| Age | Commit message (Collapse) | Author |
|---|
|
Every place thread_exit is called is at the end of a function started
with kthread_run. The code in kthread_run has arranged things so a
kernel thread can just return and do_exit will be called.
So just have the threads return instead of calling complete_and_exit.
Link: https://lkml.kernel.org/r/20211020174406.17889-18-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Directly calling do_exit with a signal number has the problem that
all of the side effects of the signal don't happen, such as
killing all of the threads of a process instead of just the
calling thread.
So replace do_exit(SIGSYS) with force_fatal_sig(SIGSYS) which
causes the signal handling to take it's normal path and work
as expected.
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20211020174406.17889-17-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Modify the 32bit version of setup_rt_frame and setup_frame to act
similar to the 64bit version of setup_rt_frame and fail with a signal
instead of calling do_exit.
Replacing do_exit(SIGILL) with force_fatal_signal(SIGILL) ensures that
the process will be terminated cleanly when the stack frame is
invalid, instead of just killing off a single thread and leaving the
process is a weird state.
Cc: David Miller <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://lkml.kernel.org/r/20211020174406.17889-16-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The function try_to_clear_window_buffer is only called from
rtrap_32.c. After it is called the signal pending state is retested,
and signals are handled if TIF_SIGPENDING is set. This allows
try_to_clear_window_buffer to call force_fatal_signal and then rely on
the signal being delivered to kill the process, without any danger of
returning to userspace, or otherwise using possible corrupt state on
failure.
The functional difference between force_fatal_sig and do_exit is that
do_exit will only terminate a single thread, and will never trigger a
core-dump. A multi-threaded program for which a single thread
terminates unexpectedly is hard to reason about. Calling force_fatal_sig
does not give userspace a chance to catch the signal, but otherwise
is an ordinary fatal signal exit, and it will trigger a coredump
of the offending process if core dumps are enabled.
Cc: David Miller <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://lkml.kernel.org/r/20211020174406.17889-15-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Use force_fatal_sig instead of calling do_exit directly. This ensures
the ordinary signal handling path gets invoked, core dumps as
appropriate get created, and for multi-threaded processes all of the
threads are terminated not just a single thread.
When asked Gabriel Krisman Bertazi <krisman@collabora.com> said [1]:
> ebiederm@xmission.com (Eric W. Biederman) asked:
>
> > Why does do_syscal_user_dispatch call do_exit(SIGSEGV) and
> > do_exit(SIGSYS) instead of force_sig(SIGSEGV) and force_sig(SIGSYS)?
> >
> > Looking at the code these cases are not expected to happen, so I would
> > be surprised if userspace depends on any particular behaviour on the
> > failure path so I think we can change this.
>
> Hi Eric,
>
> There is not really a good reason, and the use case that originated the
> feature doesn't rely on it.
>
> Unless I'm missing yet another problem and others correct me, I think
> it makes sense to change it as you described.
>
> > Is using do_exit in this way something you copied from seccomp?
>
> I'm not sure, its been a while, but I think it might be just that. The
> first prototype of SUD was implemented as a seccomp mode.
If at some point it becomes interesting we could relax
"force_fatal_sig(SIGSEGV)" to instead say
"force_sig_fault(SIGSEGV, SEGV_MAPERR, sd->selector)".
I avoid doing that in this patch to avoid making it possible
to catch currently uncatchable signals.
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
[1] https://lkml.kernel.org/r/87mtr6gdvi.fsf@collabora.com
Link: https://lkml.kernel.org/r/20211020174406.17889-14-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Add a simple helper force_fatal_sig that causes a signal to be
delivered to a process as if the signal handler was set to SIG_DFL.
Reimplement force_sigsegv based upon this new helper. This fixes
force_sigsegv so that when it forces the default signal handler
to be used the code now forces the signal to be unblocked as well.
Reusing the tested logic in force_sig_info_to_task that was built for
force_sig_seccomp this makes the implementation trivial.
This is interesting both because it makes force_sigsegv simpler and
because there are a couple of buggy places in the kernel that call
do_exit(SIGILL) or do_exit(SIGSYS) because there is no straight
forward way today for those places to simply force the exit of a
process with the chosen signal. Creating force_fatal_sig allows
those places to be implemented with normal signal exits.
