summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-08-20Merge tag 'mlx5-updates-2017-08-17-V2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-08-17 Some updates for mlx5 ethernet and IPoIB device driver. Eran added the support for manage physical link state from netdevice upon interface open/close requests. Feras fixed the driver name showed in ethtool for IPoIB interfaces. Shalom Added the support for IPoIB netdevice ethtool get link settings. Gal and Eran exposed new diagnostic counters for outbound PCIe stalls and overflow and RX buffer fullness statistics. Code cleanups from Or Gerlitz. Variable types cleanup from Gal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20Linux 4.13-rc6v4.13-rc6Linus Torvalds
2017-08-20Sanitize 'move_pages()' permission checksLinus Torvalds
The 'move_paghes()' system call was introduced long long ago with the same permission checks as for sending a signal (except using CAP_SYS_NICE instead of CAP_SYS_KILL for the overriding capability). That turns out to not be a great choice - while the system call really only moves physical page allocations around (and you need other capabilities to do a lot of it), you can check the return value to map out some the virtual address choices and defeat ASLR of a binary that still shares your uid. So change the access checks to the more common 'ptrace_may_access()' model instead. This tightens the access checks for the uid, and also effectively changes the CAP_SYS_NICE check to CAP_SYS_PTRACE, but it's unlikely that anybody really _uses_ this legacy system call any more (we hav ebetter NUMA placement models these days), so I expect nobody to notice. Famous last words. Reported-by: Otto Ebeling <otto.ebeling@iki.fi> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-20ieee802154: ca8210: Fix a potential NULL pointer dereferenceChristophe JAILLET
'spi' is known to be NULL, so we dereference a NULL pointer here. Use 'pr_crit()' instead of 'dev_crit()' to report the message. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-08-20Merge tag 'fixes-for-4.13b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.13 cycle. Given the late stage of this series, some more involved fixes have been held back for the upcoming merge window. The hid-sensor issue has been causing problems for a long time so it is great to have that one finally fixed! No more bug reports for the userspace guys (well about that anyway). * documentation - some warning fixes due to missing colons in kernel-doc. * adis16480 - fix accel scale factor. * bmp280 - properly initialize the device for humidity readings - without this the humidity readings may be skipped and a magic value of 0x8000 returned. * hid-sensor-strigger - fix a race with user space when powering up the sensor. * ina291 - Avoid an underflow for the sleeping time as a result of supporting the fastest rates. * st-magnetometer - Fix the status register address for hte LSM303AGR, - Remove the ihl property for LSM303AGR as the sensor doesn't support active low for the dataready line. * stm32-adc - Fix use of a common clock rate. * stm32-timer - fix the quadrature mode get routine to account for the magic 0 value. set on boot. - fix the return value of write_raw, - fix the get/set down count direction as the enum value was not being converted to the relevant bit field, - add an enable attribute to actually turn it on when in encoder mode, - missing mask when reading the trigger mode.
