summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-30Merge tag 'mlx5-fixes-2020-04-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-04-29 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. v2: - Dropped the ktls patch, Tariq has to check if it is fixable in the stack For -stable v4.12 ('net/mlx5: Fix forced completion access non initialized command entry') ('net/mlx5: Fix command entry leak in Internal Error State') For -stable v5.4 ('net/mlx5: DR, On creation set CQ's arm_db member to right value') For -stable v5.6 ('net/mlx5e: Fix q counters on uplink representors') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mptcp: fix uninitialized value accessPaolo Abeni
tcp_v{4,6}_syn_recv_sock() set 'own_req' only when returning a not NULL 'child', let's check 'own_req' only if child is available to avoid an - unharmful - UBSAN splat. v1 -> v2: - reference the correct hash Fixes: 4c8941de781c ("mptcp: avoid flipping mp_capable field in syn_recv_sock()") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30Merge branch 'mptcp-fix-incoming-options-parsing'David S. Miller
Paolo Abeni says: ==================== mptcp: fix incoming options parsing This series addresses a serious issue in MPTCP option parsing. This is bigger than the usual -net change, but I was unable to find a working, sane, smaller fix. The core change is inside patch 2/5 which moved MPTCP options parsing from the TCP code inside existing MPTCP hooks and clean MPTCP options status on each processed packet. The patch 1/5 is a needed pre-requisite, and patches 3,4,5 are smaller, related fixes. v1 -> v2: - cleaned-up patch 1/5 - rebased on top of current -net ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mptcp: initialize the data_fin field for mpc packetsPaolo Abeni
When parsing MPC+data packets we set the dss field, so we must also initialize the data_fin, or we can find stray value there. Fixes: 9a19371bf029 ("mptcp: fix data_fin handing in RX path") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mptcp: fix 'use_ack' option access.Paolo Abeni
The mentioned RX option field is initialized only for DSS packet, we must access it only if 'dss' is set too, or the subflow will end-up in a bad status, leading to RFC violations. Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mptcp: avoid a WARN on bad input.Paolo Abeni
Syzcaller has found a way to trigger the WARN_ON_ONCE condition in check_fully_established(). The root cause is a legit fallback to TCP scenario, so replace the WARN with a plain message on a more strict condition. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mptcp: move option parsing into mptcp_incoming_options()Paolo Abeni
The mptcp_options_received structure carries several per packet flags (mp_capable, mp_join, etc.). Such fields must be cleared on each packet, even on dropped ones or packet not carrying any MPTCP options, but the current mptcp code clears them only on TCP option reset. On several races/corner cases we end-up with stray bits in incoming options, leading to WARN_ON splats. e.g.: [ 171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713 [ 171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata [ 171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95 [ 171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c [ 171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282 [ 171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e [ 171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955 [ 171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca [ 171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020 [ 171.228460] FS: 00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000 [ 171.230065] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0 [ 171.232586] Call Trace: [ 171.233109] <IRQ> [ 171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691) [ 171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832) [ 171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1)) [ 171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217) [ 171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822) [ 171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730) [ 171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009) [ 171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1)) [ 171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232) [ 171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252) [ 171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539) [ 171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135) [ 171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640) [ 171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293) [ 171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083) [ 171.282358] </IRQ> We could address the issue clearing explicitly the relevant fields in several places - tcp_parse_option, tcp_fast_parse_options, possibly others. Instead we move the MPTCP option parsing into the already existing mptcp ingress hook, so that we need to clear the fields in a single place. This allows us dropping an MPTCP hook from the TCP code and removing the quite large mptcp_options_received from the tcp_sock struct. On the flip side, the MPTCP sockets will traverse the option space twice (in tcp_parse_option() and in mptcp_incoming_options(). That looks acceptable: we already do that for syn and 3rd ack packets, plain TCP socket will benefit from it, and even MPTCP sockets will experience better code locality, reducing the jumps between TCP and MPTCP code. v1 -> v2: - rebased on current '-net' tree Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30mptcp: consolidate synack processing.Paolo Abeni