Link: https://lkml.kernel.org/r/20211020174406.17889-13-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
In 2009 Oleg reworked[1] the kernel threads so that it is not
necessary to call do_exit if you are not using kthread_stop(). Remove
the explicit calls of do_exit and complete_and_exit (with a NULL
completion) that were previously necessary.
[1] 63706172f332 ("kthreads: rework kthread_stop()")
Link: https://lkml.kernel.org/r/20211020174406.17889-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Reading the history it is unclear why default_trap_handler calls
do_exit. It is not even menthioned in the commit where the change
happened. My best guess is that because it is unknown why the
exception happened it was desired to guarantee the process never
returned to userspace.
Using do_exit(SIGSEGV) has the problem that it will only terminate one
thread of a process, leaving the process in an undefined state.
Use force_sigsegv(SIGSEGV) instead which effectively has the same
behavior except that is uses the ordinary signal mechanism and
terminates all threads of a process and is generally well defined.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Fixes: ca2ab03237ec ("[PATCH] s390: core changes")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lkml.kernel.org/r/20211020174406.17889-11-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Commit a6b8bb6a813a ("i2c: i801: Fix handling SMBHSTCNT_PEC_EN")
attempts to disable software PEC by clearing the SMBHSTCNT_PEC_EN (bit 7)
in the SMBus Host Control register (I/O SMBHSTCNT) but incorrectly
clears it in the PCI Host Configuration register (PCI SMBHSTCFG).
This clearing is actually needless since after above commit the
SMBHSTCNT_PEC_EN is never set and the register is initialized with known
values.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
close_range() test type conflicts with close_range() library call in
x86_64-linux-gnu/bits/unistd_ext.h. Fix it by changing the name to
core_close_range().
gcc -g -I../../../../usr/include/ close_range_test.c -o ../tools/testing/selftests/core/close_range_test
In file included from close_range_test.c:16:
close_range_test.c:57:6: error: conflicting types for ‘close_range’; have ‘void(struct __test_metadata *)’
57 | TEST(close_range)
| ^~~~~~~~~~~
../kselftest_harness.h:181:21: note: in definition of macro ‘__TEST_IMPL’
181 | static void test_name(struct __test_metadata *_metadata); \
| ^~~~~~~~~
close_range_test.c:57:1: note: in expansion of macro ‘TEST’
57 | TEST(close_range)
| ^~~~
In file included from /usr/include/unistd.h:1204,
from close_range_test.c:13:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:56:12: note: previous declaration of ‘close_range’ with type ‘int(unsigned int, unsigned int, int)’
56 | extern int close_range (unsigned int __fd, unsigned int __max_fd,
| ^~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, we have these errors:
$ mypy ./tools/testing/kunit/*.py
tools/testing/kunit/kunit_kernel.py:213: error: Item "_Loader" of "Optional[_Loader]" has no attribute "exec_module"
tools/testing/kunit/kunit_kernel.py:213: error: Item "None" of "Optional[_Loader]" has no attribute "exec_module"
tools/testing/kunit/kunit_kernel.py:214: error: Module has no attribute "QEMU_ARCH"
tools/testing/kunit/kunit_kernel.py:215: error: Module has no attribute "QEMU_ARCH"
exec_module
===========
pytype currently reports no errors, but that's because there's a comment
disabling it on 213.
This is due to https://github.com/python/typeshed/pull/2626.
The fix is to assert the loaded module implements the ABC
(abstract base class) we want which has exec_module support.
QEMU_ARCH
=========
pytype is fine with this, but mypy is not:
https://github.com/python/mypy/issues/5059
Add a check that the loaded module does indeed have QEMU_ARCH.
Note: this is not enough to appease mypy, so we also add a comment to
squash the warning.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Reduce maintenance burden of DVSEC query implementation by using the
centralized PCI core implementation.
There are two obvious places to simply drop in the new core
implementation. There remains find_dvsec_from_pos() which would benefit
from using a core implementation. As that change is less trivial it is
reserved for later.
