summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-13gpiolib: notify user-space about line status changes after flags are setBartosz Golaszewski
Currently we emit the REQUESTED line state event after the line is requested but before the flags are configured. This is obviously wrong as we want to pass the updated lineinfo to user-space together with the event. Since the flags can be configured in different ways depending on how the line is being requested - we need to call the notifier chain in different places separately. Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-05-13hwmon: (nct7904) Fix incorrect range of temperature limit registersAmy Shih
The format of temperature limitation registers are 8-bit 2's complement and the range is -128~127. Converts the reading value to signed char to fix the incorrect range of temperature limitation registers. Signed-off-by: Amy Shih <amy.shih@advantech.com.tw> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-13hwmon: (nct7904) Read all SMI status registers in probe functionAmy Shih
When nct7904 power up, it compares current sensor readings against the default threshold immediately. This results in false alarms on startup. Read all SMI status registers in probe function to clear the alarms. Signed-off-by: Amy Shih <amy.shih@advantech.com.tw> [groeck: Reworded description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-05-13NFS/pnfs: Don't use RPC_TASK_CRED_NOREF with pnfsTrond Myklebust
When we're doing pnfs then the credential being used for the RPC call is not necessarily the same as the one used in the open context, so don't use RPC_TASK_CRED_NOREF. Fixes: 612965072020 ("NFSv4: Avoid referencing the cred unnecessarily during NFSv4 I/O") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2020-05-13usb: typec: mux: intel: Fix DP_HPD_LVL bit fieldPrashant Malani
According to the PMC Type C Subsystem (TCSS) Mux programming guide rev 0.6, the PMC HPD request LVL bit field is bit 4. Fix the definition here to match the programming guide. Since this bit field is changing, explicitly define a field for the HPD_HIGH mode data bit. Signed-off-by: Prashant Malani <pmalani@chromium.org> Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control") Reviewed-by: Benson Leung <bleung@chromium.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200511091837.102508-1-pmalani@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13Merge tag 'fixes-for-v5.7-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.7-rc5 Fixing raw-gadget's IOCTL return value. Enabling EXTCON for Intel Merrifield. Couple leaks have been plugged in net2272 and twl6030-usb. Returning an error code when things fail in cdc and ncm legacy gadgets. An old bug on dwc3 regarding HWO bit handling has been fixed. Apart from these, some minor fixes. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'fixes-for-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: raw-gadget: fix return value of ep read ioctls usb: dwc3: select USB_ROLE_SWITCH usb: gadget: legacy: fix error return code in gncm_bind() usb: gadget: legacy: fix error return code in cdc_bind() usb: gadget: legacy: fix redundant initialization warnings usb: gadget: tegra-xudc: Fix idle suspend/resume usb: gadget: net2272: Fix a memory leak in an error handling path in 'net2272_plat_probe()' usb: phy: twl6030-usb: Fix a resource leak in an error handling path in 'twl6030_usb_probe()' usb: cdns3: gadget: prev_req->trb is NULL for ep0 usb: gadget: audio: Fix a missing error return value in audio_bind() usb: dwc3: pci: Enable extcon driver for Intel Merrifield dwc3: Remove check for HWO flag in dwc3_gadget_ep_reclaim_trb_sg()
2020-05-13staging: wfx: unlock on error pathDan Carpenter
We need to release the tx_lock on the error path before returning. Fixes: d1c015b4ef6f ("staging: wfx: rewrite wfx_hw_scan()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20200512083656.GA251760@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13staging: greybus: Fix uninitialized scalar variableOscar Carter
In the "gb_tty_set_termios" function the "newline" variable is declared but not initialized. So the "flow_control" member is not initialized and the OR / AND operations with itself results in an undefined value in this member. The purpose of the code is to set the flow control type, so remove the OR / AND self operator and set the value directly. Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable") Fixes: e55c25206d5c9 ("greybus: uart: Handle CRTSCTS flag in termios") Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200510101426.23631-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13staging: kpc2000: fix error return code in kp2000_pcie_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Also removed var 'rv' since we can use 'err' instead. Fixes: 7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200506134735.102041-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-13dmaengine: dmatest: Restore default for channelVladimir Murzin
