| Age | Commit message (Collapse) | Author |
|---|
|
With generic data structure, it is possible to generalize vddio
operators and DT parsing code of cv18xx pinctrl driver. Introduce
sophgo_cfg_ops callback to allow the driver to adjust the soc
logic and share common code.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/20250211051801.470800-4-inochiama@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
To share DT parsing and vddio code, it is necessary to introduce
some generic data structure to abstract the different cv18xx series
and the incoming sg2042 series.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/20250211051801.470800-3-inochiama@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When setting pinconf configuration for cv1800 SoC, the driver just writes
the value. It may zero some bits of the pinconf register and cause some
unexpected error. Add a mask to avoid this.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/20250211051801.470800-2-inochiama@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It looks like both 8917 and 8937 are the same except for one pin
"wsa_reset".
Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/20250211-msm8937-v1-4-7d27ed67f708@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There are a few Intel pin control drivers that are affected
by the devm_kmemdup_array() conversion, merge the ib-devres-iio-input-pinctrl
for making development going smoothly.
* Split devres APIs to a separate header (linux/device/devres.h)
* Move IOMEM_ERR_PTR() to err.h to avoid unneeded loops
* Introduce devm_kmemdup_array()
* Use devm_kmemdup_array() in input, IIO, and pinctrl subsystems
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
devm_kmemdup_array()"
Raag Jadav <raag.jadav@intel.com> says:
This series
1. Splits device/devres.h for the users that are only interested in devres APIs.
Original work by Andy Shevchenko:
https://lore.kernel.org/r/20241203195340.855879-1-andriy.shevchenko@linux.intel.com
2. Introduces a more robust and cleaner devm_kmemdup_array() helper and uses it
across drivers.
The idea behind embedding both work into a single series is to make the review
process easier and reduce conflicts while merging.
Link: https://lore.kernel.org/r/20250212062513.2254767-1-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Copy communities using devm_kmemdup_array() instead of doing it manually.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Copy communities using devm_kmemdup_array() instead of doing it manually.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Introduce '_array' variant of devm_kmemdup() which is more robust and
consistent with alloc family of helpers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of including a huge device.h with tons of dependencies
include only what driver actually uses.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
device.h is a huge header which is hard to follow and easy to miss
something. Improve that by splitting devres APIs to device/devres.h.
In particular this helps to speedup the build of the code that includes
device.h solely for a devres APIs.
While at it, cast the error pointers to __iomem using IOMEM_ERR_PTR()
and fix sparse warnings.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Since IOMEM_ERR_PTR() macro deals with an error pointer, a better place
for it is err.h. This helps avoid dependency on io.h for the users that
don't need it.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Suppress binding attributes for the rzg2l pinctrl driver, as it is an
essential block for Renesas SoCs. Unbinding the driver leads to
warnings from __device_links_no_driver() and can eventually render the
system inaccessible.
Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250215131235.228274-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
One comment style is not aligned with the rest. Fix that.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Currently it's not easy to see at a glance the group of the registers
that are per port. Add a blank line and a comment to make it better.
Also add a missing definition for one of the EEPROM related registers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The 'arg' variable in cy8c95x0_gpio_get_pincfg() is already type of u16.
No need to cast it, so drop unneeded casting.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The function is used before being defined. Just move it up enough to
get rid of forward declaration.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The 'ret' variable in cy8c95x0_irq_handler() is defined as bool,
but is intialised with integers. Avoid implicit castings and
initialise boolean variable with boolean values.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When it's known that the returned value can't be non-zero,
use 'return 0' explicitly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The function is never called with the PORTSEL register in the argument.
Drop unneeded check, but rescue a comment. While at it, drop inline
and allow any compiler to choose better stragy (note, that inline in
C code is only a recomendation to most of the modern compilers anyway).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The returned value of cy8c95x0_regmap_read() is used always with
a bitmask being applied. Move that bitmasking code into the function.
At the same time transform it to cy8c95x0_regmap_read_bits() which
will be in align with the write and update counterparts.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
for_each_set_clump8() has embedded check for unset clump to skip.
