summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-10-27rtw89: Fix variable dereferenced before check 'sta'Ping-Ke Shih
The pointer rtwsta is dereferencing pointer sta before sta is being null checked. Fix this by assigning sta->drv_priv to rtwsta only if sta is not NULL, otherwise just NULL. Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211022061242.8383-1-pkshih@realtek.com
2021-10-27rtw89: fix return value in hfc_pub_cfg_chkKevin Lo
It seems to me when pub_cfg->grp0 + pub_cfg->grp1 != pub_cfg->pub_max is true, it should return -EFAULT rather than 0. Otherwise, the function doesn't need to exist. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YXEJey8lKksAZif4@ns.kevlo.org
2021-10-27rtw89: remove duplicate register definitionsKevin Lo
Remove duplicate register definitions. Signed-off-by: Kevin Lo <kevlo@kevlo.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YXD+KL+xzFsnGShb@ns.kevlo.org
2021-10-27rtw89: fix error function parameterLv Ruyi
This patch fixes the following Coccinelle warning: drivers/net/wireless/realtek/rtw89/rtw8852a.c:753: WARNING possible condition with no effect (if == else) Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211021042035.1042463-1-lv.ruyi@zte.com.cn
2021-10-27libertas: Fix possible memory leak in probe and disconnectWang Hai
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88812c7d7400 (size 512): comm "kworker/6:1", pid 176, jiffies 4295003332 (age 822.830s) hex dump (first 32 bytes): 00 68 1e 04 81 88 ff ff 01 00 00 00 00 00 00 00 .h.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490 [<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470 [<ffffffffa02c9873>] if_usb_probe+0x63/0x446 [usb8xxx] [<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore] [<ffffffff82b59630>] really_probe+0x190/0x480 [<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180 [<ffffffff82b59af3>] driver_probe_device+0x53/0x130 [<ffffffff82b5a075>] __device_attach_driver+0x105/0x130 [<ffffffff82b55949>] bus_for_each_drv+0x129/0x190 [<ffffffff82b593c9>] __device_attach+0x1c9/0x270 [<ffffffff82b5a250>] device_initial_probe+0x20/0x30 [<ffffffff82b579c2>] bus_probe_device+0x142/0x160 [<ffffffff82b52e49>] device_add+0x829/0x1300 [<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore] [<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore] [<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore] cardp is missing being freed in the error handling path of the probe and the path of the disconnect, which will cause memory leak. This patch adds the missing kfree(). Fixes: 876c9d3aeb98 ("[PATCH] Marvell Libertas 8388 802.11b/g USB driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211020120345.2016045-3-wanghai38@huawei.com
2021-10-27libertas_tf: Fix possible memory leak in probe and disconnectWang Hai
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88810a2ddc00 (size 512): comm "kworker/6:1", pid 176, jiffies 4295009893 (age 757.220s) hex dump (first 32 bytes): 00 50 05 18 81 88 ff ff 00 00 00 00 00 00 00 00 .P.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8167939c>] slab_post_alloc_hook+0x9c/0x490 [<ffffffff8167f627>] kmem_cache_alloc_trace+0x1f7/0x470 [<ffffffffa02a1530>] if_usb_probe+0x60/0x37c [libertas_tf_usb] [<ffffffffa022668a>] usb_probe_interface+0x1aa/0x3c0 [usbcore] [<ffffffff82b59630>] really_probe+0x190/0x480 [<ffffffff82b59a19>] __driver_probe_device+0xf9/0x180 [<ffffffff82b59af3>] driver_probe_device+0x53/0x130 [<ffffffff82b5a075>] __device_attach_driver+0x105/0x130 [<ffffffff82b55949>] bus_for_each_drv+0x129/0x190 [<ffffffff82b593c9>] __device_attach+0x1c9/0x270 [<ffffffff82b5a250>] device_initial_probe+0x20/0x30 [<ffffffff82b579c2>] bus_probe_device+0x142/0x160 [<ffffffff82b52e49>] device_add+0x829/0x1300 [<ffffffffa02229b1>] usb_set_configuration+0xb01/0xcc0 [usbcore] [<ffffffffa0235c4e>] usb_generic_driver_probe+0x6e/0x90 [usbcore] [<ffffffffa022641f>] usb_probe_device+0x6f/0x130 [usbcore] cardp is missing being freed in the error handling path of the probe and the path of the disconnect, which will cause memory leak. This patch adds the missing kfree(). Fixes: c305a19a0d0a ("libertas_tf: usb specific functions") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211020120345.2016045-2-wanghai38@huawei.com
2021-10-27wlcore: spi: Use dev_err_probe()Geert Uytterhoeven
Use the existing dev_err_probe() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/465e76901b801ac0755088998249928fd546c08a.1634647460.git.geert+renesas@glider.be
2021-10-27Merge tag 'iwlwifi-next-for-kalle-2021-10-22' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.16 * Support for 160MHz in ranging measurements; * Some fixes in HE capabilities; * Fixes in vendor specific capabilities; * Add the PC of both processors in error dumps; * Small fix in TDLS; * Code to sanitize firmware dumps; * Updates for new FW rate and flags format; * Continue implementation of new rate and flags format in the FW APIs; * Some fixes for BZ family initialization; * Fix session protection in some scenarios; * Some debugging improvements; * Fix BT-coex priority; * Improve PS-poll timeout detection; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Fri 22 Oct 2021 11:28:43 AM EEST # gpg: using RSA key 1772CD7E06F604F5A6EBCB26A1479CA21A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" [full] # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>" [full]
