summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-11spi: Limit the spi device max speed to controller's max speedTudor Ambarus
Make sure the max_speed_hz of spi_device does not override the max_speed_hz of controller. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20201209173514.93328-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-11ASoC: wm_adsp: remove "ctl" from list on error in wm_adsp_create_control()Dan Carpenter
The error handling frees "ctl" but it's still on the "dsp->ctl_list" list so that could result in a use after free. Remove it from the list before returning. Fixes: 2323736dca72 ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-11thermal/core: Add critical and hot opsDaniel Lezcano
Currently there is no way to the sensors to directly call an ops in interrupt mode without calling thermal_zone_device_update assuming all the trip points are defined. A sensor may want to do something special if a trip point is hot or critical. This patch adds the critical and hot ops to the thermal zone device, so a sensor can directly invoke them or let the thermal framework to call the sensor specific ones. Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20201210121514.25760-2-daniel.lezcano@linaro.org
2020-12-11thermal/core: Emit a warning if the thermal zone is updated without opsDaniel Lezcano
The actual code is silently ignoring a thermal zone update when a driver is requesting it without a get_temp ops set. That looks not correct, as the caller should not have called this function if the thermal zone is unable to read the temperature. That makes the code less robust as the check won't detect the driver is inconsistently using the thermal API and that does not help to improve the framework as these circumvolutions hide the problem at the source. In order to detect the situation when it happens, let's add a warning when the update is requested without the get_temp() ops set. Any warning emitted will have to be fixed at the source of the problem: the caller must not call thermal_zone_device_update if there is not get_temp callback set. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Amit Kucheria <amitk@kernel.org> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20201210121514.25760-1-daniel.lezcano@linaro.org
2020-12-11drm/panfrost: Register devfreq cooling and attempt to add Energy ModelLukasz Luba
Register devfreq cooling device and attempt to register Energy Model. This will add the devfreq device to the Energy Model framework. It will create a dedicated and unified data structures used i.e. in thermal framework. It uses simplified Energy Model, created based on voltage, frequency and DT 'dynamic-power-coefficient'. Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210143014.24685-6-lukasz.luba@arm.com
2020-12-11thermal: devfreq_cooling: remove old power model and use EMLukasz Luba
Remove old power model and use new Energy Model to calculate the power budget. It drops static + dynamic power calculations and power table in order to use Energy Model performance domain data. This model should be easy to use and could find more users. It is also less complicated to setup the needed structures. Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210143014.24685-5-lukasz.luba@arm.com
2020-12-11thermal: devfreq_cooling: add new registration functions with Energy ModelLukasz Luba
The Energy Model (EM) framework supports devices such as Devfreq. Create new registration function which automatically register EM for the thermal devfreq_cooling devices. This patch prepares the code for coming changes which are going to replace old power model with the new EM. Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210143014.24685-4-lukasz.luba@arm.com
2020-12-11thermal: devfreq_cooling: use a copy of device statusLukasz Luba
Devfreq cooling needs to now the correct status of the device in order to operate. Devfreq framework can change the device status in the background. To mitigate issues make a copy of the status structure and use it for internal calculations. In addition this patch adds normalization function, which also makes sure that whatever data comes from the device, the load will be in range from 1 to 1024. Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210143014.24685-3-lukasz.luba@arm.com
2020-12-11thermal: devfreq_cooling: change tracing function and argumentsLukasz Luba
Prepare for deleting the static and dynamic power calculation and clean the trace function. These two fields are going to be removed in the next changes. Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> # for tracing code Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201210143014.24685-2-lukasz.luba@arm.com
2020-12-11ALSA: usb-audio: Fix control 'access overflow' errors from chmapTakashi Iwai
The current channel-map control implementation in USB-audio driver may lead to an error message like "control 3:0:0:Playback Channel Map:0: access overflow" when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get callback clears the whole array no matter which count is set, and rather the false-positive detection. This patch fixes the problem by clearing only the needed array range at usb_chmap_ctl_get(). Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-11ALSA: hda/hdmi: always print pin NIDs as hexadecimalKai Vehmanen
