summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-05Merge branch 'pm-pci'Rafael J. Wysocki
Merge a PCI power management regression fix. * pm-pci: PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM
2018-07-05netfilter: x_tables: set module owner for icmp(6) matchesFlorian Westphal
nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-05ieee802154: 6lowpan: set IFLA_LINKLubomir Rintel
Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05ieee802154: mcr20a: add missing includesArnd Bergmann
Without CONFIG_GPIOLIB, some headers are not included implicitly, leading to a build failure: drivers/net/ieee802154/mcr20a.c: In function 'mcr20a_probe': drivers/net/ieee802154/mcr20a.c:1347:13: error: implicit declaration of function 'irq_get_trigger_type'; did you mean 'irq_get_irqchip_state'? [-Werror=implicit-function-declaration] This includes gpio/consumer.h and irq.h directly rather through the gpiolib header. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05nds32: fix build error "relocation truncated to fit: R_NDS32_25_PCREL_RELA" whenGreentime Hu
make allyesconfig It will cause a linking error because the jump assembly code were using j, however it may be not enough to jump to the destination. We have to change it with pseudo instruction b. In that way, assembler will generate a set of safe assembly codes to make sure the destination is able to jump. Toolchain: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-nds32le-linux.tar.gz Command: PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make allyesconfig PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make -j8 MODPOST vmlinux.o WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. nds32le-linux-ld: kernel/futex.o:(.fixup+0x4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xaa): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb0): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb6): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xbc): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xc4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' Makefile:1010: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-07-05samples/bpf: add .gitignore fileTaeung Song
For untracked executables of samples/bpf, add this. Untracked files: (use "git add <file>..." to include in what will be committed) samples/bpf/cpustat samples/bpf/fds_example samples/bpf/lathist samples/bpf/load_sock_ops ... Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the error of write() and read()Taeung Song
test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: Check the result of system()Taeung Song
To avoid the below build warning message, use new generate_load() checking the return value. ignoring return value of ‘system’, declared with attribute warn_unused_result And it also refactors the duplicate code of both test_perf_event_all_cpu() and test_perf_event_task() Cc: Teng Qin <qinteng@fb.com> Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05samples/bpf: add missing <linux/if_vlan.h>Taeung Song
This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05drm/i915/gvt: update vreg on inhibit context lri commandHang Yuan
Commit cd7e 61b9"init mmio by lri command in vgpu inhibit context" initializes registers saved/restored in context with its vreg value through lri command in ring buffer. It relies on vreg got updated on every guest access. There is a case found that Linux guest uses lri command in inhibit-ctx to update the register. This patch adds vreg update on this case. v2: move mmio_attribute functions to gvt.h (Zhenyu) v3: use mask_mmio_write in vreg update v4: refine codes and add more comments (Zhenyu) Fixes: cd7e61b9("drm/i915/gvt: init mmio by lri command in vgpu inhibit context") Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Signed-off-by: Weinan Li <weinan.z.li@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-07-05drm/udl: fix display corruption of the last lineMikulas Patocka
The displaylink hardware has such a peculiarity that it doesn't render a command until next command is received. This produces occasional corruption, such as when setting 22x11 font on the console, only the first line of the cursor will be blinking if the cursor is located at some specific columns. When we end up with a repeating pixel, the driver has a bug that it leaves one uninitialized byte after the command (and this byte is enough to flush the command and render it - thus it fixes the screen corruption), however whe we end up with a non-repeating pixel, there is no byte appended and this results in temporary screen corruption. This patch fixes the screen corruption by always appending a byte 0xAF at the end of URB. It also removes the uninitialized byte. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-05qed: Fix reading stale configuration informationDenis Bolotin
Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: phy: fix flag masking in __set_phy_supportedHeiner Kallweit
Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04arm64: add endianness option to LDFLAGS instead of LDMasahiro Yamada
With the recent syntax extension, Kconfig is now able to evaluate the compiler / toolchain capability. However, accumulating flags to 'LD' is not compatible with the way it works; 'LD' must be passed to Kconfig to call $(ld-option,...) from Kconfig files. If you tweak 'LD' in arch Makefile depending on CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency between Makefile and Kconfig. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04RISC-V: Fix the rv32i kernel buildPalmer Dabbelt
These patches for building 32-bit RISC-V kernel. - Fix the compile errors and warnings on RV32I. - Fix some incompatible problem on RV32I. - Add format.h for compatible of print format. The fixed width integer types format for Elf_Addr will move to generic header by another patch. For now, there are some warning about unexpected argument of type on RV32I. Change in v1: - Fix some error in v1 - Remove implementation of fixed width integer types format for Elf_Addr.
