Age | Commit message (Collapse) | Author |
|
Expand IPV6_TCLASS to also cover IP_TOS.
Expand IPV6_HOPLIMIT to also cover IP_TTL.
Expand csmg_sender.c to allow setting IPv4 setsockopts.
Also rename struct v6 to cmsg to match its expanded scope.
Don't bother updating all occurrences of tclass and hoplimit.
Rename cmsg_ipv6.sh to cmsg_ip.sh to match the expanded scope.
Be careful around the subtle API difference between TCLASS and TOS.
IP_TOS includes ECN bits. Add a test to verify that these are masked
when making routing decisions.
Diff is more concise with --word-diff
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move IPV6_TCLASS and IPV6_HOPLIMIT into loops, to be able to use them
for IP_TOS and IP_TTL in a follow-on patch.
Indentation in this file is a mix of four spaces and tabs for double
indents. To minimize code churn, maintain that pattern.
Very small diff if viewing with -w.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_schedule() is expected to be called either:
* From an interrupt, where raised softirqs are handled on IRQ exit
* From a softirq disabled section, where raised softirqs are handled on
the next call to local_bh_enable().
* From a softirq handler, where raised softirqs are handled on the next
round in do_softirq(), or further deferred to a dedicated kthread.
Other bare tasks context may end up ignoring the raised NET_RX vector
until the next random softirq handling opportunity, which may not
happen before a while if the CPU goes idle afterwards with the tick
stopped.
Such "misuses" have been detected on several places thanks to messages
of the kind:
"NOHZ tick-stop error: local softirq work is pending, handler #08!!!"
For example:
__raise_softirq_irqoff
__napi_schedule
rtl8152_runtime_resume.isra.0
rtl8152_resume
usb_resume_interface.isra.0
usb_resume_both
__rpm_callback
rpm_callback
rpm_resume
__pm_runtime_resume
usb_autoresume_device
usb_remote_wakeup
hub_event
process_one_work
worker_thread
kthread
ret_from_fork
ret_from_fork_asm
And also:
* drivers/net/usb/r8152.c::rtl_work_func_t
* drivers/net/netdevsim/netdev.c::nsim_start_xmit
There is a long history of issues of this kind:
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
330068589389 ("idpf: disable local BH when scheduling napi for marker packets")
e3d5d70cb483 ("net: lan78xx: fix "softirq work is pending" error")
e55c27ed9ccf ("mt76: mt7615: add missing bh-disable around rx napi schedule")
c0182aa98570 ("mt76: mt7915: add missing bh-disable around tx napi enable/schedule")
970be1dff26d ("mt76: disable BH around napi_schedule() calls")
019edd01d174 ("ath10k: sdio: Add missing BH locking around napi_schdule()")
30bfec4fec59 ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
e63052a5dd3c ("mlx5e: add add missing BH locking around napi_schdule()")
83a0c6e58901 ("i40e: Invoke softirqs after napi_reschedule")
bd4ce941c8d5 ("mlx4: Invoke softirqs after napi_reschedule")
8cf699ec849f ("mlx4: do not call napi_schedule() without care")
ec13ee80145c ("virtio_net: invoke softirqs after __napi_schedule")
This shows that relying on the caller to arrange a proper context for
the softirqs to be handled while calling napi_schedule() is very fragile
and error prone. Also fixing them can also prove challenging if the
caller may be called from different kinds of contexts.
Therefore fix this from napi_schedule() itself with waking up ksoftirqd
when softirqs are raised from task contexts.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Closes: https://lore.kernel.org/lkml/354a2690-9bbf-4ccb-8769-fa94707a9340@molgen.mpg.de/
Cc: Breno Leitao <leitao@debian.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250223221708.27130-1-frederic@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In certain cases, napi_get_frags() returns an skb that points to an old
received fragment, This skb may have its skb->ip_summed, csum, and other
fields set from previous fragment handling.
