summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-28wcn36xx: add missing 5GHz channels 136 and 144Benjamin Li
The official feature-complete WCN3680B driver (known as prima, open source but not upstream) supports channels 136 and 144. However, these channels are missing in upstream. Add them here to get closer to feature parity with prima. Signed-off-by: Benjamin Li <benl@squareup.com> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025175359.3591048-3-benl@squareup.com
2021-10-28wcn36xx: switch on antenna diversity feature bitBenjamin Li
The official feature-complete WCN3680B driver (known as prima, open source but not upstream) sends this feature bit. As we wish to support the antenna diversity feature in upstream, we need to set this bit as well. Signed-off-by: Benjamin Li <benl@squareup.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211025175359.3591048-2-benl@squareup.com
2021-10-28wcn36xx: Channel list update before hardware scanLoic Poulain
The channel scan list must be updated before triggering a hardware scan so that firmware takes into account the regulatory info for each single channel such as active/passive config, power, DFS, etc... Without this the firmware uses its own internal default channel configuration, which is not aligned with mac80211 regulatory rules, and misses several channels (e.g. 144). Fixes: 2f3bef4b247e ("wcn36xx: Add hardware scan offload support") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1635175328-25642-1-git-send-email-loic.poulain@linaro.org
2021-10-28Merge tag 'drm-misc-fixes-2021-10-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One patch to fix the default screen orientation on the GPD Win3 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211028072300.b4gqexq6zfhby24g@gilmour
2021-10-28drm: Add R10 and R12 FourCCLaurent Pinchart
Add FourCCs for 10- and 12-bit red formats with padding to 16 bits. They correspond to the V4L2 10- and 12-bit greyscale (V4L2_PIX_FMT_Y10 and V4L2_PIX_FMT_Y12) formats, as well as the Bayer formats with the same bit depth (V4L2_PIX_FMT_SBGGR{10,12} and all other Bayer pattern permutations). These formats are not used by any kernel driver at this point, but need to be exposed to applications by libcamera, which uses DRM FourCCs for pixel formats. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027233140.12268-1-laurent.pinchart@ideasonboard.com
2021-10-28ALSA: firewire-motu: export meter information to userspace as float valueTakashi Sakamoto
In command DSP models, one meter information consists of 4 bytes for IEEE 764 floating point (binary32). In previous patch, it is exported to userspace as 32 bit storage since the storage is also handled in ALSA firewire-motu driver as well in kernel space in which floating point arithmetic is not preferable. On the other hand, ALSA firewire-motu driver doesn't perform floating point calculation. The driver just gather meter information from isochronous packets and fill structure fields for userspace. In 'header' target of Kbuild, UAPI headers are processed before installed. In this timing, #ifdef macro with __KERNEL__ is removed. This mechanism is useful in the case so that the 32 bit storage can be accessible as u32 type in kernel space and float type in user space. We can see the same usage in ''struct acct_v3' in 'include/uapi/linux/acct.h'. This commit is for the above idea. Additionally, due to message protocol, meter information is filled with 0xffffffff in the end of period but 0xffffffff is invalid as binary32. To avoid confusion in userspace application, the last two elements are left without any assignment. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: firewire-motu: refine parser for meter information in register DSP modelsTakashi Sakamoto
After further investigation, I realize that the total number of elements in array is not enough to store all of related messages from device. This commit refines meter array and message parser. In terms of channel identifier, register DSP models are classified to two categories: 1. the target of output is selectable 828mk2, 896hd, and Traveler are in the category. They transfer messages with channel identifier between 0x00 and 0x13 for input meters, therefore 20 elements are needed to store. On the other hand, they transfer messages with channel identifier for one pair of output meters. The selection is done by asynchronous write transaction to offset 0x'ffff'f000'0b2c. The table for relationship between written value and available identifiers is below: ============= =============== written value identifier pair ============= =============== 0x00000b00 0x80/0x81 0x00000b01 0x82/0x83 ... ... 0x00000b0b 0x96/0x97 ... ... 0x00000b10 0xa0/0xa1 ... ... 0x00000b3f 0xfe/0xff ... ... greater 0xfe/0xff ============= =============== Actually in the above three models, 0x96/0x97 pair is the maximum. Thus the number of available output meter is 24. 