2021-10-27nvmet-tcp: fix header digest verificationAmit Engel
Pass the correct length to nvmet_tcp_verify_hdgst, which is the pdu header length. This fixes a wrong behaviour where header digest verification passes although the digest is wrong. Signed-off-by: Amit Engel <amit.engel@dell.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27fix for "dma-buf: move dma-buf symbols into the DMA_BUF module namespace"Stephen Rothwell
Adds the proper MODULE_IMPORT_NS(DMA_BUF) line to the file to get it to build properly. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20211027154843.622961fd@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27Merge tag 'soc-fsl-fix-v5.15-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes NXP/FSL SoC driver fixes for v5.15 DPAA2 DPIO driver - replace smp_processor_id with raw_smp_processor_id to fix preempt debug BUG - use the combined functions to protect critical zone to fix deadlock DPAA2 console - free buffer before returning from dpaa2_console_read * tag 'soc-fsl-fix-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_read soc: fsl: dpio: use the combined functions to protect critical zone soc: fsl: dpio: replace smp_processor_id with raw_smp_processor_id Link: https://lore.kernel.org/r/20211026235744.19258-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-27ALSA: ua101: fix division by zero at probeJohan Hovold
Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in alloc_stream_buffers() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support") Cc: stable@vger.kernel.org # 2.6.34 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211026095401.26522-1-johan@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-27dma-mapping: use 'bitmap_zalloc()' when applicableChristophe JAILLET
'dma_mem->bitmap' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet: use flex_array_size and struct_sizeLen Baker
In an effort to avoid open-coded arithmetic in the kernel [1], use the flex_array_size() and struct_size() helpers instead of an open-coded calculation. [1] https://github.com/KSPP/linux/issues/160 Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet: register discovery subsystem as 'current'Hannes Reinecke
Register the discovery subsystem as the 'current' discovery subsystem, and add a new discovery log page entry for it. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet: switch check for subsystem typeHannes Reinecke
Invert the check for discovery subsystem type to allow for additional discovery subsystem types. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme: add new discovery log page entry definitionsHannes Reinecke
TP8014 adds a new SUBTYPE value and a new field EFLAGS for the discovery log page entry. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvmet-tcp: fix data digest pointer calculationVarun Prakash
exp_ddgst is of type __le32, &cmd->exp_ddgst + cmd->offset increases &cmd->exp_ddgst by 4 * cmd->offset, fix this by type casting &cmd->exp_ddgst to u8 *. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme-tcp: fix data digest pointer calculationVarun Prakash
ddgst is of type __le32, &req->ddgst + req->offset increases &req->ddgst by 4 * req->offset, fix this by type casting &req->ddgst to u8 *. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27nvme-tcp: fix possible req->offset corruptionVarun Prakash
With commit db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") r2t and response PDU can get processed while send function is executing. Current data digest send code uses req->offset after kernel_sendmsg(), this creates a race condition where req->offset gets reset before it is used in send function. This can happen in two cases - 1. Target sends r2t PDU which resets req->offset. 2. Target send response PDU which completes the req and then req is used for a new command, nvme_tcp_setup_cmd_pdu() resets req->offset. Fix this by storing req->offset in a local variable and using this local variable after kernel_sendmsg(). Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-10-27KVM: s390: add debug statement for diag 318 CPNC dataCollin Walling
The diag 318 data contains values that denote information regarding the guest's environment. Currently, it is unecessarily difficult to observe this value (either manually-inserted debug statements, gdb stepping, mem dumping etc). It's useful to observe this information to obtain an at-a-glance view of the guest's environment, so lets add a simple VCPU event that prints the CPNC to the s390dbf logs. Signed-off-by: Collin Walling <walling@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20211027025451.290124-1-walling@linux.ibm.com [borntraeger@de.ibm.com]: change debug level to 3 Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-27KVM: s390: pv: properly handle page flags for protected guestsClaudio Imbrenda