2018-07-04RISC-V: Fix PTRACE_SETREGSET bug.Jim Wilson
In riscv_gpr_set, pass regs instead of &regs to user_regset_copyin to fix gdb segfault. Signed-off-by: Jim Wilson <jimw@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Don't include irq-riscv-intc.hPalmer Dabbelt
This file has never existed in the upstream kernel, but it's guarded by an #ifdef that's also never existed in the upstream kernel. As a part of our interrupt controller refactoring this header is no longer necessary, but this reference managed to sneak in anyway. Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04riscv: remove unnecessary of_platform_populate callRob Herring
The DT core will call of_platform_default_populate, so it is not necessary for arch specific code to call it unless there are custom match entries, auxdata or parent device. Neither of those apply here, so remove the call. Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: linux-riscv@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocationsAndreas Schwab
The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the address of the symbol (without overflow check), not its contents. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Change variable type for 32-bit compatibleZong Li
Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Add definiion of extract symbol's index and type for 32-bitZong Li
Use generic marco to get the index and type of symbol. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Select GENERIC_UCMPDI2 on RV32IZong Li
On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2 symbol. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04RISC-V: Add conditional macro for zone of DMA32Zong Li
The DMA32 is for 64-bit usage. Signed-off-by: Zong Li <zong@andestech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-04sample/vfio-mdev: Change return type to vm_fault_tSouptick Joarder
convert mbochs_region_vm_fault and mbochs_dmabuf_vm_fault to return vm_fault_t type. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-07-04arm64: Use aarch64elf and aarch64elfb emulation mode variantsPaul Kocialkowski
The aarch64linux and aarch64linuxb emulation modes are not supported by bare-metal toolchains and Linux using them forbids building the kernel with these toolchains. Since there is apparently no reason to target these emulation modes, the more generic elf modes are used instead, allowing to build on bare-metal toolchains as well as the already-supported ones. Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64") Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-07-04drm/bridge/sii8620: Fix link mode selectionMaciej Purski
Current link mode values do not allow to enable packed pixel modes. Select packed pixel clock mode, if needed, every time the link mode register gets updated. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-4-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Fix display of packed pixel modesMaciej Purski
Current implementation does not guarantee packed pixel modes working with every dongle. There are some dongles, which require selecting the output mode explicitly. Write proper values to registers in packed_pixel mode, based on how it is done in vendor's code. Select output color space: RGB (no packed pixel) or YCBCR422 (packed pixel). This reverts commit e8b92efa629dac0e70ea4145c5e70616de5f89c8 ("drm/bridge/sii8620: fix display of packed pixel modes in MHL2"). Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-3-git-send-email-m.purski@samsung.com
2018-07-04drm/bridge/sii8620: Send AVI infoframe in all MHL versionsMaciej Purski
Currently AVI infoframe is sent only in MHL3. However, some MHL2 dongles need AVI infoframe to work correctly in either packed pixel mode or non-packed pixel mode. Send AVI infoframe in set_infoframes() in every case. Create an infoframe using drm_hdmi_infoframe_from_display_mode() instead of manually filling each infoframe structure's field. Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1530204243-6370-2-git-send-email-m.purski@samsung.com
2018-07-04USB: serial: cp210x: add another USB ID for Qivicon ZigBee stickOlli Salonen
There are two versions of the Qivicon Zigbee stick in circulation. This adds the second USB ID to the cp210x driver. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-04USB: serial: ch341: fix type promotion bug in ch341_control_in()Dan Carpenter
The "r" variable is an int and "bufsize" is an unsigned int so the comparison is type promoted to unsigned. If usb_control_msg() returns a negative that is treated as a high positive value and the error handling doesn't work. Fixes: 2d5a9c72d0c4 ("USB: serial: ch341: fix control-message error handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2018-07-04smsc75xx: Add workaround for gigabit link up hardware errata.Yuiko Oshino
In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04sctp: fix the issue that pathmtu may be set lower than MINSEGMENTXin Long