2. all of output is available 8 pre, Ultralite, Audio Express, and 4 pre are in the category. They transfer messages for output meters without any selection. The table for available identifier for each direction is below: ============== ========= ========== model input output ============== ========= ========== 8 pre 0x00-0x0f 0x82-0x8d Ultralite 0x00-0x09 0x82-0x8f Audio Express 0x00-0x09 0x80-0x8d 4 pre 0x00-0x09 0x80-0x8d ============== ========= ========== Some of available identifiers might not be used for actual output meters. Anyway, 24 plus 24 elements accommodate the input/output meters. I note that isochronous packet from V3HD/V4HD deliver no message. Notification by asynchronous transaction to registered address seems to be used for the purpose as well as for change of mixer parameter. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: firewire-motu: fix null pointer dereference when polling hwdep ↵Takashi Sakamoto
character device ALSA firewire-motu driver recently got support for event notification via ALSA HwDep interface for register DSP models. However, when polling ALSA HwDep cdev, the driver can cause null pointer dereference for the other models due to accessing to unallocated memory or uninitialized memory. This commit fixes the bug by check the type of model before accessing to the memory. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Fixes: 634ec0b2906e ("ALSA: firewire-motu: notify event for parameter change in register DSP model") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20211027125529.54295-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28ALSA: hda/realtek: Add a quirk for HP OMEN 15 mute LEDTakashi Iwai
HP OMEN 15 laptop requires the quirk to fiddle with COEF 0x0b bit 2 for toggling the mute LED. It's already implemented for other HP laptops, and we just need to add a proper fixup entry. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214735 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211028070911.18891-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-28powerpc/security: Use a mutex for interrupt exit code patchingRussell Currey
The mitigation-patching.sh script in the powerpc selftests toggles all mitigations on and off simultaneously, revealing that rfi_flush and stf_barrier cannot safely operate at the same time due to races in updating the static key. On some systems, the static key code throws a warning and the kernel remains functional. On others, the kernel will hang or crash. Fix this by slapping on a mutex. Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211027072410.40950-1-ruscur@russell.cc
2021-10-28xfrm: Remove redundant fields and related parenthesesluo penghao
The variable err is not necessary in such places. It should be revmoved for the simplicity of the code. This will cause the double parentheses to be redundant, and the inner parentheses should be deleted. The clang_analyzer complains as follows: net/xfrm/xfrm_input.c:533: warning: net/xfrm/xfrm_input.c:563: warning: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'. Changes in v2: Modify the title, because v2 removes the brackets. Remove extra parentheses. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-10-28Merge tag 'drm-misc-fixes-2021-10-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc8: - Fix fence leak in ttm_transfered_destroy. - Add quirk for Aya Neo 2021 - Reset property count for each drm damage selftest so full run will work correctly. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4a133970-ff4b-aa62-d346-b269b1b9236e@linux.intel.com
2021-10-28Merge tag 'amd-drm-fixes-5.15-2021-10-27' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.15-2021-10-27: amdgpu: - Display fixes for DCN 3.1 - Fix potential out of bounds write in debugfs Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211028023130.4528-1-alexander.deucher@amd.com
2021-10-28Merge tag 'drm-msm-next-2021-10-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-next * eDP support in DP sub-driver (for newer SoCs with native eDP output) * dpu irq handling cleanup * CRC support for making igt happy * Support for NO_CONNECTOR bridges * dsi: 14nm phy support for msm8953 * mdp5: support for msm8x53, sdm450, sdm632 * various smaller fixes and cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsH9EwcpqGNNRJeL99NvFFjHX3SUg+nTYu0dHG5U9+QuA@mail.gmail.com
2021-10-28BackMerge tag 'v5.15-rc7' into drm-nextDave Airlie
The msm next tree is based on rc3, so let's just backmerge rc7 before pulling it in. Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-10-27Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into net-next Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-27hwmon: (tmp401) Drop support for TMP461Guenter Roeck
TMP461 is almost identical to TMP451, which is already supported by the lm90 driver. At the same time, unlike other sensors from the TMP401 compatible series, it only supports 8-bit temperature read operations, and it supports negative temperatures when configured for its default temperature range, and it supports a temperature offset register. Supporting this chip in the tmp401 driver adds unnecessary complexity. Remove its support from this driver and support the chip with the lm90 driver instead. Fixes: 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations") Reported-by: David T. Wilson <david.wilson@nasa.gov> Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-27hwmon: (lm90) Add basic support for TI TMP461Guenter Roeck