In case of dmatest is built-in and no channel was configured test doesn't run with: dmatest: Could not start test, no channels configured Even though description to "channel" parameter claims that default is any. Add default channel back as it used to be rather than reject test with no channel configuration. Fixes: d53513d5dc285d9a95a534fc41c5c08af6b60eac ("dmaengine: dmatest: Add support for multi channel testing) Reported-by: Dijil Mohan <Dijil.Mohan@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Link: https://lore.kernel.org/r/20200429071522.58148-1-vladimir.murzin@arm.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-13drm/meson: pm resume add return errno branchBernard Zhao
pm_resump api did not handle drm_mode_config_helper_resume error. This change add handle to return drm_mode_config_helper_resume`s error number. This code logic is aligned with api pm_suspend. After this change, the code maybe a bit readable. Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428131747.2099-1-bernard@vivo.com
2020-05-13csky: Fixup remove unnecessary save/restore PSR codeGuo Ren
All processes' PSR could success from SETUP_MMU, so need set it in INIT_THREAD again. And use a3 instead of r7 in __switch_to for code convention. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-13csky: Fixup remove duplicate irq_disableLiu Yibin
Interrupt has been disabled in __schedule() with local_irq_disable() and enabled in finish_task_switch->finish_lock_switch() with local_irq_enabled(), So needn't to disable irq here. Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-13csky: Fixup calltrace panicGuo Ren
The implementation of show_stack will panic with wrong fp: addr = *fp++; because the fp isn't checked properly. The current implementations of show_stack, wchan and stack_trace haven't been designed properly, so just deprecate them. This patch is a reference to riscv's way, all codes are modified from arm's. The patch is passed with: - cat /proc/<pid>/stack - cat /proc/<pid>/wchan - echo c > /proc/sysrq-trigger Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-13csky: Fixup perf callchain unwindMao Han
[ 5221.974084] Unable to handle kernel paging request at virtual address 0xfffff000, pc: 0x8002c18e [ 5221.985929] Oops: 00000000 [ 5221.989488] [ 5221.989488] CURRENT PROCESS: [ 5221.989488] [ 5221.992877] COMM=callchain_test PID=11962 [ 5221.995213] TEXT=00008000-000087e0 DATA=00009f1c-0000a018 BSS=0000a018-0000b000 [ 5221.999037] USER-STACK=7fc18e20 KERNEL-STACK=be204680 [ 5221.999037] [ 5222.003292] PC: 0x8002c18e (perf_callchain_kernel+0x3e/0xd4) [ 5222.007957] LR: 0x8002c198 (perf_callchain_kernel+0x48/0xd4) [ 5222.074873] Call Trace: [ 5222.074873] [<800a248e>] get_perf_callchain+0x20a/0x29c [ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80 [ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8 [ 5222.074873] [<8009de6e>] perf_event_output_forward+0x36/0x98 [ 5222.074873] [<800497e0>] search_exception_tables+0x20/0x44 [ 5222.074873] [<8002cbb6>] do_page_fault+0x92/0x378 [ 5222.074873] [<80098608>] __perf_event_overflow+0x54/0xdc [ 5222.074873] [<80098778>] perf_swevent_hrtimer+0xe8/0x164 [ 5222.074873] [<8002ddd0>] update_mmu_cache+0x0/0xd8 [ 5222.074873] [<8002c014>] user_backtrace+0x58/0xc4 [ 5222.074873] [<8002c0b4>] perf_callchain_user+0x34/0xd0 [ 5222.074873] [<800a2442>] get_perf_callchain+0x1be/0x29c [ 5222.074873] [<8009d964>] perf_callchain+0x64/0x80 [ 5222.074873] [<8009d834>] perf_output_sample+0x78c/0x858 [ 5222.074873] [<8009dc1c>] perf_prepare_sample+0x29c/0x4b8 [ 5222.074873] [<8009de94>] perf_event_output_forward+0x5c/0x98 [ 5222.097846] [ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c [ 5222.097846] [<8006c874>] hrtimer_interrupt+0x104/0x2ec [ 5222.097846] [<800a0300>] perf_event_exit_task+0x58/0x43c [ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c [ 5222.097846] [<8006c770>] hrtimer_interrupt+0x0/0x2ec [ 5222.097846] [<8005f2e4>] __handle_irq_event_percpu+0xac/0x19c [ 5222.097846] [<80437bb6>] dw_apb_clockevent_irq+0x2a/0x4c [ 5222.097846] [<8005f408>] handle_irq_event_percpu+0x34/0x88 [ 