summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-18qede: Fix Tx timeout due to xmit_moreYuval Mintz
Driver uses netif_tx_queue_stopped() to make sure the xmit_more indication will be honored, but that only checks for DRV_XOFF. At the same time, it's possible that during transmission the DQL will close the transmission queue with STACK_XOFF indication. In re-configuration flows, when the threshold is relatively low, it's possible that the device has no pending tranmissions, and during tranmission the driver would miss doorbelling the HW. Since there are no pending transmission, there will never be a Tx completion [and thus the DQL would not remove the STACK_XOFF indication], eventually causing the Tx queue to timeout. While we're at it - also doorbell in case driver has to close the transmission queue on its own [although this one is less important - if the ring is full, we're bound to receive completion eventually, which means the doorbell would only be postponed and not indefinetly blocked]. Fixes: 312e06761c99 ("qede: Utilize xmit_more") Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18Merge branch 'qed-next'David S. Miller
Sudarsana Reddy Kalluru says: ==================== qed*: Add support for additional statistics. The patch series adds qed/qede support for new statistics. Patch (1) adds couple of statistcs for "ethtool -S" display. Patch (2) adds support for per-queue statistics to ethtool display. Patch (3) adds qed support for NCSI statistics. Please consider applying this to 'net-next' branch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qed: Add support for NCSI statistics.Sudarsana Reddy Kalluru
The patch adds driver support for sending the NCSI statistics to the MFW. This is an asynchronous request from MFW. Upon receiving this, driver populates the required data and send it to MFW. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qede: Add support for per-queue stats.Sudarsana Reddy Kalluru
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qede: Add support for capturing additional stats in ethtool-stats display.Sudarsana Reddy Kalluru
The patch adds driver support for capturing stats ttl0_discard and packet_too_big_discard in "ethtool -S" display. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18net: atm: remove redundant null pointer check on dev->nameColin Ian King
dev->name is a char array of IFNAMSIZ elements, hence can never be null, so the null pointer check is redundant. Remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18net: phy: Update copyright infoAppana Durga Kedareswara Rao
For implementing this driver most of the inputs is provided by Andrew Lunn. Updating the driver with Andrew Copy right. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18net: ethernet: macb: Add support for rx_clkshubhrajyoti.datta@xilinx.com
Some of the platforms like zynqmp ultrascale+ has a separate clock gate for the rx clock. Add an optional rx_clk so that the clock can be enabled. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-08-18 This series contains updates to i40e and i40evf only. Wei Yongjun updates i40e to use list_move() instead of list_del() & list_add() operations. Anjali fixes an issue where the client->open call was not protected with the client instance mutex, which allowed client->close to be called before the open all completed. Catherine makes sure that the VLAN count (and stats) gets reset to 0 after reset. Jake provides two patches, first adds the needed rtnl lock around i40evf_set_interrupt_capability() since i40evf_init_task() does not hold the rtnl_lock. Second fixes an issue where users could reduce the number of channels (queues) below the current flow director filter rules targets. Dave fixes a problem where a static analysis tool generates a warning so eliminating the irrelevant check and redundant assignment for the value of enabled_tc. Avinash fixes an sync issue where the iWARP device open is called before the PCI register writes are completed, so ensure the register writes complete before exiting the setup function. Alan fixes a bug which causes RSS to continue to work after being disabled. Carolyn implements a feature change which allows using ethtool to set RDD hash options using less than four parameters if desired. Dan Carpenter cleans up a stray unlock. Sridhar exposes the "trust" flag to userspace via ndo_get_vf_config(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18bcache: pr_err: more meaningful error message when nr_stripes is invalidEric Wheeler
The original error was thought to be corruption, but was actually caused by: make-bcache --data-offset N where N was in bytes and should have been in sectors. While userspace tools should be updated to check --data-offset beyond end of volume, hopefully this will help others that might not have noticed the units. Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kent.overstreet@gmail.com>
2016-08-18bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.Kent Overstreet
This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950 [ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20 [ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50 [ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180 [ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110 [ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110 [ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0 [ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0 [ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0 [ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80 [ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: stable@vger.kernel.org