TMP461 is almost identical to TMP451 and was actually detected as TMP451 with the existing lm90 driver if its I2C address is 0x4c. Add support for it to the lm90 driver. At the same time, improve the chip detection function to at least try to distinguish between TMP451 and TMP461. As a side effect, this fixes commit 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations"). TMP461 does not support word operations on temperature registers, which causes bad temperature readings with the tmp401 driver. The lm90 driver does not perform word operations on temperature registers and thus does not have this problem. Support is listed as basic because TMP461 supports a sensor resolution of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125 degrees C. Also, the TMP461 supports negative temperatures with its default temperature range, which is not the case for similar chips supported by the lm90 and the tmp401 drivers. Those limitations will be addressed with follow-up patches. Fixes: 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations") Reported-by: David T. Wilson <david.wilson@nasa.gov> Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-27hwmon: (lm90) Introduce flag indicating extended temperature supportGuenter Roeck
A flag indicating extended temperature support makes it easier to add support for additional chips with this functionality. Cc: David T. Wilson <david.wilson@nasa.gov> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-27drm/amd/display: Fix deadlock when falling back to v2 from v3Nicholas Kazlauskas
[Why] A deadlock in the kernel occurs when we fallback from the V3 to V2 add_topology_to_display or remove_topology_to_display because they both try to acquire the dtm_mutex but recursive locking isn't supported on mutex_lock(). [How] Make the mutex_lock/unlock more fine grained and move them up such that they're only required for the psp invocation itself. Fixes: bf62221e9d0e ("drm/amd/display: Add DCN3.1 HDCP support") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-27drm/amd/display: Fallback to clocks which meet requested voltage on DCN31Michael Strauss
[WHY] On certain configs, SMU clock table voltages don't match which cause parser to behave incorrectly by leaving dcfclk and socclk table entries unpopulated. [HOW] Currently the function that finds the corresponding clock for a given voltage only checks for exact voltage level matches. In the case that no match gets found, parser now falls back to searching for the max clock which meets the requested voltage (i.e. its corresponding voltage is below requested). Signed-off-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-27drm/amdgpu: Fix even more out of bound writes from debugfsPatrik Jakobsson
CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) Fixes: 918698d5c2b5 ("drm/amd/display: Return the number of bytes parsed than allocated") Signed-off-by: Patrik Jakobsson <pjakobsson@suse.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-10-27tracing: Do not warn when connecting eprobe to non existing eventSteven Rostedt (VMware)
When the syscall trace points are not configured in, the kselftests for ftrace will try to attach an event probe (eprobe) to one of the system call trace points. This triggered a WARNING, because the failure only expects to see memory issues. But this is not the only failure. The user may attempt to attach to a non existent event, and the kernel must not warn about it. Link: https://lkml.kernel.org/r/20211027120854.0680aa0f@gandalf.local.home Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-27net: phy: Fix unsigned comparison with less than zeroJiapeng Chong
Fix the following coccicheck warning: ./drivers/net/phy/at803x.c:493:5-10: WARNING: Unsigned expression compared with zero: value < 0. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 7beecaf7d507 ("net: phy: at803x: improve the WOL feature") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/1635325191-101815-1-git-send-email-jiapeng.chong@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27Merge branch 'mptcp-rework-fwd-memory-allocation-and-one-cleanup'Jakub Kicinski
Mat Martineau says: ==================== mptcp: Rework fwd memory allocation and one cleanup These patches from the MPTCP tree rework forward memory allocation for MPTCP (with some supporting changes in the net core), and also clean up an unused function parameter. Patch 1 updates TCP code but does not change any behavior, and creates some macros for reclaim thresholds that will be reused in the MPTCP code. Patch 2 adds sk_forward_alloc_get() to the networking core to support MPTCP's forward allocation with the diag interface. Patch 3 reworks forward memory for MPTCP. Patch 4 removes an unused arg and has no functional changes. ==================== Link: https://lore.kernel.org/r/20211026232916.179450-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27mptcp: drop unused sk in mptcp_push_releaseGeliang Tang
