summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-27net: dsa: sja1105: Cancel PTP delayed work on unregisterVladimir Oltean
Currently when the driver unloads and PTP is enabled, the delayed work that prevents the timecounter from expiring becomes a ticking time bomb. The kernel will schedule the work thread within 60 seconds of driver removal, but the work handler is no longer there, leading to this strange and inconclusive stack trace: [ 64.473112] Unable to handle kernel paging request at virtual address 79746970 [ 64.480340] pgd = 008c4af9 [ 64.483042] [79746970] *pgd=00000000 [ 64.486620] Internal error: Oops: 80000005 [#1] SMP ARM [ 64.491820] Modules linked in: [ 64.494871] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0-rc5-01634-ge3a2773ba9e5 #1246 [ 64.503007] Hardware name: Freescale LS1021A [ 64.507259] PC is at 0x79746970 [ 64.510393] LR is at call_timer_fn+0x3c/0x18c [ 64.514729] pc : [<79746970>] lr : [<c03bd734>] psr: 60010113 [ 64.520965] sp : c1901de0 ip : 00000000 fp : c1903080 [ 64.526163] r10: c1901e38 r9 : ffffe000 r8 : c19064ac [ 64.531363] r7 : 79746972 r6 : e98dd260 r5 : 00000100 r4 : c1a9e4a0 [ 64.537859] r3 : c1900000 r2 : ffffa400 r1 : 79746972 r0 : e98dd260 [ 64.544359] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 64.551460] Control: 10c5387d Table: a8a2806a DAC: 00000051 [ 64.557176] Process swapper/0 (pid: 0, stack limit = 0x1ddb27f0) [ 64.563147] Stack: (0xc1901de0 to 0xc1902000) [ 64.567481] 1de0: eb6a4918 3d60d7c3 c1a9e554 e98dd260 eb6a34c0 c1a9e4a0 ffffa400 c19064ac [ 64.575616] 1e00: ffffe000 c03bd95c c1901e34 c1901e34 eb6a34c0 c1901e30 c1903d00 c186f4c0 [ 64.583751] 1e20: c1906488 29e34000 c1903080 c03bdca4 00000000 eaa6f218 00000000 eb6a45c0 [ 64.591886] 1e40: eb6a45c0 20010193 00000003 c03c0a68 20010193 3f7231be c1903084 00000002 [ 64.600022] 1e60: 00000082 00000001 ffffe000 c1a9e0a4 00000100 c0302298 02b64722 0000000f [ 64.608157] 1e80: c186b3c8 c1877540 c19064ac 0000000a c186b350 ffffa401 c1903d00 c1107348 [ 64.616292] 1ea0: 00200102 c0d87a14 ea823c00 ffffe000 00000012 00000000 00000000 ea810800 [ 64.624427] 1ec0: f0803000 c1876ba8 00000000 c034c784 c18774b8 c039fb50 c1906c90 c1978aac [ 64.632562] 1ee0: f080200c f0802000 c1901f10 c0709ca8 c03091a0 60010013 ffffffff c1901f44 [ 64.640697] 1f00: 00000000 c1900000 c1876ba8 c0301a8c 00000000 000070a0 eb6ac1a0 c031da60 [ 64.648832] 1f20: ffffe000 c19064ac c19064f0 00000001 00000000 c1906488 c1876ba8 00000000 [ 64.656967] 1f40: ffffffff c1901f60 c030919c c03091a0 60010013 ffffffff 00000051 00000000 [ 64.665102] 1f60: ffffe000 c0376aa4 c1a9da37 ffffffff 00000037 3f7231be c1ab20c0 000000cc [ 64.673238] 1f80: c1906488 c1906480 ffffffff 00000037 c1ab20c0 c1ab20c0 00000001 c0376e1c [ 64.681373] 1fa0: c1ab2118 c1700ea8 ffffffff ffffffff 00000000 c1700754 c17dfa40 ebfffd80 [ 64.689509] 1fc0: 00000000 c17dfa40 3f7733be 00000000 00000000 c1700330 00000051 10c0387d [ 64.697644] 1fe0: 00000000 8f000000 410fc075 10c5387d 00000000 00000000 00000000 00000000 [ 64.705788] [<c03bd734>] (call_timer_fn) from [<c03bd95c>] (expire_timers+0xd8/0x144) [ 64.713579] [<c03bd95c>] (expire_timers) from [<c03bdca4>] (run_timer_softirq+0xe4/0x1dc) [ 64.721716] [<c03bdca4>] (run_timer_softirq) from [<c0302298>] (__do_softirq+0x130/0x3c8) [ 64.729854] [<c0302298>] (__do_softirq) from [<c034c784>] (irq_exit+0xbc/0xd8) [ 64.737040] [<c034c784>] (irq_exit) from [<c039fb50>] (__handle_domain_irq+0x60/0xb4) [ 64.744833] [<c039fb50>] (__handle_domain_irq) from [<c0709ca8>] (gic_handle_irq+0x58/0x9c) [ 64.753143] [<c0709ca8>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 64.760583] Exception stack(0xc1901f10 to 0xc1901f58) [ 64.765605] 1f00: 00000000 000070a0 eb6ac1a0 c031da60 [ 64.773740] 1f20: ffffe000 c19064ac c19064f0 00000001 00000000 c1906488 c1876ba8 00000000 [ 64.781873] 1f40: ffffffff c1901f60 c030919c c03091a0 60010013 ffffffff [ 64.788456] [<c0301a8c>] (__irq_svc) from [<c03091a0>] (arch_cpu_idle+0x38/0x3c) [ 64.795816] [<c03091a0>] (arch_cpu_idle) from [<c0376aa4>] (do_idle+0x1bc/0x298) [ 64.803175] [<c0376aa4>] (do_idle) from [<c0376e1c>] (cpu_startup_entry+0x18/0x1c) [ 64.810707] [<c0376e1c>] (cpu_startup_entry) from [<c1700ea8>] (start_kernel+0x480/0x4ac) [ 64.818839] Code: bad PC value [ 64.821890] ---[ end trace e226ed97b1c584cd ]--- [ 64.826482] Kernel panic - not