summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-09[CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for ↵venkatesh.pallipadi@intel.com
idle-microaccounting Preparatory changes for doing idle micro-accounting in ondemand governor. get_cpu_idle_time() gets extra parameter and returns idle time and also the wall time that corresponds to the idle time measurement. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software ↵venkatesh.pallipadi@intel.com
coordination Change the load calculation algorithm in ondemand to work well with software coordination of frequency across the dependent cpus. Multiply individual CPU utilization with the average freq of that logical CPU during the measurement interval (using getavg call). And find the max CPU utilization number in terms of CPU freq. That number is then used to get to the target freq for next sampling interval. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()venkatesh.pallipadi@intel.com
Add a cpu parameter to __cpufreq_driver_getavg(). This is needed for software cpufreq coordination where policy->cpu may not be same as the CPU on which we want to getavg frequency. A follow-on patch will use this parameter to getavg freq from all cpus in policy->cpus. Change since last patch. Fix the offline/online and suspend/resume oops reported by Youquan Song <youquan.song@intel.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] use deferrable delayed work init in conservative governorBen Slusky
Venki Pallipadi made a similar change to the ondemand governor a while back (in commit 28287033e12463c8ff89f1ea8038783d0360391c). It seems to work just as well in the conservative governor, leading to fewer wakeups as reported by powertop. Signed-off-by: Ben Slusky <sluskyb@paranoiacs.org> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving ↵Julia Lawall
cpufreq_cpu_put After calling cpufreq_cpu_get, error handling code should call cpufreq_cpu_put. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S; position p1,p2,p3; @@ ( if ((x = cpufreq_cpu_get@p1(...)) == NULL || ...) S | x = cpufreq_cpu_get@p1(...) ... when != x if (x == NULL || ...) S ) <... if@p3 (...) { ... when != cpufreq_cpu_put(x) when != if (x) { ... cpufreq_cpu_put(x); ...} return@p2 ...; } ...> ( return x; | return 0; | x = E | E = x | cpufreq_cpu_put(x) ) @exists@ position r.p1,r.p2,r.p3; expression x; int ret != 0; statement S; @@ * x = cpufreq_cpu_get@p1(...) <... * if@p3 (...) S ...> * return@p2 \(NULL\|ret\); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] add error handling for cpufreq_register_governor() errorAkinobu Mita
Add error handling for cpufreq_register_governor() error Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: cpufreq@lists.linux.org.uk Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() errorAkinobu Mita
add error handling for cpufreq_register_driver() error Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: cpufreq@lists.linux.org.uk Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.cPaolo Ciarrocchi
Before: total: 11 errors, 15 warnings, 255 lines checked After: total: 0 errors, 6 warnings, 254 lines checked paolo@paolo-desktop:~/linux.trees.git$ md5sum /tmp/powernow-k6.o.* 476932f5e1ffe365db9d1dfb3f860369 /tmp/powernow-k6.o.after 476932f5e1ffe365db9d1dfb3f860369 /tmp/powernow-k6.o.before Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.cPaolo Ciarrocchi
Before: total: 15 errors, 10 warnings, 308 lines checked After: total: 0 errors, 4 warnings, 308 lines checked paolo@paolo-desktop:~/linux.trees.git$ md5sum /tmp/elafreq.o.* add1d36c2f077c5aab7682e8642a9f34 /tmp/elafreq.o.after add1d36c2f077c5aab7682e8642a9f34 /tmp/elafreq.o.before paolo@paolo-desktop:~/linux.trees.git$ size /tmp/elafreq.o.* text data bss dec hex filename 934 270 4 1208 4b8 /tmp/elafreq.o.after 934 270 4 1208 4b8 /tmp/elafreq.o.before Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09[CPUFREQ] correct broken links and email addressesNémeth Márton
Replace the no longer working links and email address in the documentation and in source code. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-09phylib: two dynamic mii_bus allocation fallout fixesLennert Buytenhek
1. arch/powerpc/platforms/pasemi/gpio_mdio.c also needs to be converted over to mdiobus_{alloc,free}(). 2. drivers/net/phy/fixed.c used to embed a struct mii_bus into its struct fixed_mdio_bus and then use container_of() to go from the former to the latter. Since mii bus structures are no longer embedded, we need to do something like use the mii bus private pointer to go from mii_bus to fixed_mdio_bus instead. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-09sched debug: add name to sched_domain sysctl entriesIngo Molnar
add /proc/sys/kernel/sched_domain/cpu0/domain0/name, to make it easier to see which specific scheduler domain remained at that entry. Since we process the scheduler domain tree and simplify it, it's not always immediately clear during debugging which domain came from where. depends on CONFIG_SCHED_DEBUG=y. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-09[ARM] 5239/1: Palm Zire 72 power management supportSergey Lapin
This patch contains Palm Zire 72 power management support. Depends on #5238/1 Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09[ARM] 5298/1: Drop desc_handle_irq()Dmitry Baryshkov
desc_handle_irq() was declared as obsolete since long ago. Replace it with generic_handle_irq() Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32XAlistair John Strachan
Enable driver checking of the DMI product name (when enabled) on an Abit AT8 32X, instead of falling back to a manual probe. This eliminates false negatives and eventually will help avoid unnecessary bus probes on unsupported mainboards. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Daniel Exner <dex@dragonslave.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32XAlistair John Strachan
