Age | Commit message (Collapse) | Author |
|
endpoint descriptor
The Miditech MIDIFACE 16x16 (USB ID 1290:1749) has more than one extra
endpoint descriptor.
The first extra descriptor is: 0x06 0x30 0x00 0x00 0x00 0x00
As the code in snd_usbmidi_get_ms_info() looks only at the
first extra descriptor to find USB_DT_CS_ENDPOINT the device
as such is recognized but there is neither input nor output
configured.
The patch iterates through the extra descriptors to find the
proper one. With this patch the device is correctly configured.
Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Link: https://lore.kernel.org/r/1c3b431a86f69e1d60745b6110cdb93c299f120b.camel@domdv.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit 645c08f17f477915f6d900b767e789852f150054
which was reported to break the build a program using this header.
The original issue was addressed in the alsa-lib side recently, so we
can make the header more self-contained again.
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Fixes: 645c08f17f47 ("ALSA: uapi: Drop asound.h inclusion from asoc.h")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200331090023.8112-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
patch_realtek.c has historically failed to properly configure the PC
Beep Hidden Register for the ALC256 codec (among others). Depending on
your kernel version, symptoms of this misconfiguration can range from
chassis noise, picked up by a poorly-shielded PCBEEP trace, getting
amplified and played on your internal speaker and/or headphones to loud
feedback, which responds to the "Headphone Mic Boost" ALSA control,
getting played through your headphones. For details of the problem, see
the patch in this series titled "ALSA: hda/realtek - Set principled PC
Beep configuration for ALC256", which fixes the configuration.
These symptoms have been most noticed on the Dell XPS 13 9350 and 9360,
popular laptops that use the ALC256. As a result, several model-specific
fixups have been introduced to try and fix the problem, the most
egregious of which locks the "Headphone Mic Boost" control as a hack to
minimize noise from a feedback loop that shouldn't have been there in
the first place.
Now that the underlying issue has been fixed, remove all these fixups.
Remaining fixups needed by the XPS 13 are all picked up by existing pin
quirks.
This change should, for the XPS 13 9350/9360
- Significantly increase volume and audio quality on headphones
- Eliminate headphone popping on suspend/resume
- Allow "Headphone Mic Boost" to be set again, making the headphone
jack fully usable as a microphone jack too.
Fixes: 8c69729b4439 ("ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3")
Fixes: 423cd785619a ("ALSA: hda - Fix headphone noise on Dell XPS 13 9360")
Fixes: e4c9fd10eb21 ("ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant")
Fixes: 1099f48457d0 ("ALSA: hda/realtek: Reduce the Headphone static noise on XPS 9350/9360")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/b649a00edfde150cf6eebbb4390e15e0c2deb39a.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Realtek PC Beep Hidden Register[1] is currently set by
patch_realtek.c in two different places:
In alc_fill_eapd_coef(), it's set to the value 0x5757, corresponding to
non-beep input on 1Ah and no 1Ah loopback to either headphones or
speakers. (Although, curiously, the loopback amp is still enabled.) This
write was added fairly recently by commit e3743f431143 ("ALSA:
hda/realtek - Dell headphone has noise on unmute for ALC236") and is a
safe default. However, it happens in the wrong place:
alc_fill_eapd_coef() runs on module load and cold boot but not on S3
resume, meaning the register loses its value after suspend.
Conversely, in alc256_init(), the register is updated to unset bit 13
(disable speaker loopback) and set bit 5 (set non-beep input on 1Ah).
Although this write does run on S3 resume, it's not quite enough to fix
up the register's default value of 0x3717. What's missing is a set of
bit 14 to disable headphone loopback. Without that, we end up with a
feedback loop where the headphone jack is being driven by amplified
samples of itself[2].
This change eliminates the update in alc256_init() and replaces it with
the 0x5757 write from alc_fill_eapd_coef(). Kailang says that 0x5757 is
supposed to be the codec's default value, so using it will make
debugging easier for Realtek.
Affects the ALC255, ALC256, ALC257, ALC235, and ALC236 codecs.
[1] Newly documented in Documentation/sound/hd-audio/realtek-pc-beep.rst
[2] Setting the "Headphone Mic Boost" control from userspace changes
this feedback loop and has been a widely-shared workaround for headphone
noise on laptops like the Dell XPS 13 9350. This commit eliminates the
feedback loop and makes the workaround unnecessary.