Since mptcp_set_timeout() had removed from mptcp_push_release() in commit 33d41c9cd74c5 ("mptcp: more accurate timeout"), the argument sk in mptcp_push_release() became useless. Let's drop it. Fixes: 33d41c9cd74c5 ("mptcp: more accurate timeout") Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27mptcp: allocate fwd memory separately on the rx and tx pathPaolo Abeni
All the mptcp receive path is protected by the msk socket spinlock. As consequences, the tx path has to play a few tricks to allocate the forward memory without acquiring the spinlock multiple times, making the overall TX path quite complex. This patch tries to clean-up a bit the tx path, using completely separated fwd memory allocation, for the rx and the tx path. The forward memory allocated in the rx path is now accounted in msk->rmem_fwd_alloc and is (still) protected by the msk socket spinlock. To cope with the above we provide a few MPTCP-specific variants for the helpers to charge, uncharge, reclaim and free the forward memory in the receive path. msk->sk_forward_alloc now accounts only the forward memory for the tx path, we can use the plain core sock helper to manipulate it and drop quite a bit of complexity. On memory pressure, both rx and tx fwd memories are reclaimed. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27net: introduce sk_forward_alloc_get()Paolo Abeni
A later patch will change the MPTCP memory accounting schema in such a way that MPTCP sockets will encode the total amount of forward allocated memory in two separate fields (one for tx and one for rx). MPTCP sockets will use their own helper to provide the accurate amount of fwd allocated memory. To allow the above, this patch adds a new, optional, sk method to fetch the fwd memory, wrap the call in a new helper and use it where it is appropriate. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27tcp: define macros for a couple reclaim thresholdsPaolo Abeni
A following patch is going to implement a similar reclaim schema for the MPTCP protocol, with different locking. Let's define a couple of macros for the used thresholds, so that the latter code will be more easily maintainable. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27inet: remove races in inet{6}_getname()Eric Dumazet
syzbot reported data-races in inet_getname() multiple times, it is time we fix this instead of pretending applications should not trigger them. getsockname() and getpeername() are not really considered fast path. v2: added the missing BPF_CGROUP_RUN_SA_PROG() declaration needed when CONFIG_CGROUP_BPF=n, as reported by kernel test robot <lkp@intel.com> syzbot typical report: BUG: KCSAN: data-race in __inet_hash_connect / inet_getname write to 0xffff888136d66cf8 of 2 bytes by task 14374 on cpu 1: __inet_hash_connect+0x7ec/0x950 net/ipv4/inet_hashtables.c:831 inet_hash_connect+0x85/0x90 net/ipv4/inet_hashtables.c:853 tcp_v4_connect+0x782/0xbb0 net/ipv4/tcp_ipv4.c:275 __inet_stream_connect+0x156/0x6e0 net/ipv4/af_inet.c:664 inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:728 __sys_connect_file net/socket.c:1896 [inline] __sys_connect+0x254/0x290 net/socket.c:1913 __do_sys_connect net/socket.c:1923 [inline] __se_sys_connect net/socket.c:1920 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1920 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888136d66cf8 of 2 bytes by task 14408 on cpu 0: inet_getname+0x11f/0x170 net/ipv4/af_inet.c:790 __sys_getsockname+0x11d/0x1b0 net/socket.c:1946 __do_sys_getsockname net/socket.c:1961 [inline] __se_sys_getsockname net/socket.c:1958 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1958 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0xdee0 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 14408 Comm: syz-executor.3 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20211026213014.3026708-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27xdp: Remove redundant warningYajun Deng
There is a warning in xdp_rxq_info_unreg_mem_model() when reg_state isn't equal to REG_STATE_REGISTERED, so the warning in xdp_rxq_info_unreg() is redundant. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/20211027013856.1866-1-yajun.deng@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28Merge tag 'topic/amdgpu-dp2.0-mst-2021-10-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next UAPI Changes: Nope! Cross-subsystem Changes: drm_dp_update_payload_part1() takes a new argument for specifying what the VCPI slot start is Core Changes: Make the DP MST helpers aware of the current starting VCPI slot/VCPI total slot count... Driver Changes: ...and then add support for taking advantage of this for 128b/132b links on DP 2.0 for amdgpu Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/bf8e724cc0c8803d58a8d730fd6883c991376a76.camel@redhat.com
2021-10-27net: thunderbolt: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20211026175547.3198242-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27staging: use of_get_ethdev_address()Jakub Kicinski