2016-08-18bcache: register_bcache(): call blkdev_put() when cache_alloc() failsEric Wheeler
register_cache() is supposed to return an error string on error so that register_bcache() will will blkdev_put and cleanup other user counters, but it does not set 'char *err' when cache_alloc() fails (eg, due to memory pressure) and thus register_bcache() performs no cleanup. register_bcache() <----------\ <- no jump to err_close, no blkdev_put() | | +->register_cache() | <- fails to set char *err | | +->cache_alloc() ---/ <- returns error This patch sets `char *err` for this failure case so that register_cache() will cause register_bcache() to correctly jump to err_close and do cleanup. This was tested under OOM conditions that triggered the bug. Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: stable@vger.kernel.org
2016-08-18Merge tag 'drm-fixes-for-4.8-rc3-2' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull more drm fixes from Dave Airlie: "Daniel pointed out I'd missed some i915 fixes, and I also found a single etnaviv fix I missed. So here they are" * tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux: drm/etnaviv: take GPU lock later in the submit process drm/i915: Fix modeset handling during gpu reset, v5. drm/i915: fix aliasing_ppgtt leak drm/i915: fix WaInsertDummyPushConstPs drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 drm/i915/gen9: Give one extra block per line for SKL plane WM calculations drm/i915: Acquire audio powerwell for HD-Audio registers drm/i915: Add missing rpm wakelock to GGTT pread drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 drm/i915: Program iboost settings for HDMI/DVI on SKL drm/i915: Fix iboost setting for DDI with 4 lanes on SKL drm/i915: Handle ENOSPC after failing to insert a mappable node drm/i915: Flush GT idle status upon reset
2016-08-18Merge tag 'devicetree-fixes-for-4.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - a couple of DT node ref counting fixes - fix __unflatten_device_tree for PPC PCI hotplug case - rework marking irq controllers as OF_POPULATED in cases where real driver is used. - disable of_platform_default_populate_init on PPC. The change in initcall order causes problems which need to be sorted out later. * tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fix reference counting in of_graph_get_endpoint_by_regs of/platform: disable the of_platform_default_populate_init() for all the ppc boards ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver of/irq: Mark interrupt controllers as populated before initialisation drivers/of: Validate device node in __unflatten_device_tree() of: Delete an unnecessary check before the function call "of_node_put"
2016-08-18scsi: sas: remove is_sas_attached()Johannes Thumshirn
As there are no more users of is_sas_attached() left, remove it. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-18scsi: ses: use scsi_is_sas_rphy instead of is_sas_attachedJohannes Thumshirn
Use scsi_is_sas_rphy() instead of is_sas_attached() to decide whether we should obtain the SAS address from a scsi device or not. This will prevent us from tripping on the BUG_ON() in sas_sdev_to_rdev() if the rphy isn't attached to the SAS transport class, like it is with hpsa's logical devices. Fixes: 3f8d6f2a0 ('ses: fix discovery of SATA devices in SAS enclosures') Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-18scsi: sas: provide stub implementation for scsi_is_sas_rphyJohannes Thumshirn
Provide a stub implementation for scsi_is_sas_rphy for kernel configurations which do not have CONFIG_SCSI_SAS_ATTRS defined. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com> Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-19f2fs: avoid potential deadlock in f2fs_move_file_rangeChao Yu
Thread A Thread B - inode_lock fileA - inode_lock fileB - inode_lock fileA - inode_lock fileB We may encounter above potential deadlock during moving file range in concurrent scenario. This patch fixes the issue by using inode_trylock instead. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-19f2fs: allow copying file range only in between regular filesChao Yu
Only if two input files are regular files, we allow copying data in range of them, otherwise, deny it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-19Revert "f2fs: move i_size_write in f2fs_write_end"Chao Yu
This reverts commit a2ee0a300344a6da76186129b078113354fe13d2. When testing with generic/032 of xfstest suit, failure message will be reported as below: generic/032 8s ... [failed, exit status 1] - output mismatch (see results/generic/032.out.bad) --- tests/generic/032.out 2015-01-11 16:52:27.643681072 +0800 +++ results/generic/032.out.bad 2016-08-06 13:44:43.861330500 +0800 @@ -1,5 +1,5 @@ QA output created by 032 -100 iterations -0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd -* -0100000 +1: [768..775]: unwritten +Unwritten extents found! ... (Run 'diff -u tests/generic/032.out results/generic/032.out.bad' to see the entire diff) Ran: generic/032 Failures: generic/032 Failed 1 of 1 tests In write_end(), we should update i_size of inode before unlock page, otherwise, we will lose newly updated data in following race condition. Thread A Thread B - write_end - unlock page - writepages - lock_page - writepage if page is out-of-range of file size, we will skip writting the page. - update i_size Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-08-19Revert "f2fs: use percpu_rw_semaphore"Jaegeuk Kim
LKP reported -36.3% regression of fsmark.files_per_sec due to this patch. I've confirmed that fxmark [1] has also slight regression for DWAL. [1] https://github.com/sslab-gatech/fxmark This reverts commit ec795418c41850056feb956534edf059dc1155d4.