Fixes: e1e8c1fdce8b ("ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bf22b417d1f2474b12011c2a39ed6cf8b06d3bf5.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This codec (among others) has a hidden set of audio routes, apparently
designed to allow PC Beep output without a mixer widget on the output
path, which are controlled by an undocumented Realtek vendor register.
The default configuration of these routes means that certain inputs
aren't accessible, necessitating driver control of the register.
However, Realtek has provided no documentation of the register, instead
opting to fix issues by providing magic numbers, most of which have been
at least somewhat erroneous. These magic numbers then get copied by
others into model-specific fixups, leading to a fragmented and buggy set
of configurations.
To get out of this situation, I've reverse engineered the register by
flipping bits and observing how the codec's behavior changes. This
commit documents my findings. It does not change any code.
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/bd69dfdeaf40ff31c4b7b797c829bb320031739c.1585584498.git.tommyhebb@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After an endpoint is started through configfs, if 0 is written to the
configfs entry 'start', the controller stops but the epc_group->start
value remains 1.
A subsequent unlinking of the function from the controller would trigger
a spurious WARN_ON_ONCE() in pci_epc_epf_unlink() despite right
behavior.
Fix it by setting epc_group->start = 0 when a controller is stopped
using configfs.
Fixes: d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Add support for the endpoint mode of Synopsys DesignWare core based
dual mode PCIe controllers present in Tegra194 SoC.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
Set logo_shown to FBCON_LOGO_CANSHOW when the vc was deallocated.
syzkaller report: https://lkml.org/lkml/2020/3/27/403
general protection fault, probably for non-canonical address
0xdffffc000000006c: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000360-0x0000000000000367]
RIP: 0010:fbcon_switch+0x28f/0x1740
drivers/video/fbdev/core/fbcon.c:2260
Call Trace:
redraw_screen+0x2a8/0x770 drivers/tty/vt/vt.c:1008
vc_do_resize+0xfe7/0x1360 drivers/tty/vt/vt.c:1295
fbcon_init+0x1221/0x1ab0 drivers/video/fbdev/core/fbcon.c:1219
visual_init+0x305/0x5c0 drivers/tty/vt/vt.c:1062
do_bind_con_driver+0x536/0x890 drivers/tty/vt/vt.c:3542
do_take_over_console+0x453/0x5b0 drivers/tty/vt/vt.c:4122
do_fbcon_takeover+0x10b/0x210 drivers/video/fbdev/core/fbcon.c:588
fbcon_fb_registered+0x26b/0x340 drivers/video/fbdev/core/fbcon.c:3259
do_register_framebuffer drivers/video/fbdev/core/fbmem.c:1664 [inline]
register_framebuffer+0x56e/0x980 drivers/video/fbdev/core/fbmem.c:1832
dlfb_usb_probe.cold+0x1743/0x1ba3 drivers/video/fbdev/udlfb.c:1735
usb_probe_interface+0x310/0x800 drivers/usb/core/driver.c:374
accessing vc_cons[logo_shown].d->vc_top causes the bug.
Reported-by: syzbot+732528bae351682f1f27@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200329085647.25133-1-hqjagain@gmail.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
A bit smaller this time around.. there are still a couple uabi
additions for vulkan waiting in the wings, but I punted on them this
cycle due to running low on time. (They should be easy enough to
rebase, and if it is a problem for anyone I can push a next+uabi
branch so that tu work can proceed.)
The bigger change is refactoring dpu resource manager and moving dpu
to use atomic global state. Other than that, it is mostly cleanups
and fixes.
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGuf1R4Xz-t9Z7_cwx9jD=b4wUvvwfqA5cHR8fCSXSd5XQ@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
msm needed rc6, so I just went and merged release
(msm has been in drm-next outside of this tree)
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
|
|
Add below two callback interfaces in struct f2fs_compress_ops:
int (*init_decompress_ctx)(struct decompress_io_ctx *dic);
void (*destroy_decompress_ctx)(struct decompress_io_ctx *dic);
Which will be used by zstd compress algorithm later.