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20211026175038.3197397-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27net: macb: Fix mdio child node detectionGuenter Roeck
Commit 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it exists") added code to detect if a 'mdio' child node exists to the macb driver. Ths added code does, however, not actually check if the child node exists, but if the parent node exists. This results in errors such as macb 10090000.ethernet eth0: Could not attach PHY (-19) if there is no 'mdio' child node. Fix the code to actually check for the child node. Fixes: 4d98bb0d7ec2 ("net: macb: Use mdio child node for MDIO bus if it exists") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211026173950.353636-1-linux@roeck-us.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27net: sch: simplify condtion for selecting mini_Qdisc_pair bufferSeth Forshee
The only valid values for a miniq pointer are NULL or a pointer to miniq1 or miniq2, so testing for miniq_old != &miniq1 is functionally equivalent to testing that it is NULL or equal to &miniq2. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Link: https://lore.kernel.org/r/20211026183721.137930-1-seth@forshee.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27net: sch: eliminate unnecessary RCU waits in mini_qdisc_pair_swap()Seth Forshee
Currently rcu_barrier() is used to ensure that no readers of the inactive mini_Qdisc buffer remain before it is reused. This waits for any pending RCU callbacks to complete, when all that is actually required is to wait for one RCU grace period to elapse after the buffer was made inactive. This means that using rcu_barrier() may result in unnecessary waits. To improve this, store the current RCU state when a buffer is made inactive and use poll_state_synchronize_rcu() to check whether a full grace period has elapsed before reusing it. If a full grace period has not elapsed, wait for a grace period to elapse, and in the non-RT case use synchronize_rcu_expedited() to hasten it. Since this approach eliminates the RCU callback it is no longer necessary to synchronize_rcu() in the tp_head==NULL case. However, the RCU state should still be saved for the previously active buffer. Before this change I would typically see mini_qdisc_pair_swap() take tens of milliseconds to complete. After this change it typcially finishes in less than 1 ms, and often it takes just a few microseconds. Thanks to Paul for walking me through the options for improving this. Cc: "Paul E. McKenney" <paulmck@kernel.org> Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Link: https://lore.kernel.org/r/20211026130700.121189-1-seth@forshee.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27r8169: Add device 10ec:8162 to driver r8169Janghyub Seo
This patch makes the driver r8169 pick up device Realtek Semiconductor Co. , Ltd. Device [10ec:8162]. Signed-off-by: Janghyub Seo <jhyub06@gmail.com> Suggested-by: Rushab Shah <rushabshah32@gmail.com> Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27ptp: Document the PTP_CLK_MAGIC ioctl numberRandy Dunlap
Add PTP_CLK_MAGIC to the userspace-api/ioctl/ioctl-number.rst documentation file. Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20211024163831.10200-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27perf script: Show binary offsets for userspace addrLexi Shao
Show binary offsets for userspace addr with map in perf script output with callchain. In commit 19610184693c("perf script: Show virtual addresses instead of offsets"), the addr shown in perf script output with callchain is changed from binary offsets to virtual address to fix the incorrectness when displaying symbol offset. This is inconvenient in scenario that the binary is stripped and symbol cannot be resolved. If someone wants to further resolve symbols for specific binaries later, he would need an extra step to translate virtual address to binary offset with mapping information recorded in perf.data, which can be difficult for people not familiar with perf. This patch modifies function sample__fprintf_callchain to print binary offset for userspace addr with dsos, and virtual address otherwise. It does not affect symbol offset calculation so symoff remains correct. Before applying this patch: test 1512 78.711307: 533129 cycles: aaaae0da07f4 [unknown] (/tmp/test) aaaae0da0704 [unknown] (/tmp/test) ffffbe9f7ef4 __libc_start_main+0xe4 (/lib64/libc-2.31.so) After this patch: test 1519 111.330127: 406953 cycles: 7f4 [unknown] (/tmp/test) 704 [unknown] (/tmp/test) 20ef4 __libc_start_main+0xe4 (/lib64/libc-2.31.so) Fixes: 19610184693c("perf script: Show virtual addresses instead of offsets") Signed-off-by: Lexi Shao <shaolexi@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: QiuXi <qiuxi1@huawei.com> Cc: Wangbing <wangbing6@huawei.com> Cc: Xiaoming Ni <nixiaoming@huawei.com> Link: http://lore.kernel.org/lkml/20211019072417.122576-1-shaolexi@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27perf bench futex: Add support for 32-bit systems with 64-bit time_tAlistair Francis
