summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-15be2net: add dma_mapping_error() check for dma_map_page()Ivan Vecera
The driver does not check value returned by dma_map_page. The patch fixes this. v2: Removed the bugfix for non-bug ;-) (thanks Sathya) Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Sathya Perla <Sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15bnx2x: Don't release PCI bars on shutdownYuval Mintz
The bnx2x driver in its pci shutdown() callback releases its pci bars (in the same manner it does during its pci remove() callback). During a system reboot while VFs are enabled, its possible for the VF's remove to be called (as a result of pci_disable_sriov()) after its shutdown callback has already finished running; This will cause a paging request fault as the VF tries to access the pci bar which it has previously released, crashing the system. This patch further differentiates the shutdown and remove callbacks, preventing the pci release procedures from being called during shutdown. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15net,via-rhine: Fix tx_timeout handlingRichard Weinberger
rhine_reset_task() misses to disable the tx scheduler upon reset, this can lead to a crash if work is still scheduled while we're resetting the tx queue. Fixes: [ 93.591707] BUG: unable to handle kernel NULL pointer dereference at 0000004c [ 93.595514] IP: [<c119d10d>] rhine_napipoll+0x491/0x6 Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ASoC: tlv320aic32x4: Fix regmap range_minMarkus Pargmann
range_min is the lowest address in the virtual register range. This is the first register with address 0, not the first register of page 1. Currently all writes to page 1 are mapped to page 0, so the codec fails to operate. Fixes: 4d208ca429ad (ASoC: tlv320aic32x4: Convert to direct regmap API usage) Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org (v3.13 if the fix misses -final)
2014-01-15ASoC: core: Return -ENOTSUPP from set_sysclk() if no operation providedMark Brown
Make it easier for generic code to work with set_sysclk() by distinguishing between the operation not being supported and an error as is done for other operations like set_dai_fmt() Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-15batman-adv: fix batman-adv header overhead calculationMarek Lindner
Batman-adv prepends a full ethernet header in addition to its own header. This has to be reflected in the MTU calculation, especially since the value is used to set dev->hard_header_len. Introduced by 411d6ed93a5d0601980d3e5ce75de07c98e3a7de ("batman-adv: consider network coding overhead when calculating required mtu") Reported-by: cmsv <cmsv@wirelesspt.net> Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-15x86, intel-mid: Remove deprecated X86_MDFLD and X86_WANT_INTEL_MID configsDavid Cohen
We want to support all Intel MID (Mobile Internet Device) platforms with a single config selection. This patch removes deprecated CONFIG_X86_MDFLD and X86_WANT_INTEL_MID options in favor of having CONFIG_X86_INTEL_MID only. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1387244246-20714-1-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-15x86, intel-mid: Add Merrifield platform supportDavid Cohen
This code was partially based on Mark Brown's previous work. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1387224459-25746-4-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: Fei Yang <fei.yang@intel.com> Cc: Mark F. Brown <mark.f.brown@intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-15x86, intel-mid: Add Clovertrail platform supportKuppuswamy Sathyanarayanan
This patch adds Clovertrail support on intel-mid and makes it more flexible to support other SoCs. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1387224459-25746-3-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-15x86, intel-mid: Move Medfield code out of intel-mid.c core fileDavid Cohen
In order make the driver more portable and support other Intel MID (Mobile Internet Device) platforms we need to move Medfield code from intel-mid.c core to its own mfld.c file. This patch contains no functional changes. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1387224459-25746-2-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-15x86, apic: Make disabled_cpu_apicid static read_mostly, fix typosH. Peter Anvin
Make disabled_cpu_apicid static and read_mostly, and fix a couple of typos. Reported-by: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/20140115182511.GA22737@gmail.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
2014-01-15tools lib traceevent: fix pointer-integer size mismatchMark Rutland
The scsi and cfg80211 plugins cast between unsigned long long and pointers, which is problematic for architectures where unsigned long long is wider than the native pointer size: linux/tools/lib/traceevent/plugin_scsi.c: In function ‘process_scsi_trace_parse_cdb’: linux/tools/lib/traceevent/plugin_scsi.c:408:26: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] scsi_trace_parse_cdb(s, (unsigned char *) args[1], args[2]); linux/tools/lib/traceevent/plugin_cfg80211.c: In function ‘process___le16_to_cpup’: linux/tools/lib/traceevent/plugin_cfg80211.c:11:18: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] uint16_t *val = (uint16_t *) args[0]; This patch adds an intermediate cast to unsigned long, silencing the warning. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1389782648-4417-3-git-send-email-mark.rutland@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15perf hists: Convert hist entry functions to use struct he_statNamhyung Kim