In addition, this patch adds callback function pointer check, so that
specified algorithm can avoid defining unneeded functions.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Otherwise, it will cause memory leak.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use LZ4 as default compression algorithm, as compared to LZO, it shows
almost the same compression ratio and much better decompression speed.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
{cic,dic}.ref should be initialized to number of compressed pages,
let's initialize it directly rather than doing w/
f2fs_set_compressed_page().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Multipage read flow should consider fsverity, so it needs to use
f2fs_readpage_limit() instead of i_size_read() to check EOF condition.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Fix gcc warnings:
In file included from fs/f2fs/dir.c:15:0:
fs/f2fs/xattr.h:157:13: warning: 'f2fs_destroy_xattr_caches' defined but not used [-Wunused-function]
static void f2fs_destroy_xattr_caches(struct f2fs_sb_info *sbi) { }
^~~~~~~~~~~~~~~~~~~~~~~~~
fs/f2fs/xattr.h:156:12: warning: 'f2fs_init_xattr_caches' defined but not used [-Wunused-function]
static int f2fs_init_xattr_caches(struct f2fs_sb_info *sbi) { return 0; }
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: a999150f4fe3 ("f2fs: use kmem_cache pool during inline xattr lookups")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
On image that has verity and compression feature, if compressed pages
and non-compressed pages are mixed in one bio, we may double unlock
non-compressed page in below flow:
- f2fs_post_read_work
- f2fs_decompress_work
- f2fs_decompress_bio
- __read_end_io
- unlock_page
- fsverity_enqueue_verify_work
- f2fs_verity_work
- f2fs_verify_bio
- unlock_page
So it should skip handling non-compressed page in f2fs_decompress_work()
if verity is on.
Besides, add missing dec_page_count() in f2fs_verify_bio().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs_inode_info.flags is unsigned long variable, it has 32 bits
in 32bit architecture, since we introduced FI_MMAP_FILE flag
when we support data compression, we may access memory cross
the border of .flags field, corrupting .i_sem field, result in
below deadlock.
To fix this issue, let's expand .flags as an array to grab enough
space to store new flags.
Call Trace:
__schedule+0x8d0/0x13fc
? mark_held_locks+0xac/0x100
schedule+0xcc/0x260
rwsem_down_write_slowpath+0x3ab/0x65d
down_write+0xc7/0xe0
f2fs_drop_nlink+0x3d/0x600 [f2fs]
f2fs_delete_inline_entry+0x300/0x440 [f2fs]
f2fs_delete_entry+0x3a1/0x7f0 [f2fs]
f2fs_unlink+0x500/0x790 [f2fs]
vfs_unlink+0x211/0x490
do_unlinkat+0x483/0x520
sys_unlink+0x4a/0x70
do_fast_syscall_32+0x12b/0x683
entry_SYSENTER_32+0xaa/0x102
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
If both compression and fsverity feature is on, generic/572 will
report below NULL pointer dereference bug.
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:f2fs_verity_work+0x60/0x90 [f2fs]
#PF: supervisor read access in kernel mode
Workqueue: fsverity_read_queue f2fs_verity_work [f2fs]
RIP: 0010:f2fs_verity_work+0x60/0x90 [f2fs]
Call Trace:
process_one_work+0x16c/0x3f0
worker_thread+0x4c/0x440
? rescuer_thread+0x350/0x350
kthread+0xf8/0x130
? kthread_unpark+0x70/0x70
ret_from_fork+0x35/0x40
There are two issue in f2fs_verity_work():
- it needs to traverse and verify all pages in bio.
- if pages in bio belong to non-compressed cluster, accessing
decompress IO context stored in page private will cause NULL
pointer dereference.
Fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_decompress_end_io(), we should clear PG_error flag before page
unlock, otherwise reread will fail due to the flag as described in
commit fb7d70db305a ("f2fs: clear PageError on the read path").
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In f2fs_tmpfile(), parent inode's encryption info is only used when
inheriting encryption context to its child inode, however, we have
already called fscrypt_get_encryption_info() in fscrypt_inherit_context()
to get the encryption info, so just removing unneeded one in
f2fs_tmpfile().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Data flush can generate heavy IO and cause long latency during
flush, so it's not appropriate to trigger it in foreground
operation.
