summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-16nfp: don't check lack of RX/TX channelsJakub Kicinski
Core will now perform this check. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16ethtool: check if there is at least one channel for TX/RX in the coreJakub Kicinski
Having a channel config with no ability to RX or TX traffic is clearly wrong. Check for this in the core so the drivers don't have to. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16mptcp: Use 32-bit DATA_ACK when possibleChristoph Paasch
RFC8684 allows to send 32-bit DATA_ACKs as long as the peer is not sending 64-bit data-sequence numbers. The 64-bit DSN is only there for extreme scenarios when a very high throughput subflow is combined with a long-RTT subflow such that the high-throughput subflow wraps around the 32-bit sequence number space within an RTT of the high-RTT subflow. It is thus a rare scenario and we should try to use the 32-bit DATA_ACK instead as long as possible. It allows to reduce the TCP-option overhead by 4 bytes, thus makes space for an additional SACK-block. It also makes tcpdumps much easier to read when the DSN and DATA_ACK are both either 32 or 64-bit. Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16net: dsa: mt7530: fix roaming from DSA user portsDENG Qingfang
When a client moves from a DSA user port to a software port in a bridge, it cannot reach any other clients that connected to the DSA user ports. That is because SA learning on the CPU port is disabled, so the switch ignores the client's frames from the CPU port and still thinks it is at the user port. Fix it by enabling SA learning on the CPU port. To prevent the switch from learning from flooding frames from the CPU port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames, and let the switch flood them instead of trapping to the CPU port. Multicast frames still need to be trapped to the CPU port for snooping, so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames to disable SA learning. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16netns: enable to inherit devconf from current netnsNicolas Dichtel
The goal is to be able to inherit the initial devconf parameters from the current netns, ie the netns where this new netns has been created. This is useful in a containers environment where /proc/sys is read only. For example, if a pod is created with specifics devconf parameters and has the capability to create netns, the user expects to get the same parameters than his 'init_net', which is not the real init_net in this case. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16dpaa2-eth: add bulking to XDP_TXIoana Ciornei
Add driver level bulking to the XDP_TX action. An array of frame descriptors is held for each Tx frame queue and populated accordingly when the action returned by the XDP program is XDP_TX. The frames will be actually enqueued only when the array is filled. At the end of the NAPI cycle a flush on the queued frames is performed in order to enqueue the remaining FDs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16ipv6: Fix suspicious RCU usage warning in ip6mrMadhuparna Bhowmik
This patch fixes the following warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc4-next-20200507-syzkaller #0 Not tainted ----------------------------- net/ipv6/ip6mr.c:124 RCU-list traversed in non-reader section!! ipmr_new_table() returns an existing table, but there is no table at init. Therefore the condition: either holding rtnl or the list is empty is used. Fixes: d1db275dd3f6e ("ipv6: ip6mr: support multiple tables") Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "A new testcase for guest debugging (gdbstub) that exposed a bunch of bugs, mostly for AMD processors. And a few other x86 fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c KVM: SVM: Disable AVIC before setting V_IRQ KVM: Introduce kvm_make_all_cpus_request_except() KVM: VMX: pass correct DR6 for GD userspace exit KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6 KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6 KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on KVM: selftests: Add KVM_SET_GUEST_DEBUG test KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG KVM: x86: fix DR6 delivery for various cases of #DB injection KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
2020-05-16net: phy: broadcom: fix checkpatch complains about tabsKevin Lo