5222.097846] [<8005f480>] handle_irq_event+0x24/0x64 [ 5222.097846] [<8006218c>] handle_level_irq+0x68/0xdc [ 5222.097846] [<8005ec76>] __handle_domain_irq+0x56/0xa8 [ 5222.097846] [<80450e90>] ck_irq_handler+0xac/0xe4 [ 5222.097846] [<80029012>] csky_do_IRQ+0x12/0x24 [ 5222.097846] [<8002a3a0>] csky_irq+0x70/0x80 [ 5222.097846] [<800ca612>] alloc_set_pte+0xd2/0x238 [ 5222.097846] [<8002ddd0>] update_mmu_cache+0x0/0xd8 [ 5222.097846] [<800a0340>] perf_event_exit_task+0x98/0x43c The original fp check doesn't base on the real kernal stack region. Invalid fp address may cause kernel panic. Signed-off-by: Mao Han <han_mao@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-13csky: Fixup msa highest 3 bits maskLiu Yibin
Just as comment mentioned, the msa format: cr<30/31, 15> MSA register format: 31 - 29 | 28 - 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 BA Reserved SH WA B SO SEC C D V So we should shift 29 bits not 28 bits for mask Signed-off-by: Liu Yibin <jiulong@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-13csky: Fixup perf probe -x hungupGuo Ren
case: # perf probe -x /lib/libc-2.28.9000.so memcpy # perf record -e probe_libc:memcpy -aR sleep 1 System hangup and cpu get in trap_c loop, because our hardware singlestep state could still get interrupt signal. When we get in uprobe_xol singlestep slot, we should disable irq in pt_regs->psr. And is_swbp_insn() need a csky arch implementation with a low 16bit mask. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-13csky: Fixup compile error for abiv1 entry.SGuo Ren
This bug is from uprobe signal definition in thread_info.h. The instruction (andi) of abiv1 immediate is smaller than abiv2, then it will cause: AS arch/csky/kernel/entry.o arch/csky/kernel/entry.S: Assembler messages: arch/csky/kernel/entry.S:224: Error: Operand 2 immediate is overflow. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-13csky/ftrace: Fixup error when disable CONFIG_DYNAMIC_FTRACEGuo Ren
When CONFIG_DYNAMIC_FTRACE is enabled, static ftrace will fail to boot up and compile. It's a carelessness when developing "dynamic ftrace" and "ftrace with regs". Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-05-13iommu/amd: Fix get_acpihid_device_id()Raul E Rangel
acpi_dev_hid_uid_match() expects a null pointer for UID if it doesn't exist. The acpihid_map_entry contains a char buffer for holding the UID. If no UID was provided in the IVRS table, this buffer will be zeroed. If we pass in a null string, acpi_dev_hid_uid_match() will return false because it will try and match an empty string to the ACPI UID of the device. Fixes: ae5e6c6439c3 ("iommu/amd: Switch to use acpi_dev_hid_uid_match()") Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200511103229.v2.1.I6f1b6f973ee6c8af1348611370c73a0ec0ea53f1@changeid Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-13iommu/amd: Fix over-read of ACPI UID from IVRS tableAlexander Monakov
IVRS parsing code always tries to read 255 bytes from memory when retrieving ACPI device path, and makes an assumption that firmware provides a zero-terminated string. Both of those are bugs: the entry is likely to be shorter than 255 bytes, and zero-termination is not guaranteed. With Acer SF314-42 firmware these issues manifest visibly in dmesg: AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2\xf0\xa5, rdevid:160 AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3>\x83e\x8d\x9a\xd1... The first three lines show how the code over-reads adjacent table entries into the UID, and in the last line it even reads garbage data beyond the end of the IVRS table itself. Since each entry has the length of the UID (uidl member of ivhd_entry struct), use that for memcpy, and manually add a zero terminator. Avoid zero-filling hid and uid arrays up front, and instead ensure the uid array is always zero-terminated. No change needed for the hid array, as it was already properly zero-terminated. Fixes: 2a0cb4e2d423c ("iommu/amd: Add new map for storing IVHD dev entry type HID") Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Link: https://lore.kernel.org/r/20200511102352.1831-1-amonakov@ispras.ru Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-13ovl: potential crash in ovl_fid_to_fh()Dan Carpenter