Some 32-bit architectures (such are 32-bit RISC-V) only have a 64-bit time_t and as such don't have the SYS_futex syscall. This patch will allow us to use the SYS_futex_time64 syscall on those platforms. This also converts the futex calls to be y2038 safe (when built for a 5.1+ kernel). Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alistair Francis <alistair23@gmail.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-riscv@lists.infradead.org Link: http://lore.kernel.org/lkml/20211022013343.2262938-2-alistair.francis@opensource.wdc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27perf bench futex: Call the futex syscall from a functionAlistair Francis
In preparation for a more complex futex() function let's convert the current macro into two functions. We need two functions to avoid compiler failures as the macro is overloaded. This will allow us to include pre-processor conditionals in the futex syscall functions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alistair Francis <alistair23@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Atish Patra <atish.patra@wdc.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-riscv@lists.infradead.org Link: http://lore.kernel.org/lkml/20211022013343.2262938-1-alistair.francis@opensource.wdc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-27drm/amdgpu/display: fix build when CONFIG_DRM_AMD_DC_DCN is not setAlex Deucher
Need to guard some things with CONFIG_DRM_AMD_DC_DCN. Fixes: 41724ea273cdda ("drm/amd/display: Add DP 2.0 MST DM Support") Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211027223914.1776061-1-alexander.deucher@amd.com
2021-10-28riscv, bpf: Add BPF exception tablesTong Tiangen
When a tracing BPF program attempts to read memory without using the bpf_probe_read() helper, the verifier marks the load instruction with the BPF_PROBE_MEM flag. Since the riscv JIT does not currently recognize this flag it falls back to the interpreter. Add support for BPF_PROBE_MEM, by appending an exception table to the BPF program. If the load instruction causes a data abort, the fixup infrastructure finds the exception table and fixes up the fault, by clearing the destination register and jumping over the faulting instruction. A more generic solution would add a "handler" field to the table entry, like on x86 and s390. The same issue in ARM64 is fixed in 800834285361 ("bpf, arm64: Add BPF exception tables"). Signed-off-by: Tong Tiangen <tongtiangen@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Pu Lehui <pulehui@huawei.com> Tested-by: Björn Töpel <bjorn@kernel.org> Acked-by: Björn Töpel <bjorn@kernel.org> Link: https://lore.kernel.org/bpf/20211027111822.3801679-1-tongtiangen@huawei.com
2021-10-27MAINTAINERS: Update PCI subsystem informationKrzysztof Wilczyński
Update the following information related to the PCI subsystem which includes the PCI drivers, PCI native host bridge and endpoint drivers, and the PCI endpoint sub-system: - Sort fields as per preferred order - Sort files in the alphabetical order - Update old Patchwork URLs - Update Git repository for the PCI endpoint subsystem - Add Bugzilla link - Add link to the official IRC channel - Add files "drivers/pci/pci-bridge-emul.{c,h}" to the right section so that proper ownership is returned for both files from the get_maintainer.pl script Link: https://lore.kernel.org/r/20211027105041.24087-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-27dm crypt: log aead integrity violations to audit subsystemMichael Weiß
Since dm-crypt target can be stacked on dm-integrity targets to provide authenticated encryption, integrity violations are recognized here during aead computation. We use the dm-audit submodule to signal those events to user space, too. The construction and destruction of crypt device mappings are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-27dm integrity: log audit events for dm-integrity targetMichael Weiß
dm-integrity signals integrity violations by returning I/O errors to user space. To identify integrity violations by a controlling instance, the kernel audit subsystem can be used to emit audit events to user space. We use the new dm-audit submodule allowing to emit audit events on relevant I/O errors. The construction and destruction of integrity device mappings are also relevant for auditing a system. Thus, those events are also logged as audit events. Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-27dm: introduce audit event module for device mapperMichael Weiß