Some network drivers set skb->ip_summed to either CHECKSUM_COMPLETE or
CHECKSUM_UNNECESSARY when getting skb from napi_get_frags(), while
others only set skb->ip_summed when RX checksum offload is enabled on
the device, and do not set any value for skb->ip_summed when hardware
checksum offload is disabled, assuming that the skb->ip_summed
initiated to zero by napi_reuse_skb, ionic driver for example will
ignore/unset any value for the ip_summed filed if HW checksum offload is
disabled, and if we have a situation where the user disables the
checksum offload during a traffic that could lead to the following
errors shown in the kernel logs:
<IRQ>
dump_stack_lvl+0x34/0x48
__skb_gro_checksum_complete+0x7e/0x90
tcp6_gro_receive+0xc6/0x190
ipv6_gro_receive+0x1ec/0x430
dev_gro_receive+0x188/0x360
? ionic_rx_clean+0x25a/0x460 [ionic]
napi_gro_frags+0x13c/0x300
? __pfx_ionic_rx_service+0x10/0x10 [ionic]
ionic_rx_service+0x67/0x80 [ionic]
ionic_cq_service+0x58/0x90 [ionic]
ionic_txrx_napi+0x64/0x1b0 [ionic]
__napi_poll+0x27/0x170
net_rx_action+0x29c/0x370
handle_softirqs+0xce/0x270
__irq_exit_rcu+0xa3/0xc0
common_interrupt+0x80/0xa0
</IRQ>
This inconsistency sometimes leads to checksum validation issues in the
upper layers of the network stack.
To resolve this, this patch clears the skb->ip_summed value for each
reused skb in by napi_reuse_skb(), ensuring that the caller is responsible
for setting the correct checksum status. This eliminates potential
checksum validation issues caused by improper handling of
skb->ip_summed.
Fixes: 76620aafd66f ("gro: New frags interface to avoid copying shinfo")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250225112852.2507709-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Yong-Hao Zou mentioned that linux was not strict as other OS in 3WHS,
for flows using TCP TS option (RFC 7323)
As hinted by an old comment in tcp_check_req(),
we can check the TSEcr value in the incoming packet corresponds
to one of the SYNACK TSval values we have sent.
In this patch, I record the oldest and most recent values
that SYNACK packets have used.
Send a challenge ACK if we receive a TSEcr outside
of this range, and increase a new SNMP counter.
nstat -az | grep TSEcrRejected
TcpExtTSEcrRejected 0 0.0
Due to TCP fastopen implementation, do not apply yet these checks
for fastopen flows.
v2: No longer use req->num_timeout, but treq->snt_tsval_first
to detect when first SYNACK is prepared. This means
we make sure to not send an initial zero TSval.
Make sure MPTCP and TCP selftests are passing.
Change MIB name to TcpExtTSEcrRejected
v1: https://lore.kernel.org/netdev/CADVnQykD8i4ArpSZaPKaoNxLJ2if2ts9m4As+=Jvdkrgx1qMHw@mail.gmail.com/T/
Reported-by: Yong-Hao Zou <yonghaoz1994@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225171048.3105061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a queue is stopped using the ndo queue API, before
destroying its page pool, the associated NAPI instance
needs to be unlinked to avoid warnings.
Handle this by calling page_pool_disable_direct_recycling()
when stopping a queue.
Cc: stable@vger.kernel.org
Fixes: ebdfae0d377b ("gve: adopt page pool for DQ RDA mode")
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250226003526.1546854-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao reported the splat below. [0]
Commit 65161fb544aa ("net: Fix dev_net(dev) race in
unregister_netdevice_notifier_dev_net().") added the
DEBUG_NET_WARN_ON_ONCE(), assuming that the netdev is not
registered before register_netdevice_notifier_dev_net().
But the assumption was simply wrong.