The "buflen" value comes from the user and there is a potential that it could be zero. In do_handle_to_path() we know that "handle->handle_bytes" is non-zero and we do: handle_dwords = handle->handle_bytes >> 2; So values 1-3 become zero. Then in ovl_fh_to_dentry() we do: int len = fh_len << 2; So now len is in the "0,4-128" range and a multiple of 4. But if "buflen" is zero it will try to copy negative bytes when we do the memcpy in ovl_fid_to_fh(). memcpy(&fh->fb, fid, buflen - OVL_FH_WIRE_OFFSET); And that will lead to a crash. Thanks to Amir Goldstein for his help with this patch. Fixes: cbe7fba8edfc ("ovl: make sure that real fid is 32bit aligned in memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Cc: <stable@vger.kernel.org> # v5.5 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-05-13libbpf: Fix probe code to return EPERM if encounteredEelco Chaudron
When the probe code was failing for any reason ENOTSUP was returned, even if this was due to not having enough lock space. This patch fixes this by returning EPERM to the user application, so it can respond and increase the RLIMIT_MEMLOCK size. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/158927424896.2342.10402475603585742943.stgit@ebuild
2020-05-13selftests/bpf: Install generated test progsYauheni Kaliuta
Before commit 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule") selftests/bpf used generic install target from selftests/lib.mk to install generated bpf test progs by mentioning them in TEST_GEN_FILES variable. Take that functionality back. Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule") Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200513021722.7787-1-yauheni.kaliuta@redhat.com
2020-05-13Bluetooth: L2CAP: add support for waiting disconnection respArchie Pusaka
Whenever we disconnect a L2CAP connection, we would immediately report a disconnection event (EPOLLHUP) to the upper layer, without waiting for the response of the other device. This patch offers an option to wait until we receive a disconnection response before reporting disconnection event, by using the "how" parameter in l2cap_sock_shutdown(). Therefore, upper layer can opt to wait for disconnection response by shutdown(sock, SHUT_WR). This can be used to enforce proper disconnection order in HID, where the disconnection of the interrupt channel must be complete before attempting to disconnect the control channel. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Handle Inquiry Cancel error after Inquiry CompleteSonny Sasaka
After sending Inquiry Cancel command to the controller, it is possible that Inquiry Complete event comes before Inquiry Cancel command complete event. In this case the Inquiry Cancel command will have status of Command Disallowed since there is no Inquiry session to be cancelled. This case should not be treated as error, otherwise we can reach an inconsistent state. Example of a btmon trace when this happened: < HCI Command: Inquiry Cancel (0x01|0x0002) plen 0 > HCI Event: Inquiry Complete (0x01) plen 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 Inquiry Cancel (0x01|0x0002) ncmd 1 Status: Command Disallowed (0x0c) Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: serdev: Constify serdev_device_opsRikard Falkeborn
serdev_device_ops is not modified and can be const. Also, remove the unneeded declaration of it. Output from the file command before and after: Before: text data bss dec hex filename 7192 2408 192 9792 2640 drivers/bluetooth/hci_serdev.o After: text data bss dec hex filename 7256 2344 192 9792 2640 drivers/bluetooth/hci_serdev.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: btusb: Add support for Intel Bluetooth Device Typhoon Peak ↵Raghuram Hegde
(8087:0032) Device from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=13 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0032 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Raghuram Hegde <raghuram.hegde@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Amit K Bag <amit.k.bag@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: btusb: Implement hdev->prevent_wakeAbhishek Pandit-Subedi
Implement the prevent_wake hook by checking device_may_wakeup on the usb interface. This prevents the Bluetooth core from enabling scanning when the device isn't expected to wake from suspend. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Add hook for driver to prevent wake from suspendAbhishek Pandit-Subedi
Let drivers have a hook to disable configuring scanning during suspend. Drivers should use the device_may_wakeup function call to determine whether hci should be configured for wakeup. For example, an implementation for btusb may look like the following: bool btusb_prevent_wake(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); return !device_may_wakeup(&data->udev->dev); } Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Rename BT_SUSPEND_COMPLETEAbhishek Pandit-Subedi