And also, we may face below potential deadlock during data flush:
- f2fs_write_multi_pages
- f2fs_write_raw_pages
- f2fs_write_single_data_page
- f2fs_balance_fs
- f2fs_balance_fs_bg
- f2fs_sync_dirty_inodes
- filemap_fdatawrite -- stuck on flush same cluster
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs]
Call Trace:
f2fs_quota_write+0x139/0x1d0 [f2fs]
write_blk+0x36/0x80 [quota_tree]
get_free_dqblk+0x42/0xa0 [quota_tree]
do_insert_tree+0x235/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
qtree_write_dquot+0x70/0x190 [quota_tree]
v2_write_dquot+0x43/0x90 [quota_v2]
dquot_acquire+0x77/0x100
f2fs_dquot_acquire+0x2f/0x60 [f2fs]
dqget+0x310/0x450
dquot_transfer+0x7e/0x120
f2fs_setattr+0x11a/0x4a0 [f2fs]
notify_change+0x349/0x480
chown_common+0x168/0x1c0
do_fchownat+0xbc/0xf0
__x64_sys_fchownat+0x20/0x30
do_syscall_64+0x5f/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(),
so that if quota file is compressed one, we can avoid above NULL
pointer dereference when updating quota content.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Merge below two conditions into f2fs_may_encrypt() for cleanup
- IS_ENCRYPTED()
- DUMMY_ENCRYPTION_ENABLED()
Check IS_ENCRYPTED(inode) condition in f2fs_init_inode_metadata()
is enough since we have already set encrypt flag in f2fs_new_inode().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We should always check F2FS_I(inode)->cp_task condition in prior to other
conditions in __should_serialize_io() to avoid deadloop described in
commit 040d2bb318d1 ("f2fs: fix to avoid deadloop if data_flush is on"),
however we break this rule when we support compression, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In order to shrink page lock coverage.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
generic/232 reports below deadlock:
fsstress D 0 96980 96969 0x00084000
Call Trace:
schedule+0x4a/0xb0
io_schedule+0x12/0x40
__lock_page+0x127/0x1d0
pagecache_get_page+0x1d8/0x250
prepare_compress_overwrite+0xe0/0x490 [f2fs]
f2fs_prepare_compress_overwrite+0x5d/0x80 [f2fs]
f2fs_write_begin+0x833/0xb90 [f2fs]
f2fs_quota_write+0x145/0x1e0 [f2fs]
write_blk+0x36/0x80 [quota_tree]
do_insert_tree+0x2ac/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
qtree_write_dquot+0x70/0x190 [quota_tree]
v2_write_dquot+0x43/0x90 [quota_v2]
dquot_acquire+0x77/0x100
f2fs_dquot_acquire+0x2f/0x60 [f2fs]
dqget+0x310/0x450
dquot_transfer+0xb2/0x120
f2fs_setattr+0x11a/0x4a0 [f2fs]
notify_change+0x349/0x480
chown_common+0x168/0x1c0
do_fchownat+0xbc/0xf0
__x64_sys_lchown+0x21/0x30
do_syscall_64+0x5f/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
task PC stack pid father
kworker/u256:0 D 0 103444 2 0x80084000
Workqueue: writeback wb_workfn (flush-251:1)
Call Trace:
schedule+0x4a/0xb0
schedule_timeout+0x15e/0x2f0
io_schedule_timeout+0x19/0x40
congestion_wait+0x7e/0x120
f2fs_write_multi_pages+0x12a/0x840 [f2fs]
f2fs_write_cache_pages+0x48f/0x790 [f2fs]
f2fs_write_data_pages+0x2db/0x330 [f2fs]
do_writepages+0x1a/0x60
__writeback_single_inode+0x3d/0x340
writeback_sb_inodes+0x225/0x4a0
wb_writeback+0xf7/0x320
wb_workfn+0xba/0x470
process_one_work+0x16c/0x3f0
worker_thread+0x4c/0x440
kthread+0xf8/0x130
ret_from_fork+0x35/0x40
fsstress D 0 5277 5266 0x00084000
Call Trace:
schedule+0x4a/0xb0
rwsem_down_write_slowpath+0x29d/0x540
block_operations+0x105/0x360 [f2fs]
f2fs_write_checkpoint+0x101/0x1010 [f2fs]
f2fs_sync_fs+0xa8/0x130 [f2fs]
f2fs_do_sync_file+0x1ad/0x890 [f2fs]
do_fsync+0x38/0x60
__x64_sys_fdatasync+0x13/0x20
do_syscall_64+0x5f/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The root cause is there is potential deadlock between quota data
update and writeback.