Currently the MPTCP code uses 2 hooks to process syn-ack packets, mptcp_rcv_synsent() and the sk_rx_dst_set() callback. We can drop the first, moving the relevant code into the latter, reducing the hooking into the TCP code. This is also needed by the next patch. v1 -> v2: - use local tcp sock ptr instead of casting the sk variable several times - DaveM Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30NFS: Fix a race in __nfs_list_for_each_server()Trond Myklebust
The struct nfs_server gets put on the cl_superblocks list before the server->super field has been initialised, in which case the call to nfs_sb_active() will Oops. Add a check to ensure that we skip such a list entry. Fixes: 3c9e502b59fb ("NFS: Add a helper nfs_client_for_each_server()") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-04-30x86/mm/cpa: Flush direct map alias during cpaRick Edgecombe
As an optimization, cpa_flush() was changed to optionally only flush the range in @cpa if it was small enough. However, this range does not include any direct map aliases changed in cpa_process_alias(). So small set_memory_() calls that touch that alias don't get the direct map changes flushed. This situation can happen when the virtual address taking variants are passed an address in vmalloc or modules space. In these cases, force a full TLB flush. Note this issue does not extend to cases where the set_memory_() calls are passed a direct map address, or page array, etc, as the primary target. In those cases the direct map would be flushed. Fixes: 935f5839827e ("x86/mm/cpa: Optimize cpa_flush_array() TLB invalidation") Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200424105343.GA20730@hirez.programming.kicks-ass.net
2020-04-30Merge tag 'mmc-v5.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - meson-mx-sdio: Fix support for HW busy detection - sdhci-msm: Fix support for HW busy detection - cqhci: Fix polling loop by converting to readx_poll_timeout() - sdhci-xenon: Fix annoying 1.8V regulator warning - sdhci-pci: Fix eMMC driver strength for BYT-based controllers * tag 'mmc-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Fix eMMC driver strength for BYT-based controllers mmc: sdhci-xenon: fix annoying 1.8V regulator warning mmc: sdhci-msm: Enable host capabilities pertains to R1b response mmc: cqhci: Avoid false "cqhci: CQE stuck on" by not open-coding timeout loop mmc: meson-mx-sdio: remove the broken ->card_busy() op mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY mmc: core: make mmc_interrupt_hpi() static
2020-04-30arm64: vdso: Add -fasynchronous-unwind-tables to cflagsVincenzo Frascino
On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables by default since gcc-8, so now the de facto platform ABI is to allow unwinding from async signal handlers. However on bare metal targets (aarch64-none-elf), and on old gcc, async and sync unwind tables are not enabled by default to avoid runtime memory costs. This means if linux is built with a baremetal toolchain the vdso.so may not have unwind tables which breaks the gcc platform ABI guarantee in userspace. Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o cflags to address the ABI change. Fixes: 28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation") Cc: Will Deacon <will@kernel.org> Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-04-30block: remove the bd_openers checks in blk_drop_partitionsChristoph Hellwig
When replacing the bd_super check with a bd_openers I followed a logical conclusion, which turns out to be utterly wrong. When a block device has bd_super sets it has a mount file system on it (although not every mounted file system sets bd_super), but that also implies it doesn't even have partitions to start with. So instead of trying to come up with a logical check for all openers, just remove the check entirely. Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions") Fixes: cb6b771b05c3 ("block: fix busy device checking in blk_drop_partitions again") Reported-by: Michal Koutný <mkoutny@suse.com> Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-30net/mlx5e: Fix q counters on uplink representorsRoi Dayan
Need to allocate the q counters before init_rx which needs them when creating the rq. Fixes: 8520fa57a4e9 ("net/mlx5e: Create q counters on uplink representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: Fix command entry leak in Internal Error StateMoshe Shemesh
Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: Fix forced completion access non initialized command entryMoshe Shemesh
mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a4839c1 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: DR, On creation set CQ's arm_db member to right valueErez Shitrit
In polling mode, set arm_db member to a value that will avoid CQ event recovery by the HW. Otherwise we might get event without completion function. In addition,empty completion function to was added to protect from unexpected events. Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: E-switch, Fix mutex init orderParav Pandit