2017-08-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Another pile of small fixes and updates for x86: - Plug a hole in the SMAP implementation which misses to clear AC on NMI entry - Fix the norandmaps/ADDR_NO_RANDOMIZE logic so the command line parameter works correctly again - Use the proper accessor in the startup64 code for next_early_pgt to prevent accessing of invalid addresses and faulting in the early boot code. - Prevent CPU hotplug lock recursion in the MTRR code - Unbreak CPU0 hotplugging - Rename overly long CPUID bits which got introduced in this cycle - Two commits which mark data 'const' and restrict the scope of data and functions to file scope by making them 'static'" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Constify attribute_group structures x86/boot/64/clang: Use fixup_pointer() to access 'next_early_pgt' x86/elf: Remove the unnecessary ADDR_NO_RANDOMIZE checks x86: Fix norandmaps/ADDR_NO_RANDOMIZE x86/mtrr: Prevent CPU hotplug lock recursion x86: Mark various structures and functions as 'static' x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag x86/smpboot: Unbreak CPU0 hotplug x86/asm/64: Clear AC on NMI entries
2017-08-20Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A few small fixes for timer drivers: - Prevent infinite recursion in the arm architected timer driver with ftrace - Propagate error codes to the caller in case of failure in EM STI driver - Adjust a bogus loop iteration in the arm architected timer driver - Add a missing Kconfig dependency to the pistachio clocksource to prevent build failures - Correctly check for IS_ERR() instead of NULL in the shared timer-of code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Avoid infinite recursion when ftrace is enabled clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies clocksource/drivers/timer-of: Checking for IS_ERR() instead of NULL clocksource/drivers/em_sti: Fix error return codes in em_sti_probe() clocksource/drivers/arm_arch_timer: Fix mem frame loop initialization
2017-08-20Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365Hans de Goede
The Dell XPS13 9365 has an INT33D2 ACPI node with no GPIOs, causing the following error in dmesg: [ 7.172275] soc_button_array: probe of INT33D2:00 failed with error -2 This commit silences this, by returning -ENODEV when there are no GPIOs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196679 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-08-20Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "Two fixes for the perf subsystem: - Fix an inconsistency of RDPMC mm struct tagging across exec() which causes RDPMC to fault. - Correct the timestamp mechanics across IOC_DISABLE/ENABLE which causes incorrect timestamps and total time calculations" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix time on IOC_ENABLE perf/x86: Fix RDPMC vs. mm_struct tracking
2017-08-20Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A pile of smallish changes all over the place: - Add a missing ISB in the GIC V1 driver - Remove an ACPI version check in the GIC V3 ITS driver - Add the missing irq_pm_shutdown function for BRCMSTB-L2 to avoid spurious wakeups - Remove the artifical limitation of ITS instances to the number of NUMA nodes which prevents utilizing the ITS hardware correctly - Prevent a infinite parsing loop in the GIC-V3 ITS/MSI code - Honour the force affinity argument in the GIC-V3 driver which is required to make perf work correctly - Correctly report allocation failures in GIC-V2/V3 to avoid using half allocated and initialized interrupts. - Fixup checks against nr_cpu_ids in the generic IPI code" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/ipi: Fixup checks against nr_cpu_ids genirq: Restore trigger settings in irq_modify_status() MAINTAINERS: Remove Jason Cooper's irqchip git tree irqchip/gic-v3-its-platform-msi: Fix msi-parent parsing loop irqchip/gic-v3-its: Allow GIC ITS number more than MAX_NUMNODES irqchip: brcmstb-l2: Define an irq_pm_shutdown function irqchip/gic: Ensure we have an ISB between ack and ->handle_irq irqchip/gic-v3-its: Remove ACPICA version check for ACPI NUMA irqchip/gic-v3: Honor forced affinity setting irqchip/gic-v3: Report failures in gic_irq_domain_alloc irqchip/gic-v2: Report failures in gic_irq_domain_alloc irqchip/atmel-aic: Remove root argument from ->fixup() prototype irqchip/atmel-aic: Fix unbalanced refcount in aic_common_rtc_irq_fixup() irqchip/atmel-aic: Fix unbalanced of_node_put() in aic_common_irq_fixup()
2017-08-20Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull watchdog fix from Thomas Gleixner: "A fix for the hardlockup watchdog to prevent false positives with extreme Turbo-Modes which make the perf/NMI watchdog fire faster than the hrtimer which is used to verify. Slightly larger than the minimal fix, which just would increase the hrtimer frequency, but comes with extra overhead of more watchdog timer interrupts and thread wakeups for all users. With this change we restrict the overhead to the extreme Turbo-Mode systems" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/watchdog: Prevent false positives with turbo modes