Renamed BT_SUSPEND_COMPLETE to BT_SUSPEND_CONFIGURE_WAKE since it sets up the event filter and whitelist for wake-up. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Modify LE window and interval for suspendAbhishek Pandit-Subedi
When a device is suspended, it doesn't need to be as responsive to connection events. Increase the interval to 640ms (creating a duty cycle of roughly 1.75%) so that passive scanning uses much less power (vs previous duty cycle of 18.75%). The new window + interval combination has been tested to work with HID devices (which are currently the only devices capable of wake up). Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Fix incorrect type for window and intervalAbhishek Pandit-Subedi
The types for window and interval should be uint16, not uint8. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-12clk: ti: clkctrl: convert subclocks to use proper names alsoTero Kristo
Addition of the new internal API to get the clkctrl names missed adding the same conversion in place for the subclocks. This leads into missed parent/child relationships (i.e. orphaned clocks) with mixed node name handling, for example with omap4/omap5 where the l4_per clocks are using new naming, but rest are using old. Fix by converting the subclock registration to pick correct names for the clocks also. Fixes: 6c3090520554 ("clk: ti: clkctrl: Fix hidden dependency to node name") Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lkml.kernel.org/r/20200430083451.8562-1-t-kristo@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-12clk: ti: am33xx: fix RTC clock parentTero Kristo
Right now, trying to use RTC purely with the ti-sysc / clkctrl framework fails to enable the RTC module properly. Based on experimentation, this appears to be because RTC is sourced from the clkdiv32k optional clock. TRM is not very clear on this topic, but fix the RTC to use the proper source clock nevertheless. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lkml.kernel.org/r/20200424152301.4018-1-t-kristo@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-12clk: ti: clkctrl: Fix Bad of_node_put within clkctrl_get_nameTero Kristo
clkctrl_get_name incorrectly calls of_node_put when it is not really doing of_node_get. This causes a boot time warning later on: [ 0.000000] OF: ERROR: Bad of_node_put() on /ocp/interconnect@4a000000/segmen t@0/target-module@5000/cm_core_aon@0/ipu-cm@500/ipu1-clkctrl@20 Fix by dropping the of_node_put from the function. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 6c3090520554 ("clk: ti: clkctrl: Fix hidden dependency to node name") Signed-off-by: Tero Kristo <t-kristo@ti.com> Link: https://lkml.kernel.org/r/20200424124725.9895-1-t-kristo@ti.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-12netlabel: cope with NULL catmapPaolo Abeni
The cipso and calipso code can set the MLS_CAT attribute on successful parsing, even if the corresponding catmap has not been allocated, as per current configuration and external input. Later, selinux code tries to access the catmap if the MLS_CAT flag is present via netlbl_catmap_getlong(). That may cause null ptr dereference while processing incoming network traffic. Address the issue setting the MLS_CAT flag only if the catmap is really allocated. Additionally let netlbl_catmap_getlong() cope with NULL catmap. Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com> Fixes: 4b8feff251da ("netlabel: fix the horribly broken catmap functions") Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12net: dsa: tag_sja1105: appease sparse checks for ethertype accessorsVladimir Oltean
A comparison between a value from the packet and an integer constant value needs to be done by converting the value from the packet from net->host, or the constant from host->net. Not the other way around. Even though it makes no practical difference, correct that. Fixes: 38b5beeae7a4 ("net: dsa: sja1105: prepare tagger for handling DSA tags and VLAN simultaneously") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMUKefeng Wang
HUGETLBFS only used when MMU enabled, add the dependency. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMUKefeng Wang
DEBUG_VIRTUAL should only used when MMU enabled, add the dependence. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12riscv: Add pgprot_writecombine/device and PAGE_SHARED defination if NOMMUKefeng Wang
Some drivers use PAGE_SHARED, pgprot_writecombine()/pgprot_device(), add the defination to fix build error if NOMMU. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12riscv: stacktrace: Fix undefined reference to `walk_stackframe'Kefeng Wang