In cited patch mutex is initialized after its used. Below call trace is observed. Fix the order to initialize the mutex early enough. Similarly follow mirror sequence during cleanup. kernel: DEBUG_LOCKS_WARN_ON(lock->magic != lock) kernel: WARNING: CPU: 5 PID: 45916 at kernel/locking/mutex.c:938 __mutex_lock+0x7d6/0x8a0 kernel: Call Trace: kernel: ? esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mark_held_locks+0x55/0x70 kernel: ? __slab_free+0x274/0x400 kernel: ? lockdep_hardirqs_on+0x140/0x1d0 kernel: esw_vport_tbl_get+0x3b/0x250 [mlx5_core] kernel: ? mlx5_esw_chains_create_fdb_prio+0xa57/0xc20 [mlx5_core] kernel: mlx5_esw_vport_tbl_get+0x88/0xf0 [mlx5_core] kernel: mlx5_esw_chains_create+0x2f3/0x3e0 [mlx5_core] kernel: esw_create_offloads_fdb_tables+0x11d/0x580 [mlx5_core] kernel: esw_offloads_enable+0x26d/0x540 [mlx5_core] kernel: mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] kernel: mlx5_devlink_eswitch_mode_set+0x1af/0x320 [mlx5_core] kernel: devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 Fixes: 96e326878fa5 ("net/mlx5e: Eswitch, Use per vport tables for mirroring") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: E-switch, Fix printing wrong error valueParav Pandit
When mlx5_modify_header_alloc() fails, instead of printing the error value returned, current error log prints 0. Fix by printing correct error value returned by mlx5_modify_header_alloc(). Fixes: 6724e66b90ee ("net/mlx5: E-Switch, Get reg_c1 value on miss") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30net/mlx5: E-switch, Fix error unwinding flow for steering init failureParav Pandit
Error unwinding is done incorrectly in the cited commit. When steering init fails, there is no need to perform steering cleanup. When vport error exists, error cleanup should be mirror of the setup routine, i.e. to perform steering cleanup before metadata cleanup. This avoids the call trace in accessing uninitialized objects which are skipped during steering_init() due to failure in steering_init(). Call trace: mlx5_cmd_modify_header_alloc:805:(pid 21128): too many modify header actions 1, max supported 0 E-Switch: Failed to create restore mod header BUG: kernel NULL pointer dereference, address: 00000000000000d0 [ 677.263079] mlx5_destroy_flow_group+0x13/0x80 [mlx5_core] [ 677.268921] esw_offloads_steering_cleanup+0x51/0xf0 [mlx5_core] [ 677.275281] esw_offloads_enable+0x1a5/0x800 [mlx5_core] [ 677.280949] mlx5_eswitch_enable_locked+0x155/0x860 [mlx5_core] [ 677.287227] mlx5_devlink_eswitch_mode_set+0x1af/0x320 [ 677.293741] devlink_nl_cmd_eswitch_set_doit+0x41/0xb0 [ 677.299217] genl_rcv_msg+0x1eb/0x430 Fixes: 7983a675ba65 ("net/mlx5: E-Switch, Enable chains only if regs loopback is enabled") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-04-30Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7Jens Axboe
Pull NVMe fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme: prevent double free in nvme_alloc_ns() error handling
2020-04-30fibmap: Warn and return an error in case of block > INT_MAXRitesh Harjani
We better warn the fibmap user and not return a truncated and therefore an incorrect block map address if the bmap() returned block address is greater than INT_MAX (since user supplied integer pointer). It's better to pr_warn() all user of ioctl_fibmap() and return a proper error code rather than silently letting a FS corruption happen if the user tries to fiddle around with the returned block map address. We fix this by returning an error code of -ERANGE and returning 0 as the block mapping address in case if it is > INT_MAX. Now iomap_bmap() could be called from either of these two paths. Either when a user is calling an ioctl_fibmap() interface to get the block mapping address or by some filesystem via use of bmap() internal kernel API. bmap() kernel API is well equipped with handling of u64 addresses. WARN condition in iomap_bmap_actor() was mainly added to warn all the fibmap users. But now that we have directly added this warning for all fibmap users and also made sure to return 0 as block map address in case if addr > INT_MAX. So we can now remove this logic from iomap_bmap_actor(). Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-04-30dma-buf: fix documentation build warningsRandy Dunlap
Fix documentation warnings in dma-buf.[hc]: ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach' ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach' ../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org
2020-04-30i2c: aspeed: Avoid i2c interrupt status clear race condition.ryan_chen
In AST2600 there have a slow peripheral bus between CPU and i2c controller. Therefore GIC i2c interrupt status clear have delay timing, when CPU issue write clear i2c controller interrupt status. To avoid this issue, the driver need have read after write clear at i2c ISR. Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C") Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [wsa: added Fixes tag] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-30i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handlingDan Carpenter