Let's use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
[0]:
WARNING: CPU: 25 PID: 849 at net/core/dev.c:2150 register_netdevice_notifier_dev_net (net/core/dev.c:2150)
<TASK>
? __warn (kernel/panic.c:242 kernel/panic.c:748)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? report_bug (lib/bug.c:? lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:285)
? exc_invalid_op (arch/x86/kernel/traps.c:309)
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? register_netdevice_notifier_dev_net (net/core/dev.c:2150)
? register_netdevice_notifier_dev_net (./include/net/net_namespace.h:406 ./include/linux/netdevice.h:2663 net/core/dev.c:2144)
mlx5e_mdev_notifier_event+0x9f/0xf0 mlx5_ib
notifier_call_chain.llvm.12241336988804114627 (kernel/notifier.c:85)
blocking_notifier_call_chain (kernel/notifier.c:380)
mlx5_core_uplink_netdev_event_replay (drivers/net/ethernet/mellanox/mlx5/core/main.c:352)
mlx5_ib_roce_init.llvm.12447516292400117075+0x1c6/0x550 mlx5_ib
mlx5r_probe+0x375/0x6a0 mlx5_ib
? kernfs_put (./include/linux/instrumented.h:96 ./include/linux/atomic/atomic-arch-fallback.h:2278 ./include/linux/atomic/atomic-instrumented.h:1384 fs/kernfs/dir.c:557)
? auxiliary_match_id (drivers/base/auxiliary.c:174)
? mlx5r_mp_remove+0x160/0x160 mlx5_ib
really_probe (drivers/base/dd.c:? drivers/base/dd.c:658)
driver_probe_device (drivers/base/dd.c:830)
__driver_attach (drivers/base/dd.c:1217)
bus_for_each_dev (drivers/base/bus.c:369)
? driver_attach (drivers/base/dd.c:1157)
bus_add_driver (drivers/base/bus.c:679)
driver_register (drivers/base/driver.c:249)
Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/20250224-noisy-cordial-roadrunner-fad40c@leitao/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250225211023.96448-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
"A couple small ones, the main user visible changes/fixes are:
- Fix a bug where truncate would rarely fail and return 1
- Revert the directory i_size code: this turned out to have a number
of issues that weren't noticed because the fsck code wasn't
correctly reporting errors (ouch), and we're late enough in the
cycle that it can just wait until 6.15"
* tag 'bcachefs-2025-02-26' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix truncate sometimes failing and returning 1
bcachefs: Fix deadlock
bcachefs: Check for -BCH_ERR_open_buckets_empty in journal resize
bcachefs: Revert directory i_size
bcachefs: fix bch2_extent_ptr_eq()
bcachefs: Fix memmove when move keys down
bcachefs: print op->nonce on data update inconsistency
|
|
__bch_truncate_folio() may return 1 to indicate dirtyness of the folio
being truncated, needed for fpunch to get the i_size writes correct.
But truncate was forgetting to clear ret, and sometimes returning it as
an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes two deadlocks:
1.pcpu_alloc_mutex involved one as pointed by syzbot[1]
2.recursion deadlock.
The root cause is that we hold the bc lock during alloc_percpu, fix it
by following the pattern used by __btree_node_mem_alloc().
[1] https://lore.kernel.org/all/66f97d9a.050a0220.6bad9.001d.GAE@google.com/T/
Reported-by: syzbot+fe63f377148a6371a9db@syzkaller.appspotmail.com
Tested-by: syzbot+fe63f377148a6371a9db@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes occasional failures from journal resize.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This turned out to have several bugs, which were missed because the fsck
code wasn't properly reporting errors - whoops.
Kicking it out for now, hopefully it can make 6.15.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When the range of present physical memory is sufficiently small enough
and the reserved address space for the linear map is sufficiently large
enough, The linear map base address is randomized in
arm64_memblock_init().
Prior to commit 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and
use it consistently"), we decided if the sizes were suitable with the
help of the raw mmfr0.parange. But the commit changed this to use the
sanitized version instead. But the function runs before the register has
been sanitized so this returns 0, interpreted as a parange of 32 bits.
Some fun wrapping occurs and the logic concludes that there is enough
room to randomize the linear map base address, when really there isn't.
So the top of the linear map ends up outside the reserved address space.
Since the PA range cannot be overridden in the first place, restore the
mmfr0 reading logic to its state prior to 62cffa496aac, where the raw
register value is used.