The debug prints from patch_hdmi.c are not aligned with HDA common code in hda_codec.c nor with other HDA codec drivers. To align with rest of the codebase, use hexadecimal formatting whenever printing value of a HDA NID. Also refer to NIDs with capital letters in traces as is done other modules. This presentation is also aligned with the formatting used in HDA codec procfs entry. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20201211124547.3243871-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-12-11iommu/amd: Add sanity check for interrupt remapping table length macrosSuravee Suthikulpanit
Currently, macros related to the interrupt remapping table length are defined separately. This has resulted in an oversight in which one of the macros were missed when changing the length. To prevent this, redefine the macros to add built-in sanity check. Also, rename macros to use the name of the DTE[IntTabLen] field as specified in the AMD IOMMU specification. There is no functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Will Deacon <will@kernel.org> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20201210162436.126321-1-suravee.suthikulpanit@amd.com Signed-off-by: Will Deacon <will@kernel.org>
2020-12-11mac80211: add ieee80211_set_sar_specsCarl Huang
This change registers ieee80211_set_sar_specs to mac80211_config_ops, so cfg80211 can call it. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Abhishek Kumar <kuabhs@chromium.org> Link: https://lore.kernel.org/r/20201203103728.3034-3-cjhuang@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: add common API to configure SAR power limitationsCarl Huang
NL80211_CMD_SET_SAR_SPECS is added to configure SAR from user space. NL80211_ATTR_SAR_SPEC is used to pass the SAR power specification when used with NL80211_CMD_SET_SAR_SPECS. Wireless driver needs to register SAR type, supported frequency ranges to wiphy, so user space can query it. The index in frequency range is used to specify which sub band the power limitation applies to. The SAR type is for compatibility, so later other SAR mechanism can be implemented without breaking the user space SAR applications. Normal process is user space queries the SAR capability, and gets the index of supported frequency ranges and associates the power limitation with this index and sends to kernel. Here is an example of message send to kernel: 8c 00 00 00 08 00 01 00 00 00 00 00 38 00 2b 81 08 00 01 00 00 00 00 00 2c 00 02 80 14 00 00 80 08 00 02 00 00 00 00 00 08 00 01 00 38 00 00 00 14 00 01 80 08 00 02 00 01 00 00 00 08 00 01 00 48 00 00 00 NL80211_CMD_SET_SAR_SPECS: 0x8c NL80211_ATTR_WIPHY: 0x01(phy idx is 0) NL80211_ATTR_SAR_SPEC: 0x812b (NLA_NESTED) NL80211_SAR_ATTR_TYPE: 0x00 (NL80211_SAR_TYPE_POWER) NL80211_SAR_ATTR_SPECS: 0x8002 (NLA_NESTED) freq range 0 power: 0x38 in 0.25dbm unit (14dbm) freq range 1 power: 0x48 in 0.25dbm unit (18dbm) Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Abhishek Kumar <kuabhs@chromium.org> Link: https://lore.kernel.org/r/20201203103728.3034-2-cjhuang@codeaurora.org [minor edits, NLA parse cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: fix a mistake check for rx_stats updateWen Gong
It should be !is_multicast_ether_addr() in ieee80211_rx_h_sta_process() for the rx_stats update, below commit remove the !, this patch is to change it back. It lead the rx rate "iw wlan0 station dump" become invalid for some scenario when IEEE80211_HW_USES_RSS is set. Fixes: 09a740ce352e ("mac80211: receive and process S1G beacons") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1607483189-3891-1-git-send-email-wgong@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: mlme: save ssid info to ieee80211_bss_conf while assocWen Gong
The ssid info of ieee80211_bss_conf is filled in ieee80211_start_ap() for AP mode. For STATION mode, it is empty, save the info from struct ieee80211_mgd_assoc_data, the struct ieee80211_mgd_assoc_data will be freed after assoc, so the ssid info of ieee80211_mgd_assoc_data can not access after assoc, save ssid info to ieee80211_bss_conf, then ssid info can be still access after assoc. Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/1607312195-3583-2-git-send-email-wgong@codeaurora.org [reset on disassoc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: Update rate control on channel changeIlan Peer
A channel change or a channel bandwidth change can impact the rate control logic. However, the rate control logic was not updated before/after such a change, which might result in unexpected behavior. Fix this by updating the stations rate control logic when the corresponding channel context changes. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.600d967fe3c9.I48305f25cfcc9c032c77c51396e9e9b882748a86@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: don't filter out beacons once we start CSAEmmanuel Grumbach