2017-08-20iio: magnetometer: st_magn: remove ihl property for LSM303AGRLorenzo Bianconi
Remove IRQ active low support for LSM303AGR since the sensor does not support that capability for data-ready line Fixes: a9fd053b56c6 (iio: st_sensors: support active-low interrupts) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20iio: magnetometer: st_magn: fix status register address for LSM303AGRLorenzo Bianconi
Fixes: 97865fe41322 (iio: st_sensors: verify interrupt event to status) Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20iio: hid-sensor-trigger: Fix the race with user space powering up sensorsSrinivas Pandruvada
It has been reported for a while that with iio-sensor-proxy service the rotation only works after one suspend/resume cycle. This required a wait in the systemd unit file to avoid race. I found a Yoga 900 where I could reproduce this. The problem scenerio is: - During sensor driver init, enable run time PM and also set a auto-suspend for 3 seconds. This result in one runtime resume. But there is a check to avoid a powerup in this sequence, but rpm is active - User space iio-sensor-proxy tries to power up the sensor. Since rpm is active it will simply return. But sensors were not actually powered up in the prior sequence, so actaully the sensors will not work - After 3 seconds the auto suspend kicks If we add a wait in systemd service file to fire iio-sensor-proxy after 3 seconds, then now everything will work as the runtime resume will actually powerup the sensor as this is a user request. To avoid this: - Remove the check to match user requested state, this will cause a brief powerup, but if the iio-sensor-proxy starts immediately it will still work as the sensors are ON. - Also move the autosuspend delay to place when user requested turn off of sensors, like after user finished raw read or buffer disable Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Bastien Nocera <hadess@hadess.net> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20iio: trigger: stm32-timer: fix get trigger modeFabrice Gasnier
Fix reading trigger mode, when other bit-fields are set. SMCR register value must be masked to read SMS (slave mode selection) only. Fixes: 9eba381 ("iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20iio: imu: adis16480: Fix acceleration scale factor for adis16480Dragos Bogdan
According to the datasheet, the range of the acceleration is [-10 g, + 10 g], so the scale factor should be 10 instead of 5. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20PATCH] iio: Fix some documentation warningsJonathan Corbet
The kerneldoc description for the trig_readonly field of struct iio_dev lacked a colon, leading to this doc build warning: ./include/linux/iio/iio.h:603: warning: No description found for parameter 'trig_readonly' A similar issue for iio_trigger_set_immutable() in trigger.h yielded: ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'indio_dev' ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'trig' Fix the formatting and silence the warnings. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-20net/mlx5e: Use size_t to store byte offset in statistics descriptorsGal Pressman
The byte offset of counter descriptors should be stored in size_t variable instead of an integer. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Use kernel types instead of uint*_t in ethtool callbacksGal Pressman
Fix checkpatch errors: CHECK:PREFER_KERNEL_TYPES: Prefer kernel type 'u32' over 'uint32_t' Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Place constants on the right side of comparisonsOr Gerlitz
To fix these checkpatch complaints: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Avoid using multiple blank linesOr Gerlitz
To fix these checkpatch complaints: CHECK: Please don't use multiple blank lines Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Properly indent within conditional statementsOr Gerlitz
To fix these checkpatch complaints: WARNING: suspect code indent for conditional statements (8, 24) + if (eth_proto & (MLX5E_PROT_MASK(MLX5E_10GBASE_SR) [...] + return PORT_FIBRE; Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5: Add a blank line after declarationsOr Gerlitz
To fix these checkpatch complaints: WARNING: Missing a blank line after declarations Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5: Avoid blank lines after/before open/close braceOr Gerlitz
To fix these checkpatch complaints: CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Add outbound PCI buffer overflow counterEran Ben Elisha