The hist_entry__add_cpumode_period() and hist_entry__decay() functions are dealing with hist_entry's stat fields only. Make them he_stat methods then. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arun Sharma <asharma@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1389677157-30513-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15perf tools: Factor out sample__resolve_callchain()Namhyung Kim
The report__resolve_callchain() can be shared with perf top code as it doesn't really depend on the perf report code. Factor it out as sample__resolve_callchain(). The same goes to the hist_entry__append_ callchain() too. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arun Sharma <asharma@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1389677157-30513-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15perf tools: Remove symbol_conf.use_callchain checkNamhyung Kim
The machine__resolve_callchain() is called only if symbol_conf. use_callchain is set so no need to check it again. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1389677157-30513-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15perf: tools: Fix cross buildingMark Rutland
Currently the feature-checks Makefile does not inherit $(CC), and calls cc rather than $(CROSS_COMPILE)gcc. Thus the feature checks invoke the native toolchain rather than the cross toolchain, and can identify features as available when they are not. This can break the build. Additionally the native pkg-config is always called as opposed to $(CROSS_COMPILE)pkg-config, so the wrong flags and paths may be passed to the cross compiler. This patch passes CROSS_COMPILE down to the feature-checks Makefile, and forces its use. Additionally pkg-config is replaced with $(CROSS_COMPILE)pkg-config via a new $(PKG_CONFIG) variable. This patch has been build tested on x86_64 and arm. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1389782648-4417-4-git-send-email-mark.rutland@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15tools lib traceevent: Make plugin unload function receive peventNamhyung Kim
The PEVENT_PLUGIN_UNLOADER function might need some cleanup using pevent like unregister some handlers. So pass pevent as argument. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1389750340-15965-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15tools lib traceevent: Get rid of die() finally!!Namhyung Kim
Now all of its users were gone. :) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1389750340-15965-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15tools lib traceevent: Get rid of malloc_or_die() in trace_seq_init()Namhyung Kim
Use plain malloc() and check its return value. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1389750340-15965-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15tools lib traceevent: Check return value of realloc()Namhyung Kim
If realloc() fails, it'll leak the buffer. Also increate buffer size only if the allocation succeeded. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1389750340-15965-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15tools lib traceevent: Add state member to struct trace_seqNamhyung Kim
The trace_seq->state is for tracking errors during the use of trace_seq APIs and getting rid of die() in it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/87fvopalbb.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15perf tools: Fix build error due to zfree() castNamhyung Kim
It failed to build perf on my ubuntu 10.04 box (gcc 4.4.3): CC util/strlist.o cc1: warnings being treated as errors util/strlist.c: In function ‘str_node__delete’: util/strlist.c:42: error: dereferencing type-punned pointer will break strict-aliasing rules util/strlist.c:42: error: dereferencing type-punned pointer will break strict-aliasing rules CC util/strfilter.o make: *** [util/strlist.o] Error 1 CC util/srcline.o cc1: warnings being treated as errors util/srcline.c: In function ‘addr2line_init’: util/srcline.c:132: error: dereferencing type-punned pointer will break strict-aliasing rules util/srcline.c:132: error: dereferencing type-punned pointer will break strict-aliasing rules util/srcline.c: In function ‘addr2line_cleanup’: util/srcline.c:143: error: dereferencing type-punned pointer will break strict-aliasing rules util/srcline.c:143: error: dereferencing type-punned pointer will break strict-aliasing rules make: *** [util/srcline.o] Error 1 It seems it only allows to remove 'const' qualifier. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389276479-9047-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-01-15Merge branch 'pci/reset' into nextBjorn Helgaas
* pci/reset: vfio-pci: Use pci "try" reset interface PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
2014-01-15Merge branch 'pci/locking' into nextBjorn Helgaas
* pci/locking: PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove()