This patch makes checkpatch happy for tabs Signed-off-by: Kevin Lo <kevlo@kevlo.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16Merge tag 'powerpc-5.7-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for unrecoverable SLB faults in the interrupt exit path, introduced by the recent rewrite of interrupt exit in C. - Four fixes for our KUAP (Kernel Userspace Access Prevention) support on 64-bit. These are all fairly minor with the exception of the change to evaluate the get/put_user() arguments before we enable user access, which reduces the amount of code we run with user access enabled. - A fix for our secure boot IMA rules, if enforcement of module signatures is enabled at runtime rather than build time. - A fix to our 32-bit VDSO clock_getres() which wasn't falling back to the syscall for unknown clocks. - A build fix for CONFIG_PPC_KUAP_DEBUG on 32-bit BookS, and another for 40x. Thanks to: Christophe Leroy, Hugh Dickins, Nicholas Piggin, Aurelien Jarno, Mimi Zohar, Nayna Jain. * tag 'powerpc-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/40x: Make more space for system call exception powerpc/vdso32: Fallback on getres syscall when clock is unknown powerpc/32s: Fix build failure with CONFIG_PPC_KUAP_DEBUG powerpc/ima: Fix secure boot rules in ima arch policy powerpc/64s/kuap: Restore AMR in fast_interrupt_return powerpc/64s/kuap: Restore AMR in system reset exception powerpc/64/kuap: Move kuap checks out of MSR[RI]=0 regions of exit code powerpc/64s: Fix unrecoverable SLB crashes due to preemption check powerpc/uaccess: Evaluate macro arguments once, before user access is allowed
2020-05-16Merge tag 'csky-for-linus-5.7-rc6' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull csky updates from Guo Ren: - fix for copy_from/to_user (a hard-to-find bug, thx Viro) - fix for calltrace panic without FRAME_POINT - two fixes for perf - two build fixes - four fixes for non-fatal bugs (msa, rm dis_irq, cleanup psr, gdbmacros.txt) * tag 'csky-for-linus-5.7-rc6' of git://github.com/c-sky/csky-linux: csky: Fixup raw_copy_from_user() csky: Fixup gdbmacros.txt with name sp in thread_struct csky: Fixup remove unnecessary save/restore PSR code csky: Fixup remove duplicate irq_disable csky: Fixup calltrace panic csky: Fixup perf callchain unwind csky: Fixup msa highest 3 bits mask csky: Fixup perf probe -x hungup csky: Fixup compile error for abiv1 entry.S csky/ftrace: Fixup error when disable CONFIG_DYNAMIC_FTRACE
2020-05-16Merge tag 'arm-soc-fixes-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC/dt fixes from Arnd Bergmann: "This round of fixes is almost exclusively device tree changes, with trivial defconfig fixes and one compiler warning fix added in. A number of patches are to fix dtc warnings, in particular on Amlogic, i.MX and Rockchips. Other notable changes include: Renesas: - Fix a wrong clock configuration on R-Mobile A1 - Fix IOMMU support on R-Car V3H Allwinner - Multiple audio fixes Qualcomm - Use a safe CPU voltage on MSM8996 - Fixes to match a late audio driver change Rockchip: - Some fixes for the newly added Pinebook Pro NXP i.MX: - Fix I2C1 pinctrl configuration for i.MX27 phytec-phycard board - Fix imx6dl-yapp4-ursa board Ethernet connection OMAP: - A regression fix for non-existing can device on am534x-idk - Fix flakey wlan on droid4 where some devices would not connect at all because of internal pull being used with an external pull - Fix occasional missed wake-up events on droid4 modem uart" * tag 'arm-soc-fixes-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39 ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings arm64: defconfig: add MEDIA_PLATFORM_SUPPORT arm64: defconfig: ARCH_R8A7795: follow changed config symbol name arm64: defconfig: add DRM_DISPLAY_CONNECTOR arm64: defconfig: DRM_DUMB_VGA_DAC: follow changed config symbol name ARM: oxnas: make ox820_boot_secondary static ARM: dts: r8a7740: Add missing extal2 to CPG node ARM: dts: omap4-droid4: Fix occasional lost wakeirq for uart1 ARM: dts: omap4-droid4: Fix flakey wlan by disabling internal pull for gpio arm64: dts: allwinner: a64: Remove unused SPDIF sound card arm64: dts: allwinner: a64: pinetab: Fix cpvdd supply name arm64: dts: meson-g12: remove spurious blank line arm64: dts: meson-g12b-khadas-vim3: add missing frddr_a status property arm64: dts: meson-g12-common: fix dwc2 clock names arm64: dts: meson-g12b-ugoos-am6: fix usb vbus-supply arm64: dts: freescale: imx8mp: update input_val for AUDIOMIX_BIT_STREAM ARM: dts: r7s9210: Remove bogus clock-names from OSTM nodes ARM: dts: rockchip: fix pinctrl sub nodename for spi in rk322x.dtsi ...