Reported-by: Luiz Capitulino <luizcap@redhat.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Closes: https://lore.kernel.org/all/a3d9acbe-07c2-43b6-9ba9-a7585f770e83@redhat.com/
Fixes: 62cffa496aac ("arm64/mm: Override PARange for !LPA2 and use it consistently")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250225114638.2038006-1-ryan.roberts@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add error message when the number of entry argument exceeds the
maximum size of entry data.
This is currently checked when registering fprobe, but in this case
no error message is shown in the error_log file.
Link: https://lore.kernel.org/all/174055074269.4079315.17809232650360988538.stgit@mhiramat.tok.corp.google.com/
Fixes: 25f00e40ce79 ("tracing/probes: Support $argN in return probe (kprobe and fprobe)")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit 57a7e6de9e30 ("tracing/fprobe: Support raw tracepoints on
future loaded modules") allows user to set a tprobe on non-exist
tracepoint but it does not check the tracepoint name is acceptable.
So it leads tprobe has a wrong character for events (e.g. with
subsystem prefix). In this case, the event is not shown in the
events directory.
Reject such invalid tracepoint name.
The tracepoint name must consist of alphabet or digit or '_'.
Link: https://lore.kernel.org/all/174055073461.4079315.15875502830565214255.stgit@mhiramat.tok.corp.google.com/
Fixes: 57a7e6de9e30 ("tracing/fprobe: Support raw tracepoints on future loaded modules")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
|
|
Fix a memory leak when a tprobe is defined with $retval. This
combination is not allowed, but the parse_symbol_and_return() does
not free the *symbol which should not be used if it returns the error.
Thus, it leaks the *symbol memory in that error path.
Link: https://lore.kernel.org/all/174055072650.4079315.3063014346697447838.stgit@mhiramat.tok.corp.google.com/
Fixes: ce51e6153f77 ("tracing: fprobe-event: Fix to check tracepoint event and return")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small ufs fixes and a core change to clear the command private area on
every retry (which fixes a reported bug in virtio_scsi)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: bsg: Fix crash when arpmb command fails
scsi: ufs: core: Set default runtime/system PM levels before ufshcd_hba_init()
scsi: core: Clear driver private data when retrying request
scsi: ufs: core: Fix ufshcd_is_ufs_dev_busy() and ufshcd_eh_timed_out()
|
|
The commit b1f8921dfbaa
("i2c: amd-asf: Clear remote IRR bit to get successive interrupt")
introduced a method to enable successive interrupts but inadvertently
omitted the necessary write to the EOI register, resulting in a failure to
receive successive interrupts.
Fix this by adding the required write to the EOI register.
Fixes: b1f8921dfbaa ("i2c: amd-asf: Clear remote IRR bit to get successive interrupt")
Cc: stable@vger.kernel.org # v6.13+
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Fixes: 9b25419ad397 ("i2c: amd-asf: Add routine to handle the ASF slave process")
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250219135747.3251182-1-Shyam-sundar.S-k@amd.com
|
|
According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb()/writeb()).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Fixes: 015e61f0bffd ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250220125612.1910990-1-zhoubinbin@loongson.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue update from Tejun Heo:
"This contains a patch improve debug visibility.
While it isn't a fix, the change carries virtually no risk and makes
it substantially easier to chase down a class of problems"
* tag 'wq-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Log additional details when rejecting work
|
|
The customer reports that there is a soft lockup issue related to
the i2c driver. After checking, the i2c module was doing a tx transfer
and the bmc machine reboots in the middle of the i2c transaction, the i2c
module keeps the status without being reset.
Due to such an i2c module status, the i2c irq handler keeps getting
triggered since the i2c irq handler is registered in the kernel booting
process after the bmc machine is doing a warm rebooting.
The continuous triggering is stopped by the soft lockup watchdog timer.
Disable the interrupt enable bit in the i2c module before calling
devm_request_irq to fix this issue since the i2c relative status bit
is read-only.
Here is the soft lockup log.