2014-01-15Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Never treat a VF as a multifunction device
2014-01-15vfio-pci: Use pci "try" reset interfaceAlex Williamson
PCI resets will attempt to take the device_lock for any device to be reset. This is a problem if that lock is already held, for instance in the device remove path. It's not sufficient to simply kill the user process or skip the reset if called after .remove as a race could result in the same deadlock. Instead, we handle all resets as "best effort" using the PCI "try" reset interfaces. This prevents the user from being able to induce a deadlock by triggering a reset. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-15PCI: Check parent kobject in pci_destroy_dev()Rafael J. Wysocki
If pci_stop_and_remove_bus_device() is run concurrently for a device and its parent bridge via remove_callback(), both code paths attempt to acquire pci_rescan_remove_lock. If the child device removal acquires it first, there will be no problems. However, if the parent bridge removal acquires it first, it will eventually execute pci_destroy_dev() for the child device, but that device object will not be freed yet due to the reference held by the concurrent child removal. Consequently, both pci_stop_bus_device() and pci_remove_bus_device() will be executed for that device unnecessarily and pci_destroy_dev() will see a corrupted list head in that object. Moreover, an excess put_device() will be executed for that device in that case which may lead to a use-after-free in the final kobject_put() done by sysfs_schedule_callback_work(). To avoid that problem, make pci_destroy_dev() check if the device's parent kobject is NULL, which only happens after device_del() has already run for it. Make pci_destroy_dev() return immediately whithout doing anything in that case. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-15xen/pcifront: Use global PCI rescan-remove lockingRafael J. Wysocki
Multiple race conditions are possible between the Xen pcifront device addition and removal and the generic PCI device addition and removal that can be triggered via sysfs. To avoid those race conditions make the Xen pcifront code use global PCI rescan-remove locking. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-15powerpc/eeh: Use global PCI rescan-remove lockingRafael J. Wysocki
Race conditions are theoretically possible between the PCI device addition and removal in the PPC64 PCI error recovery driver and the generic PCI bus rescan and device removal that can be triggered via sysfs. To avoid those race conditions make PPC64 PCI error recovery driver use global PCI rescan-remove locking around PCI device addition and removal. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-01-15x86, apic, kexec: Add disable_cpu_apicid kernel parameterHATAYAMA Daisuke
Add disable_cpu_apicid kernel parameter. To use this kernel parameter, specify an initial APIC ID of the corresponding CPU you want to disable. This is mostly used for the kdump 2nd kernel to disable BSP to wake up multiple CPUs without causing system reset or hang due to sending INIT from AP to BSP. Kdump users first figure out initial APIC ID of the BSP, CPU0 in the 1st kernel, for example from /proc/cpuinfo and then set up this kernel parameter for the 2nd kernel using the obtained APIC ID. However, doing this procedure at each boot time manually is awkward, which should be automatically done by user-land service scripts, for example, kexec-tools on fedora/RHEL distributions. This design is more flexible than disabling BSP in kernel boot time automatically in that in kernel boot time we have no choice but referring to ACPI/MP table to obtain initial APIC ID for BSP, meaning that the method is not applicable to the systems without such BIOS tables. One assumption behind this design is that users get initial APIC ID of the BSP in still healthy state and so BSP is uniquely kept in CPU0. Thus, through the kernel parameter, only one initial APIC ID can be specified. In a comparison with disabled_cpu_apicid, we use read_apic_id(), not boot_cpu_physical_apicid, because on some platforms, the variable is modified to the apicid reported as BSP through MP table and this function is executed with the temporarily modified boot_cpu_physical_apicid. As a result, disabled_cpu_apicid kernel parameter doesn't work well for apicids of APs. Fixing the wrong handling of boot_cpu_physical_apicid requires some reviews and tests beyond some platforms and it could take some time. The fix here is a kind of workaround to focus on the main topic of this patch. Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Link: http://lkml.kernel.org/r/20140115064458.1545.38775.stgit@localhost6.localdomain6 Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-01-15pinctrl: st: Fix a typo in probeSrinivas Kandagatla
Probe function had commas instead of semi-colons on some of the lines. This patch just fixes those lines. No functional chagnes done in this patch. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: Fix some typos and grammar issues in the documentationLaszlo Papp