Kworker Thread B Thread C
- f2fs_write_cache_pages
- lock whole cluster --- A
- f2fs_write_multi_pages
- f2fs_write_raw_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- f2fs_setattr
- f2fs_lock_op --- B
- f2fs_write_checkpoint
- block_operations
- f2fs_lock_all --- B
- dquot_transfer
- f2fs_quota_write
- f2fs_prepare_compress_overwrite
- pagecache_get_page --- A
- f2fs_trylock_op failed --- B
- congestion_wait
- goto rewrite
To fix this issue, during quota file writeback, just redirty all pages
left in cluster rather holding pages' lock in cluster and looping retrying
lock cp_rwsem.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This lock can be a contention with multi 4k random read IO with single inode.
example) fio --output=test --name=test --numjobs=60 --filename=/media/samsung960pro/file_test --rw=randread --bs=4k
--direct=1 --time_based --runtime=7 --ioengine=libaio --iodepth=256 --group_reporting --size=10G
With this commit, it remove that possible lock contention.
Signed-off-by: Dongjoo Seo <commisori28@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
- f2fs_iget
- do_read_inode
- set_inode_flag(, FI_COMPRESSED_FILE)
- __mark_inode_dirty_flag(, true)
It's unnecessary, so let's just mark compressed inode dirty while
compressed inode conversion.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In case memory resources for dummy_data were allocated, release them
before return.
Addresses-Coverity-ID: 1491997 ("Resource leak")
Fixes: 7ef19d3b1d5e ("devlink: report error once U32_MAX snapshot ids have been used")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Voon Weifeng says:
====================
stmmac: Add additional EHL PCI info and PCI ID
Thanks Jose Miguel Abreu for the feedback. Summary of v2 patches:
1/3: As suggested to keep the stmmac_pci.c file simple. So created a new
file dwmac-intel.c and moved all the Intel specific PCI device out
of stmmac_pci.c.
2/3: Added Intel(R) Programmable Services Engine (Intel(R) PSE) MAC PCI ID
and PCI info
3/3: Added EHL 2.5Gbps PCI ID and info
Changes from v1:
-Added a patch to move all Intel specific PCI device from stmmac_pci.c to
a new file named dwmac-intel.c.
-Combine v1 patch 1/3 and 2/3 into single patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add EHL SGMII 2.5Gbps PCI info and PCI ID
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add EHL PSE0/1 RGMII & SGMII 1Gbps PCI info and PCI ID
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As stmmac_pci.c file is getting bigger and more complex, it is reasonable
to separate all the Intel specific dwmac pci device to a different file.
This move includes Intel Quark, TGL and EHL. A new kernel config
CONFIG_DWMAC_INTEL is introduced and depends on X86. For this initial
patch, all the necessary function such as probe() and exit() are identical
besides the function name.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Fainelli says:
====================
net: dsa: b53 & bcm_sf2 updates for 7278
This patch series contains some updates to the b53 and bcm_sf2 drivers
specifically for the 7278 Ethernet switch.
The first patch is technically a bug fix so it should ideally be
backported to -stable, provided that Dan also agress with my resolution
on this.
Patches #2 through #4 are minor changes to the core b53 driver to
restore VLAN configuration upon system resumption as well as deny
specific bridge/VLAN operations on port 7 with the 7278 which is special
and does not support VLANs.
Patches #5 through #9 add support for matching VLAN TCI keys/masks to
the CFP code.
Changes in v2:
- fixed some code comments and arrange some code for easier reading
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The port to which the ASP is connected on 7278 is not capable of
processing VLAN tags as part of the Ethernet frame, so allow an user to
configure the egress VLAN policy they want to see applied by purposing
the h_ext.data[1] field. Bit 0 is used to indicate that 0=tagged,
1=untagged.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update relevant code paths to support the programming and matching of
VLAN TCI, this is the only member of the ethtool_flow_ext that we can
match, the switch does not permit matching the VLAN Ethernet Type field.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for matching VLANs, move the writing of CFP_DATA(5) into
the IPv4 and IPv6 slicing logic since they are part of the per-flow
configuration.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We do not currently support matching on FLOW_EXT or FLOW_MAC_EXT, but we
were not checking for those bits being set in the flow specification.
