| Age | Commit message (Collapse) | Author |
|---|
|
Currently the back pointer from a queue to the vhost adapter isn't set
until after subcrq interrupt registration. The value is available when a
queue is first allocated and can/should be also set for primary and async
queues as well as subcrqs.
This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS
interrupt controller where a pending subcrq interrupt from the previous
kernel can be replayed immediately upon IRQ registration resulting in
dereference of a garbage backpointer in ibmvfc_interrupt_scsi().
Kernel attempted to read user page (58) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000058
Faulting instruction address: 0xc008000003216a08
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc]
LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
Call Trace:
[c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable)
[c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270
[c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188
[c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310
[c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80
[c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0
[c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130
[c000000014622f60] [0000000020000000] 0x20000000
[c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0
[c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0
[c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170
[c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0
[c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0
[c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230
[c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc]
[c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc]
[c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc]
[c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc]
[c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]
Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the sub-queues and event pool resources are allocated/freed for
every CRQ connection event such as reset and LPM. This exposes the driver
to a couple issues. First the inefficiency of freeing and reallocating
memory that can simply be resued after being sanitized. Further, a system
under memory pressue runs the risk of allocation failures that could result
in a crippled driver. Finally, there is a race window where command
submission/compeletion can try to pull/return elements from/to an event
pool that is being deleted or already has been deleted due to the lack of
host state around freeing/allocating resources. The following is an example
of list corruption following a live partition migration (LPM):
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1
NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10
REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le)
MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f
CFAR: c0000000001f55bc IRQMASK: 0
GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e
GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027
GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000
GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300
GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000
GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300
NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100
LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100
Call Trace:
[c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable)
[c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc]
[c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc]
[c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc]
[c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc]
[c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc]
[c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0
[c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64
Instruction dump:
40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78
3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640
---[ end trace 11a2b65a92f8b66c ]---
ibmvfc 30000003: Send warning. Receive queue closed, will retry.
Add registration/deregistration helpers that are called instead during
connection resets to sanitize and reconfigure the queues.
Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com
Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code is based on the idea that the max number of SGL entries
also determines the max size of an I/O request. While this idea was
true in older versions of the storvsc driver when SGL entry length
was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable
scatterlist entry lengths > 4Kbytes") removed that limitation. It's
now theoretically possible for the block layer to send requests that
exceed the maximum size supported by Hyper-V. This problem doesn't
currently happen in practice because the block layer defaults to a
512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes.
But some future configuration of Hyper-V could have a smaller max I/O
size, and the block layer could exceed that max.
Fix this by correctly setting max_sectors as well as sg_tablesize to
reflect the maximum I/O size that Hyper-V reports. While allowing
I/O sizes larger than the block layer default of 512 Kbytes doesn’t
provide any noticeable performance benefit in the tests we ran, it's
still appropriate to report the correct underlying Hyper-V capabilities
to the Linux block layer.
Also tweak the virt_boundary_mask to reflect that the required
alignment derives from Hyper-V communication using a 4 Kbyte page size,
and not on the guest page size, which might be bigger (eg. ARM64).
Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prevent that both the interrupt handler and the reset handler try to
complete a request at the same time. This patch is the result of an
analysis of the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE 5.10.107-android13-4-00051-g1e48e8970cca-ab8664745 #1
pc : ufshcd_release_scsi_cmd+0x30/0x46c
lr : __ufshcd_transfer_req_compl+0x4fc/0x9c0
Call trace:
ufshcd_release_scsi_cmd+0x30/0x46c
__ufshcd_transfer_req_compl+0x4fc/0x9c0
ufshcd_poll+0xf0/0x208
ufshcd_sl_intr+0xb8/0xf0
ufshcd_intr+0x168/0x2f4
__handle_irq_event_percpu+0xa0/0x30c
handle_irq_event+0x84/0x178
handle_fasteoi_irq+0x150/0x2e8
__handle_domain_irq+0x114/0x1e4
gic_handle_irq.31846+0x58/0x300
el1_irq+0xe4/0x1c0
cpuidle_enter_state+0x3ac/0x8c4
do_idle+0x2fc/0x55c
cpu_startup_entry+0x84/0x90
kernel_init+0x0/0x310
start_kernel+0x0/0x608
start_kernel+0x4ec/0x608
Link: https://lore.kernel.org/r/20220613214442.212466-4-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Modify ufshcd_clear_cmd() such that it supports clearing multiple commands
at once instead of one command at a time. This change will be used in a
later patch to reduce the time spent in the reset handler.
Link: https://lore.kernel.org/r/20220613214442.212466-3-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove the local variable 'err'. This patch does not change any
functionality.