2020-05-16Merge tag 'block-5.7-2020-05-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single NVMe pull in here, with a single fix for a missing DMA read memory barrier for completions" * tag 'block-5.7-2020-05-16' of git://git.kernel.dk/linux-block: nvme-pci: dma read memory barrier for completions
2020-05-16Merge tag 'pinctrl-v5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "A bunch of pin control fixes, some a bit overly ripe, sorry about that. We have important systems like Intel laptops and Qualcomm mobile chips covered. - Pad lock register on Intel Sunrisepoint had the wrong offset - Fix pin config setting for the Baytrail GPIO chip - Fix a compilation warning in the Mediatek driver - Fix a function group name in the Actions driver - Fix a behaviour bug in the edge polarity code in the Qualcomm driver - Add a missing spinlock in the Intel Cherryview driver - Add affinity callbacks to the Qualcomm MSMGPIO chip" * tag 'pinctrl-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chip pinctrl: cherryview: Add missing spinlock usage in chv_gpio_irq_handler pinctrl: qcom: fix wrong write in update_dual_edge pinctrl: actions: fix function group name for i2c0_group pinctrl: mediatek: remove shadow variable declaration pinctrl: baytrail: Enable pin configuration setting for GPIO chip pinctrl: sunrisepoint: Fix PAD lock register offset for SPT-H
2020-05-16Merge tag 'io_uring-5.7-2020-05-15' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two small fixes that should go into this release: - Check and handle zero length splice (Pavel) - Fix a regression in this merge window for fixed files used with polled block IO" * tag 'io_uring-5.7-2020-05-15' of git://git.kernel.dk/linux-block: io_uring: polled fixed file must go through free iteration io_uring: fix zero len do_splice()
2020-05-16soc: mediatek: cmdq: return send msg error codeDennis YC Hsieh
Return error code to client if send message fail, so that client has chance to error handling. Fixes: 576f1b4bc802 ("soc: mediatek: Add Mediatek CMDQ helper") Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://lore.kernel.org/r/1583664775-19382-6-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2020-05-16Merge branch 'nvme-5.7' of git://git.infradead.org/nvme into block-5.7Jens Axboe
Pull NVMe fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme-pci: dma read memory barrier for completions
2020-05-16drm/vmwgfx: Return true in function vmw_fence_obj_signaled()Jason Yan
Fix the following coccicheck warning: drivers/gpu/drm/vmwgfx/vmwgfx_fence.c:518:9-10: WARNING: return of 0/1 in function 'vmw_fence_obj_signaled' with return type bool Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-05-16drm/vmwgfx: remove redundant assignment to variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-05-16drm/vmwgfx: Fix parameter name in vmw_bo_initGuixiong Wei
The parameter name should be interruptible instead of interuptable. Signed-off-by: Guixiong Wei <guixiongwei@gmail.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-05-16drm/vmwgfx: update MAINTAINERS entryRoland Scheidegger
Maintainer switch from Thomas Hellstrom to Roland Scheidegger Reviewed-by: Charmaine Lee <charmainel@vmware.com> Reviewed-by: Neha Bhende <bhenden@vmware.com> Acked-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Roland Scheidegger <sroland@vmware.com>
2020-05-16bpf: Selftests, add ktls tests to test_sockmapJohn Fastabend
Until now we have only had minimal ktls+sockmap testing when being used with helpers and different sendmsg/sendpage patterns. Add a pass with ktls here. To run just ktls tests, $ ./test_sockmap --whitelist="ktls" Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939736278.15176.5435314315563203761.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, add blacklist to test_sockmapJohn Fastabend
This adds a blacklist to test_sockmap. For example, now we can run all apply and cork tests except those with timeouts by doing, $ ./test_sockmap --whitelist "apply,cork" --blacklist "hang" Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939734350.15176.6643981099665208826.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, add whitelist option to test_sockmapJohn Fastabend
Allow running specific tests with a comma deliminated whitelist. For example to run all apply and cork tests. $ ./test_sockmap --whitelist="cork,apply" Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939732464.15176.1959113294944564542.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, provide verbose option for selftests executionJohn Fastabend