The problem is that we dereference "privdata->pci_dev" when we print the error messages in amd_mp2_pci_init(): dev_err(ndev_dev(privdata), "Failed to enable MP2 PCI device\n"); ^^^^^^^^^^^^^^^^^ Fixes: 529766e0a011 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2020-04-30Merge tag 'phy-for-5.7-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-linus phy: for 5.7 -rc *) Update MAINTAINER to include Vinod Koul as co-maintainer of PHY *) Fix Kconfig dependencies in seen with PHY_TEGRA_XUSB *) Re-add "qcom,sdm845-qusb2-phy" compatible in phy-qcom-qusb2.c to make it work with existing dtbs *) Move clock enable from ->poweron() to ->init() in Qualcomm usb-hs-28nm driver to initialize HW in ->init() Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.7-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: qualcomm: usb-hs-28nm: Prepare clocks in init MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainer phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string phy: tegra: Select USB_COMMON for usb_get_maximum_speed()
2020-04-30ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB IDTakashi Iwai
The USB vendor ID of NuPrime DAC-10 is not 16b0 but 16d0. Fixes: f656891c6619 ("ALSA: usb-audio: add more quirks for DSD interfaces") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200430124755.15940-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-30KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITSMarc Zyngier
KVM now expects to be able to use HW-accelerated delivery of vSGIs as soon as the guest has enabled thm. Unfortunately, we only initialize the GICv4 context if we have a virtual ITS exposed to the guest. Fix it by always initializing the GICv4.1 context if it is available on the host. Fixes: 2291ff2f2a56 ("KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor") Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-30KVM: arm64: Save/restore sp_el0 as part of __guest_enterMarc Zyngier
We currently save/restore sp_el0 in C code. This is a bit unsafe, as a lot of the C code expects 'current' to be accessible from there (and the opportunity to run kernel code in HYP is specially great with VHE). Instead, let's move the save/restore of sp_el0 to the assembly code (in __guest_enter), making sure that sp_el0 is correct very early on when we exit the guest, and is preserved as long as possible to its host value when we enter the guest. Reviewed-by: Andrew Jones <drjones@redhat.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-04-30btrfs: fix gcc-4.8 build warning for struct initializerArnd Bergmann
Some older compilers like gcc-4.8 warn about mismatched curly braces in a initializer: fs/btrfs/backref.c: In function 'is_shared_data_backref': fs/btrfs/backref.c:394:9: error: missing braces around initializer [-Werror=missing-braces] struct prelim_ref target = {0}; ^ fs/btrfs/backref.c:394:9: error: (near initialization for 'target.rbnode') [-Werror=missing-braces] Use the GNU empty initializer extension to avoid this. Fixes: ed58f2e66e84 ("btrfs: backref, don't add refs from shared block when resolving normal backref") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-04-30KVM: arm64: Delete duplicated label in invalid_vectorFangrui Song
SYM_CODE_START defines \label , so it is redundant to define \label again. A redefinition at the same place is accepted by GNU as (https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=159fbb6088f17a341bcaaac960623cab881b4981) but rejected by the clang integrated assembler. Fixes: 617a2f392c92 ("arm64: kvm: Annotate assembly using modern annoations") Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://github.com/ClangBuiltLinux/linux/issues/988 Link: https://lore.kernel.org/r/20200413231016.250737-1-maskray@google.com
2020-04-30USB: uas: add quirk for LaCie 2Big QuadraOliver Neukum
This device needs US_FL_NO_REPORT_OPCODES to avoid going through prolonged error handling on enumeration. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: Julian Groß <julian.g@posteo.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200429155218.7308-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-30phy: qualcomm: usb-hs-28nm: Prepare clocks in initBjorn Andersson
The AHB clock must be on for qcom_snps_hsphy_init() to be able to write the initialization sequence to the hardware, so move the clock enablement to phy init and exit. Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-30MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainerKishon Vijay Abraham I
Add Vinod Koul as Generic PHY Subsystem co-maintainer and move the linux-phy to a shared repository. Cc: Vinod Koul <vkoul@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-30ALSA: opti9xx: shut up gcc-10 range warningArnd Bergmann
gcc-10 points out a few instances of suspicious integer arithmetic leading to value truncation: sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure': sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 322 | (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask' 351 | snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c: In function 'snd_miro_configure': sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow] 873 | (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~ sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask' 1010 | snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff); | ^~~~~~~~~~~~~~~~~~~ These are all harmless here as only the low 8 bit are passed down anyway. Change the macros to inline functions to make the code more readable and also avoid the warning. Strictly speaking those functions also need locking to make the read/write pair atomic, but it seems unlikely that anyone would still run into that issue. Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-04-30crypto: arch/nhpoly1305 - process in explicit 4k chunksJason A. Donenfeld