2016-08-18Merge tag '4.8-doc-fixes' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fixes from Jonathan Corbet: "Three small fixes for Sphinx-formatted documentation generation" * tag '4.8-doc-fixes' of git://git.lwn.net/linux: doc-rst: customize RTD theme, drop padding of inline literal docs: kernel-documentation: remove some highlight directives docs: Set the Sphinx default highlight language to "guess"
2016-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter updates for your net tree, they are: 1) Dump only conntrack that belong to this namespace via /proc file. This is some fallout from the conversion to single conntrack table for all netns, patch from Liping Zhang. 2) Missing MODULE_ALIAS_NF_LOGGER() for the ARP family that prevents module autoloading, also from Liping Zhang. 3) Report overquota event to the right netnamespace, again from Liping. 4) Fix tproxy listener sk refcount that leads to crash, from Eric Dumazet. 5) Fix racy refcounting on object deletion from nfnetlink and rule removal both for nfacct and cttimeout, from Liping Zhang. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19usb: chipidea: udc: don't touch DP when controller is in host modeLi Jun
When the controller is configured to be dual role and it's in host mode, if bind udc and gadgt driver, those gadget operations will do gadget disconnect and finally pull down DP line, which will break host function. Cc: <stable@vger.kernel.org> # 4.1+ Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-08-19Merge tag 'drm-intel-fixes-2016-08-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Collection of i915 fixes. * tag 'drm-intel-fixes-2016-08-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix modeset handling during gpu reset, v5. drm/i915: fix aliasing_ppgtt leak drm/i915: fix WaInsertDummyPushConstPs drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 drm/i915/gen9: Give one extra block per line for SKL plane WM calculations drm/i915: Acquire audio powerwell for HD-Audio registers drm/i915: Add missing rpm wakelock to GGTT pread drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 drm/i915: Program iboost settings for HDMI/DVI on SKL drm/i915: Fix iboost setting for DDI with 4 lanes on SKL drm/i915: Handle ENOSPC after failing to insert a mappable node drm/i915: Flush GT idle status upon reset
2016-08-19Merge branch 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux ↵Dave Airlie
into drm-fixes Single GPU recovery fix * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: take GPU lock later in the submit process
2016-08-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "An initrd microcode loading fix, and an SMP bootup topology setup fix to resolve crashes on SGI/UV systems if the BIOS is configured in a certain way" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Fix __max_logical_packages value setup x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
2016-08-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/mips-gic-timer: Make gic_clocksource_of_init() return int clocksource/drivers/kona: Fix get_counter() error handling clocksource/drivers/time-armada-370-xp: Fix the clock reference
2016-08-18Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two cputime fixes - hopefully the last ones" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Resync steal time when guest & host lose sync sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
2016-08-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also start/stop filter related fixes, a perf event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Check return value of the perf_event_read() IPI perf/core: Enable mapping of the stop filters perf/core: Update filters only on executable mmap perf/core: Fix file name handling for start/stop filters perf/core: Fix event_function_local() uprobes: Fix the memcg accounting perf intel-pt: Fix occasional decoding errors when tracing system-wide tools: Sync kvm related header files for arm64 and s390 perf probe: Release resources on error when handling exit paths perf probe: Check for dup and fdopen failures perf symbols: Fix annotation of objects with debuginfo files perf script: Don't disable use_callchain if input is pipe perf script: Show proper message when failed list scripts perf jitdump: Add the right header to get the major()/minor() definitions perf ppc64le: Fix build failure when libelf is not present perf tools mem: Fix -t store option for record command perf intel-pt: Fix ip compression