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> (v1)
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/163379789065.692348.7117946955275586530.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Reduce maintenance burden of DVSEC query implementation by using the
centralized PCI core implementation.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: kill cxl_pci_dvsec()]
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163379788528.692348.11581080806976608802.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add pci_find_dvsec_capability to locate a Designated Vendor-Specific
Extended Capability with the specified Vendor ID and Capability ID.
The Designated Vendor-Specific Extended Capability (DVSEC) allows one or
more "vendor" specific capabilities that are not tied to the Vendor ID
of the PCI component. Where the DVSEC Vendor may be a standards body
like CXL.
Cc: David E. Box <david.e.box@linux.intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-pci@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163379787943.692348.6814373487017444007.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for moving parts of register mapping to cxl_core, split
cxl_pci_setup_regs() into a helper that finds register blocks,
(cxl_find_regblock()), and a generic wrapper that probes the precise
register sets within a block (cxl_setup_regs()).
Move the actual mapping (cxl_map_regs()) of the only register-set that
cxl_pci cares about (memory device registers) up a level from the former
cxl_pci_setup_regs() into cxl_pci_probe().
With this change the unused component registers are no longer mapped,
but the helpers are primed to move into the core.
[djbw: drop cxl_map_regs() for component registers]
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: rebase on the cxl_register_map refactor]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163434053788.914258.18412599112859205220.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In addition to carrying @barno, @block_offset, and @reg_type, add @base
to keep all map/unmap parameters in one object. The helpers
cxl_{map,unmap}_regblock() handle adjusting @base to the @block_offset
at map and unmap time.
Document that @base incorporates @block_offset so that downstream
consumers of a mapped cxl_register_map instance do not need perform any
fixups / can use @base directly.
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163433497228.889435.11271988238496181536.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The structure exists to pass around information about register mapping.
Use it for passing @barno and @block_offset, and eliminate duplicate
local variables.
The helpers that use @map do not care about @cxlm, so just pass them a
pdev instead.
[djbw: reorder before cxl_pci_setup_regs() refactor to improver readability]
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
[djbw: separate @base conversion]
Link: https://lore.kernel.org/r/163416901172.806743.10056306321247850914.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Quoting Dan, "... the request + release regions should probably just be
dropped. It's not like any of the register enumeration would collide
with someone else who already has the registers mapped. The collision
only comes when the registers are mapped for their final usage, and that
will have more precision in the request."
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163379785872.692348.8981679111988251260.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_pci_map_regblock() may return an ERR_PTR(), but cxl_pci_setup_regs()
is only prepared for NULL as the error case. Pick the minimal fix for
-stable backport purposes and just have cxl_pci_map_regblock() return
NULL for errors.
Fixes: f8a7e8c29be8 ("cxl/pci: Reserve all device regions at once")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163433325724.834522.17809774578178224149.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
While interesting to driver developers, the dev_dbg message doesn't do
much except clutter up logs. This information should be attainable
through sysfs, and someday lspci like utilities. This change
additionally helps reduce the LOC in a subsequent patch to refactor some
of cxl_pci register mapping.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163379784717.692348.3478221381958300790.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In preparation for passing around the Register Block Indicator (RBI) as
a parameter, it is desirable to convert the type to an enum so that the
interface can use a well defined parameter.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
[djbw: changelog fixups ]
Link: https://lore.kernel.org/r/163379784199.692348.4366131432595112771.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Disable showing bus-info information for port representors in switchdev
mode. This fixes a bug that caused displaying wrong netdev descriptions in
lshw tool - one port representor displayed PF branding string, and in turn
one PF displayed a "generic" description. The bug occurs when many devices
show the same bus-info in ethtool, which was the case in switchdev mode (PF
and its port representors displayed the same bus-info). The bug occurs only
if a port representor netdev appears before PF netdev in /proc/net/dev.
