summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-12-12dt/device: Fix auxdata matching to handle entries without a name overrideGrant Likely
There is no requirement to override name entries in auxdata. Fix the entry matching to use .compatible instead of .name to find the end of the list. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-12ath9k: fix max phy rate at rate control initRajkumar Manoharan
The stations always chooses 1Mbps for all trasmitting frames, whenever the AP is configured to lock the supported rates. As the max phy rate is always set with the 4th from highest phy rate, this assumption might be wrong if we have less than that. Fix that. Cc: stable@kernel.org Cc: Paul Stewart <pstew@google.com> Reported-by: Ajay Gummalla <agummalla@google.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-12nfc: signedness bug in __nci_request()Dan Carpenter
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS if interrupted so completion_rc needs to be signed. The current code probably returns -ETIMEDOUT if we hit this situation, but after this patch is applied it will return -ERESTARTSYS. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-12iwlwifi: do not set the sequence control bit is not neededWey-Yi Guy
Check the IEEE80211_TX_CTL_ASSIGN_SEQ flag from mac80211, then decide how to set the TX_CMD_FLG_SEQ_CTL_MSK bit. Setting the wrong bit in BAR frame whill make the firmware to increment the sequence number which is incorrect and cause unknown behavior. CC: stable@vger.kernel.org #3.0+ Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-12ARM: OMAP: mcbsp: Fix possible memory corruptionJarkko Nikula
Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-12Revert "[media] af9015: limit I2C access to keep FW happy"Mauro Carvalho Chehab
This reverts commit ff83bd82cb343d37b5ab8e402aaad9ef33d03f1e. As requested by Antti: From a talk with him at #linuxtv irc, he strong feeling that some apps like MythTV will do a lot a lot of I2C I/O and now it adds locks, with utimatelly means more delays. This could cause bad effects. There is a new patch for 3.3 that re-writes af9013 in order to limit I2C I/O. and thus those patches could be nice to have together because those user who has has problems are most likely MythTV users. So, let's revert this commit for now. Requested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-12Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid"Keith Packard
This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c7106280a305e1ff2a3a8a4dfce141469fb039. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Huang Ying <huang.ying.caritas@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-12crush: fix mapping calculation when force argument doesn't existSage Weil
If the force argument isn't valid, we should continue calculating a mapping as if it weren't specified. Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-12hwmon: (jz4740) Staticise jz4740_hwmon_driverAxel Lin
It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-12-12hwmon: (jz4740) fix signedness bugAxel Lin
wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@kernel.org (3.0+) Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-12-12ext4: Fix crash due to getting bogus eh_depth value on big-endian systemsPaul Mackerras
Commit 1939dd84b3 ("ext4: cleanup ext4_ext_grow_indepth code") added a reference to ext4_extent_header.eh_depth, but forget to pass the value read through le16_to_cpu. The result is a crash on big-endian machines, such as this crash on a POWER7 server: attempt to access beyond end of device sda8: rw=0, want=776392648163376, limit=168558560 Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6bcb Faulting instruction address: 0xc0000000001f5f38 cpu 0x14: Vector: 300 (Data Access) at [c000001bd1aaecf0] pc: c0000000001f5f38: .__brelse+0x18/0x60 lr: c0000000002e07a4: .ext4_ext_drop_refs+0x44/0x80 sp: c000001bd1aaef70 msr: 9000000000009032 dar: 6b6b6b6b6b6b6bcb dsisr: 40000000 current = 0xc000001bd15b8010 paca = 0xc00000000ffe4600 pid = 19911, comm = flush-8:0 enter ? for help [c000001bd1aaeff0] c0000000002e07a4 .ext4_ext_drop_refs+0x44/0x80 [c000001bd1aaf090] c0000000002e0c58 .ext4_ext_find_extent+0x408/0x4c0 [c000001bd1aaf180] c0000000002e145c .ext4_ext_insert_extent+0x2bc/0x14c0 [c000001bd1aaf2c0] c0000000002e3fb8 .ext4_ext_map_blocks+0x628/0x1710 [c000001bd1aaf420] c0000000002b2974 .ext4_map_blocks+0x224/0x310 [c000001bd1aaf4d0] c0000000002b7f2c .mpage_da_map_and_submit+0xbc/0x490 [c000001bd1aaf5a0] c0000000002b8688 .write_cache_pages_da+0x2c8/0x430 [c000001bd1aaf720] c0000000002b8b28 .ext4_da_writepages+0x338/0x670 [c000001bd1aaf8d0] c000000000157280 .do_writepages+0x40/0x90 [c000001bd1aaf940] c0000000001ea830 .writeback_single_inode+0xe0/0x530 [c000001bd1aafa00] c0000000001eb680 .writeback_sb_inodes+0x210/0x300 [c000001bd1aafb20] c0000000001ebc84 .