 2 in case of 'is2t'. In fact, the chunk of code is added to wrong place, so move it back to proper place, and then power compensation and buffer overflow are fixed. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201207031903.7599-1-pkshih@realtek.com
2020-12-09ath9k_htc: adhere to the DONT_REORDER transmit flagMathy Vanhoef
Assure that frames with the fixed order flag are not reordered relative to each other. This is accomplished by transmitting them using a fixed priority independent of their QoS field. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201104061823.197407-6-Mathy.Vanhoef@kuleuven.be
2020-12-09ath11k: mesh: add support for 256 bitmap in blockack frames in 11axPradeep Kumar Chitrapu
Currently 256 bitmap in blockack frames is being set only for AP mode. Fix this to set whenever beacon has changed and has HE capability, there by supporting mesh as well. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-5-pradeepc@codeaurora.org
2020-12-09ath11k: support TXOP duration based RTS thresholdPradeep Kumar Chitrapu
HE operation IE in beacons is constructed based on userspace params, which firmware might not be aware of. This causes firmware not to configure TXOP duration based RTS threshold which could cause mismatch in behaviour with respect to what is being advertised in beacons. This patch sends HE operation IE fetched from beacon to firmware using WMI interface for configuration. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-4-pradeepc@codeaurora.org
2020-12-09ath11k: fix incorrect wmi param for configuring HE operationPradeep Kumar Chitrapu
WMI_VDEV_PARAM_TX_OFDMA_CPLEN has been added with incorrect enum value. Fix the enum to represent WMI param for configuring HE operation field. This is applicable to firmwares under https://github.com/kvalo/ath11k-firmware/tree/master/IPQ8074/hw2.0 https://github.com/kvalo/ath11k-firmware/tree/master/IPQ6018/hw1.0 https://github.com/kvalo/ath11k-firmware/tree/master/QCN9074/hw1.0 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020183111.25458-3-pradeepc@codeaurora.org
2020-12-09ath11k: unlock on error path in ath11k_mac_op_add_interface()Dan Carpenter
These error paths need to drop the &ar->conf_mutex before returning. Fixes: 690ace20ff79 ("ath11k: peer delete synchronization with firmware") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/X85sVGVP/0XvlrEJ@mwanda
2020-12-09wcn36xx: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f932c887e013767cbdabfdddd671086e8ae63193.1605896060.git.gustavoars@kernel.org
2020-12-09carl9170: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/04257418814755f081fa0ac14a61b01328cdc4ed.1605896059.git.gustavoars@kernel.org
2020-12-09ath5k: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/e127232621c4de340509047a11d98093958303c5.1605896059.git.gustavoars@kernel.org
2020-12-09ath11k: fix rmmod failure if qmi sequence failsAnilkumar Kolli
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working. Logs: Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper qmi failed to load CAL: IPQ8074/caldata.bin qmi failed to load board data file:-11 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01699-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606916215-24643-1-git-send-email-akolli@codeaurora.org
2020-12-09Merge branch 'opp/empty' into opp/linux-nextViresh Kumar
2020-12-09opp: of: Allow empty opp-table with opp-sharedNicola Mazzucato
The opp binding now allows to have an empty opp table and shared-opp to still describe that devices share v/f lines. When initialising an empty opp table, allow such case by: - treating such conditions with warnings in place of errors - don't fail on empty table Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09dt-bindings: opp: Allow empty OPP tablesNicola Mazzucato
Currently the optional property opp-shared is used within an opp table to tell that a set of devices share their clock/voltage lines (and the OPP points). It is therefore possible to use an empty OPP table to convey only that information, useful in situations where the opp points are provided via other means (hardware. firmware, etc). Update the documentation to remark this additional case and provide an example. Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09media: venus: dev_pm_opp_put_*() accepts NULL argumentViresh Kumar
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra check. Drop them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09drm/panfrost: dev_pm_opp_put_*() accepts NULL argumentViresh Kumar
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra check. Drop them. Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09drm/lima: dev_pm_opp_put_*() accepts NULL argumentViresh Kumar
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra check. Drop them. Reviewed-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argumentViresh Kumar
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra check. Drop them. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argumentViresh Kumar
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra checks. Drop them. Reviewed-by: Ilia Lin <ilia.lin@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argumentViresh Kumar
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so there is no need for us to carry the extra checks. Drop them. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_tableViresh Kumar
This allows the callers to drop the unnecessary checks. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09opp: Don't create an OPP table from dev_pm_opp_get_opp_table()Viresh Kumar
It has been found that some users (like cpufreq-dt and others on LKML) have abused the helper dev_pm_opp_get_opp_table() to create the OPP table instead of just finding it, which is the wrong thing to do. This routine was meant for OPP core's internal working and exposed the whole functionality by mistake. Change the scope of dev_pm_opp_get_opp_table() to only finding the table. The internal helpers _opp_get_opp_table*() are thus renamed to _add_opp_table*(), dev_pm_opp_get_opp_table_indexed() is removed (as we don't need the index field for finding the OPP table) and so the only user, genpd, is updated. Note that the prototype of _add_opp_table() was already left in opp.h by mistake when it was removed earlier and so we weren't required to add it now. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP tableViresh Kumar
Initially, the helper dev_pm_opp_get_opp_table() was supposed to be used only for the OPP core's internal use (it tries to find an existing OPP table and if it doesn't find one, then it allocates the OPP table). Sometime back, the cpufreq-dt driver started using it to make sure all the relevant resources required by the OPP core are available earlier during initialization process to properly propagate -EPROBE_DEFER. It worked but it also abused the API to create an OPP table, which should be created with the help of other helpers provided by the OPP core. The OPP core will be updated in a later commit to limit the scope of dev_pm_opp_get_opp_table() to only finding an existing OPP table and not create one. This commit updates the cpufreq-dt driver before that happens. Now the cpufreq-dt driver creates the OPP and cpufreq tables for all the CPUs from driver's init callback itself. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-09opp: Reduce the size of critical section in _opp_kref_release()Viresh Kumar
There is a lot of stuff here which can be done outside of the opp_table->lock, do that. This helps avoiding a circular dependency lockdeps around debugfs. Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-08mm/madvise: remove racy mm ownership checkMinchan Kim
Jann spotted the security hole due to race of mm ownership check. If the task is sharing the mm_struct but goes through execve() before mm_access(), it could skip process_madvise_behavior_valid check. That makes *any advice hint* to reach into the remote process. This patch removes the mm ownership check. With it, it will lose the ability that local process could give *any* advice hint with vector interface for some reason (e.g., performance). Since there is no concrete example in upstream yet, it would be better to remove the abiliity at this moment and need to review when such new advice comes up. Fixes: ecb8ac8b1f14 ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API") Reported-by: Jann Horn <jannh@google.com> Suggested-by: Jann Horn <jannh@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-08drm/amdgpu/powerplay: parse fan table for CI asicsAlex Deucher
Set up all the parameters required for SMU fan control if supported. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=201539 Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-08drm/amdgpu: fix size calculation with stolen vga memoryAlex Deucher
If we need to keep the stolen vga memory, make sure it is at least as big as the legacy vga size. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_initAlex Deucher
No longer used. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-23 10:14:44 +0000