In the examples below:
ens6fX is PF
ens6fXvY is VF
ethX is port representor
One irrelevant column was removed from output
Before:
$ sudo lshw -c net -businfo
Bus info Device Description
=========================================
pci@0000:02:00.0 eth102 Ethernet Controller E810-XXV for SFP
pci@0000:02:00.1 ens6f1 Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0 ens6f0v0 Ethernet Adaptive Virtual Function
pci@0000:02:01.1 ens6f0v1 Ethernet Adaptive Virtual Function
pci@0000:02:01.2 ens6f0v2 Ethernet Adaptive Virtual Function
pci@0000:02:00.0 ens6f0 Ethernet interface
Notice that eth102 and ens6f0 have the same bus-info and their descriptions
are swapped.
After:
$ sudo lshw -c net -businfo
Bus info Device Description
=========================================
pci@0000:02:00.0 ens6f0 Ethernet Controller E810-XXV for SFP
pci@0000:02:00.1 ens6f1 Ethernet Controller E810-XXV for SFP
pci@0000:02:01.0 ens6f0v0 Ethernet Adaptive Virtual Function
pci@0000:02:01.1 ens6f0v1 Ethernet Adaptive Virtual Function
pci@0000:02:01.2 ens6f0v2 Ethernet Adaptive Virtual Function
Fixes: 7aae80cef7ba ("ice: add port representor ethtool ops and stats")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request:
- fix nvmet-tcp header digest verification (Amit Engel)
- fix a memory leak in nvmet-tcp when releasing a queue (Maurizio
Lombardi)
- fix nvme-tcp H2CData PDU send accounting again (Sagi Grimberg)
- fix digest pointer calculation in nvme-tcp and nvmet-tcp (Varun
Prakash)
- fix possible nvme-tcp req->offset corruption (Varun Prakash)
- Queue drain ordering fix (Ming)
- Partition check regression for zoned devices (Shin'ichiro)
- Zone queue restart fix (Naohiro)
* tag 'block-5.15-2021-10-29' of git://git.kernel.dk/linux-block:
block: Fix partition check for host-aware zoned block devices
nvmet-tcp: fix header digest verification
nvmet-tcp: fix data digest pointer calculation
nvme-tcp: fix data digest pointer calculation
nvme-tcp: fix possible req->offset corruption
block: schedule queue restart after BLK_STS_ZONE_RESOURCE
block: drain queue after disk is removed from sysfs
nvme-tcp: fix H2CData PDU send accounting (again)
nvmet-tcp: fix a memory leak when releasing a queue
|
|
Testing revealed a problem with how the reference tag was handled for
a WRITE_INSERT operation. The SCSI_PROT_REF_CHECK flag is not set when
the controller is asked to generate the protection information
(i.e. not DIX). And as a result the initial reference tag would not be
set in the WRITE_INSERT case.
Separate handling of the REF_CHECK and REF_INCREMENT flags to align
with both the DIX spec and the MPI implementation.
Link: https://lore.kernel.org/r/20211028034202.24225-1-martin.petersen@oracle.com
Fixes: b3e2c72af1d5 ("scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When spawning VFs in switchdev mode, internal filter list of VSIs is
cleared, which includes MAC rules. However MAC entries stay on netdev's
multicast list, which causes error message when bringing link up after
spawning VFs ("Failed to delete MAC filters"). __dev_mc_sync() is
called and tries to unsync addresses that were already removed
internally when adding VFs.
This can be reproduced with:
1) Load ice driver
2) Change PF to switchdev mode
3) Bring PF link up
4) Bring PF link down
5) Create a VF on PF
6) Bring PF link up
Added clearing of netdev's multicast (and also unicast) list when
spawning VFs in switchdev mode, so the state of internal rule list and
netdev's MAC list is consistent.
Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Convert the NXP FlexSPI binding to DT schema format using json-schema.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210927105818.445675-1-kuldeep.singh@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If we return before the end of the 'for_each_child_of_node()' iterator, the
reference taken on 'np' must be released.
Add the missing 'of_node_put()' call.