The table for the Abit AT8 32X was incorrectly missing an entry for the sixth ("AUX3") fan. Add this entry, exporting the fan reading to userspace. Closes lm-sensors.org ticket #2339. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Daniel Exner <dex@dragonslave.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: (adt7473) Fix some bogosity in documentation fileDarrick J. Wong
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: Define sysfs interface for energy consumption registerDarrick J. Wong
Describe the sysfs files that were introduced in the ibmaem driver. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: (it87) Prevent power-off on Shuttle SN68PTJean Delvare
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349 Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09eeepc-laptop: Fix hwmon interfaceCorentin Chary
Creates a name file in the sysfs directory, that is needed for the libsensors library to work. Also rename fan1_pwm to pwm1 and scale its value as needed. This fixes bug #11520: http://bugzilla.kernel.org/show_bug.cgi?id=11520 Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09xen: use spin_lock_nest_lock when pinning a pagetableJeremy Fitzhardinge
When pinning/unpinning a pagetable with split pte locks, we can end up holding multiple pte locks at once (we need to hold the locks while there's a pending batched hypercall affecting the pte page). Because all the pte locks are in the same lock class, lockdep thinks that we're potentially taking a lock recursively. This warning is spurious because we always take the pte locks while holding mm->page_table_lock. lockdep now has spin_lock_nest_lock to express this kind of dominant lock use, so use it here so that lockdep knows what's going on. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-09[ARM] 5297/1: [KS8695] Fix two compile-time warningsAndrew Victor
Fix two warnings when compiling for the KS8695 processor. arch/arm/include/asm/dma-mapping.h: In function 'dma_to_virt': arch/arm/include/asm/dma-mapping.h:40: warning: return makes pointer from integer without a cast Section mismatch in reference from the function pcibios_fixup_bus() to the (unknown reference) .devinit.text:(unknown) The function pcibios_fixup_bus() references the (unknown reference) __devinit (unknown). This is often because pcibios_fixup_bus lacks a __devinit annotation or the annotation of (unknown) is wrong. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09[ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.Andrew Victor
Replace Macro names that have trailing underscores. Also use the IOPD() macro instead of a hard-coded bit-shift (for better readability). Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09block_dev: fix kernel-doc in new functionsRandy Dunlap
Fix kernel-doc in new functions: Error(mmotm-2008-1002-1617//fs/block_dev.c:895): duplicate section name 'Description' Error(mmotm-2008-1002-1617//fs/block_dev.c:924): duplicate section name 'Description' Warning(mmotm-2008-1002-1617//fs/block_dev.c:1282): No description found for parameter 'pathname' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: add some comments around the bio read-write flagsJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: mark bio_split_pool staticDenis ChengRq
Since all bio_split calls refer the same single bio_split_pool, the bio_split function can use bio_split_pool directly instead of the mempool_t parameter; then the mempool_t parameter can be removed from bio_split param list, and bio_split_pool is only referred in fs/bio.c file, can be marked static. Signed-off-by: Denis ChengRq <crquan@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: Find bio sector offset given idx and offsetMartin K. Petersen
Helper function to find the sector offset in a bio given bvec index and page offset. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: gendisk integrity wrapperMartin K. Petersen
This is a wrapper for accessing a gendisk's integrity bits. It allows the integrity support in MD to be compiled with BLK_DEV_INTEGRITY off. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: Switch blk_integrity_compare from bdev to gendiskMartin K. Petersen
The DM and MD integrity support now depends on being able to use gendisks instead of block_devices when comparing integrity profiles. Change function parameters accordingly. Also update comparison logic so that two NULL profiles are a valid configuration. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: Fix double put in blk_integrity_unregisterMartin K. Petersen
- kobject_del already puts the parent. - Set integrity profile to NULL to prevent stale data. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: Introduce integrity data ownership flagMartin K. Petersen
A filesystem might supply its own integrity metadata. Introduce a flag that indicates whether the filesystem or the block layer owns the integrity buffer. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: revert part of d7533ad0e132f92e75c1b2eb7c26387b25a583c1Jens Axboe
We need bdev_get_integrity() to support the pending md/dm patches. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09bio.h: Remove unused conditional codeAlberto Bertogli
The whole bio_integrity() definition is inside an #ifdef CONFIG_BLK_DEV_INTEGRITY, there's no need for the conditional code. Signed-off-by: Alberto Bertogli <albertito@blitiri.com.ar> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: remove end_{queued|dequeued}_request()Kiyoshi Ueda
This patch removes end_queued_request() and end_dequeued_request(), which are no longer used. As a results, users of __end_request() became only end_request(). So the actual code in __end_request() is moved to end_request() and __end_request() is removed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: change elevator to use __blk_end_request()Kiyoshi Ueda