Switch driver to use for_each_set_clump8().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There are bitmap_gather() and bitmap_scatter() that are factually
reimplemented in the driver. Use better bitmap APIs where appropriate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
irq_mask()/irq_unmask() are not called for nested interrupts. So level
interrupts are never masked, chip's interrupt output is not cleared on
INTCAP or GPIO read, the irq handler is uselessly called again. Nested
irq handler is not called again, because interrupt reason is cleared by
its first call.
/proc/interrupts shows that number of chip's irqs is greater than
number of nested irqs.
This patch adds masking and unmasking level interrupts inside irq handler.
Signed-off-by: Dmitry Mastykin <mastichi@gmail.com>
Link: https://lore.kernel.org/20250122120504.1279790-1-mastichi@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
fwnode_irq_get() was changed to not return 0, fix this by checking
for negative error, also update the error log.
Fixes: acf4884a5717 ("pinctrl: nuvoton: add NPCM8XX pinctrl and GPIO driver")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/20250118031334.243324-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
fwnode_irq_get() was changed to not return 0, so this check is dead code now.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20250118031145.243104-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Cross case in pinctrl framework make impossible to an hogged pin and
another, not hogged, used within the same device-tree node. For example
with this simplified device-tree :
&pinctrl {
pinctrl_pin_1: pinctrl-pin-1 {
pins = "dummy-pinctrl-pin";
};
};
&rtc {
pinctrl-names = "default"
pinctrl-0 = <&pinctrl_pin_1 &rtc_pin_1>
rtc_pin_1: rtc-pin-1 {
pins = "dummy-rtc-pin";
};
};
"pinctrl_pin_1" configuration is never set. This produces this path in
the code:
really_probe()
pinctrl_bind_pins()
| devm_pinctrl_get()
| pinctrl_get()
| create_pinctrl()
| pinctrl_dt_to_map()
| // Hog pin create an abort for all pins of the node
| ret = dt_to_map_one_config()
| | /* Do not defer probing of hogs (circular loop) */
| | if (np_pctldev == p->dev->of_node)
| | return -ENODEV;
| if (ret)
| goto err
|
call_driver_probe()
stm32_rtc_probe()
pinctrl_enable()
pinctrl_claim_hogs()
create_pinctrl()
for_each_maps(maps_node, i, map)
// Not hog pin is skipped
if (pctldev && strcmp(dev_name(pctldev->dev),
map->ctrl_dev_name))
continue;
At the first call of create_pinctrl() the hogged pin produces an abort to
avoid a defer of hogged pins. All other pin configurations are trashed.
At the second call, create_pinctrl is now called with pctldev parameter to
get hogs, but in this context only hogs are set. And other pins are
skipped.
To handle this, do not produce an abort in the first call of
create_pinctrl(). Classic pin configuration will be set in
pinctrl_bind_pins() context. And the hogged pin configuration will be set
in pinctrl_claim_hogs() context.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/20250116170009.2075544-1-valentin.caron@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix annoying logs when building tools in parallel
- Fix the Debian linux-headers package build again
- Fix the target triple detection for userspace programs on Clang
* tag 'kbuild-fixes-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix a few typos in a comment
kbuild: userprogs: fix bitsize and target detection on clang
kbuild: fix linux-headers package build when $(CC) cannot link userspace
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported problems.