Fixes: c413983eb66a ("ASoC: rsnd: adjust disabled module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/4c0e893cbfa21dc76c1ede0b6f4f8cff42209299.1634586167.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Up to now aic3x_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211019074125.3812513-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'const' qualifiers are missing on some platforms, add as needed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-7-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have multiple entries for the same codecs, use the new compatible
IDs to have a single entry.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-6-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have multiple entries for the same codecs, use the new compatible
IDs to have a single entry.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-5-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use comp_ids field to enumerate rt5682/rt5682s headphone codec for
JSL/TGL/ADL devices and remove redundant entries in tables.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-4-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Detect whether the headphone codec is ALC5682I-VS or not in probe
function so we don't need to duplicate all board configs for this new
variant.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-3-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A machine driver needs to be enumerated by more than one ACPI HID if
it supports second headphone driver (i.e. rt5682 and rt5682s).
However, the id field in snd_soc_acpi_mach structure could contain
only one HID. By adding a 'comp_ids' field which can contain several
HIDs, we can enumerate a machine driver by multiple ACPI HIDs.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/20211029171409.611600-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- tmio: Re-enable card irqs after a reset
- mtk-sd: Fixup probing of cqhci for crypto
- cqhci: Fix support for suspend/resume
- vub300: Fix control-message timeouts
- dw_mmc-exynos: Fix support for tuning
- winbond: Silences build errors on M68K
- sdhci-esdhc-imx: Fix support for tuning
- sdhci-pci: Read card detect from ACPI for Intel Merrifield
- sdhci: Fix eMMC support for Thundercomm TurboX CM2290
* tag 'mmc-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: reenable card irqs after the reset callback
mmc: mediatek: Move cqhci init behind ungate clock
mmc: cqhci: clear HALT state after CQE enable
mmc: vub300: fix control-message timeouts
mmc: dw_mmc: exynos: fix the finding clock sample value
mmc: winbond: don't build on M68K
mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning circuit
mmc: sdhci-pci: Read card detect from ACPI for Intel Merrifield
mmc: sdhci: Map more voltage level to SDHCI_POWER_330
|
|
Currently, the vlan_promisc flag is used exclusively by VF VSI to
determine whether or not to toggle VLAN pruning along with
trusted/true-promiscuous mode. This is not needed for a couple of
reasons. First, trusted/true-promiscuous mode is only supposed to allow
all MAC filters within VLANs that a VF has added filters for, so VLAN
pruning should not be disabled. Second, the boolean argument makes the
function confusing and unintuitive. Remove this flag.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Last minute fixes for crash on 32bit architectures when compression is
in use. It's a regression introduced in 5.15-rc and I'd really like
not let this into the final release, fixes via stable trees would add
unnecessary delay.
The problem is on 32bit architectures with highmem enabled, the pages
for compression may need to be kmapped, while the patches removed that
as we don't use GFP_HIGHMEM allocations anymore. The pages that don't
come from local allocation still may be from highmem. Despite being on
32bit there's enough such ARM machines in use so it's not a marginal
issue.
I did full reverts of the patches one by one instead of a huge one.
There's one exception for the "lzo" revert as there was an
intermediate patch touching the same code to make it compatible with
subpage. I can't revert that one too, so the revert in lzo.c is
manual. Qu Wenruo has worked on that with me and verified the changes"
* tag 'for-5.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: compression: drop kmap/kunmap from lzo"
Revert "btrfs: compression: drop kmap/kunmap from zlib"
Revert "btrfs: compression: drop kmap/kunmap from zstd"
Revert "btrfs: compression: drop kmap/kunmap from generic helpers"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing comment fixes from Steven Rostedt:
- Some bots have informed me that some of the ftrace functions
kernel-doc has formatting issues.
- Also, fix my snake instinct.
* tag 'trace-v5.15-rc6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix misspelling of "missing"
ftrace: Fix kernel-doc formatting issues
|
|
The _reset_hw_base method switched from port reset (CTRL[26]) to device
reset (CTRL[29]) since the FW was receiving an interrupt on CTRL[29].
FW code was later modified to also receive an interrupt on CTRL[26].
Since certain HW values are not reset to default by CTRL[29], we go back
to CTRL[26] for the HW reset, as it meets all current requirements.
This reverts commit bb4265ec24c1 ("igc: Update the MAC reset flow").
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a build-time warning in x86/sm4"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm4 - Fix invalid section entry size
|
|
Add a new implementation for mmap by using the new mmap entry API. This
makes way for further use of the dynamic mmap allocator in this driver.