__writeback_inodes_wb+0xd4/0x140 [c000001bd1aafbe0] c0000000001ebfec .wb_writeback+0x2fc/0x3e0 [c000001bd1aafce0] c0000000001ed770 .wb_do_writeback+0x2f0/0x300 [c000001bd1aafdf0] c0000000001ed848 .bdi_writeback_thread+0xc8/0x340 [c000001bd1aafed0] c0000000000c5494 .kthread+0xb4/0xc0 [c000001bd1aaff90] c000000000021f48 .kernel_thread+0x54/0x70 This is due to getting ext_depth(inode) == 0x101 and therefore running off the end of the path array in ext4_ext_drop_refs into following unallocated structures. This fixes it by adding the necessary le16_to_cpu. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-12-12ext4: fix ext4_end_io_dio() racing against fsync()Theodore Ts'o
We need to make sure iocb->private is cleared *before* we put the io_end structure on i_completed_io_list. Otherwise fsync() could potentially run on another CPU and free the iocb structure out from under us. Reported-by: Kent Overstreet <koverstreet@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2011-12-12block/swim3: Locking fixesBenjamin Herrenschmidt
The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-12usb: renesas_usbhs: add hcd->has_tt for low/full speedKuninori Morimoto
Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: renesas_usbhs: typofix: irq_dtch control DTCHEKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: gadget: storage: release superspeed descriptors.Yu Xu
Release superspeed mass storage descriptors memory when the function is unbind. Signed-off-by: Yu Xu <yuxu@marvell.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12[SCSI] qla2xxx: Update version number to 8.03.07.12-k.Chad Dupuis
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Submit all chained IOCBs for passthrough commands on request ↵Giridhar Malavali
queue 0. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Correct fc_host port_state display.Saurav Kashyap
[jejb: checkpatch fixes] Add more fine grain parsing of vha->loop_state to export a more accurate fc_host port_state. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Disable generating pause frames when firmware hang detected ↵Giridhar Malavali
for ISP82xx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Clear mailbox busy flag during premature mailbox completion ↵Giridhar Malavali
for ISP82xx. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based deviceDavid Henningsson
For the Asus 1101HA, reporting position by reading the DMA position buffer map seems unstable and often wrong. The reporter says that position_fix=LPIB works much better (although not 100%, but this is probably due to other issues). The controller chip is an Intel Poulsbo 8086:811b (rev 07) controller, and complete alsa-info is available here: https://launchpadlibrarian.net/86691768/alsa-info.txt.1TNwyE5Ea7 Cc: stable@kernel.org (3.0+) BugLink: http://bugs.launchpad.net/bugs/825709 Tested-by: Stefano Lodi Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-12[SCSI] qla2xxx: Encapsulate prematurely completing mailbox commands during ↵Chad Dupuis
ISP82xx firmware hang. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Display IPE error message for ISP82xx.Chad Dupuis
[jejb: fixup checkpatch error] Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Return the correct value for a mailbox command if 82xx is in ↵Andrew Vasquez
reset recovery. We need to return QLA_FUNCTION_TIMEOUT immediately otherwise we mess up the mailbox command state machine. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Enable Minidump by default with default capture mask 0x1f.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Stop unconditional completion of mailbox commands issued in ↵Giridhar Malavali
interrupt mode during firmware hang. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Revert back the request queue mapping to request queue 0.Giridhar Malavali
If there is an error creating multiple response queues then we need to revert the request queue mapping back to request queue 0. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Don't call alloc_fw_dump for ISP82XX.Saurav Kashyap
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Check for SCSI status on underruns.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] qla2xxx: Remove qla2x00_wait_for_loop_ready function.Saurav Kashyap
This function can wait for 5min under certain scenarios. One of them is when the port is down from switch and bus reset is issued. The bus reset used to wait for 5 minutes for the loop and upper layer callers used to hang and give stack trace because of getting stuck for 120 sec. It is legacy code that was used when the driver used to do queuing of the commands. Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12[SCSI] mpt2sas: _scsih_smart_predicted_fault uses GFP_KERNEL in interrupt ↵Anton Blanchard