Link: https://lore.kernel.org/r/20220613214442.212466-2-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Constify the drv data because it should not be modified (used by multiple
devices).
Link: https://lore.kernel.org/r/20220613101429.114449-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use memset_startat() helper to simplify the code, no functional changes.
Link: https://lore.kernel.org/r/20220613021851.59699-1-xiujianfeng@huawei.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix following coccicheck error:
./drivers/target/iscsi/iscsi_target_nego.c:831:13-26: ERROR: se_nacl is NULL but dereferenced.
Link: https://lore.kernel.org/r/20220613014321.107045-1-yang.lee@linux.alibaba.com
Fixes: a75fcb0912a5 ("scsi: target: iscsi: Extract auth functions")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The kernel returns an endpoint ID as r.ep_connect_ret.handle in the
iscsi_uevent. The iscsid validates a received endpoint ID and treats zero
as an error. The commit referenced in the fixes line changed the endpoint
ID range, and zero is always assigned to the first endpoint ID. So, the
first attempt to create a new iSER connection always fails.
Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com
Fixes: 3c6ae371b8a1 ("scsi: iscsi: Release endpoint ID when its freed")
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add maintainer for Renesas UFS driver.
Link: https://lore.kernel.org/r/20220603110524.1997825-6-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add support for Renesas R-Car UFS controller which needs vendor-specific
initialization.
Link: https://lore.kernel.org/r/20220603110524.1997825-5-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports
auto-hibernate the capability but only FASTAUTO mode.
Link: https://lore.kernel.org/r/20220603110524.1997825-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not
support 64-bit addressing.
Link: https://lore.kernel.org/r/20220603110524.1997825-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Document Renesas R-Car UFS host controller for R-Car S4-8 (r8a779f0).
Link: https://lore.kernel.org/r/20220603110524.1997825-2-yoshihiro.shimoda.uh@renesas.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Adds support of UFS HCI which is found in Tesla Full Self-Driving (FSD)
SoC.
Link: https://lore.kernel.org/r/20220610104119.66401-7-alim.akhtar@samsung.com
Co-developed-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Bit[3] of HCI_CLKSTOP_CTRL register is for enabling/disabling MPHY APB
clock. Lets add it to CLK_STOP_MASK, so that the same can be controlled
during clock masking/unmasking.
Link: https://lore.kernel.org/r/20220610104119.66401-6-alim.akhtar@samsung.com
Tested-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Adds tesla,fsd-ufs compatible for Tesla FSD SoC.
Link: https://lore.kernel.org/r/20220610104119.66401-5-alim.akhtar@samsung.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Similarly to sas report general and discovery responses, define the
structure struct smp_rps_resp to handle SATA PHY report responses using a
structure with a size that is exactly equal to the sas defined response
size.
With this change, struct smp_resp becomes unused and is removed.
Link: https://lore.kernel.org/r/20220609022456.409087-4-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When compiling with gcc 12, several warnings are thrown by gcc when
compiling drivers/scsi/libsas/sas_expander.c, e.g.:
In function ‘sas_get_ex_change_count’,
inlined from ‘sas_find_bcast_dev’ at
drivers/scsi/libsas/sas_expander.c:1816:8:
drivers/scsi/libsas/sas_expander.c:1781:20: warning: array subscript
‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned
char[32]’ [-Warray-bounds]
1781 | if (rg_resp->result != SMP_RESP_FUNC_ACC) {
| ~~~~~~~^~~~~~~~
This is due to the use of the struct smp_resp to aggregate all possible
response types using a union but allocating a response buffer with a size
exactly equal to the size of the response type needed. This leads to access
to fields of struct smp_resp from an allocated memory area that is smaller
than the size of struct smp_resp.
Fix this by defining struct smp_rg_resp for sas report general responses.
Link: https://lore.kernel.org/r/20220609022456.409087-3-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When compiling with gcc 12, several warnings are thrown by gcc when
compiling drivers/scsi/libsas/sas_expander.c, e.g.:
In function ‘sas_get_phy_change_count’,
inlined from ‘sas_find_bcast_phy.constprop’ at
drivers/scsi/libsas/sas_expander.c:1737:9:
drivers/scsi/libsas/sas_expander.c:1697:39: warning: array subscript
‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned
char[56]’ [-Warray-bounds]
1697 | *pcc = disc_resp->disc.change_count;
| ~~~~~~~~~~~~~~~^~~~~~~~~~~~~
This is due to the use of the struct smp_resp to aggregate all possible
response types using a union but allocating a response buffer with a size
exactly equal to the size of the response type needed. This leads to access
to fields of struct smp_resp from an allocated memory area that is smaller
than the size of struct smp_resp.