Rather than chunking via PAGE_SIZE, this commit changes the arch implementations to chunk in explicit 4k parts, so that calculations on maximum acceptable latency don't suddenly become invalid on platforms where PAGE_SIZE isn't 4k, such as arm64. Fixes: 0f961f9f670e ("crypto: x86/nhpoly1305 - add AVX2 accelerated NHPoly1305") Fixes: 012c82388c03 ("crypto: x86/nhpoly1305 - add SSE2 accelerated NHPoly1305") Fixes: a00fa0c88774 ("crypto: arm64/nhpoly1305 - add NEON-accelerated NHPoly1305") Fixes: 16aae3595a9d ("crypto: arm/nhpoly1305 - add NEON-accelerated NHPoly1305") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-30crypto: arch/lib - limit simd usage to 4k chunksJason A. Donenfeld
The initial Zinc patchset, after some mailing list discussion, contained code to ensure that kernel_fpu_enable would not be kept on for more than a 4k chunk, since it disables preemption. The choice of 4k isn't totally scientific, but it's not a bad guess either, and it's what's used in both the x86 poly1305, blake2s, and nhpoly1305 code already (in the form of PAGE_SIZE, which this commit corrects to be explicitly 4k for the former two). Ard did some back of the envelope calculations and found that at 5 cycles/byte (overestimate) on a 1ghz processor (pretty slow), 4k means we have a maximum preemption disabling of 20us, which Sebastian confirmed was probably a good limit. Unfortunately the chunking appears to have been left out of the final patchset that added the glue code. So, this commit adds it back in. Fixes: 84e03fa39fbe ("crypto: x86/chacha - expose SIMD ChaCha routine as library function") Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function") Fixes: a44a3430d71b ("crypto: arm/chacha - expose ARM ChaCha routine as library function") Fixes: d7d7b8535662 ("crypto: x86/poly1305 - wire up faster implementations for kernel") Fixes: f569ca164751 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: a6b803b3ddc7 ("crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation") Fixes: ed0356eda153 ("crypto: blake2s - x86_64 SIMD implementation") Cc: Eric Biggers <ebiggers@google.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-04-29Merge branch 'wireguard-fixes'David S. Miller
Jason A. Donenfeld says: ==================== wireguard fixes for 5.7-rc4 This series contains two fixes and a cleanup for wireguard: 1) Removal of a spurious newline, from Sultan Alsawaf. 2) Fix for a memory leak in an error path, in which memory allocated prior to the error wasn't freed, reported by Sultan Alsawaf. 3) Fix to ECN support to use RFC6040 properly like all the other tunnel drivers, from Toke Høiland-Jørgensen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29wireguard: receive: use tunnel helpers for decapsulating ECN markingsToke Høiland-Jørgensen
WireGuard currently only propagates ECN markings on tunnel decap according to the old RFC3168 specification. However, the spec has since been updated in RFC6040 to recommend slightly different decapsulation semantics. This was implemented in the kernel as a set of common helpers for ECN decapsulation, so let's just switch over WireGuard to using those, so it can benefit from this enhancement and any future tweaks. We do not drop packets with invalid ECN marking combinations, because WireGuard is frequently used to work around broken ISPs, which could be doing that. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Rodney W. Grimes <ietf@gndrsh.dnsmgr.net> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29wireguard: queueing: cleanup ptr_ring in error path of packet_queue_initJason A. Donenfeld
Prior, if the alloc_percpu of packet_percpu_multicore_worker_alloc failed, the previously allocated ptr_ring wouldn't be freed. This commit adds the missing call to ptr_ring_cleanup in the error case. Reported-by: Sultan Alsawaf <sultan@kerneltoast.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29wireguard: send: remove errant newline from packet_encrypt_workerSultan Alsawaf
This commit removes a useless newline at the end of a scope, which doesn't add anything in the way of organization or readability. Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29platform/chrome: cros_ec_sensorhub: Allocate sensorhub resource before ↵Gwendal Grignou
claiming sensors Allocate callbacks array before enumerating the sensors: The probe routine for these sensors (for instance cros_ec_sensors_probe) can be called within the sensorhub probe routine (cros_ec_sensors_probe()) Fixes: 145d59baff594 ("platform/chrome: cros_ec_sensorhub: Add FIFO support") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reported-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-04-29HID: mcp2221: add gpiolib dependencyArnd Bergmann