2016-08-18Merge tag 'perf-urgent-for-mingo-20160818' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Do not access outside hw cache name arrays (Arnaldo Carvalho de Melo) - Use addr_location::addr instead of ip for entries when unwinding using DWARF CFI, fixing the "srcline" information for userspace application callchains (Milian Wolff) - Reinstate strlcpy() header guard with __UCLIBC__, fixing the build with uclibc, detected when building for the ARC architecture (Vineet Gupta) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two lockless_dereference() related fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/barriers: Suppress sparse warnings in lockless_dereference() Revert "drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference"
2016-08-18perf evsel: Do not access outside hw cache name arraysArnaldo Carvalho de Melo
We have to check if the values are >= *_MAX, not just >, fix it. From the bugzilla report: ''In file /tools/perf/util/evsel.c function __perf_evsel__hw_cache_name it appears that there is a bug that reads beyond the end of the buffer. The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be equal to the maximum value. Later, when statement "if (!perf_evsel__is_cache_op_valid(type, op))" is executed, the function can access array perf_evsel__hw_cache_stat[type] beyond the end of the buffer. It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)" should be "if (type >= PERF_COUNT_HW_CACHE_MAX)" Bug found with Coverity and manual code review. No attempts were made to execute the code with a maximum type value.'' Committer note: Testing it: $ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1 [ perf record: Woken up 16 times to write data ] [ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ] $ perf evlist L1-dcache-load-misses L1-dcache-loads L1-dcache-stores L1-icache-load-misses LLC-load-misses LLC-loads LLC-store-misses LLC-stores branch-load-misses branch-loads dTLB-load-misses dTLB-loads dTLB-store-misses dTLB-stores iTLB-load-misses iTLB-loads node-load-misses node-loads node-store-misses node-stores $ perf list cache List of pre-defined events (to be used in -e): L1-dcache-load-misses [Hardware cache event] L1-dcache-loads [Hardware cache event] L1-dcache-stores [Hardware cache event] L1-icache-load-misses [Hardware cache event] LLC-load-misses [Hardware cache event] LLC-loads [Hardware cache event] LLC-store-misses [Hardware cache event] LLC-stores [Hardware cache event] branch-load-misses [Hardware cache event] branch-loads [Hardware cache event] dTLB-load-misses [Hardware cache event] dTLB-loads [Hardware cache event] dTLB-store-misses [Hardware cache event] dTLB-stores [Hardware cache event] iTLB-load-misses [Hardware cache event] iTLB-loads [Hardware cache event] node-load-misses [Hardware cache event] node-loads [Hardware cache event] node-store-misses [Hardware cache event] node-stores [Hardware cache event] $ Reported-by: Brian Sweeney <bsweeney@lgsinnovations.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-18tools lib: Reinstate strlcpy() header guard with __UCLIBC__Vineet Gupta
perf tools build in recent kernels spews splat when cross compiling with uClibc: | CC util/alias.o | In file included from tools/perf/util/../ui/../util/cache.h:8:0, | from tools/perf/util/../ui/helpline.h:7, | from tools/perf/util/debug.h:8, | from arch/../util/cpumap.h:9, | from arch/../util/env.h:5, | from arch/common.h:4, | from arch/common.c:3: | tools/include/linux/string.h:12:15: warning: redundant redeclaration of ‘strlcpy’ [-Wredundant-decls] | extern size_t strlcpy(char *dest, const char *src, size_t size); ^ This is after commit 61a6445e463a31 ("tools lib: Guard the strlcpy() header with __GLIBC__"). The problem is uClibc also defines __GLIBC__ for exported headers for applications. So add that specific check to not trip for uClibc. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petri Gynther <pgynther@google.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: linux-snps-arc@lists.infradead.org Link: http://lkml.kernel.org/r/1471537703-16439-1-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-18i40e: Expose 'trust' flag to userspace via ndo_get_vf_config.Sridhar Samudrala
This enables ip -d l to indicate if trust is on or off for VFs. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: remove a stray unlockDan Carpenter
We shifted the locking around a bit but forgot to delete this unlock so now it can unlock twice. Fixes: cd3be169a5ff ('i40e: Move the mutex lock in i40e_client_unregister') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e/i40evf-Bump version from 1.6.11 to 1.6.12Bimmy Pujari
Signed-off-by: Bimmy Pujari <Bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Allow RSS Hash set with less than four parametersCarolyn Wyborny
This patch implements a feature change which allows using ethtool to set RSS hash opts using less than four parameters if desired. Change-ID: I0fbb91255d81e997c456697c21ac39cc9754821b Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: fix memory leakMitch Williams
When we allocate memory, we must free it. It's simple courtesy. Change-ID: Id007294096fb53344f1a8b9a0f78eddf9853c5d6 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: fix lookup table when RSS disabled/enabledAlan Brady