Drop static declaration to fix following build error if FRAME_POINTER disabled, riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0': perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe' Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12Merge tag 'v5.7-rockchip-clk-fixes1' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Pull one Rockchip clk fix from Heiko Stuebner: - Fix for wrongly defines rk3228 aclk_gpu* * tag 'v5.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks
2020-05-12riscv: Fix unmet direct dependencies built based on SOC_VIRTKefeng Wang
Fix unmet direct dependencies Warning and fix Kconfig indent. WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SOC_VIRT [=y] WARNING: unmet direct dependencies detected for POWER_RESET_SYSCON_POWEROFF Depends on [n]: POWER_RESET [=n] && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SOC_VIRT [=y] WARNING: unmet direct dependencies detected for RTC_DRV_GOLDFISH Depends on [n]: RTC_CLASS [=n] && OF [=y] && HAS_IOMEM [=y] && (GOLDFISH [=y] || COMPILE_TEST [=n]) Selected by [y]: - SOC_VIRT [=y] Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12clk: tegra: Fix initial rate for pll_a on Tegra124Thierry Reding
pll_a_out0 and the I2S clocks are already configured to default to rates corresponding to a 44.1 kHz sampling rate, but the pll_a configuration was set to a default that is not listed in the frequency table, which caused the PLL code to compute an invalid configuration. As a result of this invalid configuration, Jetson TK1 fails to resume from suspend. This used to get papered over because the ASoC driver would force audio clocks to a 44.1 kHz configuration on boot. However, that's not really necessary and was hence removed in commit ff5d18cb04f4 ("ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()"). Fix the initial rate for pll_a so that it matches the 44.1 kHz entry in the pll_a frequency table. Fixes: ff5d18cb04f4 ("ASoC: tegra: Enable audio mclk during tegra_asoc_utils_init()") Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lkml.kernel.org/r/20200505071655.644773-1-thierry.reding@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-12riscv: perf: RISCV_BASE_PMU should be independentKefeng Wang
Selecting PERF_EVENTS without selecting RISCV_BASE_PMU results in a build error. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> [Palmer: commit text] Fixes: 178e9fc47aae("perf: riscv: preliminary RISC-V support") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-05-12x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot upSteven Rostedt (VMware)
Booting one of my machines, it triggered the following crash: Kernel/User page tables isolation: enabled ftrace: allocating 36577 entries in 143 pages Starting tracer 'function' BUG: unable to handle page fault for address: ffffffffa000005c #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061 Oops: 0003 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 RIP: 0010:text_poke_early+0x4a/0x58 Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff 0 41 57 49 RSP: 0000:ffffffff82003d38 EFLAGS: 00010046 RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005 RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0 R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0 R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0 FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0 Call Trace: text_poke_bp+0x27/0x64 ? mutex_lock+0x36/0x5d arch_ftrace_update_trampoline+0x287/0x2d5 ? ftrace_replace_code+0x14b/0x160 ? ftrace_update_ftrace_func+0x65/0x6c __register_ftrace_function+0x6d/0x81 ftrace_startup+0x23/0xc1 register_ftrace_function+0x20/0x37 func_set_flag+0x59/0x77 __set_tracer_option.isra.19+0x20/0x3e trace_set_options+0xd6/0x13e apply_trace_boot_options+0x44/0x6d register_tracer+0x19e/0x1ac early_trace_init+0x21b/0x2c9 start_kernel+0x241/0x518 ? load_ucode_intel_bsp+0x21/0x52 secondary_startup_64+0xa4/0xb0 I was able to trigger it on other machines, when I added to the kernel command line of both "ftrace=function" and "trace_options=func_stack_trace". The cause is the "ftrace=function" would register the function tracer and create a trampoline, and it will set it as executable and read-only. Then the "trace_options=func_stack_trace" would then update the same trampoline to include the stack tracer version of the function tracer. But since the trampoline already exists, it updates it with text_poke_bp(). The problem is that text_poke_bp() called while system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not the page mapping, as it would think that the text is still read-write. But in this case it is not, and we take a fault and crash. Instead, lets keep the ftrace trampolines read-write during boot up, and then when the kernel executable text is set to read-only, the ftrace trampolines get set to read-only as well. Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Fixes: 768ae4406a5c ("x86/ftrace: Use text_poke()") Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-12ARM: dts: Fix wrong mdio clock for dm814xTony Lindgren