Fix this by defining struct smp_disc_resp for sas discovery operations.
Since this structure and the generic struct smp_resp are identical for
the little endian and big endian archs, move the definition of these
structures at the end of include/scsi/sas.h to avoid repeating their
definition.
Link: https://lore.kernel.org/r/20220609022456.409087-2-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/20220608115849.16693-11-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
User experience slow recovery when target device went through a stop/start
of the authentication application (app_stop/app_start).
Between the period of app_stop and app_start on the target device, target
device choose to send ELS Reject for any receive AUTH ELS command. At this
time, authentication application does not do ELS reject if it encounters
error.
Therefore, AUTH ELS reject signify authentication application is not
running. If driver passes up the AUTH ELS Reject to the authentication
application, then it would result in authentication application
retrying/resending the same AUTH ELS command again + delay.
As a work around, driver should trigger a session tear down where it tells
the local authentication application to also tear down. At the next
relogin, both sides are then synchronized.
Link: https://lore.kernel.org/r/20220608115849.16693-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For N2N + remote WWPN is bigger than local adapter, remote adapter will
login to local adapter while authentication application is not running.
When authentication application starts, the current session in FW needs to
to be invalidated.
Make sure the old session is torn down before triggering a relogin.
Link: https://lore.kernel.org/r/20220608115849.16693-9-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver failed to send implicit logout on session delete. For edif, this
failed to flush any lingering SA index in FW.
Set a flag to turn on implicit logout early in the session recovery to make
sure the logout will go out in case of error.
Link: https://lore.kernel.org/r/20220608115849.16693-8-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Current code prematurely sends out PRLI before authentication application
has given the OK to do so. This causes PRLI failure and session teardown.
Prevents PRLI from going out before authentication app gives the OK.
Link: https://lore.kernel.org/r/20220608115849.16693-7-njavali@marvell.com
Fixes: 91f6f5fbe87b ("scsi: qla2xxx: edif: Reduce connection thrash")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If all keys for a session have been deleted, trigger a session teardown.
Link: https://lore.kernel.org/r/20220608115849.16693-6-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The scenario is this: User loaded driver but has not started authentication
app. All sessions to secure device will exhaust all login attempts, fail,
and in stay in deleted state. Then some time later the app is started. The
driver will replenish the login retry count, trigger delete to prepare for
secure login. After deletion, relogin is triggered.
For the session that is already deleted, the delete trigger is a no-op. If
none of the sessions trigger a relogin, no progress is made.
Add a relogin trigger.
Link: https://lore.kernel.org/r/20220608115849.16693-5-njavali@marvell.com
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Multiple app start can trigger a session bounce. Make driver skip over
session teardown if app start is seen more than once.
Link: https://lore.kernel.org/r/20220608115849.16693-4-njavali@marvell.com
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If the session is down and the local port continues to receive AUTH ELS
messages, the driver needs to send back LOGO so that the remote device
knows to tear down its session. Terminate and clean up the AUTH ELS
exchange followed by a passthrough LOGO.
Link: https://lore.kernel.org/r/20220608115849.16693-3-njavali@marvell.com
Fixes: 225479296c4f ("scsi: qla2xxx: edif: Reject AUTH ELS on session down")
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The current edif code does not keep track of FW IOCB resources. This led
to IOCB queue full on error recovery (I/O timeout). Make use of the
existing code that tracks IOCB resources to prevent over-subscription.
Link: https://lore.kernel.org/r/20220608115849.16693-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.
Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.
Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix missing resource cleanup (when '(--i) == 0') for error case in
pmcraid_register_interrupt_handler().
Link: https://lore.kernel.org/r/20220529153456.4183738-6-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix missing resource cleanup (when '(--i) == 0') for error case in
ipr_alloc_mem() and skip incorrect resource cleanup (when '(--i) == 0') for
error case in ipr_request_other_msi_irqs() because variable i started from
1.
Link: https://lore.kernel.org/r/20220529153456.4183738-4-cgxu519@mykernel.net
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I'm facing this warning when building for the parisc64 architecture:
drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’:
drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds]
5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ?
drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’
5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
| ^~~~~~~~~~~~~~~~~~~~~~~
The problem is, that only 20 bytes are allocated with kmalloc(), which is
sufficient to hold the bytes which are needed. Nevertheless, gcc complains
because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus
doesn't fit into those 20 bytes.