This patch fixes the bug which causes RSS to continue to work after being disabled. After disabling RSS, traffic would continue to be assigned to different queues instead of falling back to a single queue. Without this patch, attempting to disable RSS would not work as expected. This patch fixes the bug by clearing the lookup table used by RSS such that all traffic is assigned to a single queue. This patch also addresses the issue of reinstating the lookup table should RSS then be re-enabled. Change-ID: Ib20c7c6a7e9f1f772bb787370f8a8c664796b141 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Don't notify client of VF reset during VF creationAvinash Dayanand
VF goes through reset path during VF creation which happens to also have notification of VF reset to client. Adding conditional check to avoid wrongly notifying VF reset during VF creation. Also changing the call order of VF enable, calling it after VF creation rather than before. Change-ID: I96eabd99deae746a2f0fc465194c886f196178ce Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Force register writes to mitigate sync issues with iwarp VF driverAvinash Dayanand
This patch is a fix for the bug i.e. unable to create iwarp device in VF. This is a sync issue and the iwarp device open is called even before the PCI register writes are done. Forcing the PCI register writes to happen just before it exits the function. Change-ID: I60c6a2c709da89e845f2764cc50ce8b7373c8c44 Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: don't allow reduction of channels below active FD rulesJacob Keller
If a driver is unable to maintain all current user supplied settings from ethtool (or other sources), it is not ok for a user request to succeed and silently trample over previous configuration. To that end, if you change the number of channels, it must not be allowed to reduce the number of channels (queues) below the current flow director filter rules targets. In this case, return -EINVAL when a request to reduce the number of channels would do so. In addition log a warning to the kernel buffer explaining why we failed, and report the rules which prevent us from lowering the number of channels. Change-ID: If41464d63d7aab11cedf09e4f3aa1a69e21ffd88 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Fix static analysis tool warningDave Ertman
This patch fixes a problem where a static analysis tool generates a warning for "INVARIANT_CONDITION: Expression 'enabled_tc' used in the condition always yields the same result." Without this patch, the driver will not pass the static analysis tool checks without generating warnings. This patch fixes the problem by eliminating the irrelevant check and redundant assignment for the value of enabled_tc. Change-ID: Ia7d44cb050f507df7de333e96369d322e08bf408 Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capabilityJacob Keller
The function calls netif_set_real_num_(tx|rx)_queues, both of which should be done only under rntl lock. Unfortunately the i40evf_init_task did not hold the rtnl_lock as necessary. This patch adds the locking needed. Change-ID: Ib72a21c3ce22b71a226b16f9bbe0f5f8cc3e849b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: reset RX csum error stat with other pf statsCatherine Sullivan
When we are resetting the pf stats we should also reset the RX csum error stat. Change-ID: I7af5ee0ec81a10f6deee1a7b8c2082ea068ef620 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e/i40evf: Reset VLAN filter count when resettingCatherine Sullivan
When we do a reset, all the VLAN filters get added again. Therefore we also want to reset the VLAN count to 0 or we quickly run out of filters. Change-ID: I459f26851e22204dc8b8999928ad87cde8170119 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Fix a bug where a client close can be called before an open is completeAnjali Singhai Jain
The client->open call in this path was not protected with the client instance mutex, and hence the client->close can get initiated before the open completes. Change-Id: I0ed60c38868dd3f44966b6ed49a063d0e5b7edf5 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Use list_move instead of list_del/list_addWei Yongjun
Using list_move() instead of list_del() + list_add(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Avoid a literal load with the MMU off on the CPU resume path (potential inconsistency between cache and RAM) - Build error with CONFIG_ACPI=n fixed - Compiler warning in the arch/arm64/mm/dump.c code fixed * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix shift warning in arch/arm64/mm/dump.c arm64: kernel: avoid literal load of virtual address with MMU off arm64: Fix NUMA build error when !CONFIG_ACPI
generated by cgit (git 2.34.1) at 2025-09-28 05:53:34 +0000