syncing: Fatal exception in interrupt [ 64.832807] CPU1: stopping [ 64.835501] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 5.2.0-rc5-01634-ge3a2773ba9e5 #1246 [ 64.845013] Hardware name: Freescale LS1021A [ 64.849266] [<c0312394>] (unwind_backtrace) from [<c030cc74>] (show_stack+0x10/0x14) [ 64.856972] [<c030cc74>] (show_stack) from [<c0ff4138>] (dump_stack+0xb4/0xc8) [ 64.864159] [<c0ff4138>] (dump_stack) from [<c0310854>] (handle_IPI+0x3bc/0x3dc) [ 64.871519] [<c0310854>] (handle_IPI) from [<c0709ce8>] (gic_handle_irq+0x98/0x9c) [ 64.879050] [<c0709ce8>] (gic_handle_irq) from [<c0301a8c>] (__irq_svc+0x6c/0x90) [ 64.886489] Exception stack(0xea8cbf60 to 0xea8cbfa8) [ 64.891514] bf60: 00000000 0000307c eb6c11a0 c031da60 ffffe000 c19064ac c19064f0 00000002 [ 64.899649] bf80: 00000000 c1906488 c1876ba8 00000000 00000000 ea8cbfb0 c030919c c03091a0 [ 64.907780] bfa0: 600d0013 ffffffff [ 64.911250] [<c0301a8c>] (__irq_svc) from [<c03091a0>] (arch_cpu_idle+0x38/0x3c) [ 64.918609] [<c03091a0>] (arch_cpu_idle) from [<c0376aa4>] (do_idle+0x1bc/0x298) [ 64.925967] [<c0376aa4>] (do_idle) from [<c0376e1c>] (cpu_startup_entry+0x18/0x1c) [ 64.933496] [<c0376e1c>] (cpu_startup_entry) from [<803025cc>] (0x803025cc) [ 64.940422] Rebooting in 3 seconds.. In this case, what happened is that the DSA driver failed to probe at boot time due to a PHY issue during phylink_connect_phy: [ 2.245607] fsl-gianfar soc:ethernet@2d90000 eth2: error -19 setting up slave phy [ 2.258051] sja1105 spi0.1: failed to create slave for port 0.0 Fixes: bb77f36ac21d ("net: dsa: sja1105: Add support for the PTP clock") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: sja1105: Build PTP support in main DSA driverVladimir Oltean
As Arnd Bergmann pointed out in commit 78fe8a28fb96 ("net: dsa: sja1105: fix ptp link error"), there is no point in having PTP support as a separate loadable kernel module. So remove the exported symbols and make sja1105.ko contain PTP support or not based on CONFIG_NET_DSA_SJA1105_PTP. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27Merge branch 'net-dsa-microchip-Convert-to-regmap'David S. Miller
Marek Vasut says: ==================== net: dsa: microchip: Convert to regmap This patchset converts KSZ9477 switch driver to regmap. This was tested with extra patches on KSZ8795. This was also tested on KSZ9477 on Microchip KSZ9477EVB board, which I now have. ==================== Signed-off-by: Marek Vasut <marex@denx.de>
2019-06-27net: dsa: microchip: Replace ad-hoc bit manipulation with regmapMarek Vasut
Regmap provides bit manipulation functions to set/clear bits, use those insted of reimplementing them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Factor out regmap config generation into common headerMarek Vasut
The regmap config tables are rather similar for various generations of the KSZ8xxx/KSZ9xxx switches. Introduce a macro which allows generating those tables without duplication. Note that $regalign parameter is not used right now, but will be used in KSZ87xx series switches. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Dispose of ksz_io_opsMarek Vasut
Since the driver now uses regmap , get rid of ad-hoc ksz_io_ops abstraction, which no longer has any meaning. Moreover, since regmap has it's own locking, get rid of the register access mutex. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Initial SPI regmap supportMarek Vasut
Add basic SPI regmap support into the driver. Previous patches unconver that ksz_spi_write() is always ever called with len = 1, 2 or 4. We can thus drop the if (len > SPI_TX_BUF_LEN) check and we can also drop the allocation of the txbuf which is part of the driver data and wastes 256 bytes for no reason. Regmap covers the whole thing now. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Factor out register access opcode generationMarek Vasut
Factor out the code which sends out the register read/write opcodes to the switch, since the code differs in single bit between read and write. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Use PORT_CTRL_ADDR() instead of indirect function callMarek Vasut
The indirect function call to dev->dev_ops->get_port_addr() is expensive especially if called for every single register access, and only returns the value of PORT_CTRL_ADDR() macro. Use PORT_CTRL_ADDR() macro directly instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Move ksz_cfg and ksz_port_cfg to ksz9477.cMarek Vasut