I hit a bug in which we started a CSA with an action frame, but the AP changed its mind and didn't change the beacon. The CSA wasn't cancelled and we lost the connection. The beacons were ignored because they never changed: they never contained any CSA IE. Because they never changed, the CRC of the beacon didn't change either which made us ignore the beacons instead of processing them. Now what happens is: 1) beacon has CRC X and it is valid. No CSA IE in the beacon 2) as long as beacon's CRC X, don't process their IEs 3) rx action frame with CSA 4) invalidate the beacon's CRC 5) rx beacon, CRC is still X, but now it is invalid 6) process the beacon, detect there is no CSA IE 7) abort CSA Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.83470b8407e6.I739b907598001362744692744be15335436b8351@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: Fix calculation of minimal channel widthIlan Peer
When calculating the minimal channel width for channel context, the current operation Rx channel width of a station was used and not the overall channel width capability of the station, i.e., both for Tx and Rx. Fix ieee80211_get_sta_bw() to use the maximal channel width the station is capable. While at it make the function static. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.4387040b99a0.I74bcf19238f75a5960c4098b10e355123d933281@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: ignore country element TX power on 6 GHzJohannes Berg
Updates to the 802.11ax draft are coming that deprecate the country element in favour of the transmit power envelope element, and make the maximum transmit power level field in the triplets reserved, so if we parse them we'd use 0 dBm transmit power. Follow suit and completely ignore the element on 6 GHz for purposes of determining TX power. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.9abf9f6b4f88.Icb6e52af586edcc74f1f0360e8f6fc9ef2bfe8f5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: use bitfield helpers for BA session action framesJohannes Berg
Use the appropriate bitfield helpers for encoding and decoding the capability field in the BA session action frames instead of open-coding the shifts/masks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.0c46e5097cc0.I06e75706770c40b9ba1cabd1f8a78ab7a05c5b73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: support Rx timestamp calculation for all preamble typesAvraham Stern
Add support for calculating the Rx timestamp for HE frames. Since now all frame types are supported, allow setting the Rx timestamp regardless of the frame type. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.4786559af475.Ia54486bb0a12e5351f9d5c60ef6fcda7c9e7141c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: don't set set TDLS STA bandwidth wider than possibleJohannes Berg
When we set up a TDLS station, we set sta->sta.bandwidth solely based on the capabilities, because the "what's the current bandwidth" check is bypassed and only applied for other types of stations. This leads to the unfortunate scenario that the sta->sta.bandwidth is 160 MHz if both stations support it, but we never actually configure this bandwidth unless the AP is already using 160 MHz; even for wider bandwidth support we only go up to 80 MHz (at least right now.) For iwlwifi, this can also lead to firmware asserts, telling us that we've configured the TX rates for a higher bandwidth than is actually available due to the PHY configuration. For non-TDLS, we check against the interface's requested bandwidth, but we explicitly skip this check for TDLS to cope with the wider BW case. Change this to (a) still limit to the TDLS peer's own chandef, which gets factored into the overall PHY configuration we request from the driver, and (b) limit it to when the TDLS peer is authorized, because it's only factored into the channel context in this case. Fixes: 504871e602d9 ("mac80211: fix bandwidth computation for TDLS peers") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.fcc7d29c4590.I11f77e9e25ddf871a3c8d5604650c763e2c5887a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: support driver-based disconnect with reconnect hintJohannes Berg
Support the driver indicating that a disconnection needs to be performed, and pass through the reconnect hint in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.5c8dab7a22a0.I58459fdf6968b16c90cab9c574f0f04ca22b0c79@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: support immediate reconnect request hintJohannes Berg
There are cases where it's necessary to disconnect, but an immediate reconnection is desired. Support a hint to userspace that this is the case, by including a new attribute in the deauth or disassoc event. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.58d33941fb9d.I0e7168c205c7949529c8e3b86f3c9b12c01a7017@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: use struct assignment for he_obss_pdJohannes Berg
Use a struct assignment here, which is clearer than the memcpy() and type-safe as well. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.2ab3aad7d5fc.Iaca4ee6db651b7de17e4351f4be7973ff8600186@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: remove struct ieee80211_he_bss_colorJohannes Berg