I had been trying to learn a bit more about the pinctrl subsystem, and I realized several typos and grammar issues while going through the documentation. I have probably not caught all the possible issues, but this change is addressing several places for improvement. Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: sirf: lock IRQs when starting themLinus Walleij
This uses the new API for tagging GPIO lines as in use by IRQs. This enforces a few semantic checks on how the underlying GPIO line is used. Also assign the gpio_chip.dev pointer to be used for error messages. Cc: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15GFS2: Fix kbuild test robot reported warningSteven Whitehouse
Well I don't get the same warning locally as the kbuild robot, but I guess this should fix the problem, anyway. Here is the warning: head: 2d9e72303d538024627fb1fe2cbde48aec12acc0 commit: ee2411a8db49a21bc55dc124e1b434ba194c8903 [19/20] GFS2: Clean up quota slot allocation config: make ARCH=powerpc allmodconfig All error/warnings: fs/gfs2/quota.c: In function 'gfs2_quota_init': >> fs/gfs2/quota.c:1246:3: error: implicit declaration of function '__vmalloc' [-Werror=implicit-function-declaration] sdp->sd_quota_bitmap = __vmalloc(bm_size, GFP_NOFS, PAGE_KERNEL); ^ >> fs/gfs2/quota.c:1246:24: warning: assignment makes pointer from integer without a cast [enabled by default] sdp->sd_quota_bitmap = __vmalloc(bm_size, GFP_NOFS, PAGE_KERNEL); ^ fs/gfs2/quota.c: In function 'gfs2_quota_cleanup': >> fs/gfs2/quota.c:1361:4: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] vfree(sdp->sd_quota_bitmap); Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-15ARM: S5P[v210|c100|64x0]: Fix build errorSachin Kamat
gpio-samsung.h header file introduced by commit 93177be0910c ("ARM: S3C[24|64]xx: move includes back under <mach/> scope") is required only by S3C[24|64]xx machines. Include them conditionally to avoid the following build errors for other machine configurations. drivers/gpio/gpio-samsung.c:35:31: fatal error: mach/gpio-samsung.h: No such file or directory arch/arm/plat-samsung/pm-gpio.c:22:31: fatal error: mach/gpio-samsung.h: No such file or directory Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15ARM: mvebu: update the SATA compatible string for Armada 370/XPSimon Guinot
This patch updates the Armada 370/XP SATA node with the new compatible string "marvell,armada-370-sata". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Lior Amsalem <alior@marvell.com> Cc: stable@vger.kernel.org # v3.6+ Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-15ata: sata_mv: fix disk hotplug for Armada 370/XP SoCsLior Amsalem
On Armada 370/XP SoCs, once a disk is removed from a SATA port, then the re-plug events are not detected by the sata_mv driver. This patch fixes the issue by updating the PHY speed in the LP_PHY_CTL register (0x58) according to the SControl speed. Note that this fix is only applied if the compatible string "marvell,armada-370-sata" is found in the SATA DT node. Fixes: 9ae6f740b49f ("arm: mach-mvebu: add support for Armada 370 and Armada XP with DT") Signed-off-by: Lior Amsalem <alior@marvell.com> Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: stable@vger.kernel.org # v3.6+ Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-15ata: sata_mv: introduce compatible string "marvell, armada-370-sata"Simon Guinot
The sata_mv driver supports the SATA IP found in several Marvell SoCs. As some new SATA registers have been introduced with the Armada 370/XP SoCs, a way to identify them is needed. This patch introduces a new compatible string for the SATA IP found in Armada 370/XP SoCs. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Lior Amsalem <alior@marvell.com> Cc: stable@vger.kernel.org # v3.6+ Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-15kvm: x86: fix apic_base enable checkAndrew Jones
Commit e66d2ae7c67bd moved the assignment vcpu->arch.apic_base = value above a condition with (vcpu->arch.apic_base ^ value), causing that check to always fail. Use old_value, vcpu->arch.apic_base's old value, in the condition instead. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-15x86, cpu, amd: Fix a shadowed variable situationBorislav Petkov
Having u32 and struct cpuinfo_x86 * by the same name is not very smart, although it was ok in this case due to the limited scope of u32 c and it being used only once in there. Fix this. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1389786735-16751-1-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-01-15ASoC: dapm: Change prototype of soc_widget_readArun Shamanna Lakshmi
soc_widget_read API returns the register data and it is possible that a register can contain 0xffffffff. Thus, change the prototype of soc_widget_read to return only the error code and pass the reg data through pointer argument. Signed-off-by: Arun Shamanna Lakshmi <aruns@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-15Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge patches from Andrew Morton: "Six fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/percpu_counter.c: fix __percpu_counter_add() crash_dump: fix compilation error (on MIPS at least) mm: fix crash when using XFS on loopback MIPS: fix blast_icache32 on loongson2 MIPS: fix case mismatch in local_r4k_flush_icache_range() nilfs2: fix segctor bug that causes file system corruption