Pass options from command line args into individual tests which allows us to use verbose option from command line with selftests. Now when verbose option is set individual subtest details will be printed. Also we can consolidate cgroup bring up and tear down. Additionally just setting verbose is very noisy so introduce verbose=1 and verbose=2. Really verbose=2 is only useful when developing tests or debugging some specific issue. For example now we get output like this with --verbose, #20/17 sockhash:txmsg test pull-data:OK [TEST 160]: (512, 1, 3, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 161]: (100, 1, 5, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 162]: (2, 1024, 256, sendpage, pop (4096,8192),): msg_loop_rx: iov_count 1 iov_buf 255 cnt 2 err 0 [TEST 163]: (512, 1, 3, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 164]: (100, 1, 5, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 165]: (512, 1, 3, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 166]: (100, 1, 5, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 [TEST 167]: (512, 1, 3, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0 [TEST 168]: (100, 1, 5, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0 Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939730412.15176.1975675235035143367.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, break down test_sockmap into subtestsJohn Fastabend
At the moment test_sockmap runs all 800+ tests ungrouped which is not ideal because it makes it hard to see what is failing but also more importantly its hard to confirm all cases are tested. Additionally, after inspecting we noticed the runtime is bloated because we run many duplicate tests. Worse some of these tests are known error cases that wait for the recvmsg handler to timeout which creats long delays. Also we noted some tests were not clearing their options and as a result the following tests would run with extra and incorrect options. Fix this by reorganizing test code so its clear what tests are running and when. Then it becomes easy to remove duplication and run tests with only the set of send/recv patterns that are relavent. To accomplish this break test_sockmap into subtests and remove unnecessary duplication. The output is more readable now and the runtime reduced. Now default output prints subtests like this, $ ./test_sockmap # 1/ 6 sockmap:txmsg test passthrough:OK ... #22/ 1 sockhash:txmsg test push/pop data:OK Pass: 22 Fail: 0 Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939728384.15176.13601520183665880762.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, improve test_sockmap total bytes counterJohn Fastabend
The recv thread in test_sockmap waits to receive all bytes from sender but in the case we use pop data it may wait for more bytes then actually being sent. This stalls the test harness for multiple seconds. Because this happens in multiple tests it slows time to run the selftest. Fix by doing a better job of accounting for total bytes when pop helpers are used. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939726542.15176.5964532245173539540.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, print error in test_sockmap error casesJohn Fastabend
Its helpful to know the error value if an error occurs. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939724566.15176.12079885932643225626.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, sockmap test prog run without setting cgroupJohn Fastabend
Running test_sockmap with arguments to specify a test pattern requires including a cgroup argument. Instead of requiring this if the option is not provided create one This is not used by selftest runs but I use it when I want to test a specific test. Most useful when developing new code and/or tests. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939722675.15176.6294210959489131688.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, remove prints from sockmap testsJohn Fastabend
The prints in the test_sockmap programs were only useful when we didn't have enough control over test infrastructure to know from user program what was being pushed into kernel side. Now that we have or will shortly have better test controls lets remove the printers. This means we can remove half the programs and cleanup bpf side. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939720756.15176.9806965887313279429.stgit@john-Precision-5820-Tower
2020-05-16bpf: Selftests, move sockmap bpf prog header into progsJohn Fastabend
Moves test_sockmap_kern.h into progs directory but does not change code at all. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/158939718921.15176.5766299102332077086.stgit@john-Precision-5820-Tower
2020-05-15Merge tag 'mlx5-updates-2020-05-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-05-15 mlx5 core and mlx5e (netdev) updates: 1) Two fixes for release all FW pages support. 2) Improvement in calculating the send queue stop room on tx 3) Flow steering auto-groups creation improvements 4) TC offload fix for Connection tracking with NAT action 5) IPoIB support for self looback to allow communication between ipoib pkey child interfaces on the same host. 6) DCBNL cleanup to avoid #ifdef DCBNL all over the main mlx5e code 7) Small and trivial code cleanup ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15ethernet: ti: am65-cpts: Add missing inline qualifier to stub functionsNathan Chancellor