Add outbound_pci_buffer_overflow to ethtool output for monitoring the number of packets that were dropped due to lack of PCIe buffers on receive path from NIC port toward the host(s). This counter is valid only in case that tx_overflow_buffer_pkt is supported in MCAM enhanced features. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Add RX buffer fullness countersGal Pressman
rx_buffer_passed_thres_phy - The number of events where the port RX buffer has passed a fullness threshold. rx_buffer_full_phy - The number of events where the port RX buffer has reached 100% fullness. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5: Add RX buffer fullness counters infrastructureGal Pressman
Add capability bit in PCAM register and counters to PPCNT register. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Add PCIe outbound stalls countersGal Pressman
outbound_pci_stalled_rd - The percentage of time within the last second that the NIC had outbound non-posted read requests but could not perform the operation due to insufficient non-posted credits. outbound_pci_stalled_wr - The percentage of time within the last second that the NIC had outbound posted writes requests but could not perform the operation due to insufficient posted credits. outbound_pci_stalled_rd_events - The number of events where outbound_pci_stalled_rd was above the threshold. outbound_pci_stalled_wr_events - The number of events where outbound_pci_stalled_wr was above the threshold. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5: Add PCIe outbound stalls counters infrastructureGal Pressman
Add capability bit in MCAM register and counters to MPCNT register. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtoolShalom Lagziel
Add support for "ethtool DEVNAME" over ipoib ports, Display standard port information for IPoIB netdevices using ethtool For example: $ ethtool ib2 > Settings for ib2: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off Link detected: yes Signed-off-by: Shalom Lagziel <shaloml@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: IPoIB, Fix driver name retrieved by ethtoolFeras Daoud
Printing an enhanced IPoIB device information using "ethtool -i DEVNAME", prints the low level driver name: mlx5_core. This commit changes the name to mlx5_core [ib_ipoib], to include the ipoib device driver infromation. Fixes: 076b0936e5fb ("net/mlx5e: IPoIB, Add ethtool support") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Send PAOS command on interface up/downEran Ben Elisha
Upon interface up/down, driver will send PAOS (Ports Administrative and Operational Status Register) in order to inform the Firmware on the desired status of the port by the driver. Since now we might change physical link status on mlx5e_open/close, logical VF representor should not use mlx5e_open/close ndos as is, and should call the logical version mlx5e_open/closed_locked. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20genirq/ipi: Fixup checks against nr_cpu_idsAlexey Dobriyan
Valid CPU ids are [0, nr_cpu_ids-1] inclusive. Fixes: 3b8e29a82dd1 ("genirq: Implement ipi_send_mask/single()") Fixes: f9bce791ae2a ("genirq: Add a new function to get IPI reverse mapping") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170819095751.GB27864@avx2
2017-08-20ALSA: firewire-motu: destroy stream data surely at failure of card ↵Takashi Sakamoto
initialization When failing sound card registration after initializing stream data, this module leaves allocated data in stream data. This commit fixes the bug. Fixes: 9b2bb4f2f4a2 ('ALSA: firewire-motu: add stream management functionality') Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-20ALSA: firewire: fix NULL pointer dereference when releasing uninitialized ↵Takashi Sakamoto
data of iso-resource When calling 'iso_resource_free()' for uninitialized data, this function causes NULL pointer dereference due to its 'unit' member. This occurs when unplugging audio and music units on IEEE 1394 bus at failure of card registration. This commit fixes the bug. The bug exists since kernel v4.5. Fixes: 324540c4e05c ('ALSA: fireface: postpone sound card registration') at v4.12 Fixes: 8865a31e0fd8 ('ALSA: firewire-motu: postpone sound card registration') at v4.12 Fixes: b610386c8afb ('ALSA: firewire-tascam: deleyed registration of sound card') at v4.7 Fixes: 86c8dd7f4da3 ('ALSA: firewire-digi00x: delayed registration of sound card') at v4.7 Fixes: 6c29230e2a5f ('ALSA: oxfw: delayed registration of sound card') at v4.7 Fixes: 7d3c1d5901aa ('ALSA: fireworks: delayed registration of sound card') at v4.7 Fixes: 04a2c73c97eb ('ALSA: bebob: delayed registration of sound card') at v4.7 Fixes: b59fb1900b4f ('ALSA: dice: postpone card registration') at v4.5 Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-19bpf: linux/bpf.h needs linux/numa.hDavid S. Miller
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19Merge branch 'BPF-inline-improvements'David S. Miller