[ 28.176395] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:1]
[ 28.183351] Modules linked in:
[ 28.186407] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.120-yocto-s-dirty-bbebc78 #1
[ 28.201174] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 28.208128] pc : __do_softirq+0xb0/0x368
[ 28.212055] lr : __do_softirq+0x70/0x368
[ 28.215972] sp : ffffff8035ebca00
[ 28.219278] x29: ffffff8035ebca00 x28: 0000000000000002 x27: ffffff80071a3780
[ 28.226412] x26: ffffffc008bdc000 x25: ffffffc008bcc640 x24: ffffffc008be50c0
[ 28.233546] x23: ffffffc00800200c x22: 0000000000000000 x21: 000000000000001b
[ 28.240679] x20: 0000000000000000 x19: ffffff80001c3200 x18: ffffffffffffffff
[ 28.247812] x17: ffffffc02d2e0000 x16: ffffff8035eb8b40 x15: 00001e8480000000
[ 28.254945] x14: 02c3647e37dbfcb6 x13: 02c364f2ab14200c x12: 0000000002c364f2
[ 28.262078] x11: 00000000fa83b2da x10: 000000000000b67e x9 : ffffffc008010250
[ 28.269211] x8 : 000000009d983d00 x7 : 7fffffffffffffff x6 : 0000036d74732434
[ 28.276344] x5 : 00ffffffffffffff x4 : 0000000000000015 x3 : 0000000000000198
[ 28.283476] x2 : ffffffc02d2e0000 x1 : 00000000000000e0 x0 : ffffffc008bdcb40
[ 28.290611] Call trace:
[ 28.293052] __do_softirq+0xb0/0x368
[ 28.296625] __irq_exit_rcu+0xe0/0x100
[ 28.300374] irq_exit+0x14/0x20
[ 28.303513] handle_domain_irq+0x68/0x90
[ 28.307440] gic_handle_irq+0x78/0xb0
[ 28.311098] call_on_irq_stack+0x20/0x38
[ 28.315019] do_interrupt_handler+0x54/0x5c
[ 28.319199] el1_interrupt+0x2c/0x4c
[ 28.322777] el1h_64_irq_handler+0x14/0x20
[ 28.326872] el1h_64_irq+0x74/0x78
[ 28.330269] __setup_irq+0x454/0x780
[ 28.333841] request_threaded_irq+0xd0/0x1b4
[ 28.338107] devm_request_threaded_irq+0x84/0x100
[ 28.342809] npcm_i2c_probe_bus+0x188/0x3d0
[ 28.346990] platform_probe+0x6c/0xc4
[ 28.350653] really_probe+0xcc/0x45c
[ 28.354227] __driver_probe_device+0x8c/0x160
[ 28.358578] driver_probe_device+0x44/0xe0
[ 28.362670] __driver_attach+0x124/0x1d0
[ 28.366589] bus_for_each_dev+0x7c/0xe0
[ 28.370426] driver_attach+0x28/0x30
[ 28.373997] bus_add_driver+0x124/0x240
[ 28.377830] driver_register+0x7c/0x124
[ 28.381662] __platform_driver_register+0x2c/0x34
[ 28.386362] npcm_i2c_init+0x3c/0x5c
[ 28.389937] do_one_initcall+0x74/0x230
[ 28.393768] kernel_init_freeable+0x24c/0x2b4
[ 28.398126] kernel_init+0x28/0x130
[ 28.401614] ret_from_fork+0x10/0x20
[ 28.405189] Kernel panic - not syncing: softlockup: hung tasks
[ 28.411011] SMP: stopping secondary CPUs
[ 28.414933] Kernel Offset: disabled
[ 28.418412] CPU features: 0x00000000,00000802
[ 28.427644] Rebooting in 20 seconds..
Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tyrone Ting <kfting@nuvoton.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250220040029.27596-2-kfting@nuvoton.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
"pick_task_scx() has a workaround to avoid stalling when the fair
class's balance() says yes but pick_task() says no.
The workaround was incorrectly deciding to keep the prev taks running
if the task is on SCX even when the task is in a sleeping state, which
can lead to several confusing failure modes.