2014-01-15pinctrl: sirf: put gpio interrupt pin into input status automaticallyBarry Song
busses like i2c, spi and so on can parse the virq of their subnode automatically by irq_of_parse_and_map(). for example, i2c will do that in of_i2c_register_devices(). people can put hwirq number attached to a gpio controller in dts, and drivers can directly request the parsed virq. for example, for an i2c client as below, tangoc-ts@5c{ compatible = "pixcir,tangoc-ts"; interrupt-parent = <&gpio>; interrupts = <3 0>; reg = <0x5c>; }; in i2c client probe(), it will request_irq(client->irq, ...) without calling gpio_direction_input(). so here when we set irq type, we also put the pin to input direction. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: sirf: use only one irq_domain for the whole device nodeBarry Song
in sirfsoc gpio probe(), we create 5 irq_domains for 5 gpio banks. but in irq_create_of_mapping() of irqchip core level, irq_find_host() can only return the 1st irq_domain attached the pinctrl dt device node as we can see from the codes: unsigned int irq_create_of_mapping(struct device_node *controller, const u32 *intspec, unsigned int intsize) { struct irq_domain *domain; ... domain = controller ? irq_find_host(controller) : irq_default_domain; } struct irq_domain *irq_find_host(struct device_node *node) { struct irq_domain *h, *found = NULL; int rc; /* We might want to match the legacy controller last since * it might potentially be set to match all interrupts in * the absence of a device node. This isn't a problem so far * yet though... */ mutex_lock(&irq_domain_mutex); list_for_each_entry(h, &irq_domain_list, link) { if (h->ops->match) rc = h->ops->match(h, node); else rc = (h->of_node != NULL) && (h->of_node == node); if (rc) { found = h; break; } } mutex_unlock(&irq_domain_mutex); return found; } for sirfsoc, the 1st irq_domain attached to the device_node(controller) only can do linear for the 1st 32 gpios. so for devices who use gpio hwirq above 32 and put the information in dt like: tangoc-ts@5c{ compatible = "pixcir,tangoc-ts"; + interrupt-parent = <&gpio>; + interrupts = <34 0>; }; we will fail to get the virq for these devices as hwirq will be bigger than domain->revmap_data.linear.size in: unsigned int irq_linear_revmap(struct irq_domain *domain, irq_hw_number_t hwirq) { /* Check revmap bounds; complain if exceeded */ if (WARN_ON(hwirq >= domain->revmap_data.linear.size)) return 0; return domain->revmap_data.linear.revmap[hwirq]; } this patch drops redundant irq_domain and keep only one to fix the problem. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15Merge tag 'md/3.13-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull late md fixes from Neil Brown: "Half a dozen md bug fixes. All of these fix real bugs the people have hit, and are tagged for -stable. Sorry they are late .... Christmas holidays and all that. Hopefully they can still squeak into 3.13" * tag 'md/3.13-fixes' of git://neil.brown.name/md: md: fix problem when adding device to read-only array with bitmap. md/raid10: fix bug when raid10 recovery fails to recover a block. md/raid5: fix a recently broken BUG_ON(). md/raid1: fix request counting bug in new 'barrier' code. md/raid10: fix two bugs in handling of known-bad-blocks. md/raid5: Fix possible confusion when multiple write errors occur.
2014-01-15Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "One nouveau regression fix on older cards, i915 black screen fixes, and a revert for a strange G33 intel problem" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix null ptr dereferences on some boards Revert "drm: copy mode type in drm_mode_connector_list_update()" drm/i915/bdw: make sure south port interrupts are enabled properly v2 drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init() drm/i915: fix DDI PLLs HW state readout code
2014-01-15gpio: pxa: clamp gpio get value to [0,1]Neil Zhang
It would be convenient to normalize the return value for gpio_get. I have checked mach-mmp / mach-pxa / plat-pxa / plat-orion / mach-orion5x. It's OK for all of them to change this function to return 0 and 1. Signed-off-by: Neil Zhang <zhangwm@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: single: fix infinite loop caused by bad maskTomi Valkeinen
commit 4e7e8017a80e1 (pinctrl: pinctrl-single: enhance to configure multiple pins of different modules) improved support for pinctrl-single,bits option, but also caused a regression in parsing badly configured mask data. If the masks in DT data are not quite right, pcs_parse_bits_in_pinctrl_entry() can end up in an infinite loop, trashing memory at the same time. Add a check to verify that each loop actually removes bits from the 'mask', so that the loop can eventually end. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: single: fix pcs_disable with bits_per_muxTomi Valkeinen
pcs_enable() uses vals->mask instead of pcs->fmask when bits_per_mux is enabled. However, pcs_disable() always uses pcs->fmask. Fix pcs_disable() to use vals->mask with bits_per_mux. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-15pinctrl: single: fix DT bindings documentationTomi Valkeinen
Remove extra comma in pinctrl-single documentation. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-14 12:12:43 +0000