Without gpiolib, this driver fails to link: arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe': hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data' arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get': hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data' Fixes: 328de1c519c5 ("HID: mcp2221: add GPIO functionality support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rishi Gupta <gupt21@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: i2c-hid: reset Synaptics SYNA2393 on resumeDaniel Playfair Cal
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: wacom: Report 2nd-gen Intuos Pro S center button status over BTJason Gerecke
The state of the center button was not reported to userspace for the 2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling code not being updated to support its reduced number of buttons. This patch uses the actual number of buttons present on the tablet to assemble a button state bitmap. Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112 Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29mptcp: replace mptcp_disconnect with a stubFlorian Westphal
Paolo points out that mptcp_disconnect is bogus: "lock_sock(sk); looks suspicious (lock should be already held by the caller) And call to: tcp_disconnect(sk, flags); too, sk is not a tcp socket". ->disconnect() gets called from e.g. inet_stream_connect when one tries to disassociate a connected socket again (to re-connect without closing the socket first). MPTCP however uses mptcp_stream_connect, not inet_stream_connect, for the mptcp-socket connect call. inet_stream_connect only gets called indirectly, for the tcp socket, so any ->disconnect() calls end up calling tcp_disconnect for that tcp subflow sk. This also explains why syzkaller has not yet reported a problem here. So for now replace this with a stub that doesn't do anything. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/14 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29netfilter: nf_osf: avoid passing pointer to local varArnd Bergmann
gcc-10 points out that a code path exists where a pointer to a stack variable may be passed back to the caller: net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init': cc1: warning: function may return address of local variable [-Wreturn-local-addr] net/netfilter/nfnetlink_osf.c:171:16: note: declared here 171 | struct tcphdr _tcph; | ^~~~~ I am not sure whether this can happen in practice, but moving the variable declaration into the callers avoids the problem. Fixes: 31a9c29210e2 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-04-29net: dsa: mv88e6xxx: remove duplicate assignment of struct membersJason Yan
These struct members named 'phylink_validate' was assigned twice: static const struct mv88e6xxx_ops mv88e6190_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6190x_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390x_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6191_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; static const struct mv88e6xxx_ops mv88e6290_ops = { ...... .phylink_validate = mv88e6390_phylink_validate, ...... .phylink_validate = mv88e6390_phylink_validate, }; Remove all the first one and leave the second one which are been used in fact. Be aware that for 'mv88e6190x_ops' the assignment functions is different while the others are all the same. This fixes the following coccicheck warning: drivers/net/dsa/mv88e6xxx/chip.c:3911:48-49: phylink_validate: first occurrence line 3965, second occurrence line 3967 drivers/net/dsa/mv88e6xxx/chip.c:3970:49-50: phylink_validate: first occurrence line 4024, second occurrence line 4026 drivers/net/dsa/mv88e6xxx/chip.c:4029:48-49: phylink_validate: first occurrence line 4082, second occurrence line 4085 drivers/net/dsa/mv88e6xxx/chip.c:4184:48-49: phylink_validate: first occurrence line 4238, second occurrence line 4242 Fixes: 4262c38dc42e ("net: dsa: mv88e6xxx: Add SERDES stats counters to all 6390 family members") Signed-off-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-29regulator: Revert "Use driver_deferred_probe_timeout for ↵John Stultz
regulator_init_complete_work" This reverts commit dca0b44957e5 ("regulator: Use driver_deferred_probe_timeout for regulator_init_complete_work"), as we ended up reverting the default deferred_probe_timeout value back to zero, to preserve behavior with 5.6 we need to decouple the regulator timeout which was previously 30 seconds. This avoids breaking some systems that depend on the regulator timeout but don't require the deferred probe timeout. Cc: linux-pm@vger.kernel.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Kevin Hilman <khilman@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Rob Herring <robh@kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Suggested-by: Mark Brown <broonie@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200429172349.55979-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29Merge tag 'riscv-for-linus-5.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes. Specifically: - fix linker argument to allow linking with lld - build fix for configurations without a frame pointer - a handful of build fixes related the SBI 0.1 vs 0.2 split - remove STRICT_KERNEL_RWX for !MMU, which isn't useful" * tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU riscv: sbi: Fix undefined reference to sbi_shutdown tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export riscv: fix vdso build with lld RISC-V: stacktrace: Declare sp_in_global outside ifdef
generated by cgit (git 2.34.1) at 2025-09-12 23:10:58 +0000