The check for FLOW_EXT and FLOW_MAC_EXT are separated out because a
subsequent commit will add support for matching VLAN TCI which are
covered by FLOW_EXT.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We don't want to enable learning for the ASP port since it only receives
directed traffic, this allows us to bypass ARL-driven forwarding rules
which could conflict with Broadcom tags and/or CFP forwarding.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On 7278, port 7 connects to the ASP which should only receive frames
through the use of CFP rules, it is not desirable to have it be part of
a bridge at all since that would make it pick up unwanted traffic that
it may not even be able to filter or sustain.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On 7278, port 7 of the switch connects to the ASP UniMAC which is not
capable of processing VLAN tagged frames. We can still allow the port to
be part of a VLAN entry, and we may want it to be untagged on egress on
that VLAN because of that limitation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The first time b53_configure_vlan() is called we have not configured any
VLAN entries yet, since that happens later when interfaces get brought
up. When b53_configure_vlan() is called again from suspend/resume we
need to restore all VLAN entries though.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing
set_rxnfc") tried to fix the some user controlled buffer overflows in
bcm_sf2_cfp_rule_set() and bcm_sf2_cfp_rule_del() but the fix was using
CFP_NUM_RULES, which while it is correct not to overflow the bitmaps, is
not representative of what the device actually supports. Correct that by
using bcm_sf2_cfp_rule_size() instead.
The latter subtracts the number of rules by 1, so change the checks from
greater than or equal to greater than accordingly.
Fixes: f949a12fd697 ("net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"A series of commits to make the MSR derived CPU and TSC frequency more
accurate.
It turned out that the frequency tables which have been taken from the
SDM are inaccurate because the SDM provides truncated and rounded
values, e.g. 83.3Mhz (83.3333...) or 116.7Mhz (116.6666...).
This causes time drift in the range of ~1 second per hour (20-30
seconds per day). On some of these SoCs it's not possible to
recalibrate the TSC because there is no reference (PIT, HPET)
available.
With some reverse engineering it was established that the possible
frequencies are derived from the base clock with fixed multiplier /
divider pairs.
For the CPU models which have a known crystal frequency the kernel now
uses multiplier / divider pairs which bring the frequencies closer to
reality and fix the observed time drift issues"
* tag 'x86-timers-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc_msr: Make MSR derived TSC frequency more accurate
x86/tsc_msr: Fix MSR_FSB_FREQ mask for Cherry Trail devices
x86/tsc_msr: Use named struct initializers
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vzalloc_node(), already rounds the total size to whole pages, and
sizeof(u64) is smaller than sizeof(struct recv_comp_data). So
round_up of recv_completion_cnt is not necessary, and may cause extra
memory allocation.
To save memory, remove this unnecessary round_up for recv_completion_cnt.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
1) Add support to specify a stateful expression in set definitions,
this allows users to specify e.g. counters per set elements.
2) Flowtable software counter support.
3) Flowtable hardware offload counter support, from wenxu.
3) Parallelize flowtable hardware offload requests, from Paul Blakey.
This includes a patch to add one work entry per offload command.
4) Several patches to rework nf_queue refcount handling, from Florian
Westphal.
4) A few fixes for the flowtable tunnel offload: Fix crash if tunneling
information is missing and set up indirect flow block as TC_SETUP_FT,
patch from wenxu.
5) Stricter netlink attribute sanity check on filters, from Romain Bellan
and Florent Fourcot.
5) Annotations to make sparse happy, from Jules Irenge.
6) Improve icmp errors in debugging information, from Haishuang Yan.
7) Fix warning in IPVS icmp error debugging, from Haishuang Yan.
8) Fix endianess issue in tcp extension header, from Sergey Marinkevich.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Thomas Gleixner:
"Support for 'split lock' detection:
Atomic operations (lock prefixed instructions) which span two cache
lines have to acquire the global bus lock. This is at least 1k cycles
slower than an atomic operation within a cache line and disrupts
performance on other cores. Aside of performance disruption this is a
unpriviledged form of DoS.
Some newer CPUs have the capability to raise an #AC trap when such an
operation is attempted. The detection is by default enabled in warning
mode which will warn once when a user space application is caught. A
command line option allows to disable the detection or to select fatal
mode which will terminate offending applications with SIGBUS"
* tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Avoid runtime reads of the TEST_CTRL MSR
x86/split_lock: Rework the initialization flow of split lock detection
x86/split_lock: Enable split lock detection by kernel
|