Link: https://lore.kernel.org/r/20211028105640.1056-1-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Merge misc fixes from Andrew Morton:
"11 patches.
Subsystems affected by this patch series: mm (memcg, memory-failure,
oom-kill, secretmem, vmalloc, hugetlb, damon, and tools), and ocfs2"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/testing/selftests/vm/split_huge_page_test.c: fix application of sizeof to pointer
mm/damon/core-test: fix wrong expectations for 'damon_split_regions_of()'
mm: khugepaged: skip huge page collapse for special files
mm, thp: bail out early in collapse_file for writeback page
mm/vmalloc: fix numa spreading for large hash tables
mm/secretmem: avoid letting secretmem_users drop to zero
ocfs2: fix race between searching chunks and release journal_head from buffer_head
mm/oom_kill.c: prevent a race between process_mrelease and exit_mmap
mm: filemap: check if THP has hwpoisoned subpage for PMD page fault
mm: hwpoison: remove the unnecessary THP check
memcg: page_alloc: skip bulk allocator for __GFP_ACCOUNT
|
|
Add new device ID for the next step of the silicon and
reflect the I226_LMVP part.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
i225 devices only have copper phy media type. There is no point in
checking phy media type during the phy initialization. This patch cleans
up a pointless check.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The variable ret_val is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The driver tried to use Linux' native software I2C bus master
(i2c-algo-bits) for exporting the I2C interface that talks to the SFP
cage(s) towards userspace. As-is, however, the physical SCL/SDA pins
were not moving at all, staying at logical 1 all the time.
The main culprit was the I2CPARAMS register where igb was not setting
the I2CBB_EN bit. That meant that all the careful signal bit-banging was
actually not being propagated to the chip pads (I verified this with a
scope).
The bit-banging was not correct either, because I2C is supposed to be an
open-collector bus, and the code was driving both lines via a totem
pole. The code was also trying to do operations which did not make any
sense with the i2c-algo-bits, namely manipulating both SDA and SCL from
igb_set_i2c_data (which is only supposed to set SDA). I'm not sure if
that was meant as an optimization, or was just flat out wrong, but given
that the i2c-algo-bits is set up to work with a totally dumb GPIO-ish
implementation underneath, there's no need for this code to be smart.
The open-drain vs. totem-pole is fixed by the usual trick where the
logical zero is implemented via regular output mode and outputting a
logical 0, and the logical high is implemented via the IO pad configured
as an input (thus floating), and letting the mandatory pull-up resistors
do the rest. Anything else is actually wrong on I2C where all devices
are supposed to have open-drain connection to the bus.
The missing I2CBB_EN is set (along with a safe initial value of the
GPIOs) just before registering this software I2C bus.
The chip datasheet mentions HW-implemented I2C transactions (SFP EEPROM
reads and writes) as well, but I'm not touching these for simplicity.
Tested on a LR-Link LRES2203PF-2SFP (which is an almost-miniPCIe form
factor card, a cable, and a module with two SFP cages). There was one
casualty, an old broken SFP we had laying around, which was used to
solder some thin wires as a DIY I2C breakout. Thanks for your service.
With this patch in place, I can `i2cdump -y 3 0x51 c` and read back data
which make sense. Yay.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
See-also: https://www.spinics.net/lists/netdev/msg490554.html
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix the following coccicheck warning:
./drivers/net/ethernet/intel/i40e/i40e_xsk.c:229:35-40: WARNING:
conversion to bool not needed here
./drivers/net/ethernet/intel/ice/ice_xsk.c:399:35-40: WARNING:
conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Changes instances of Intel to Cornelis in identifying strings
Link: https://lore.kernel.org/r/20211028124611.26694.71239.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Scott Breyer <scott.breyer@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Changes instances of Intel to Cornelis in identifying strings
Link: https://lore.kernel.org/r/20211028124606.26694.71567.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Scott Breyer <scott.breyer@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Changes instances of Intel to Cornelis in identifying strings
Link: https://lore.kernel.org/r/20211028124601.26694.35662.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Scott Breyer <scott.breyer@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