When building with Clang: In file included from drivers/net/ethernet/ti/am65-cpsw-ethtool.c:15: drivers/net/ethernet/ti/am65-cpts.h:58:12: warning: unused function 'am65_cpts_ns_gettime' [-Wunused-function] static s64 am65_cpts_ns_gettime(struct am65_cpts *cpts) ^ drivers/net/ethernet/ti/am65-cpts.h:63:12: warning: unused function 'am65_cpts_estf_enable' [-Wunused-function] static int am65_cpts_estf_enable(struct am65_cpts *cpts, ^ drivers/net/ethernet/ti/am65-cpts.h:69:13: warning: unused function 'am65_cpts_estf_disable' [-Wunused-function] static void am65_cpts_estf_disable(struct am65_cpts *cpts, int idx) ^ 3 warnings generated. These functions need to be marked as inline, which adds __maybe_unused, to avoid these warnings, which is the pattern for stub functions. Fixes: ec008fa2a9e5 ("ethernet: ti: am65-cpts: add routines to support taprio offload") Link: https://github.com/ClangBuiltLinux/linux/issues/1026 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-16selftests/bpf: Move test_align under test_progsStanislav Fomichev
There is a much higher chance we can see the regressions if the test is part of test_progs. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200515194904.229296-2-sdf@google.com
2020-05-16selftests/bpf: Fix test_align verifier log patternsStanislav Fomichev
Commit 294f2fc6da27 ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()") changed the way verifier logs some of its state, adjust the test_align accordingly. Where possible, I tried to not copy-paste the entire log line and resorted to dropping the last closing brace instead. Fixes: 294f2fc6da27 ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200515194904.229296-1-sdf@google.com
2020-05-16libbpf, hashmap: Fix signedness warningsIan Rogers
Fixes the following warnings: hashmap.c: In function ‘hashmap__clear’: hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare] 150 | for (bkt = 0; bkt < map->cap; bkt++) \ hashmap.c: In function ‘hashmap_grow’: hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare] 150 | for (bkt = 0; bkt < map->cap; bkt++) \ Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200515165007.217120-4-irogers@google.com
2020-05-16libbpf, hashmap: Remove unused #includeIan Rogers
Remove #include of libbpf_internal.h that is unused. Discussed in this thread: https://lore.kernel.org/lkml/CAEf4BzZRmiEds_8R8g4vaAeWvJzPb4xYLnpF0X2VNY8oTzkphQ@mail.gmail.com/ Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200515165007.217120-3-irogers@google.com
2020-05-16bpf: Fix check_return_code to only allow [0,1] in trace_iter progsDaniel Borkmann
As per 15d83c4d7cef ("bpf: Allow loading of a bpf_iter program") we only allow a range of [0,1] for return codes. Therefore BPF_TRACE_ITER relies on the default tnum_range(0, 1) which is set in range var. On recent merge of net into net-next commit e92888c72fbd ("bpf: Enforce returning 0 for fentry/fexit progs") got pulled in and caused a merge conflict with the changes from 15d83c4d7cef. The resolution had a snall hiccup in that it removed the [0,1] range restriction again so that BPF_TRACE_ITER would have no enforcement. Fix it by adding it back. Fixes: da07f52d3caf ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2020-05-15net/mlx5e: Take DCBNL-related definitions into dedicated filesTariq Toukan
Take DCBNL-related definitions out of the common en.h header, Use a dedicated header file for exposing them. Some need not to be exposed, use them locally in the .c file. Use stubs to eliminate use of CONFIG_MLX5_CORE_EN_DCB in the generic control flows. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5e: Calculate SQ stop room in a robust wayMaxim Mikityanskiy
Currently, different formulas are used to estimate the space that may be taken by WQEs in the SQ during a single packet transmit. This space is called stop room, and it's checked in the end of packet transmit to find out if the next packet could overflow the SQ. If it could, the driver tells the kernel to stop sending next packets. Many factors affect the stop room: 1. Padding with NOPs to avoid WQEs spanning over page boundaries. 2. Enabled and disabled offloads (TLS, upcoming MPWQE). 3. The maximum size of a WQE. The padding is performed before every WQE if it doesn't fit the current page. The current formula assumes that only one padding will be required per packet, and it doesn't take into account that the WQEs posted during the transmission of a single packet might exceed the page size in very rare circumstances. For example, to hit this condition with 4096-byte pages, TLS offload will have to interrupt an almost-full MPWQE session, be in the resync flow and try to transmit a near to maximum amount of data. To avoid SQ overflows in such rare cases after MPWQE is added, this patch introduces a more robust formula to estimate the stop room. The new formula uses the fact that a WQE of size X will not require more than X-1 WQEBBs of padding. More exact estimations are possible, but they result in much more complex and error-prone code for little gain. Before this patch, the TLS stop room included space for both INNOVA and ConnectX TLS offloads that couldn't run at the same time anyway, so this patch accounts only for the active one. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5e: IPoIB, Drop multicast packets that this interface sentErez Shitrit