This patch converts elevator to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' arguments is converted to 'error'. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09gdrom: change to use __blk_end_request()Kiyoshi Ueda
This patch converts gdrom to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. gd.transfer is '1' in error cases and '0' in non-error cases, so gdrom hasn't been propagating any error code to the block layer. We can just convert error cases to '-EIO'. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09memstick: change to use __blk_end_request()Kiyoshi Ueda
This patch converts memstick to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09virtio_blk: change to use __blk_end_request()Kiyoshi Ueda
This patch converts virtio_blk to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' argument is converted to 'error'. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structureJens Axboe
Define as 32, which is is what BDEVNAME_SIZE is/was as well. This keeps the user interface the same and gets rid of the difference between kernel and user api here. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: add lld busy state exporting interfaceKiyoshi Ueda
This patch adds an new interface, blk_lld_busy(), to check lld's busy state from the block layer. blk_lld_busy() calls down into low-level drivers for the checking if the drivers set q->lld_busy_fn() using blk_queue_lld_busy(). This resolves a performance problem on request stacking devices below. Some drivers like scsi mid layer stop dispatching request when they detect busy state on its low-level device like host/target/device. It allows other requests to stay in the I/O scheduler's queue for a chance of merging. Request stacking drivers like request-based dm should follow the same logic. However, there is no generic interface for the stacked device to check if the underlying device(s) are busy. If the request stacking driver dispatches and submits requests to the busy underlying device, the requests will stay in the underlying device's queue without a chance of merging. This causes performance problem on burst I/O load. With this patch, busy state of the underlying device is exported via q->lld_busy_fn(). So the request stacking driver can check it and stop dispatching requests if busy. The underlying device driver must return the busy state appropriately: 1: when the device driver can't process requests immediately. 0: when the device driver can process requests immediately, including abnormal situations where the device driver needs to kill all requests. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: Fix blk_start_queueing() to not kick a stopped queueElias Oltmanns
blk_start_queueing() should act like the generic queue unplugging and kicking and ignore a stopped queue. Such a queue may not be run until after a call to blk_start_queue(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09include blktrace_api.h in headers_installSven Schuetz
This header file is of interest for user space programming, i.e. for tools that process blktrace data. We would like to use it for a tool on-top of blktrace which processes data provided by blktrace. For this purpose, it would be helpful if the blktrace API would make it to /usr/include/linux. The git tree for the blktrace tools comes with its own copy of this header file. I didn't manage to replace that copy with the file generated by the patch below yet. A few more cleanups would be needed. For example, the blktrace ioctl numbers, which are currently defined in usr/include/fs.h, might need to be moved. Should be feasible, though. Signed-off-by: Sven Schuetz <sven@linux.vnet.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: reserve some tags just for sync IOJens Axboe
By only allowing async IO to consume 3/4 ths of the tag depth, we always have slots free to serve sync IO. This is important to avoid having writes fill the entire tag queue, thus starving reads. Original patch and idea from Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: as/cfq ssd idle check updateJens Axboe
We really need to know about the hardware tagging support as well, since if the SSD does not do tagging then we still want to idle. Otherwise have the same dependent sync IO vs flooding async IO problem as on rotational media. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09libata: set queue SSD flag for SSD devicesJens Axboe
SSD devices should give an RPM setting of 1 in word 217 of the ID page. If we see such a device, tell the block layer about it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: add queue flag for SSD/non-rotational devicesJens Axboe
We don't want to idle in AS/CFQ if the device doesn't have a seek penalty. So add a QUEUE_FLAG_NONROT to indicate a non-rotational device, low level drivers should set this flag upon discovery of an SSD or similar device type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09floppy: support arbitrary first-sector numbersKeith Wansbrough
The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09drivers/block: Use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09cciss: Fix cciss SCSI rescan code to better notice device changesscameron@beardog.cca.cpqcorp.net
Fix cciss SCSI rescan code to better notice device changes. If you hot-unplug a tape drive, then hot-plug a different tape drive into the same slot in a storage enclosure, the cciss driver wouldn't notice anything had changed, as it was only looking at the LUN address and device type. Now it looks at the inquiry page 0x83 device identifier, and vendor and model strings as well. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09fix an example of scatterlists handling in DMA-API.txtFUJITA Tomonori
This example isn't the proper way to handle scatterlists (can't handle sg chaining). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-19 00:20:40 +0000