Fix it by testing the prev task is currently queued on SCX instead"
* tag 'sched_ext-for-6.14-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()
|
|
Pull NFS client fixes from Anna Schumaker:
"Stable Fixes:
- O_DIRECT writes should adjust file length
Other Bugfixes:
- Adjust delegated timestamps for O_DIRECT reads and writes
- Prevent looping due to rpc_signal_task() races
- Fix a deadlock when recovering state on a sillyrenamed file
- Properly handle -ETIMEDOUT errors from tlshd
- Suppress build warnings for unused procfs functions
- Fix memory leak of lsm_contexts"
* tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
lsm,nfs: fix memory leak of lsm_context
sunrpc: suppress warnings for unused procfs functions
SUNRPC: Handle -ETIMEDOUT return from tlshd
NFSv4: Fix a deadlock when recovering state on a sillyrenamed file
SUNRPC: Prevent looping due to rpc_signal_task() races
NFS: Adjust delegated timestamps for O_DIRECT reads and writes
NFS: O_DIRECT writes must check and adjust the file length
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"One bugfix and one spelling cleanup. The bug fix restores a
performance improvement"
* tag 'integrity-v6.14-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Reset IMA_NONACTION_RULE_FLAGS after post_setattr
integrity: fix typos and spelling errors
|
|
'alignment'"
This reverts commit 267b21d0bef8e67dbe6c591c9991444e58237ec9.
Turns out some DTs do depend on this behavior. Specifically, a
downstream Pixel 6 DT. Revert the change at least until we can decide if
the DT spec can be changed instead.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Keep user-forced connector status even if it cannot be programmed. Same
behavior as for the rest of the drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250114100214.195386-1-tzimmermann@suse.de
|
|
Add the defintition of those APIs, those will be used in a later patch.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.d842253ee55d.I2e8d65f22d5acde70ed6be16f913160a93d06852@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This macro represents the number of IGTKS the FW can support.
Will be used in a later patch.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.a8e3c7461f13.If63cbc73eaf328b2c1d7c8e57627eb93c35b0c70@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This adds the API definitions needed for OMI bandwidth reduction.
Will be used in a later patches.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.4d34e8f5a3df.Idd6185cdb8d8a133f92032db9278c1510961cbdc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is not op mode specific.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.c99748f63511.I5c8dcc46e992e76c82fdf7dbee65957cbdca1b43@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will allow to read the table once, and not any time the command is
sent. The actual use of this will be in a later patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.61801b78a2cb.I710a766888f370a75b47116fec29d41c106b13ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will now be called from another opmode we are writing.
iwl_fill_lari_config will only be used for the older ones.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.9bb7fbc592a6.I8850691eac7c8471257f3031e8c05905afc72f70@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In case the BIOS allows it, instruct the firmware to use the external 32
KHz clock.
The op mode specific implementation (i.e. reading the BIOS table) will
come in a later patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.9aae3f74fee0.I25ae45ef02b9ea387b512f974c1f3e5367a537e5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is required for EHT related debug prints.
As there are no more available debug levels, delete IWL_DL_EXTERNAL,
which is not used, and replace it with IWL_DL_EHT.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.9b1e0d87e7e4.Iea6c1329f7b6312a73896f9a9d9bce72bd6548e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is required for PTP related debug prints.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.866f8f66b1d7.I764abcb845d992d058c753ce8fa9d45fed2ff4ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is not specific to mvm.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.c536eeaae129.I848307be6df21913c0ce3eb6baef715cd401db1a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware is now able to understand 0xff and that is more widely
used.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.c6719e6dc0a6.Ifd149101fa886730602dbbb02f980be8e554fe84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Remove the version suffix from the latest version of the range
request command structs and the range response notification structs.