After commit b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs"), sctp_transport_update_pmtu would refetch pathmtu from the dst and set it to transport's pathmtu without any check. The new pathmtu may be lower than MINSEGMENT if the dst is obsolete and updated by .get_dst() in sctp_transport_update_pmtu. In this case, it could have a smaller MTU as well, and thus we should validate it against MINSEGMENT instead. Syzbot reported a warning in sctp_mtu_payload caused by this. This patch refetches the pathmtu by calling sctp_dst_mtu where it does the check against MINSEGMENT. v1->v2: - refetch the pathmtu by calling sctp_dst_mtu instead as Marcelo's suggestion. Fixes: b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs") Reported-by: syzbot+f0d9d7cba052f9344b03@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04ACPI / battery: Safe unregistering of hooksJouke Witteveen
A hooking API was implemented for 4.17 in fa93854f7a7ed63d followed by hooks for Thinkpad laptops in 2801b9683f740012. The Thinkpad drivers did not support the Thinkpad 13 and the hooking API crashes on unsupported batteries by altering a list of hooks during unsafe iteration. Thus, Thinkpad 13 laptops could no longer boot. Additionally, a lock was kept in place and debugging information was printed out of order. Fixes: fa93854f7a7e (battery: Add the battery hooking API) Cc: 4.17+ <stable@vger.kernel.org> # 4.17+ Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-04drm/amdgpu: fix user fence write race conditionNicolai Hähnle
The buffer object backing the user fence is reserved using the non-user fence, i.e., as soon as the non-user fence is signaled, the user fence buffer object can be moved or even destroyed. Therefore, emit the user fence first. Both fences have the same cache invalidation behavior, so this should have no user-visible effect. Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-07-04s390: wire up rseq system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04s390: wire up io_pgetevents system callHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-04net/ipv6: Revert attempt to simplify route replace and appendDavid Ahern
NetworkManager likes to manage linklocal prefix routes and does so with the NLM_F_APPEND flag, breaking attempts to simplify the IPv6 route code and by extension enable multipath routes with device only nexthops. Revert f34436a43092 and these followup patches: 6eba08c3626b ("ipv6: Only emit append events for appended routes"). ce45bded6435 ("mlxsw: spectrum_router: Align with new route replace logic") 53b562df8c20 ("mlxsw: spectrum_router: Allow appending to dev-only routes") Update the fib_tests cases to reflect the old behavior. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: David Ahern <dsahern@gmail.com>
2018-07-04gen_stats: Fix netlink stats dumping in the presence of paddingToke Høiland-Jørgensen
The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Tested-by: Pete Heist <pete@heistp.net> Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net: phy: marvell: change default m88e1510 LED configurationWang Dongsheng
The m88e1121 LED default configuration does not apply m88e151x. So add a function to relpace m88e1121 LED configuration. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03mm: teach dump_page() to correctly output poisoned struct pagesPavel Tatashin
If struct page is poisoned, and uninitialized access is detected via PF_POISONED_CHECK(page) dump_page() is called to output the page. But, the dump_page() itself accesses struct page to determine how to print it, and therefore gets into a recursive loop. For example: dump_page() __dump_page() PageSlab(page) PF_POISONED_CHECK(page) VM_BUG_ON_PGFLAGS(PagePoisoned(page), page) dump_page() recursion loop. Link: http://lkml.kernel.org/r/20180702180536.2552-1-pasha.tatashin@oracle.com Fixes: f165b378bbdf ("mm: uninitialized struct page poisoning sanity checking") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03ARM: disable KCOV for trusted foundations codeArnd Bergmann
The ARM trusted foundations code is currently broken in linux-next when CONFIG_KCOV_INSTRUMENT_ALL is set: /tmp/ccHdQsCI.s: Assembler messages: /tmp/ccHdQsCI.s:37: Error: .err encountered /tmp/ccHdQsCI.s:38: Error: .err encountered /tmp/ccHdQsCI.s:39: Error: .err encountered scripts/Makefile.build:311: recipe for target 'arch/arm/firmware/trusted_foundations.o' failed I could not find a function attribute that lets me disable -fsanitize-coverage=trace-pc for just one function, so this turns it off for the entire file instead. Link: http://lkml.kernel.org/r/20180529103636.1535457-1-arnd@arndb.de Fixes: 758517202bd2e4 ("arm: port KCOV to arm") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03kasan: fix shadow_size calculation error in kasan_module_allocZhen Lei
There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT) Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the roundup operation can not retrieve the missed one page. For example: size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get shadow_size=0x5000, but actually we need 6 pages. shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE); This can lead to a kernel crash when kasan is enabled and the value of mod->core_layout.size or mod->init_layout.size is like above. Because the shadow memory of X has not been allocated and mapped. move_module: ptr = module_alloc(mod->core_layout.size); ... memset(ptr, 0, mod->core_layout.size); //crashed Unable to handle kernel paging request at virtual address ffff0fffff97b000 ...... Call trace: __asan_storeN+0x174/0x1a8 memset+0x24/0x48 layout_and_allocate+0xcd8/0x1800 load_module+0x190/0x23e8 SyS_finit_module+0x148/0x180 Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Dmitriy Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Libin <huawei.libin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03mm: hugetlb: yield when prepping struct pagesCannon Matthews