Introduce variants of the convert and destroy page functions that also clear the PG_arch_1 bit used to mark them as secure pages. The PG_arch_1 flag is always allowed to overindicate; using the new functions introduced here allows to reduce the extent of overindication and thus improve performance. These new functions can only be called on pages for which a reference is already being held. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Link: https://lore.kernel.org/r/20210920132502.36111-7-imbrenda@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-27KVM: s390: Fix handle_sske page fault handlingJanis Schoetterl-Glausch
If handle_sske cannot set the storage key, because there is no page table entry or no present large page entry, it calls fixup_user_fault. However, currently, if the call succeeds, handle_sske returns -EAGAIN, without having set the storage key. Instead, retry by continue'ing the loop without incrementing the address. The same issue in handle_pfmf was fixed by a11bdb1a6b78 ("KVM: s390: Fix pfmf and conditional skey emulation"). Fixes: bd096f644319 ("KVM: s390: Add skey emulation fault handling") Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20211022152648.26536-1-scgl@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-10-27PM / devfreq: Strengthen check for freq_tableSamuel Holland
Since commit ea572f816032 ("PM / devfreq: Change return type of devfreq_set_freq_table()"), all devfreq devices are expected to have a valid freq_table. The devfreq core unconditionally dereferences freq_table in the sysfs code and in get_freq_range(). Therefore, we need to ensure that freq_table is both non-null and non-empty (length is > 0). If either check fails, replace the table using set_freq_table() or return the error. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27devfreq: exynos-ppmu: simplify parsing event-type from DTKrzysztof Kozlowski
When parsing devicetree, the function of_get_devfreq_events(), for each device child node, iterates over array of possible events "ppmu_events" till it finds one matching by node name. When match is found the ppmu_events[i] points to element having both the name of the event and the counters ID. Each PPMU device child node might have an "event-name" property with the name of the event, however due to the design of devfreq it must be the same as the device node name. If it is not the same, the devfreq client won't be able to use it via devfreq_event_get_edev_by_phandle(). Since PPMU device child node name must be equal to the "event-name" property (event-name == ppmu_events[i].name), there is no need to find the counters ID by the "event-name". Instead use ppmu_events[i].id which must be equal to it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27devfreq: exynos-ppmu: use node names with hyphensKrzysztof Kozlowski
Devicetree naming convention requires device node names to use hyphens instead of underscore, so Exynos5422 devfreq event name "ppmu-event3-dmc0_0" should be "ppmu-event3-dmc0-0". Newly introduced dtschema enforces this, however the driver still expects old name with an underscore. Add new events for Exynos5422 while still accepting old name for backwards compatibility. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27dt-bindings: extcon: usbc-tusb320: Add TUSB320L compatible stringYassine Oudjana
Add a compatible string for TUSB320L. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: usbc-tusb320: Add support for TUSB320LYassine Oudjana
TUSB320L is a newer chip with additional features, and it has additional steps in its mode changing sequence: - Disable CC state machine, - Write to mode register, - Wait for 5 ms, - Re-enable CC state machine. It also has an additional register that a revision number can be read from. Add support for the mode changing sequence, and read the revision number during probe and print it as info. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: usbc-tusb320: Add support for mode setting and resetYassine Oudjana
Reset the chip and set its mode to default (maintain mode set by PORT pin) during probe to make sure it comes up in the default state. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: extcon-axp288: Use P-Unit semaphore lock for register accessesFabio Aiuto
use low level P-Unit semaphore lock for axp288 register accesses directly and for more than one access a time, to reduce the number of times this semaphore is locked and released which is an expensive operation. i2c-bus to the XPower is shared between the kernel and the SoCs P-Unit. The P-Unit has a semaphore wich the kernel must lock for axp288 register accesses. When the P-Unit semaphore is locked CPU and GPU power states cannot change or the system will freeze. The P-Unit semaphore lock is already managed inside the regmap access logic, but for each access the semaphore is locked and released. So use directly iosf_mbi_(un)block_punit_i2c_access(), we are safe in doing so because nested calls to the same semaphore are turned to nops. Suggested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: max3355: Drop unused includeLinus Walleij
This driver includes the legacy <linux/gpio.h> header but does not use it. Drop this include. Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-27extcon: usb-gpio: Use the right includesLinus Walleij
The USB GPIO extcon driver does not use any of the legacy includes <linux/gpio.h> or <linux/of_gpio.h> but exploits the fact that this brings in <linux/mod_device_table.h>. Fix this up by using the right includes. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-10-26doc: Fix typo in request queue sysfs documentationDamien Le Moal