Daniel Borkmann says: ==================== BPF inline improvements First one makes htab inlining more robust wrt future jits and second one inlines map in map lookups through map_gen_lookup() callback. v1 -> v2: - BITS_PER_LONG guard in patch 1 - BPF_EMIT_CALL is on __htab_map_lookup_elem ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19bpf: inline map in map lookup functions for array and htabDaniel Borkmann
Avoid two successive functions calls for the map in map lookup, first is the bpf_map_lookup_elem() helper call, and second the callback via map->ops->map_lookup_elem() to get to the map in map implementation. Implementation inlines array and htab flavor for map in map lookups. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19bpf: make htab inlining more robust wrt assumptionsDaniel Borkmann
Commit 9015d2f59535 ("bpf: inline htab_map_lookup_elem()") was making the assumption that a direct call emission to the function __htab_map_lookup_elem() will always work out for JITs. This is currently true since all JITs we have are for 64 bit archs, but in case of 32 bit JITs like upcoming arm32, we get a NULL pointer dereference when executing the call to __htab_map_lookup_elem() since passed arguments are of a different size (due to pointer args) than what we do out of BPF. Guard and thus limit this for now for the current 64 bit JITs only. Reported-by: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19Merge branch 'bpf-Allow-selecting-numa-node-during-map-creation'David S. Miller
Martin KaFai Lau says: ==================== bpf: Allow selecting numa node during map creation This series allows user to pick the numa node during map creation. The first patch has the details ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19bpf: Allow numa selection in INNER_LRU_HASH_PREALLOC test of map_perf_testMartin KaFai Lau
This patch makes the needed changes to allow each process of the INNER_LRU_HASH_PREALLOC test to provide its numa node id when creating the lru map. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19bpf: Allow selecting numa node during map creationMartin KaFai Lau
The current map creation API does not allow to provide the numa-node preference. The memory usually comes from where the map-creation-process is running. The performance is not ideal if the bpf_prog is known to always run in a numa node different from the map-creation-process. One of the use case is sharding on CPU to different LRU maps (i.e. an array of LRU maps). Here is the test result of map_perf_test on the INNER_LRU_HASH_PREALLOC test if we force the lru map used by CPU0 to be allocated from a remote numa node: [ The machine has 20 cores. CPU0-9 at node 0. CPU10-19 at node 1 ] ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1628380 events per sec 4:inner_lru_hash_map_perf pre-alloc 1626396 events per sec 3:inner_lru_hash_map_perf pre-alloc 1626144 events per sec 6:inner_lru_hash_map_perf pre-alloc 1621657 events per sec 2:inner_lru_hash_map_perf pre-alloc 1621534 events per sec 1:inner_lru_hash_map_perf pre-alloc 1620292 events per sec 7:inner_lru_hash_map_perf pre-alloc 1613305 events per sec 0:inner_lru_hash_map_perf pre-alloc 1239150 events per sec #<<< After specifying numa node: ># taskset -c 10 ./map_perf_test 512 8 1260000 8000000 5:inner_lru_hash_map_perf pre-alloc 1629627 events per sec 3:inner_lru_hash_map_perf pre-alloc 1628057 events per sec 1:inner_lru_hash_map_perf pre-alloc 1623054 events per sec 6:inner_lru_hash_map_perf pre-alloc 1616033 events per sec 2:inner_lru_hash_map_perf pre-alloc 1614630 events per sec 4:inner_lru_hash_map_perf pre-alloc 1612651 events per sec 7:inner_lru_hash_map_perf pre-alloc 1609337 events per sec 0:inner_lru_hash_map_perf pre-alloc 1619340 events per sec #<<< This patch adds one field, numa_node, to the bpf_attr. Since numa node 0 is a valid node, a new flag BPF_F_NUMA_NODE is also added. The numa_node field is honored if and only if the BPF_F_NUMA_NODE flag is set. Numa node selection is not supported for percpu map. This patch does not change all the kmalloc. F.e. 'htab = kzalloc()' is not changed since the object is small enough to stay in the cache. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19bnxt_en: fix spelling mistake: "swtichdev" -> "switchdev"Colin Ian King
Trivial fix to spelling mistake in a netdev_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: hns3: fix a handful of spelling mistakesColin Ian King
Trival fix to spelling mistakes: firware -> firmware invald -> invalid mutilcast -> multicast Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19Merge branch 'net-const-eisa_device_id'David S. Miller
Arvind Yadav says: ==================== constify net eisa_device_id eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: defxx: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: hp100: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: de4x5: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: 3c59x: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: 3c509: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 02:57:16 +0000