After enabled loopback packets for IPoIB, we need to drop these packets that this HCA has replicated and came back to the same interface that sent them. Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5e: IPoIB, Enable loopback packets for IPoIB interfacesErez Shitrit
Enable loopback of unicast and multicast traffic for IPoIB enhanced mode. This will allow interfaces with the same pkey to communicate between them e.g cloned interfaces that located in different namespaces. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5e: CT: Fix offload with CT action after CT NAT actionRoi Dayan
It could be a chain of rules will do action CT again after CT NAT Before this fix matching will break as we get into the CT table after NAT changes and not CT NAT. Fix this by adding pre ct and pre ct nat tables to skip ct/ct_nat tables and go straight to post_ct table if ct/nat was already done. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5: Move internal timer read function to clock libraryEran Ben Elisha
Move mlx5_read_internal_timer() into lib/clock.c file as it is being used there. As such, make this function a static one. In addition, rearrange headers include to support function move. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5: Wait for inactive autogroupsPaul Blakey
Currently, if one thread tries to add an entry to an autogrouped table with no free matching group, while another thread is in the process of creating a new matching autogroup, it doesn't wait for the new group creation, and creates an unnecessary new autogroup. Instead of skipping inactive, wait on the write lock of those groups. Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5: Drain wq first during PCI device removalParav Pandit
mlx5_unload_one() is done with cleanup = true only once. So instead of doing health wq drain inside the if(), directly do during PCI device removal. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5: Have single error unwinding pathParav Pandit
Having multiple error unwinding path are error prone. Lets have just one error unwinding path. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5: Fix a bug of releasing wrong chunks on > 4K page size systemsEran Ben Elisha
On systems with page size larger than 4K, a fwp object has few 4K chunks. Fix a bug in fwp free flow where the chunk address was dropped and fwp->addr was used instead (first chunk address). This caused a wrong update of fwp->bitmask which later can cause errors in re-alloc fwp chunk flow. In order to fix this it, re-factor the release flow: - Free 4k: Releases a specific 4k chunk inside the fwp, defined by starting address. - Free fwp: Unconditionally release the whole fwp and its resources. Free addr will call free fwp if all chunks were released, in order to do code sharing. In addition, fix npages to count for all released chunks correctly. Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15net/mlx5: Dedicate fw page to the requesting functionEran Ben Elisha
The cited patch assumes that all chuncks in a fw page belong to the same function, thus the driver must dedicate fw page to the requesting function, which is actually what was intedned in the original fw pages allocator design, hence the fwp->func_id ! Up until the cited patch everything worked ok, but now "relase all pages" is broken on systems with page_size > 4k. Fix this by dedicating fw page to the requesting function id via adding a func_id parameter to alloc_4k() function. Fixes: c6168161f693 ("net/mlx5: Add support for release all pages event") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-05-15Merge tag 'renesas-fixes-for-v5.7-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.7 (take two) - Fix a wrong clock configuration on R-Mobile A1, - Minor fixes that are fast-tracked to avoid introducing regressions during conversion of DT bindings to json-schema. * tag 'renesas-fixes-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39 ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindings arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindings ARM: dts: r8a7740: Add missing extal2 to CPG node Link: https://lore.kernel.org/r/20200515125043.22811-1-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-22 01:34:04 +0000