In addition, don't use MVM in the API file as it is not MVM specific.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.294b7109e0be.I229ceef5933e825815d84c33855cadd62687ee04@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This information is exposed to userspace but not drivers. Make this
field public so that drivers are also able to access it. The information
is for example useful for link selection to determine whether the BSS
corresponding to an MLO link has been seen in a recent scan.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212082137.b682ee7aebc8.I0f7cca9effa2b1cee79f4f2eb8b549c99b4e0571@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a chanctx iterator that can be called from a wiphy-locked context.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212082137.d85eef3024de.Icda0616416c5fd4b2cbf892bdab2476f26e644ec@changeid
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the new_metric and last_hop_metric variables can reach
the MAX_METRIC(0xffffffff) value, an integer overflow may occur
when multiplying them by 10/9. It can lead to incorrect behavior.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: a8d418d9ac25 ("mac80211: mesh: only switch path when new metric is at least 10% better")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20250212082124.4078236-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix a possible integer promotion issue in mac80211 in ieee80211_ml_epcs()
Fixes: de86c5f60839 ("wifi: mac80211: Add support for EPCS configuration")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250214074721.1613549-1-ilan.peer@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250219203240.141272-1-eahariha@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Count open monitor interfaces regardless of the monitor interface type.
The new counter virt_monitors takes over counting interfaces depending
on the virtual monitor interface while monitors is used for all active
monitor interfaces.
This fixes monitor packet mirroring when using MONITOR_FLAG_ACTIVE or
NO_VIRTUAL_MONITOR interfaces.
Fixes: 286e69677065 ("wifi: mac80211: Drop cooked monitor support")
Reported-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Closes: https://lore.kernel.org/r/cc715114-4e3b-619a-49dc-a4878075e1dc@quicinc.com
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Tested-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250220094139.61459-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The reference to il_rate_mcs is inside of an #ifdef, causing a W=1 warning:
drivers/net/wireless/intel/iwlegacy/4965-rs.c:189:38: error: unused variable 'il_rate_mcs' [-Werror,-Wunused-const-variable]
static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {
Replace the #ifdef with a PTR_IF() for better compile time analysis.
The dead code will still get eliminated, but the warning goes away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225145359.1126786-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a data sector on an OFS floppy contains a value > 0x1e8 (the
largest amount of data that fits in the sector after its header), then
an Amiga reading the file can return corrupt data, by taking the
overlarge size at its word and reading past the end of the buffer it
read the disk sector into!
The cause: when affs_write_end_ofs() writes data to an OFS filesystem,
the new size field for a data block was computed by adding the amount
of data currently being written (into the block) to the existing value
of the size field. This is correct if you're extending the file at the
end, but if you seek backwards in the file and overwrite _existing_
data, it can lead to the size field being larger than the maximum
legal value.
This commit changes the calculation so that it sets the size field to
the max of its previous size and the position within the block that we
just wrote up to.
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If I write a file to an OFS floppy image, and try to read it back on
an emulated Amiga running Workbench 1.3, the Amiga reports a disk
error trying to read the file. (That is, it's unable to read it _at
all_, even to copy it to the NIL: device. It isn't a matter of getting
the wrong data and being unable to parse the file format.)
This is because the 'sequence number' field in the OFS data block
header is supposed to be based at 1, but affs writes it based at 0.
All three locations changed by this patch were setting the sequence
number to a variable 'bidx' which was previously obtained by dividing
a file position by bsize, so bidx will naturally use 0 for the first
block. Therefore all three should add 1 to that value before writing
it into the sequence number field.
With this change, the Amiga successfully reads the file.
For data block reference: https://wiki.osdev.org/FFS_(Amiga)
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on
suspend and then re-probed on resume.
This conflicts with some embedded boards that require to remain powered.
They will fail on resume with:
brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
This commit checks for the Device Tree property 'cap-power-off-cards'.
If this property is not set, it means that we do not have the capability
to power off and should therefore remain powered.
Signed-off-by: Matthias Proske <email@matthias-proske.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use rcu_access_pointer() to avoid sparse warning in
drv_remove_interface().
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502130534.bVrZZBK0-lkp@intel.com/
Fixes: 646262c71aca ("wifi: mac80211: remove debugfs dir for virtual monitor")
Link: https://patch.msgid.link/20250213214330.6113-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|