We don't really use this struct, we're now using struct cfg80211_he_bss_color instead. Change the one place in mac80211 that's using the old name to use struct assignment instead of memcpy() and thus remove the wrong sizeof while at it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.f6698d97ae4e.Iba2dffcb79c4ab80bde7407609806010b55edfdf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: validate key indexes for cfg80211_registered_deviceAnant Thazhemadam
syzbot discovered a bug in which an OOB access was being made because an unsuitable key_idx value was wrongly considered to be acceptable while deleting a key in nl80211_del_key(). Since we don't know the cipher at the time of deletion, if cfg80211_validate_key_settings() were to be called directly in nl80211_del_key(), even valid keys would be wrongly determined invalid, and deletion wouldn't occur correctly. For this reason, a new function - cfg80211_valid_key_idx(), has been created, to determine if the key_idx value provided is valid or not. cfg80211_valid_key_idx() is directly called in 2 places - nl80211_del_key(), and cfg80211_validate_key_settings(). Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org [also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: include block-tx flag in channel switch started eventJohannes Berg
In the NL80211_CMD_CH_SWITCH_STARTED_NOTIFY event, include the NL80211_ATTR_CH_SWITCH_BLOCK_TX flag attribute if block-tx was requested by the AP. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8953ef22cc64.Ifee9cab337a4369938545920ba5590559e91327a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: disallow band-switch during CSAJohannes Berg
If the AP advertises a band switch during CSA, we will not have the right information to continue working with it, since it will likely (have to) change its capabilities and we don't track any capability changes at all. Additionally, we store e.g. supported rates per band, and that information would become invalid. Since this is a fringe scenario, just disconnect explicitly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.0e2327107c06.I461adb07704e056b054a4a7c29b80c95a9f56637@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11ieee80211: update reduced neighbor report TBTT info lengthAvraham Stern
A new field (20MHz PSD - 1 byte) was added to the RNR TBTT info field. Adjust the expected TBTT info length accordingly. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.b503adccce6a.Ie684e1d3039c111bf2d521bf762aaec3f7a24d2e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Save the regulatory domain when setting custom regulatoryIlan Peer
When custom regulatory was set, only the channels setting was updated, but the regulatory domain was not saved. Fix it by saving it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.290fa5c5568a.Ic5732aa64de6ee97ae3578bd5779fc723ba489d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: always accept scan request with the duration setAvraham Stern
Accept a scan request with the duration set even if the driver does not support setting the scan dwell. The duration can be used as a hint to the driver, but the driver may use its internal logic for setting the scan dwell. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.9491a12f9226.Ia9c5b24fcefc5ce5592537507243391633a27e5f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Update TSF and TSF BSSID for multi BSSIlan Peer
When a new BSS entry is created based on multi BSS IE, the TSF and the TSF BSSID were not updated. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8377d5063827.I6f2011b6017c2ad507c61a3f1ca03b7177a46e32@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: scan PSC channels in case of scan with wildcard SSIDAyala Beker
In case of scan request with wildcard SSID, or in case of more than one SSID in scan request, need to scan PSC channels even though all the co-located APs found during the legacy bands scan indicated that all the APs in their ESS are co-located, as we might find different networks on the PSC channels. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.736415a9ca5d.If5b3578ae85e11a707a5da07e66ba85928ba702c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: Skip entries with SAE H2E only membership selectorIlan Peer
When parsing supported rates IE. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.8228e2be791e.I626c93241fef66bc71aa0cb9719aba1b11232cf1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Parse SAE H2E only membership selectorIlan Peer
This extends the support for drivers that rebuild IEs in the FW (same as with HT/VHT/HE). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.4012647275f3.I1a93ae71c57ef0b6f58f99d47fce919d19d65ff0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: support MIC error/replay detected counters driver updateJohannes Berg
Support the driver incrementing MIC error and replay detected counters when having detected a bad frame, if it drops it directly instead of relying on mac80211 to do the checks. These are then exposed to userspace, though currently only in some cases and in debugfs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.fb59be9c6de8.Ife2260887366f585afadd78c983ebea93d2bb54b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: he: remove non-bss-conf fields from bss_confShaul Triebitz