These functions are only used by the KSZ9477 code, move them from the header into that code. Note that these functions will be soon replaced by regmap equivalents. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Inline ksz_spi.hMarek Vasut
The functions in the header file are static, and the header file is included from single C file, just inline the code into the C file. The bonus is that it's easier to spot further content to clean up. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Remove ksz_{get,set}()Marek Vasut
These functions and callbacks are never used, remove them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: dsa: microchip: Remove ksz_{read,write}24()Marek Vasut
These functions and callbacks are never used, remove them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27ath10k: add new hw_ops for sdio chipWen Gong
It report error message while suspend/resume test. dmesg log: [ 150.749962] ath10k_sdio mmc1:0001:1: hif read32 not supported [ 150.755728] ath10k_sdio mmc1:0001:1: failed to set coverage class: expected integer microsecond value in register Reason is sdio chip does not support set_coverage_class as well as pcie chip, remove the set_coverage_class handler will avoid it. callstack of the error message: OUTLINED_FUNCTION_6+0xc/0x14 [ath10k_core] ath10k_mac_op_set_coverage_class+0x2c/0x40 [ath10k_core] ieee80211_reconfig+0x5d0/0x108c [mac80211] ieee80211_resume+0x34/0x6c [mac80211] wiphy_resume+0xbc/0x13c [cfg80211] dpm_run_callback+0xa4/0x168 device_resume+0x1d4/0x200 async_resume+0x1c/0x34 async_run_entry_fn+0x48/0xf8 process_one_work+0x178/0x2f8 worker_thread+0x1d8/0x2cc kthread+0x11c/0x12c ret_from_fork+0x10/0x18 the error log will not happen after this patch applied. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27Merge branch 'net-aquantia-implement-vlan-offloads'David S. Miller
Igor Russkikh says: ==================== net: aquantia: implement vlan offloads This patchset introduces hardware VLAN offload support and also does some maintenance: we replace driver version with uts version string, add documentation file for atlantic driver, and update maintainers adding Igor as a maintainer. v3: shuffle doc sections, per Andrew's comments v2: updates in doc, gpl spdx tag cleanup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: implement vlan offload configurationIgor Russkikh
set_features should update flags and reinit hardware if vlan offload settings were changed. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: vlan offloads logic in datapathIgor Russkikh
Update datapath by adding logic related to hardware assisted vlan strip/insert behaviour. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: adding fields and device features for vlan offloadIgor Russkikh
Updating features and vlan_features with vlan HW offload. Added vlan_tag fields to rx/tx ring_buff to track vlan related data. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: added vlan offload related macros and functionsIgor Russkikh
Register declaration macros required to work with vlan offload mode. Tested-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: make all files GPL-2.0-onlyIgor Russkikh
It was noticed some files had -or-later, however overall driver has -only license. Clean this up. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27maintainers: declare aquantia atlantic driver maintenanceIgor Russkikh
Aquantia is resposible now for all new features and bugfixes. Reflect that in MAINTAINERS. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: add documentation for the atlantic driverIgor Russkikh
Document contains configuration options description, details and examples of driver various settings. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27net: aquantia: replace internal driver version code with utsIgor Russkikh
As it was discussed some time previously, driver is better to report kernel version string, as it in a best way identifies the codebase. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27wil6210: drop old event after wmi_call timeoutAhmad Masri