To be able to send auditing events to user space, we introduce a generic dm-audit module. It provides helper functions to emit audit events through the kernel audit subsystem. We claim the AUDIT_DM_CTRL type=1336 and AUDIT_DM_EVENT type=1337 out of the audit event messages range in the corresponding userspace api in 'include/uapi/linux/audit.h' for those events. AUDIT_DM_CTRL is used to provide information about creation and destruction of device mapper targets which are triggered by user space admin control actions. AUDIT_DM_EVENT is used to provide information about actual errors during operation of the mapped device, showing e.g. integrity violations in audit log. Following commits to device mapper targets actually will make use of this to emit those events in relevant cases. The audit logs look like this if executing the following simple test: # dd if=/dev/zero of=test.img bs=1M count=1024 # losetup -f test.img # integritysetup -vD format --integrity sha256 -t 32 /dev/loop0 # integritysetup open -D /dev/loop0 --integrity sha256 integritytest # integritysetup status integritytest # integritysetup close integritytest # integritysetup open -D /dev/loop0 --integrity sha256 integritytest # integritysetup status integritytest # dd if=/dev/urandom of=/dev/loop0 bs=512 count=1 seek=100000 # dd if=/dev/mapper/integritytest of=/dev/null ------------------------- audit.log from auditd type=UNKNOWN[1336] msg=audit(1630425039.363:184): module=integrity op=ctr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup" exe="/sbin/integritysetup" subj==unconfined dev=254:3 error_msg='success' res=1 type=UNKNOWN[1336] msg=audit(1630425039.471:185): module=integrity op=dtr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup" exe="/sbin/integritysetup" subj==unconfined dev=254:3 error_msg='success' res=1 type=UNKNOWN[1336] msg=audit(1630425039.611:186): module=integrity op=ctr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup" exe="/sbin/integritysetup" subj==unconfined dev=254:3 error_msg='success' res=1 type=UNKNOWN[1336] msg=audit(1630425054.475:187): module=integrity op=dtr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup" exe="/sbin/integritysetup" subj==unconfined dev=254:3 error_msg='success' res=1 type=UNKNOWN[1336] msg=audit(1630425073.171:191): module=integrity op=ctr ppid=3807 pid=3883 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup" exe="/sbin/integritysetup" subj==unconfined dev=254:3 error_msg='success' res=1 type=UNKNOWN[1336] msg=audit(1630425087.239:192): module=integrity op=dtr ppid=3807 pid=3902 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup" exe="/sbin/integritysetup" subj==unconfined dev=254:3 error_msg='success' res=1 type=UNKNOWN[1336] msg=audit(1630425093.755:193): module=integrity op=ctr ppid=3807 pid=3906 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup" exe="/sbin/integritysetup" subj==unconfined dev=254:3 error_msg='success' res=1 type=UNKNOWN[1337] msg=audit(1630425112.119:194): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:195): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:196): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:197): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:198): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:199): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:200): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:201): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:202): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 type=UNKNOWN[1337] msg=audit(1630425112.119:203): module=integrity op=integrity-checksum dev=254:3 sector=77480 res=0 Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de> Signed-off-by: Paul Moore <paul@paul-moore.com> # fix audit.h numbering Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-10-27watchdog: bcm63xx_wdt: fix fallthrough warningRafał Miłecki
This fixes: drivers/watchdog/bcm63xx_wdt.c: In function 'bcm63xx_wdt_ioctl': drivers/watchdog/bcm63xx_wdt.c:208:17: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211027123135.27458-1-zajec5@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2021-10-27virtio-blk: Use blk_validate_block_size() to validate block sizeXie Yongji
The block layer can't support a block size larger than page size yet. And a block size that's too small or not a power of two won't work either. If a misconfigured device presents an invalid block size in configuration space, it will result in the kernel crash something like below: [ 506.154324] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 506.160416] RIP: 0010:create_empty_buffers+0x24/0x100 [ 506.174302] Call Trace: [ 506.174651] create_page_buffers+0x4d/0x60 [ 506.175207] block_read_full_page+0x50/0x380 [ 506.175798] ? __mod_lruvec_page_state+0x60/0xa0 [ 506.176412] ? __add_to_page_cache_locked+0x1b2/0x390 [ 506.177085] ? blkdev_direct_IO+0x4a0/0x4a0 [ 506.177644] ? scan_shadow_nodes+0x30/0x30 [ 506.178206] ? lru_cache_add+0x42/0x60 [ 506.178716] do_read_cache_page+0x695/0x740 [ 506.179278] ? read_part_sector+0xe0/0xe0 [ 506.179821] read_part_sector+0x36/0xe0 [ 506.180337] adfspart_check_ICS+0x32/0x320 [ 506.180890] ? snprintf+0x45/0x70 [ 506.181350] ? read_part_sector+0xe0/0xe0 [ 506.181906] bdev_disk_changed+0x229/0x5c0 [ 506.182483] blkdev_get_whole+0x6d/0x90 [ 506.183013] blkdev_get_by_dev+0x122/0x2d0 [ 506.183562] device_add_disk+0x39e/0x3c0 [ 506.184472] virtblk_probe+0x3f8/0x79b [virtio_blk] [ 506.185461] virtio_dev_probe+0x15e/0x1d0 [virtio] So let's use a block layer helper to validate the block size. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211026144015.188-5-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-19 14:40:54 +0000