context _scsih_smart_predicted_fault is called in an interrupt and therefore must allocate memory using GFP_ATOMIC. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-12Input: synaptics - fix touchpad not working after S2R on Vostro V13Dmitry Torokhov
Synaptics touchpads on several Dell laptops, particularly Vostro V13 systems, may not respond properly to PS/2 commands and queries immediately after resuming from suspend to RAM. This leads to unresponsive touchpad after suspend/resume cycle. Adding a 1-second delay after resetting the device allows touchpad to finish initializing (calibrating?) and start reacting properly. Reported-by: Daniel Manrique <daniel.manrique@canonical.com> Tested-by: Daniel Manrique <daniel.manrique@canonical.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: cma3000_d0x - fix signedness bug in cma3000_thread_irq()Xi Wang
The error check (intr_status < 0) didn't work because intr_status is a u8. Change its type to signed int. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12Input: wacom - add product id used by Samsung Slate 7Chris Bagwell
New product ID reported by Harvey Braun on linuxwacom mailing list and also tested this patch with new hardware. Signed-off-by: Chris Bagwell <chris@cnpbagwell.com> Acked-by: Ping Cheng <pinglinux@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card failsAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-12ASoC: WM8958: correctly show firmware magic on mismatchJonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-11ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlierArnaud Patard
arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: stable@kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-11[media] s5p-fimc: Fix camera input configuration in subdev operationsSylwester Nawrocki
When using only subdev user-space operations the camera interface input was not configured properly. Fix this by updating the corresponding data structure in set_fmt operation. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] m5mols: Fix logic in sanity checkThomas Jarosch
Detected by "cppcheck". Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] ati_remote: switch to single-byte scancodesAnssi Hannula
The ati_remote driver currently uses 2-byte scancodes. However, one of those bytes is actually a checksum and therefore shouldn't be considered as part of the scancode. Fix the driver to only use the actual data byte as a scancode and to check the checksum itself. Update the bundled keymaps accordingly. Since ati_remote was only migrated to the rc subsystem for 3.2, the previous scancodes weren't emitted on any stable kernel. Reported-by: George Spelvin <linux@horizon.com> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] V4L: mt9m111: fix uninitialised mutexGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] V4L: omap1_camera: fix missing <linux/module.h> includeJanusz Krzysztofik
Otherwise compilation breaks with: ... after apparently no longer included recursively from other header files. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] V4L: mt9t112: use after free in mt9t112_probe()Dan Carpenter
priv gets dereferenced in mt9t112_set_params() so we should return before calling that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] V4L: soc-camera: fix compiler warnings on 64-bit platformsGuennadi Liakhovetski
On 64-bit platforms assigning a pointer to a 32-bit variable causes a compiler warning and cannot actually work. Soc-camera currently doesn't support any 64-bit systems, but such platforms can be added in the and in any case compiler warnings should be avoided. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] s5p_mfc_enc: fix s/H264/H263/ typoPeter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Aked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] omap_vout: Fix compile error in 3.1Gary Thomas
This patch is against the mainline v3.1 release (c3b92c8) and fixes a compile error when building for OMAP3+DSS+VOUT Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Gary Thomas <gary@mlbassoc.com> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] au0828: add missing models 72101, 72201 & 72261 to the model matrixMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] au0828: add missing USB ID 2040:7213Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-11[media] au0828: add missing USB ID 2040:7260Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 13:19:31 +0000