ack_enabled and multi_sta_back_32bit are station capabilities and should not be in the bss_conf structure. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201129172929.69a7f7753444.I405c4b5245145e24577512c477f19131d4036489@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: remove trailing semicolon in macro definitionsTom Rix
The macro uses should have (and already have) the semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201127193842.2876355-1-trix@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/fe5afd456a1244751177e53359d3dd149a63a873.1605896060.git.gustavoars@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/1a9c4e8248e76e1361edbe2471a68773d87f0b67.1605896060.git.gustavoars@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ed94a115106fa9c6df94d09b2a6c5791c618c4f2.1605896059.git.gustavoars@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: fix callback type mismatches in wext-compatSami Tolvanen
Instead of casting callback functions to type iw_handler, which trips indirect call checking with Clang's Control-Flow Integrity (CFI), add stub functions with the correct function type for the callbacks. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201117205902.405316-1-samitolvanen@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11net: wireless: make a const array static, makes object smallerColin Ian King
Don't populate the const array bws on the stack but instead it static. Makes the object code smaller by 80 bytes: Before: text data bss dec hex filename 85694 16865 1216 103775 1955f ./net/wireless/reg.o After: text data bss dec hex filename 85518 16961 1216 103695 1950f ./net/wireless/reg.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201116181636.362729-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11net: mac80211: use core API for updating TX/RX statsLev Stipakov
Commits d3fd65484c781 ("net: core: add dev_sw_netstats_tx_add") 451b05f413d3f ("net: netdevice.h: sw_netstats_rx_add helper) have added API to update net device per-cpu TX/RX stats. Use core API instead of ieee80211_tx/rx_stats(). Signed-off-by: Lev Stipakov <lev@openvpn.net> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20201113214623.144663-1-lev@openvpn.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11rfkill: add a reason to the HW rfkill stateEmmanuel Grumbach
The WLAN device may exist yet not be usable. This can happen when the WLAN device is controllable by both the host and some platform internal component. We need some arbritration that is vendor specific, but when the device is not available for the host, we need to reflect this state towards the user space. Add a reason field to the rfkill object (and event) so that userspace can know why the device is in rfkill: because some other platform component currently owns the device, or because the actual hw rfkill signal is asserted. Capable userspace can now determine the reason for the rfkill and possibly do some negotiation on a side band channel using a proprietary protocol to gain ownership on the device in case the device is owned by some other component. When the host gains ownership on the device, the kernel can remove the RFKILL_HARD_BLOCK_NOT_OWNER reason and the hw rfkill state will be off. Then, the userspace can bring the device up and start normal operation. The rfkill_event structure is enlarged to include the additional byte, it is now 9 bytes long. Old user space will ask to read only 8 bytes so that the kernel can know not to feed them with more data. When the user space writes 8 bytes, new kernels will just read what is present in the file descriptor. This new byte is read only from the userspace standpoint anyway. If a new user space uses an old kernel, it'll ask to read 9 bytes but will get only 8, and it'll know that it didn't get the new state. When it'll write 9 bytes, the kernel will again ignore this new byte which is read only from the userspace standpoint. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20201104134641.28816-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11usb: typec: tcpm: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085553.2982-1-zhengyongjun3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11crypto: qat - add capability detection logic in qat_4xxxMarco Chiappero
Add logic to detect device capabilities in qat_4xxx driver. Read fuses and build the device capabilities mask. This will enable services and handling specific to QAT 4xxx devices. Co-developed-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com> Signed-off-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com> Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-12-11crypto: qat - add AES-XTS support for QAT GEN4 devicesMarco Chiappero
Add handling of AES-XTS specific to QAT GEN4 devices. Co-developed-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com> Signed-off-by: Tomaszx Kowalik <tomaszx.kowalik@intel.com> Signed-off-by: Marco Chiappero <marco.chiappero@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-14 22:54:28 +0000