When booting with very large numbers of gigantic (i.e. 1G) pages, the operations in the loop of gather_bootmem_prealloc, and specifically prep_compound_gigantic_page, takes a very long time, and can cause a softlockup if enough pages are requested at boot. For example booting with 3844 1G pages requires prepping (set_compound_head, init the count) over 1 billion 4K tail pages, which takes considerable time. Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to prevent this lockup. Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and no softlockup is reported, and the hugepages are reported as successfully setup. Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com Signed-off-by: Cannon Matthews <cannonmatthews@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03userfaultfd: hugetlbfs: fix userfaultfd_huge_must_wait() pte accessJanosch Frank
Use huge_ptep_get() to translate huge ptes to normal ptes so we can check them with the huge_pte_* functions. Otherwise some architectures will check the wrong values and will not wait for userspace to bring in the memory. Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03tracing: Fix missing return symbol in function_graph outputChangbin Du
The function_graph tracer does not show the interrupt return marker for the leaf entry. On leaf entries, we see an unbalanced interrupt marker (the interrupt was entered, but nevern left). Before: 1) | SyS_write() { 1) | __fdget_pos() { 1) 0.061 us | __fget_light(); 1) 0.289 us | } 1) | vfs_write() { 1) 0.049 us | rw_verify_area(); 1) + 15.424 us | __vfs_write(); 1) ==========> | 1) 6.003 us | smp_apic_timer_interrupt(); 1) 0.055 us | __fsnotify_parent(); 1) 0.073 us | fsnotify(); 1) + 23.665 us | } 1) + 24.501 us | } After: 0) | SyS_write() { 0) | __fdget_pos() { 0) 0.052 us | __fget_light(); 0) 0.328 us | } 0) | vfs_write() { 0) 0.057 us | rw_verify_area(); 0) | __vfs_write() { 0) ==========> | 0) 8.548 us | smp_apic_timer_interrupt(); 0) <========== | 0) + 36.507 us | } /* __vfs_write */ 0) 0.049 us | __fsnotify_parent(); 0) 0.066 us | fsnotify(); 0) + 50.064 us | } 0) + 50.952 us | } Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com Cc: stable@vger.kernel.org Fixes: f8b755ac8e0cc ("tracing/function-graph-tracer: Output arrows signal on hardirq call/return") Signed-off-by: Changbin Du <changbin.du@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03ftrace: Nuke clear_ftrace_functionYisheng Xie
clear_ftrace_function is not used outside of ftrace.c and is not help to use a function, so nuke it per Steve's suggestion. Link: http://lkml.kernel.org/r/1517537689-34947-1-git-send-email-xieyisheng1@huawei.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03tracing: Use __printf markup to silence compilerMathieu Malaterre
Silence warnings (triggered at W=1) by adding relevant __printf attributes. CC kernel/trace/trace.o kernel/trace/trace.c: In function ‘__trace_array_vprintk’: kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args); ^~~ AR kernel/trace/built-in.o Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03tracing: Optimize trace_buffer_iter() logicyuan linyu
Simplify and optimize the logic in trace_buffer_iter() to use a conditional operation instead of an if conditional. Link: http://lkml.kernel.org/r/20180408113631.3947-1-cugyly@163.com Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03tracing: Make create_filter() code match the commentsSteven Rostedt (VMware)
The comment in create_filter() states that the passed in filter pointer (filterp) will either be NULL or contain an error message stating why the filter failed. But it also expects the filter pointer to point to NULL when passed in. If it is not, the function create_filter_start() will warn and return an error message without updating the filter pointer. This is not what the comment states. As we always expect the pointer to point to NULL, if it is not, trigger a WARN_ON(), set it to NULL, and then continue the path as the rest will work as the comment states. Also update the comment to state it must point to NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-03tracing: Avoid string overflowArnd Bergmann
'err' is used as a NUL-terminated string, but using strncpy() with the length equal to the buffer size may result in lack of the termination: kernel/trace/trace_events_hist.c: In function 'hist_err_event': kernel/trace/trace_events_hist.c:396:3: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation] strncpy(err, var, MAX_FILTER_STR_VAL); This changes it to use the safer strscpy() instead. Link: http://lkml.kernel.org/r/20180328140920.2842153-1-arnd@arndb.de Cc: stable@vger.kernel.org Fixes: f404da6e1d46 ("tracing: Add 'last error' error facility for hist triggers") Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit (git 2.34.1) at 2025-09-12 20:53:12 +0000