summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-29iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity ↵Yasin Lee
sensor A SAR sensor from NanjingTianyihexin Electronics Ltd. The device has the following entry points: Usual frequency: - sampling_frequency Instant reading of current values for different sensors: - in_proximity0_raw - in_proximity1_raw - in_proximity2_raw - in_proximity3_raw - in_proximity4_raw and associated events in events/ Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-3-c030f1801d9b@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: iio: proximity: Add TYHX HX9023SYasin Lee
A capacitive proximity sensor Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-2-c030f1801d9b@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: vendor-prefixes: add tyhxYasin Lee
Add vendor prefix for NanjingTianyihexin Electronics Ltd. http://www.tianyihexin.com Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-1-c030f1801d9b@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: dac: ti-dac7311: Add check for spi_setupChen Ni
Add check for the return value of spi_setup() and return the error if it fails in order to catch the error. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://patch.msgid.link/20240705084250.3006527-1-nichen@iscas.ac.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad7606: switch mutexes to guardGuillaume Stols
Switching to guard simplifies the code and avoids to take care to unlock the mutex in case of premature return. Signed-off-by: Guillaume Stols <gstols@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad7606: fix standby gpio state to match the documentationGuillaume Stols
The binding's documentation specifies that "As the line is active low, it should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled the opposite way. This commit sets the driver's behaviour in sync with the documentation Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API") Signed-off-by: Guillaume Stols <gstols@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad7606: fix oversampling gpio arrayGuillaume Stols
gpiod_set_array_value was misused here: the implementation relied on the assumption that an unsigned long was required for each gpio, while the function expects a bit array stored in "as much unsigned long as needed for storing one bit per GPIO", i.e it is using a bit field. This leaded to incorrect parameter passed to gpiod_set_array_value, that would set 1 value instead of 3. It also prevents to select the software mode correctly for the AD7606B. Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC") Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro") Signed-off-by: Guillaume Stols <gstols@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: iio: adc: adi,ad7606: add conditionsGuillaume Stols
Since the driver supports several parts that present differences in their layout and behaviour, it is necessary to describe the differences from one chip to another. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Guillaume Stols <gstols@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: iio: adc: adi,ad7606: fix exampleGuillaume Stols
Example uses adi,ad7606-8 as compatible, but adi,sw-mode is not available for it. So remove this property from example. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Guillaume Stols <gstols@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: iio: adc: adi,ad7606: add supply propertiesGuillaume Stols
Add voltage supplies Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Guillaume Stols <gstols@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: iio: adc: adi,ad7606: improve descriptionsGuillaume Stols
Reword a few descriptions, and normalize the text width to 80 characters. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Guillaume Stols <gstols@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: iio: adc: adi,ad7606: normalize textwidthGuillaume Stols
Normalize textwidth to 80 columns on the descriptions. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Guillaume Stols <gstols@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad9467: support new partsNuno Sa
Add support for new devices: * Analog Devices AD9652 16-bit 310 MSPS ADC; * Analog Devices AD9643 14-Bit, 170/210/250 MSPS ADC; * Analog Devices AD9649 14-bit 20/40/65/80 MSPS ADC. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-5-f1adfee921f7@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29dt-bindings: adc: ad9467: support new partsNuno Sa
Add support for new devices: * Analog Devices AD9652 16-bit 310 MSPS ADC; * Analog Devices AD9643 14-Bit, 170/210/250 MSPS ADC; * Analog Devices AD9649 14-bit 20/40/65/80 MSPS ADC. Note all these parts have subtle differences in their programming model (different scales, number of channels, etc..) so fallbacks are not possible. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-4-f1adfee921f7@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad9467: don't allow reading vref if not availableNuno Sa
If there's only one possible scale, there's no way to change the Vref select in the device so avoid reading the register in ad9467_get_scale(). In this case, it makes no sense to provide the .read_available() callback nor allowing for writing the scale attribute. Note this is in preparation for supporting a new device that only has one possible scale. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-3-f1adfee921f7@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad9467: add new chip_info variablesNuno Sa
Add new variables to the per chip info structure: * test_points: Number of valid test points for calibration; * has_dco_invert: Supports inverting DCO (Data clock output) polarity; * dco_en: Specicic mask to enable DCO delays. This is in preparation for supporting new parts with subtle differences in how to configure the hardware. Note that with the new test_points variable, we also add a new calib_map_size to 'struct ad9467_state' so we know our map size depending on how many test points we have and if we can run the calibration in the inverted state or not. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-2-f1adfee921f7@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad9467: support multiple channels calibrationNuno Sa