Nothing major, just:
- sc16is7xx irq check fix
- 8250 fifo underflow fix
- serial_port and 8250 iotype fixes
Most of these have been in linux-next already, and all have passed
0-day testing"
* tag 'tty-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix fifo underflow on flush
serial: 8250_pnp: Remove unneeded ->iotype assignment
serial: 8250_platform: Remove unneeded ->iotype assignment
serial: 8250_of: Remove unneeded ->iotype assignment
serial: port: Make ->iotype validation global in __uart_read_properties()
serial: port: Always update ->iotype in __uart_read_properties()
serial: port: Assign ->iotype correctly when ->iobase is set
serial: sc16is7xx: Fix IRQ number check behavior
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes, and new device ids, for
6.14-rc3. Lots of tiny stuff for reported problems, including:
- new device ids and quirks
- usb hub crash fix found by syzbot
- dwc2 driver fix
- dwc3 driver fixes
- uvc gadget driver fix
- cdc-acm driver fixes for a variety of different issues
- other tiny bugfixes
Almost all of these have been in linux-next this week, and all have
passed 0-day testing"
* tag 'usb-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY
usb: roles: set switch registered flag early on
usb: gadget: uvc: Fix unstarted kthread worker
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
usb: gadget: core: flush gadget workqueue after device removal
USB: gadget: f_midi: f_midi_complete to call queue_work
usb: core: fix pipe creation for get_bMaxPacketSize0
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
usb: cdc-acm: Fix handling of oversized fragments
usb: cdc-acm: Check control transfer buffer size before access
usb: xhci: Restore xhci_pci support for Renesas HCs
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
usb: dwc2: gadget: remove of_node reference upon udc_stop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq Kconfig cleanup from Borislav Petkov:
- Remove an unused config item GENERIC_PENDING_IRQ_CHIPFLAGS
* tag 'irq_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove unused CONFIG_GENERIC_PENDING_IRQ_CHIPFLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Borislav Petkov:
- Explicitly clear DEBUGCTL.LBR to prevent LBRs continuing being
enabled after handoff to the OS
- Check CPUID(0x23) leaf and subleafs presence properly
- Remove the PEBS-via-PT feature from being supported on hybrid systems
- Fix perf record/top default commands on systems without a raw PMU
registered
* tag 'perf_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
perf/x86/intel: Clean up PEBS-via-PT on hybrid
perf/x86/rapl: Fix the error checking order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Clarify what happens when a task is woken up from the wake queue and
make clear its removal from that queue is atomic
* tag 'sched_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Clarify wake_up_q()'s write to task->wake_q.next
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Move a warning about a lld.ld breakage into the verbose setting as
said breakage has been fixed in the meantime
- Teach objtool to ignore dangling jump table entries added by Clang
* tag 'objtool_urgent_for_v6.14_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Move dodgy linker warn to verbose
objtool: Ignore dangling jump table entries
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fix for o32 ptrace/get_syscall_info"
* tag 'mips-fixes_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix mips_get_syscall_arg() for o32
MIPS: Export syscall stack arguments properly for remote use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add bindings for QCom QCS8300 clocks, QCom SAR2130P qfprom, and
powertip,{st7272|hx8238a} displays
- Fix compatible for TI am62a7 dss
- Add a kunit test for __of_address_resource_bounds()
* tag 'devicetree-fixes-for-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: Add powertip,{st7272|hx8238a} as DT Schema description
dt-bindings: nvmem: qcom,qfprom: Add SAR2130P compatible
dt-bindings: display: ti: Fix compatible for am62a7 dss
of: address: Add kunit test for __of_address_resource_bounds()
dt-bindings: clock: qcom: Add QCS8300 video clock controller
dt-bindings: clock: qcom: Add CAMCC clocks for QCS8300
dt-bindings: clock: qcom: Add GPU clocks for QCS8300
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML fixes from Richard Weinberger:
- Align signal stack correctly
- Convert to raw spinlocks where needed (irq and virtio)
- FPU related fixes
* tag 'uml-for-linus-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: convert irq_lock to raw spinlock
um: virtio_uml: use raw spinlock
um: virt-pci: don't use kmalloc()
um: fix execve stub execution on old host OSs
um: properly align signal stack on x86_64
um: avoid copying FP state from init_task
um: add back support for FXSAVE registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace ring buffer fixes from Steven Rostedt:
- Enable resize on mmap() error
When a process mmaps a ring buffer, its size is locked and resizing
is disabled. But if the user passes in a wrong parameter, the mmap()
can fail after the resize was disabled and the mmap() exits with
error without reenabling the ring buffer resize. This prevents the
ring buffer from ever being resized after that. Reenable resizing of
the ring buffer on mmap() error.
- Have resizing return proper error and not always -ENOMEM
If the ring buffer is mmapped by one task and another task tries to
resize the buffer it will error with -ENOMEM. This is confusing to
the user as there may be plenty of memory available. Have it return
the error that actually happens (in this case -EBUSY) where the user
can understand why the resize failed.
- Test the sub-buffer array to validate persistent memory buffer
On boot up, the initialization of the persistent memory buffer will
do a validation check to see if the content of the data is valid, and
if so, it will use the memory as is, otherwise it re-initializes it.