This change fixes a rare race condition of handling WMI events after wmi_call expires. wmi_recv_cmd immediately handles an event when reply_buf is defined and a wmi_call is waiting for the event. However, in case the wmi_call has already timed-out, there will be no waiting/running wmi_call and the event will be queued in WMI queue and will be handled later in wmi_event_handle. Meanwhile, a new similar wmi_call for the same command and event may be issued. In this case, when handling the queued event we got WARN_ON printed. Fixing this case as a valid timeout and drop the unexpected event. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: set WIL_WMI_CALL_GENERAL_TO_MS as wmi_call timeoutAhmad Masri
Replace all wmi_call timeouts that are less than 100 msec to use WIL_WMI_CALL_GENERAL_TO_MS (100 msec) as a default. Some of the current wmi_call timeouts are too short and fails to receive its waiting events. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: add support for reading multiple RFs temperature via debugfsTzahi Sabo
Base-band chips support multi RFs chips. Add support for reading multiple RFs temperature via debugfs. Signed-off-by: Tzahi Sabo <stzahi@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: publish max_msdu_size to FW on BCAST ringMaya Erez
Set max_msdu_size in WMI_BCAST_DESC_RING_ADD_CMD to allow FW to optimize the buffers allocation for bcast packets. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: update cid boundary check of wil_find_cid/_by_idx()Alexei Avshalom Lazar
The return value of wil_find_cid()/wil_find_cid_by_idx() is validated with the lower boundary value. Check the upper boundary value as well. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: clear FW and ucode log addressMaya Erez
Clear the FW and ucode log address on device initialization to allow user space app identify when the address was set by FW/ucode and it can start read. Signed-off-by: Tzahi Sabo <stzahi@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: fix printout in wil_read_pmccfgDedy Lansky
Replace sprintf with snprintf which checks the destination buffer size. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: Add support for setting RBUFCAP configurationAlexei Avshalom Lazar
RBUFCAP support added in FW. The RBUFCAP feature is amendment to the block ack mechanism to prevent overloading of the recipient’s memory space, which may happen in case the link speed is higher than STA’s capability to process or consume incoming data. The block ack policy (ba_policy) is now controlled by FW so driver should ignore this field. Add new debugfs "rbufcap" to configure RBUFCAP. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: increase the frequency of status ring hw tail updateAhmad Masri
The driver updates Tx status ring HW tail only after it finishes processing the whole status ring, while the HW is still transmitting from other transmit rings. This can cause back-pressure on HW if no status entries are available. Update HW tail of Tx status ring without waiting for the end of the processing to help feeding back the HW with status entries and to allow additional packet transmission. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: enlarge Tx status ring sizeAhmad Masri
With multiple clients and in high throughput scenarios, Tx status ring can get full and become a bottleneck in Tx transmission. Set the default Tx status ring size order to 13, previous value was 12. This will double the status ring size from 4K entries to 8K entries. Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27wil6210: do not reset FW in STA to P2P client interface switchAlexei Avshalom Lazar
Currently the FW is reset on every interface type change, because of various FW bugs. FW reset is not required when switching from STA to P2P client, hence can be skipped. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2019-06-26 This series contains updates to ixgbe and i40e only. Mauro S. M. Rodrigues update the ixgbe driver to handle transceivers who comply with SFF-8472 but do not implement the Digital Diagnostic Monitoring (DOM) interface. Update the driver to check the necessary bits to see if DOM is implemented before trying to read the additional 256 bytes in the EEPROM for DOM data. Young Xiao fixes a potential divide by zero issue in ixgbe driver. Aleksandr fixes i40e to recognize 2.5 and 5.0 GbE link speeds so that it is not reported as "Unknown bps". Fixes the driver to read the firmware LLDP agent status during DCB initialization, and to properly log the LLDP agent status to help with debugging when DCB fails to initialize. Martyna fixes i40e for the missing supported and advertised link modes information in ethtool. Jake fixes a function header comment that was incorrect for a PTP function in i40e. Maciej fixes an issue for i40e when a XDP program is loaded the descriptor count gets reset to the default value, resolve the issue by making the current descriptor count persistent across resets. Alice corrects a copyright date which she found to be incorrect. Piotr adds a log entry when the traffic class 0 is added or deleted, which was not being logged previously. Gustavo A. R. Silva updates i40e to use struct_size() where possible. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27wil6210: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Maya Erez <merez@codeaurora.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: wil6210@qti.qualcomm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27carl9170: remove dead branch in op_conf_tx callbackChristian Lamparter
This patch removes the error branch for (queue > ar->hw->queues). It is no longer needed anymore as the "queue" value is validated by cfg80211's parse_txq_params() before the driver code gets called. Some background: In the old days (linux 2.6 and early 3.x), the parse_txq_params() function did not verify the "queue" value. That's why these drivers had to do it. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27carl9170: fix misuse of device driver APIChristian Lamparter
This patch follows Alan Stern's recent patch: "p54: Fix race between disconnect and firmware loading" that overhauled carl9170 buggy firmware loading and driver unbinding procedures. Since the carl9170 code was adapted from p54 it uses the same functions and is likely to have the same problem, but it's just that the syzbot hasn't reproduce them (yet). a summary from the changes (copied from the p54 patch): * Call usb_driver_release_interface() rather than device_release_driver(). * Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. * During the firmware loading process, take a reference to the USB interface instead of the USB device. * Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). and * Make sure to prevent use-after-free bugs by explicitly setting the driver context to NULL after signaling the completion. Cc: <stable@vger.kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27ath9k: correctly handle short radar pulsesZefir Kurtisi
In commit 3c0efb745a17 ("ath9k: discard undersized packets") the lower bound of RX packets was set to 10 (min ACK size) to filter those that would otherwise be treated as invalid at mac80211. Alas, short radar pulses are reported as PHY_ERROR frames with length set to 3. Therefore their detection stopped working after that commit. NOTE: ath9k drivers built thereafter will not pass DFS certification. This extends the criteria for short packets to explicitly handle PHY_ERROR frames. Fixes: 3c0efb745a17 ("ath9k: discard undersized packets") Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27batman-adv: mcast: apply optimizations for routable packets, tooLinus Lüssing
Now that we not only track the presence of multicast listeners but also multicast routers we can safely apply group-aware multicast-to-unicast forwarding to packets with a destination address of scope greater than link-local as well. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-06-27batman-adv: mcast: detect, distribute and maintain multicast router presenceLinus Lüssing
To be able to apply our group aware multicast optimizations to packets with a scope greater than link-local we need to not only keep track of multicast listeners but also multicast routers. With this patch a node detects the presence of multicast routers on its segment by checking if /proc/sys/net/ipv{4,6}/conf/<bat0|br0(bat)>/mc_forwarding is set for one thing. This option is enabled by multicast routing daemons and needed for the kernel's multicast routing tables to receive and route packets. For another thing if a bridge is configured on top of bat0 then the presence of an IPv6 multicast router behind this bridge is currently detected by checking for an IPv6 multicast "All Routers Address" (ff02::2). This should later be replaced by querying the bridge, which performs proper, RFC4286 compliant Multicast Router Discovery (our simplified approach includes more hosts than necessary, most notably not just multicast routers but also unicast ones and is not applicable for IPv4). If no multicast router is detected then this is signalized via the new BATADV_MCAST_WANT_NO_RTR4 and BATADV_MCAST_WANT_NO_RTR6 multicast tvlv flags. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-06-27batman-adv: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because we don't care if debugfs works or not, this trickles back a bit so we can clean things up by making some functions return void instead of an error value that is never going to fail. Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [sven@narfation.org: drop unused variables] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-06-27batman-adv: mcast: avoid redundant multicast TT entries with bridgesLinus Lüssing
When a bridge is added on top of bat0 we set the WANT_ALL_UNSNOOPABLES flag. Which means we sign up for all traffic for ff02::1/128 and 224.0.0.0/24. When the node itself had IPv6 enabled or joined a group in 224.0.0.0/24 itself then so far this would result in a multicast TT entry which is redundant to the WANT_ALL_UNSNOOPABLES. With this patch such redundant TT entries are avoided. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-06-27batman-adv: mcast: collect softif listeners from IP lists insteadLinus Lüssing
Instead of collecting multicast MAC addresses from the netdev hw mc list collect a node's multicast listeners from the IP lists and convert those to MAC addresses. This allows to exclude addresses of specific scope later. On a multicast MAC address the IP destination scope is not visible anymore. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-06-27rtw88: refine flow to get tx power indexZong-Zhe Yang
Add a structure for power parameters including base, offset, limit and a function to get tx power parameters. Then, refine flow to get tx power index through the function. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27rtw88: remove all RTW_MAX_POWER_INDEX macroTzu-En Huang
Since this macro definition has different values in different chipset, the current defined macro value is for 8822b. This will cause the settings of 8822c be incorrect. Remove RTW_MAX_POWER_INDEX and use max_power_index in struct rtw_chip_info to make sure the value of different chipset is right. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27rtw88: update tx power limit table to RF v20Zong-Zhe Yang
Support more regulatory domains including IC, KCC, ACMA, CHILE, UKRAINE, and MEXICO. Corresponding tx power limits for these regulatory domains are added in tx power limit table. Besides, tx power limits in some case are also updated to follow RF v20 for better tx power indexes. Channel plan mapping table are upgraded to consider more 2G and 5G channel plans combination cases. It allow us to identify different situations more accuratly by channel plan IDs. In addition, mapping table for country code and channel plan ID and mapping table for country code and tx power limit are also updated to follow RF v20. It allow the new enrties in tx power limit table to be applied correctly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27rtw88: correct power limit selectionZong-Zhe Yang
If phy rate is decreased, sub bandwidth may be chosen by RA. We consider possible power limits and apply the min one; otherwise, the tx power index may be larger than spec. And we cross-reference power limits of vht and ht with 20/40M bandwidth in 5G to avoid values are not assigned. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27rtw88: choose the lowest as world-wide power limitYan-Hsuan Chuang
When we are loading tx power limit from the power limit table, compare the world-wide limit with the current limit and choose the lowest power limit for the world-wide power settings. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-27rtw88: fix incorrect tx power limit at 5GYan-Hsuan Chuang
Tx power limit is stored separately by 2G and 5G. But driver did not get tx power limit from 5G and causes incorrect tx power. Check if the channel is beyond 2G and get the corresponding tx power limit. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-23 10:48:28 +0000