Fix a typo (are -> as) in the introduction paragraph of Documentation/block/queue-sysfs.rst. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-6-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26doc: document sysfs queue/independent_access_ranges attributesDamien Le Moal
Update the file Documentation/block/queue-sysfs.rst to add a description of a device queue sysfs entries related to independent access ranges (e.g. concurrent positioning ranges for multi-actuator hard-disks). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-5-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26libata: support concurrent positioning ranges logDamien Le Moal
Add support to discover if an ATA device supports the Concurrent Positioning Ranges data log (address 0x47), indicating that the device is capable of seeking to multiple different locations in parallel using multiple actuators serving different LBA ranges. Also add support to translate the concurrent positioning ranges log into its equivalent Concurrent Positioning Ranges VPD page B9h in libata-scsi.c. The format of the Concurrent Positioning Ranges Log is defined in ACS-5 r9. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26scsi: sd: add concurrent positioning ranges supportDamien Le Moal
Add the sd_read_cpr() function to the sd scsi disk driver to discover if a device has multiple concurrent positioning ranges (i.e. multiple actuators on an HDD). The existence of VPD page B9h indicates if a device has multiple concurrent positioning ranges. The page content describes each range supported by the device. sd_read_cpr() is called from sd_revalidate_disk() and uses the block layer functions disk_alloc_independent_access_ranges() and disk_set_independent_access_ranges() to represent the set of actuators of the device as independent access ranges. The format of the Concurrent Positioning Ranges VPD page B9h is defined in section 6.6.6 of SBC-5. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-3-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26block: Add independent access ranges supportDamien Le Moal
The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26net/mlx5: Lag, Make mlx5_lag_is_multipath() be static inlineMaor Dickman
Fix "no previous prototype" W=1 warnings when CONFIG_MLX5_CORE_EN is not set: drivers/net/ethernet/mellanox/mlx5/core/lag_mp.h:34:6: error: no previous prototype for ‘mlx5_lag_is_multipath’ [-Werror=missing-prototypes] 34 | bool mlx5_lag_is_multipath(struct mlx5_core_dev *dev) { return false; } | ^~~~~~~~~~~~~~~~~~~~~ Fixes: 14fe2471c628 ("net/mlx5: Lag, change multipath and bonding to be mutually exclusive") Signed-off-by: Maor Dickman <maord@nvidia.com>
2021-10-26net/mlx5e: Prevent HW-GRO and CQE-COMPRESS features operate togetherKhalid Manaa
HW-GRO and CQE-COMPRESS are mutually exclusive, this commit adds this restriction. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add HW-GRO offloadKhalid Manaa
This commit introduces HW-GRO offload by using the SHAMPO feature - Add set feature handler for HW-GRO. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add HW_GRO statisticsKhalid Manaa
This patch adds HW_GRO counters to RX packets statistics: - gro_match_packets: counter of received packets with set match flag. - gro_packets: counter of received packets over the HW_GRO feature, this counter is increased by one for every received HW_GRO cqe. - gro_bytes: counter of received bytes over the HW_GRO feature, this counter is increased by the received bytes for every received HW_GRO cqe. - gro_skbs: counter of built HW_GRO skbs, increased by one when we flush HW_GRO skb (when we call a napi_gro_receive with hw_gro skb). - gro_large_hds: counter of received packets with large headers size, in case the packet needs new SKB, the driver will allocate new one and will not use the headers entry to build it. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: HW_GRO cqe handler implementationKhalid Manaa
this patch updates the SHAMPO CQE handler to support HW_GRO, changes in the SHAMPO CQE handler: - CQE match and flush fields are used to determine if to build new skb using the new received packet, or to add the received packet data to the existing RQ.hw_gro_skb, also this fields are used to determine when to flush the skb. - in the end of the function mlx5e_poll_rx_cq the RQ.hw_gro_skb is flushed. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add data path for SHAMPO featureBen Ben-Ishay
The header buffer is used to store the headers of the rx packets. The header buffer size deduced from WorkQueue size + restriction of max packets per WorkQueueElement. This commit adds the functionality for posting/updating memory for the header buffer during the posting/updating of WQEs. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add handle SHAMPO cqe supportKhalid Manaa