Recent PTP-specific cpsw driver changes started exposing an issue on at at least j5eco-evm: Unhandled fault: external abort on non-linefetch (0x1008) at 0xf0169004 ... (davinci_mdio_runtime_suspend) from [<c063f2a4>] (__rpm_callback+0x84/0x154) (__rpm_callback) from [<c063f394>] (rpm_callback+0x20/0x80) (rpm_callback) from [<c063f4f0>] (rpm_suspend+0xfc/0x6ac) (rpm_suspend) from [<c0640af0>] (pm_runtime_work+0x88/0xa4) (pm_runtime_work) from [<c0155338>] (process_one_work+0x228/0x568) ... Let's fix the issue by using the correct mdio clock as suggested by Grygorii Strashko <grygorii.strashko@ti.com>. The DM814_ETHERNET_CPGMAC0_CLKCTRL clock is the interconnect target module clock and managed by ti-sysc. Fixes: 6398f3478e45 ("ARM: dts: Configure interconnect target module for dm814x cpsw") Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-05-12erspan: Check IFLA_GRE_ERSPAN_VER is set.William Tu
Add a check to make sure the IFLA_GRE_ERSPAN_VER is provided by users. Fixes: f989d546a2d5 ("erspan: Add type I version 0 support.") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: William Tu <u9012063@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12Merge branch 'Traffic-support-for-dsa_8021q-in-vlan_filtering-1-mode'David S. Miller
Vladimir Oltean says: ==================== Traffic support for dsa_8021q in vlan_filtering=1 mode This series is an attempt to support as much as possible in terms of traffic I/O from the network stack with the only dsa_8021q user thus far, sja1105. The hardware doesn't support pushing a second VLAN tag to packets that are already tagged, so our only option is to combine the dsa_8021q with the user tag into a single tag and decode that on the CPU. The assumption is that there is a type of use cases for which 7 VLANs per port are more than sufficient, and that there's another type of use cases where the full 4096 entries are barely enough. Those use cases are very different from one another, so I prefer trying to give both the best experience by creating this best_effort_vlan_filtering knob to select the mode in which they want to operate in. v2 was submitted here: https://patchwork.ozlabs.org/project/netdev/cover/20200511135338.20263-1-olteanv@gmail.com/ v1 was submitted here: https://patchwork.ozlabs.org/project/netdev/cover/20200510164255.19322-1-olteanv@gmail.com/ Changes in v3: Patch 01/15: - Rename again to configure_vlan_while_not_filtering, and add a helper function for skipping VLAN configuration. Patch 03/15: - Remove sja1105_can_use_vlan_as_tags from driver code. Patch 06/15: - Adapt sja1105 driver to the second variable name change. Patch 08/15: - Provide an implementation of sja1105_can_use_vlan_as_tags as part of the tagger and not as part of the switch driver. So we have to look at the skb only, and not at the VLAN awareness state. Changes in v2: Patch 01/15: - Rename variable from vlan_bridge_vtu to configure_vlans_while_disabled. Patch 03/15: - Be much more thorough, and make sure that things like virtual links and FDB operations still work properly. Patch 05/15: - Free the vlan lists on teardown. - Simplify sja1105_classify_vlan: only look at priv->expect_dsa_8021q. - Keep vid 1 in the list of dsa_8021q VLANs, to make sure that untagged packets transmitted from the stack, like PTP, continue to work in VLAN-unaware mode. Patch 06/15: - Adapt to vlan_bridge_vtu variable name change. Patch 11/15: - In sja1105_best_effort_vlan_filtering_set, get the vlan_filtering value of each port instead of just one time for port 0. Normally this shouldn't matter, but it avoids issues when port 0 is disabled in device tree. Patch 14/14: - Only do anything in sja1105_build_subvlans and in sja1105_build_crosschip_subvlans when operating in SJA1105_VLAN_BEST_EFFORT state. This avoids installing VLAN retagging rules in unaware mode, which would cost us a penalty in terms of usable frame memory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-24 02:22:17 +0000