There's meta data in this persistent memory that keeps track of which
sub-buffer is the reader page and an array that states the order of
the sub-buffers. The values in this array are indexes into the
sub-buffers. The validator checks to make sure that all the entries
in the array are within the sub-buffer list index, but it does not
check for duplications.
While working on this code, the array got corrupted and had
duplicates, where not all the sub-buffers were accounted for. This
passed the validator as all entries were valid, but the link list was
incorrect and could have caused a crash. The corruption only produced
incorrect data, but it could have been more severe. To fix this,
create a bitmask that covers all the sub-buffer indexes and set it to
all zeros. While iterating the array checking the values of the array
content, have it set a bit corresponding to the index in the array.
If the bit was already set, then it is a duplicate and mark the
buffer as invalid and reset it.
- Prevent mmap()ing persistent ring buffer
The persistent ring buffer uses vmap() to map the persistent memory.
Currently, the mmap() logic only uses virt_to_page() to get the page
from the ring buffer memory and use that to map to user space. This
works because a normal ring buffer uses alloc_page() to allocate its
memory. But because the persistent ring buffer use vmap() it causes a
kernel crash.
Fixing this to work with vmap() is not hard, but since mmap() on
persistent memory buffers never worked, just have the mmap() return
-ENODEV (what was returned before mmap() for persistent memory ring
buffers, as they never supported mmap. Normal buffers will still
allow mmap(). Implementing mmap() for persistent memory ring buffers
can wait till the next merge window.
- Fix polling on persistent ring buffers
There's a "buffer_percent" option (default set to 50), that is used
to have reads of the ring buffer binary data block until the buffer
fills to that percentage. The field "pages_touched" is incremented
every time a new sub-buffer has content added to it. This field is
used in the calculations to determine the amount of content is in the
buffer and if it exceeds the "buffer_percent" then it will wake the
task polling on the buffer.
As persistent ring buffers can be created by the content from a
previous boot, the "pages_touched" field was not updated. This means
that if a task were to poll on the persistent buffer, it would block
even if the buffer was completely full. It would block even if the
"buffer_percent" was zero, because with "pages_touched" as zero, it
would be calculated as the buffer having no content. Update
pages_touched when initializing the persistent ring buffer from a
previous boot.
* tag 'trace-ring-buffer-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Update pages_touched to reflect persistent buffer content
tracing: Do not allow mmap() of persistent ring buffer
ring-buffer: Validate the persistent meta data subbuf array
tracing: Have the error of __tracing_resize_ring_buffer() passed to user
ring-buffer: Unlock resize on mmap error
|
|
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home
Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When trying to mmap a trace instance buffer that is attached to
reserve_mem, it would crash:
BUG: unable to handle page fault for address: ffffe97bd00025c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 2862f3067 P4D 2862f3067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI
CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:validate_page_before_insert+0x5/0xb0
Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89
RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246
RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29
RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08
RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000
R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000
FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x1f
? __die+0x2e/0x40
? page_fault_oops+0x157/0x2b0
? search_module_extables+0x53/0x80
? validate_page_before_insert+0x5/0xb0
? kernelmode_fixup_or_oops.isra.0+0x5f/0x70
? __bad_area_nosemaphore+0x16e/0x1b0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x77/0x90
? exc_page_fault+0x22b/0x230
? asm_exc_page_fault+0x2b/0x30
? validate_page_before_insert+0x5/0xb0
? vm_insert_pages+0x151/0x400
__rb_map_vma+0x21f/0x3f0
ring_buffer_map+0x21b/0x2f0
tracing_buffers_mmap+0x70/0xd0
__mmap_region+0x6f0/0xbd0
mmap_region+0x7f/0x130
do_mmap+0x475/0x610
vm_mmap_pgoff+0xf2/0x1d0
ksys_mmap_pgoff+0x166/0x200
__x64_sys_mmap+0x37/0x50
x64_sys_call+0x1670/0x1d70
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reason was that the code that maps the ring buffer pages to user space
has:
page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]);
And uses that in:
vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home
Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"MAINTAINERS maintenance.
Changed email, added entry, deleted entry falling back to a generic
one"
* tag 'i2c-for-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add maintainer for Qualcomm's I2C GENI driver
MAINTAINERS: delete entry for AXXIA I2C
MAINTAINERS: Use my kernel.org address for I2C ACPI work
|