This patch adds the new CQE SHAMPO fields: - flush: indicates that we must close the current session and pass the SKB to the network stack. - match: indicates that the current packet matches the oppened session, the packet will be merge into the current SKB. - header_size: the size of the packet headers that written into the headers buffer. - header_entry_index: the entry index in the headers buffer. - data_offset: packets data offset in the WQE. Also new cqe handler is added to handle SHAMPO packets: - The new handler uses CQE SHAMPO fields to build the SKB. CQE's Flush and match fields are not used in this patch, packets are not merged in this patch. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add control path for SHAMPO featureBen Ben-Ishay
This commit introduces the control path infrastructure for SHAMPO feature. SHAMPO feature enables packet stitching by splitting packets to header and payload, the header is placed on a dedicated buffer and the payload on the RX ring, this allows stitching the data part of a flow together continuously in the receive buffer. SHAMPO feature is implemented as linked list striding RQ feature. To support packets splitting and payload stitching: - Enlarge the ICOSQ and the correspond CQ to support the header buffer memory regions. - Add support to create linked list striding RQ with SHAMPO feature set in the open_rq function. - Add deallocation function and corresponded calls for SHAMPO header buffer. - Add mlx5e_create_umr_klm_mkey to support KLM mkey for the header buffer. - Rename mlx5e_create_umr_mkey to mlx5e_create_umr_mtt_mkey. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Add support to klm_umr_wqeBen Ben-Ishay
This commit adds the needed definitions for using the klm_umr_wqe. UMR stands for user-mode memory registration, is a mechanism to alter address translation properties of MKEY by posting WorkQueueElement aka WQE on send queue. MKEY stands for memory key, MKEY are used to describe a region in memory that can be later used by HW. KLM stands for {Key, Length, MemVa}, KLM_MKEY is indirect MKEY that enables to map multiple memory spaces with different sizes in unified MKEY. klm_umr_wqe is a UMR that use to update a KLM_MKEY. SHAMPO feature uses KLM_MKEY for memory registration of his header buffer. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Rename TIR lro functions to TIR packet merge functionsKhalid Manaa
This series introduces new packet merge type, therefore rename lro functions to packet merge to support the new merge type: - Generalize + rename mlx5e_build_tir_ctx_lro to mlx5e_build_tir_ctx_packet_merge. - Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge. - Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge. - Rename lro_en in mlx5e_params to packet_merge_type type and combine packet_merge params into one struct mlx5e_packet_merge_param. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5: Add SHAMPO caps, HW bits and enumerationsBen Ben-Ishay
This commit adds SHAMPO bit to hca_cap and SHAMPO capabilities structure, SHAMPO related HW spec hardware fields and enumerations. SHAMPO stands for: split headers and merge payload offload. SHAMPO new fields: WQ: - headers_mkey: mkey that represents the headers buffer, where the packets headers will be written by the HW. - shampo_enable: flag to verify if the WQ supports SHAMPO feature. - log_reservation_size: the log of the reservation size where the data of the packet will be written by the HW. - log_max_num_of_packets_per_reservation: log of the maximum number of packets that can be written to the same reservation. - log_headers_entry_size: log of the header entry size of the headers buffer. - log_headers_buffer_entry_num: log of the entries number of the headers buffer. RQ: - shampo_no_match_alignment_granularity: the HW alignment granularity in case the received packet doesn't match the current session. - shampo_match_criteria_type: the type of match criteria. - reservation_timeout: the maximum time that the HW will hold the reservation. mlx5_ifc_shampo_cap_bits, the capabilities of the SHAMPO feature: - shampo_log_max_reservation_size: the maximum allowed value of the field WQ.log_reservation_size. - log_reservation_size: the minimum allowed value of the field WQ.log_reservation_size. - shampo_min_mss_size: the minimum payload size of packet that can open a new session or be merged to a session. - shampo_max_log_headers_entry_size: the maximum allowed value of the field WQ.log_headers_entry_size Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net/mlx5e: Rename lro_timeout to packet_merge_timeoutBen Ben-Ishay
TIR stands for transport interface receive, the TIR object is responsible for performing all transport related operations on the receive side like packet processing, demultiplexing the packets to different RQ's, etc. lro_timeout is a field in the TIR that is used to set the timeout for lro session, this series introduces new packet merge type, therefore rename lro_timeout to packet_merge_timeout for all packet merge types. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-26net: Prevent HW-GRO and LRO features operate togetherBen Ben-ishay
LRO and HW-GRO are mutually exclusive, this commit adds this restriction in netdev_fix_feature. HW-GRO is preferred, that means in case both HW-GRO and LRO features are requested, LRO is cleared. Signed-off-by: Ben Ben-ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-21 20:07:17 +0000