The calibration process mixes the support for calibrating multiple channels with only having one channel. Some paths do have 'num_channels' into account while others don't. As of now, the driver only supports devices with one channel so the above is not really a problem. That said, we'll add support for devices with more than one channel, hence let's properly make the calibration process to work with it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240704-dev-iio-ad9467-new-devs-v1-1-f1adfee921f7@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ti-tsc2046: simplify with cleanup.hKrzysztof Kozlowski
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-5-77114c7e84c5@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: max1363: simplify with cleanup.hKrzysztof Kozlowski
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-4-77114c7e84c5@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: at91: simplify with cleanup.hKrzysztof Kozlowski
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-3-77114c7e84c5@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad7280a: simplify with cleanup.hKrzysztof Kozlowski
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-2-77114c7e84c5@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: bma400: simplify with cleanup.hKrzysztof Kozlowski
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240705-cleanup-h-iio-v1-1-77114c7e84c5@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: pressure: bmp280: Constify struct regmap_busJavier Carrasco
`bmp280_regmap_bus` and `bmp380_regmap_bus` are conditionally assigned to `bmp_regmap_bus`, which is only used to pass the struct as a read-only member. Add the const modifier to the structs and the pointer to move the data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Tested-By: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-10-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: light: gp2ap002: Constify struct regmap_busJavier Carrasco
`gp2ap002_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-9-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: imu: bno055: Constify struct regmap_busJavier Carrasco
`bno055_ser_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-8-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: imu: bmi323: Constify struct regmap_busJavier Carrasco
`bmi323_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-7-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: dac: ltc2688: Constify struct regmap_busJavier Carrasco
`ltc2688_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-6-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: chemical: bme680: Constify struct regmap_busJavier Carrasco
`bme680_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Tested-By: Vasileios Amoiridis <vassilisamir@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-5-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad7091r8: Constify struct regmap_busJavier Carrasco
`ad7091r8_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-4-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: bmi088: Constify struct regmap_busJavier Carrasco
`bmi088_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-3-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: bma400: Constify struct regmap_busJavier Carrasco
`bma400_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-2-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: adxl367: Constify struct regmap_busJavier Carrasco
`adxl367_spi_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240703-iio-cont-regmap_bus-v1-1-34754f355b65@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: imu: adis16480: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-20-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: imu: adis16475: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-19-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: at91_adc: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-18-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad_sigma_delta: use new '.masklength' accessorsNuno Sa
Make use of iio_get_masklength) and iio_for_each_active_channel() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-17-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad799x: make use of iio_get_masklength()Nuno Sa
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-16-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad7298: make use of iio_get_masklength()Nuno Sa
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-15-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: adc: ad7266: make use of iio_get_masklength()Nuno Sa
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-14-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: stk8ba50: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-13-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: stk8312: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-12-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: sca3300: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-11-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: msa311: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-10-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: fxls8962af-core: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-9-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: cros_ec_accel_legacy: make use of iio_get_masklength()Nuno Sa
Ue iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-8-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: bmc150-accel-core: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-7-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: bma180: make use of iio_for_each_active_channel()Nuno Sa
Use iio_for_each_active_channel() to iterate over active channels accessing '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-6-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: adxl372: make use of iio_get_masklength()Nuno Sa
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-5-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: accel: adxl367: make use of iio_get_masklength()Nuno Sa
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-4-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-29iio: buffer: make use of iio_get_masklength()Nuno Sa
Use iio_get_masklength() to access '.masklength' so it can be annotated as __private when there are no more direct users of it. While at it, remove some unneeded line breaks. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <aardelean@baylibre.com> Link: https://patch.msgid.link/20240702-dev-iio-masklength-private-v1-3-98193bf536a6@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-09-22 02:25:51 +0000