This patch simply allocates all 32 bytes (instead of 20) and thus avoids
the warning. There is no functional change introduced by this patch.
While touching the code I cleaned up to calculation of max_wideport_qd,
max_narrowport_qd and max_sata_qd to make it easier readable.
Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit
kernel.
Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use ida_alloc()/ida_free() instead of the deprecated
ida_simple_get()/ida_simple_remove() interface.
Link: https://lore.kernel.org/r/20220527083049.2552526-1-liuke94@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: keliu <liuke94@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add acls/{ACL}/attrib/authentication attribute that controls authentication
for particular ACL. By default, this attribute inherits a value of the
authentication attribute of the target port group to keep backward
compatibility.
Authentication attribute has 3 states:
"0" - authentication is turned off for this ACL
"1" - authentication is required for this ACL
"-1" - authentication is inherited from TPG
Link: https://lore.kernel.org/r/20220523095905.26070-4-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Create functions that answers simple questions: Whether authentication is
required, what credentials, whether connection is autenticated.
Link: https://lore.kernel.org/r/20220523095905.26070-3-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
iSCSI target is cluttered with open-coded container_of() conversions from
se_nacl to iscsi_node_acl. The code could be cleaned by introducing a
helper - to_iscsi_nacl() (similar to other helpers in target core).
While at it, make another iSCSI conversion helper consistent and rename
iscsi_tpg() helper to to_iscsi_tpg().
Link: https://lore.kernel.org/r/20220523095905.26070-2-d.bogdanov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/20220607044627.19563-12-njavali@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After initiator has burned up all login retries, target authentication
application begins to run. This triggers a link bounce on target side.
Initiator will attempt another login. Due to N2N, the PRLI [nvme | fcp] can
fail because of the mode mismatch with target. This patch add a few more
login retries to revive the connection.
Link: https://lore.kernel.org/r/20220607044627.19563-11-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
User failed to see disk via n2n topology. Driver used up all login retries
before authentication application started. When authentication application
started, driver did not have enough login retries to connect securely. On
app_start, driver will reset the login retry attempt count.
Link: https://lore.kernel.org/r/20220607044627.19563-10-njavali@marvell.com
Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Recently driver has implemented a new doorbell mechanism via bsg. The new
doorbell tells driver the exact buffer size application has where driver
can fill it up with events. The old doorbell guestimated application buffer
size is 256.
Remove duplicate functionality, the application has moved on to the new
doorbell interface.
Link: https://lore.kernel.org/r/20220607044627.19563-9-njavali@marvell.com
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Relating to EDIF, when sending IKE message, updating key or deleting key,
driver can encounter IOCB queue full. Add additional retries to reduce
higher level recovery.
Link: https://lore.kernel.org/r/20220607044627.19563-8-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Notify authentication application of a NPIV deletion event is about to
occur. This allows app to perform cleanup.
Link: https://lore.kernel.org/r/20220607044627.19563-7-njavali@marvell.com
Fixes: 9efea843a906 ("scsi: qla2xxx: edif: Add detection of secure device")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a thread is in the process of reestablish a session, a flag is set to
prevent multiple threads/triggers from doing the same task. This flag was
left on, and any attempt to relogin was locked out. Clear this flag if the
attempt has failed.
Link: https://lore.kernel.org/r/20220607044627.19563-6-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add bsg interface for app to read doorbell events. This interface lets
driver know how much app can read based on return buffer size. When the
next event(s) occur, driver will return the bsg_job with the event(s) in
the return buffer.
If there is no event to read, driver will hold on to the bsg_job up to few
seconds as a way to control the polling interval.
Link: https://lore.kernel.org/r/20220607044627.19563-5-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On session deletion, wait for app to acknowledge before moving on. This
allows both app and driver to stay in sync. In addition, this gives a
chance for authentication app to do any type of cleanup before moving on.
Link: https://lore.kernel.org/r/20220607044627.19563-4-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
- Add version field to edif bsg for future enhancement.
- Add version edif bsg version check
- Remove unused interfaces and fields.
Link: https://lore.kernel.org/r/20220607044627.19563-3-njavali@marvell.com
Fixes: dd30706e73b7 ("scsi: qla2xxx: edif: Add key update")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch uses GFFID switch command to scan whether remote device is
Target or Initiator mode. Based on that info, driver will not pass up
Initiator info to authentication application. This helps reduce unnecessary
stress for authentication application to deal with unused connections.
Link: https://lore.kernel.org/r/20220607044627.19563-2-njavali@marvell.com
Fixes: 7ebb336e45ef ("scsi: qla2xxx: edif: Add start + stop bsgs")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
